View
222
Download
6
Category
Preview:
Citation preview
32
BEHN + BATES
THE BEHN+BATES TECHNOLOGIES FOR MILLING PRODUCTS
Product processing and packaging are main parts of your
value added chain. Being supplied specifically for your
product and your conditions, they provide considerable
and lasting advantages:
n Maximization of profit e. g. due to clean and weight-
accurate product processing
n Maximization of benefit due to improved product
protection and protection against humidity
n Reduced cost due to clean packing environment and
reduced clean work
n High advertising impact due to optimally filled bags and
containers that can be efficiently processed by your
customers
n Reduced delivery costs due to optimum use of shipping
spaces
Tread news paths – with us – because you profit from our
experience.
You are producers of milling products, such as:
n Wheat or rye flour
n Baking mixtures or baking additives
n Bran, oat flakes or malt extracts
n Baker’s yeast or raising agents
n Etc.
If so, we are your partner, as we are specialized with
your products. We supply:
n Packaging and palletizing equipment for valve bags,
pre-fabricated open-mouth bags, FFS bags and big bags
n Filling and palletizing equipment for jerrycans and IBCs
n Storage and conveying equipment, silos, ship loaders
and unloaders, conveying systems, bulk loading systems
Modern standards such as GMP and HACCP are not
foreign words to us but terms used in our daily work.
Together with our customers we regularly develop
technologically convincing solutions, taking into account
the most recent regulations and trends of the food
packaging industry as well as the experience our experts
have gained in their daily business.
The company BEHN+BATES
Founded in Krefeld, Germany in 1933, BEHN+BATES rapidly became known for high quality bag filling machines. After being taken over in 1994 by HAVER & BOECKER, Oelde, Germany, one of the world-wide leading packing machine manufacturers, we have specialized in the food industry from the end of the 90s.Since then, leading groups of food companies have trusted in our technology, as have small factories.
Presence around the globe
Our representatives and service network, located in morethan 65 countries, are readily available to support your installation. They consist of HAVER & BOECKER subsidiaries as well as independent agencies, all of whichare highly trained. They know the specialties of food processing and packaging and are able to advise and fullysupport you from your initial project concept up to theready-to-use installation and subsequent regular maintenance.
MM EE MM BB EE RR
54
BEHN + BATES
HIGHLY PRODUCTIVE: OUR VALVE BAG FILLING TECHNOLOGY
The BEHN+BATES impeller packer
has proven to be the most reliable solution for very fine
flour and plain flour types. It fills your products at a high
filling pressure thus ensuring low-air and compact product
packaging. The bulk density and the flowability of your
product are paramount for the selection of the correct
impeller filling system:
n Vertical impeller for fine powders
n Horizontal impeller for heavily flowing and light products
The diameter of the impeller wheel is selected according to
your product properties.
Machine output:
Up to 300 bags per hour per spout
Your advantages:
n Improved product shelf life through the reliable filling of
tight bags
n No product loss due to the weight-accurate filling by the
product-selected filling impeller
n High packing outputs through bag filling without
overpressure and minimum de-aeration times
n Optimum pallet shape through the especially compact,
low-air bag filling
A lot of companies producing milling products prefer the
valve bag. It represents easy handling, high outputs,
good weighing accuracies and compact bag shapes with
high advertising impact. We offer:
The BEHN + BATES pneumatic packer
using the air filling principle is suitable for filling a wide
range of grain sizes. The continuous product flow from the
filling chamber is ensured by the fluidization air quantities
being adjustable to your product. For compact bag shapes
the special BEHN+BATES filling and de-aeration tube
removes the air from the bag already during filling.
Machine output:
Up to 250 bags per hour per spout
Your advantages:
n Cost reduction from weight-accurate product dosing
n High filling outputs with low inner bag pressure and
minimized dust occurrence from the BEHN+BATES filling
and de-aeration tube with integrated residual product
recycling
n Product-optimized filling process through the fully
aerated filling chamber for difficult-to-fluidize products
n Reduced cleaning through minimum spillage
n Reduced energy consumption through product-specific
adjustable minimum fluidizing air quantities and thus
reduced residual air removal
The linchpin: Your product –Our solution: The right filling technology
The exact analysis of the product and its characteristics aswell as the used materials is one of the basic preconditionsfor all processes in the bulk goods handling industry. Ourpractice-orientated tests lead to economic packaging solutions and facilitate the collection of process-relevantproduct data.
You have special demands on your filling machine? Our flexible modular machine designprovides you with the right solution:
n Motor-driven bag length adjustment
n Metal detector – integrated or external
n Printer and labeler for bag marking
Check weigher for checking the weights and communicating them to the central control system
Sampling device
Complete stainless steel design
76
BEHN + BATES
CUSTOMIZED: OUR AUTOMATIC VALVE BAG FILLING
The BEHN+BATES ultrasound sealing station
closes all valves with PE coating in a clean and tight way
thus preventing even the smallest product particles
escaping from the filled bag.
