View
0
Download
0
Category
Preview:
Citation preview
Tech
nica
l Gui
de
www.sliders-uk.com
Part of the exclusive range available from Sliders UK
The Ultimate EvolutionAluminium bi-folding door
Cutting-edge innovation, Ultra slim sightlines and installation in as little as 45 minutes
End-user appeal and high margin ‘engineered-in’The Ultimate Evolution redefines bi-folding door design with a ‘hardware-first approach’.
It’s built around the latest innovation in hardware design, which ensures not only effortless operation and reliability – but also makes installation far simpler.
With ultra slim sightlines, a wide choice of colours, multiple threshold and double and triple glazed options,the Ultimate Evolution is an aluminium bi-folding door that delivers on end-user appeal – but also through-life performance.
1
ww
w.s
lider
s-uk
.com
Structural strengthThe Ultimate Evolution taps into the inherent strength of aluminium to deliver slim sightlines but also incredible design flexibility, accommodating larger individual panels, and multiple configurations to span openings of up to 8400mm*.
Advanced performanceA 30mm polyamide thermal break delivers impressive U-values, while the Ultimate Evolution is also fully BS6375 Weather Tested.
Exacting detail and flexibility in design BS6375 Weather Tested
PAS24 and Part Q approved
PAS24 tested and Part Q* compliant, the Ultimate Evolution features dedicated shoot-bolt intermediate locks operated by low projection handles and top shoot bolt for doors over 2500mm tall. Traffic doors incorporate a three-point dead latch and hook lock with dedicated strike plates.
ww
w.s
lider
s-uk
.com
3*Specified options only.*Subject to specific site conditions and wind loads.
Installation in 45-minutes
Simplified door squaring and settingIts’ highly innovative fully adjustable jamb means that the Ultimate Evolution is a highly ‘forgiving’ bi-fold to fit.
The easy-adjustment system delivers up to 8mm of tolerance, making if far simpler to align the door - even where apertures are out of square.
This dramatically simplifies door squaring and setting which means the Ultimate Evolution can be installed in as little as 45-minutes.
Standard profile coloursThe Ultimate Evolution is available in white, anthracite grey and anthracite grey-on-white, as standard.
We can also offer any RAL colour or combination of colours, on special order.
Polyester powder coated to BS/EN12206-1:2004, minimum finish thicknesses are 40 microns.
The finish is also guaranteed for 10-years.
Colour-matched hardwareThe Ultimate Evolution is also available in colour matched hardware plus chrome and satin finishes.
Finish options
Adjustable Jambs
Outerframe detail with adjustable jambs
5
ww
w.s
lider
s-uk
.com
Internal
External
Features and Benefits
• Maximum height 3000mm (with lock extension)• Maximum width 1200mm• Maximum sash weight 120kg• Multiple threshold options• Adjustable jambs for easy installation and adjustment• Ultra smooth bottom running• Slim sightlines• Stock colours on short reliable lead times• Dual Colour & Special Finishes available
• Intermediate doors have concealed shoot bolt locking with single point handle. Key locking optional
• Colour matched handles and magnetic door holders
7 Left 7 Right with bottom rolling• Opening either in or out• 30mm polyamide thermal break for increased thermal values• Inline system with sash and outer frame the same depth• Tested to BS6375-1:2004 and achieved Severe Weather Rating• Document Q Compliant, Including PAS 24 and BS6375 Part 1 & 2
Size & Weight Restrictions
* Indicates Document Q Compliance not available with this scheme (and it’s reverse, eg. 202 and 220).
Max Min
Overall Height: 3000mm 1800mm
Overall Width: 7000mm 1600mm
Max Panel Width: 1200mm 600mm
Weight Per Panel: 120KG
Prior to delivery, Sliders Ultimate folding and sliding doors will be fully assembled and their operation carefully checked.
No responsibility will be accepted unless the doors have been installed fully square and level in accordance with the code of practice for the installation of aluminium doors and windows (COP)W362/2.
Stock Colour Options
RAL 9910 White Gloss RAL 7016 Outside
RAL 7016 Anthracite Grey Matt RAL 7016 Inside
Sliders (UK) Limited Unit 232, Oldfield Road, Walton Summit, Bamber Bridge, Lancashire PR5 8BGT : 01772 698222 F : 01772 698333 E : sales@sliders-uk.com W: www.sliders-uk.com
Follow us on Twitter: twitter.com/sliders_uk
EVO Aluminium
The
2-0-2* 3-3-0 3-2-1 4-1-3 4-4-0* 4-2-2*
5-5-0 5-4-1 5-3-2 6-1-5
6-3-3 6-6-0* 6-2-4* 7-7-0
7-1-6 7-2-5
6.00±4.00
127.70mm [5"]
Outerframe detail with adjustable jambs
Adjustable Jambs Easy Installation
For ease of installation our new bi-fold system comes with adjustable jambs to both sides
These allow installers to correct issues that can sometimes take hours or days of repeat visits to sort out.