Machine output:
Depending on the filling machine output
Your advantages:
n Optimum product protection through tightly closed
bags
n Maximum cleanliness through bag sealing directly at
the filling spout
n Space and cost savings from the integration of the
sealing station within the filling machine frame
n Dust explosion protection with certification according
to ATEX for application in the dust-explosion zones
21 or 22 or according to UL or CSA
For fully automatic valve bag filling we can supply you
with your customized solution allowing you to either
automatically apply or seal the bag.
The BEHN + BATES FRONTLINE bag applicator
applies all common bag types and sizes in a reliable, fast
and secure way. It ensures minimum product losses and
high application rates.
Machine output:
Up to 650 bags per hour
Your advantages:
n Cost reduction through the linear bag application and
controlled valve opening
n Ideal space use from the project-specific selection and
positioning of the empty bag magazine
n Reduced maintenance through the free access of the
filling machines from the front
n Flexibility from the easy change-over to different bag
sizes and types
n Optimum production planning through the possible
future extension of the existing filling machine
Optimum shaping of the pre-opened
valve by opening cone
Transfer of the pre-opened bag to the
filling spout
Empty bag singling by sucker bar
Automatic valve bag handling: Applying – Filling – Sealing
Clean bag filling by the BEHN+BATES filling
tube with inflatable sleeve
Hermetically tight bag sealing by ultrasound
directly at the filling spout
98
BEHN + BATES
PLUG ‘N PACK: OUR INTEGRA FD
Clean, silent and ready for operation within the shortest
possible time – Our ”Plug ‘n Pack” design INTEGRA FD
sets standards. It integrates the application, filling and
sealing stations in a compact dust-tight cabinet that is
completely assembled and cabled prior to delivery.
The INTEGRA FD can be supplied with 1 to 4 filling spouts
– or alternatively in expandable version for your flexible
production planning.
Machine output:
Up to 650 bags per hour
Your advantages:
n Improved cleanliness from the dust-tight, noise-
absorbing cabinet with large-area access doors
n Low commissioning costs due to the delivery of a
completely assembled and tested filling machine
n Low space requirements from the compact design
n Comfortable operation with the integrated touch panel
and the use of polycarbonate windows for the visual
control of the packing process
Optimum product protection
Checking the product for metal particles and the automatic discharge of metal-containing bags are part ofthe standards in modern food installations. We can offeryou various solutions for the integration of a metal detector and testing devices to support you in your quality control and the observation of food regulations.
Sensitivity depending on the product:
1.2 mm for iron particles1.5 mm for stainless steel particles
The details make the difference:Label printer for labeling the empty bags
The traceability of products is of utmost importance in thefood industry. Carefully marked bags include informationon all important production data.We offer solutions for the printing of full bags – as well asfor the labeling of empty bags providing you with thevery special advantage of having the labels reliably applied and always in the same position on the clean bottom of the empty bags. A scanner guarantees thatonly accurately labeled bags are filled. In order to avoid the dust deposit areas, the label printercan, for example, be installed in such a wayas to be flush with the cabinet of the INTEGRA FD.
1110
BEHN + BATES
Your advantages:
Optimized cost and space requirements from one
central product feed and one central filled bag transport
system
Higher outputs in reduced spaces through the more
compact installation of the filling spouts
Clean product handling from the project-specific
selected filling system and bag sealing by ultrasound
directly at the filling spout
Minimum maintenance through continuous bag
discharge and the gentle operation of all following plant
components
Simple automation through the possible installation of
the automatic valve bag applicator, type RADIMAT
Gradual increase in production through expandable
machine design (from 3 or 4 spouts to 6 spouts, from
4 or 6 to 8 spouts, from 5 to 10 spouts) and easy retrofit
of individual spouts – without any changes to the prior
or subsequent plant components
High packing outputs in smallest spaces: We deliver our
ROTO-Packer and our ROTOSEAL systems for high-end
applications.
In comparison to conventional inline packers the filling
spouts of the ROTO-Packer are mounted on a rotating
machine frame. Therefore less space is required to reach
higher packing outputs with more filling spouts.
Besides the standard ROTO-Packer for self-closing valves
we can supply our ROTOSEAL system to hermetically seal
the filled valve bags directly at the filling spout with the
help of ultrasound energy.
Your product is the task – we have the solution:
The ROTO-Packer and the ROTOSEAL are equipped
according to your requirements with either the air or the
impeller filling system.