NB: Toe and heeling of sashes is still required.
45
Slim sightlines and inline system with sash and outer frame the same depth
Adjustable jamb – simplified squaring and setting
Ultra-smooth bottom running
Internally glazed accommodating 28mm and 35mm (triple glazed) IGUs
Standard colour options
Door handle options
Black White Anthracite Grey Chrome Satin
Anthracite Grey White Anthracite Grey on White
Technical informationCross sectionsConfigurations
*Indicates Document Q Compliance not available with this scheme (and it’s reverse, eg. 202 and 220).
With inward and outward opening options, the Ultimate Evolution offers exceptional design flexibility with 16 different configurations up to a maximum seven individual panels.
Intermediate lock with hinges and shoot-bolt Swing door jamb detail with adjustable section
7-1-6 7-2-5
6-3-3 6-6-0* 6-2-4* 7-7-0
5-5-0 5-4-1 5-3-2 6-1-5
2-0-2* 3-3-0 3-2-1 4-1-3 4-4-0* 4-2-2* 28 DGU
28 DGU
133
Ove
rall
Wid
th
61.5
61.5
10
INSIDE OUTSIDE
INSIDE OUTSIDE
73
73
Issued: DES 2016 DO NOT SCALE
Locking interm. with hinges and shoot bolt (DBE`102) - Open out
4A
46
28 DGU
73
6
130.
7 O
vera
ll W
idth
69.2
61.5
56.2
13
69.2
DBE-304
Seal withLow ModulusSiliconeSealant AfterFinalAdjustment
INSIDE OUTSIDE
8.1
55
73
*Note: Use DBA1-140 Brush instead of DBA1-138
on outer frame, to prevent binding if sliding post
DBE-202 is used.
Issued: DES 2016 DO NOT SCALE
Swing door jamb detail with adjustable section (DBE102) - Open out
6A
50
7
ww
w.s
lider
s-uk
.com
Technical information Threshold options The Ultimate Evolution
Standard threshold Maximum sash height and width 3000mm x 1200mm (maximum individual panel weight 120kg)
Multiple configurations including open in or out
Ultra-smooth bottom running
Adjustable jamb – simplified squaring and setting
Slim sightlines and inline system with sash and outer frame the same depth
White, anthracite grey and anthracite grey-on-white, as standard colours. Any RAL colour or combination on special orders
Colour matched handles and magnetic door holders
Low threshold options
30mm polyamide thermal break for increased thermal values
Internally glazed accommodating 28mm and 35mm (triple glazed) IGUs
U-values ranging from 1.4Wm2/K to 1.7Wm2/K
Part Q Compliant, Including PAS 24 and BS6375 Part 1 Weather Testing
Low threshold*
Issued: DES 2016 DO NOT SCALE
DBE-001Standard SillOuter Frame
Denotes Primary Visible SurfaceDenotes Secondary Visible Surface
DBE-002Head/JambOuter Frame
5555
73
36.536.5
3535
16.16
81.1
81.1
16.16
73
36.536.5
12
DBPR-001St/St RunningTrack
5
12
Issued: DES 2016 DO NOT SCALE
Denotes Primary Visible SurfaceDenotes Secondary Visible Surface
Thermal Infil(Pour and Cut)
36.95 45.15
20
82.1
DBE-011150 mm DrainageSub Sill
DBE-004Low Threshold Sill
150
25
32.3
39.3 35.5 75.2
13
Issu
ed: D
ES
201
6D
O N
OT
SC
ALE
Den
otes
Prim
ary
Vis
ible
Sur
face
Den
otes
Sec
onda
ry V
isib
le S
urfa
ce
Ther
mal
Infil
(Pou
r and
Cut
)
36.9
545
.15
20
82.1
DB
E-0
1115
0 m
m D
rain
age
Sub
Sill
DB
E-0
04Lo
w T
hres
hold
Sill
150
25
32.3
39.3
35.5
75.2
13
9
ww
w.s
lider
s-uk
.com
*Low threshold anodised silver only.
Images shown are for illustration purposes only.
Contact a member of the sales team on 01772 698222 or email sales@sliders-uk.com to find out more.
www.sliders-uk.com
High precision manufacture
We employ the strictest quality management system, going far beyond our BSI approved controls.
This includes the manufacture of doors on rigs, which means that all running and door operation is fully tested before doors leave the factory floor.
Fully wrapped and delivered by our dedicated fleet, it means that we’re able to offer you guaranteed quality and service.
Recommended