Machine output:
From 600 up to 2,400 bags per hour
with filled weights of 10 to 50 kg
VALVE BAG FILLING TO PERFECTION: OUR ROTOSEAL
Reliable empty bag bundle feed into
the RADIMAT bag applicator
Filling spout with inflatable sleeve that
reliably seals the bag during filling
Faulty bag discharge with automatic
correction of the responsible filling
spout
n Empty bag magazine with
a project-specific length
n RADIMAT automatic valve
bag applicator
n ROTO-Packer or
ROTOSEAL
Steady full bag discharge
and transport to the
palletizing
The classic ROTO Packer or ROTOSEAL installation: The details make the difference
1312
BEHN + BATES
Vollsack-Bedruckung Bandkontrollwaage
Your advantages:
High cleanliness due to product-specific dosing and
filling within a dust-tight machine cabinet
Exact weights due to separate coarse and fine flow
filling with the gross principle for powders or due to the
application of a net weigher for granulated products
Attractive bag shapes due to efficient product
densification by special bag vibrators and vacuum
probes
Good product protection due to project-specifically
selected bag closure, e. g. folding, welding or hot-melt
activation
High advertising impact due to application of appealing
bag materials with high-quality imprints
Optimum product protection and improved storage,
high advertising impact or simple opening and re-closing
of the used bag – all these are convincing features of the
open-mouth bag.
However, the filling of milling products requires very special
sensitivity. Only the well balanced combination of low-air
filling, a dust-tight filling spout and efficient de-aeration
provides optimum filling results – and this is our main
strength.
For the packing of milling products into your pre-fabricated
open-mouth bags we offer the BEHN+BATES TOPLINE
system. The complete bag processing is carried out in a
compact, dust-tight machine cabinet – starting with the
bag feed and filling up to the densification and sealing.
In brief: The function
The separated empty bag is taken out of the magazine,
exactly aligned and opened by suction cups. Bag grippers
take the pre-opened bag to apply it securely to our special
dust-tight powder filling spout. In order to compact your
products during or after filling we equip the TOPLINE with
vibrators – in specially encapsulated food-grade design –
and, if required, with an additional vacuum probe.
Machine output:
up to 200 bags per hour with 25-kg-bags and gross weighing
INNOVATIVE: OUR OPEN-MOUTH BAG FILLING SYSTEM TOPLI NE
Secure bag singling and bag handling by
suction cups
Reliable bag opening by suction cups Transfer and application of empty bag to
the filling spout by grippers
For low-dust product filling the bag is tightly
sealed at the product-specific designed filling
spout
The linchpin: Your project – Our solution: The fitting components
The details make the difference
Filled bag before and after compaction – from difficult-to-palletize to
compact, box-shaped and easy-to-palletize bags
Corner welding for optimum bag shapes and
easy complete bag emptying
Head seam welding with minimum overlapPre-shaping of the pre-opened bag before
bag application
1514
BEHN + BATES
Your advantages
High cleanliness due to dust-free filling, sealed filling
spouts and de-dusting in the filling machine
Excellent product protection from moisture and outside
influences in tightly sealed PE bags
Attractive bag shapes due to simultaneous bag filling
and de-aerating as well as through the integrated corner
weld for the proven box shape of the filled bag and easy
palletizing
High tear resistance of modern films to minimize bag
breakage along the entire logistical supply chain for
higher cleanliness and reduced maintenance
Perfect advertising impact due to appealing high-quality
imprints with gloss finish – for increased acceptance
among your customers and thus higher sales
Environmentally-friendly packaging due to tailor-made
bags and minimized packing material consumption
Each producer is keen on keeping packing costs low –
combined with maximum cleanliness. The FFS bag meets
this requirement to the largest possible extent. It is
formed out of a gusseted tubular film, filled and sealed
thus enabling the bag size to be optimally adjusted to
the product. As a result film consumption is reduced.
The ADAMS technology is the BEHN+BATES FFS system
for filling powdery milling products.
In brief: The function of the ADAMS
The film length needed for your product and your filling
weight is automatically cut from the film reel. The bottom
seam is welded with a minimum overlap. For an optimum
bag shape and for easy complete bag emptying it can be
fitted with corner welds.
Grippers take the pre-shaped, opened bag and apply it to
the dust-tight BEHN + BATES powder filling spout. Your
product is filled either by air or impeller units according to
the gross filling principle – being compacted at the same
time. Thanks to the gross filling system we reach brilliant
weight accuracies.
The upright standing bags are closed in a tight and
hygienic way directly after filling. Then they are flattened
and palletized. The result: Perfectly filled, compact bags
requiring just a minimum of film.
TREND-SETTING: OUR ADAMS TECHNOLOGY
BEHN + BATES
INTEGRA FD 3 für die Abfüllung von Stärke Innenansicht des INTEGRA FD 3Einhängen der Großsack-Schlaufen in die
schwenkbaren Haken
Befestigung am Füllstutzen mit Blähmanschette für die
Abdichtung des Großsackes während der Befüllung
Manuelles Verschließen des befüllten Groß-
sackes – optional durch unsere Tulpenbildung
Abtransport des befüllten Großsackes zum
Vollsack-Lager
16 | 17
Your project determines the filling mode:
n Below-surface for products causing foam or explosive
gas during filling
n Above-surface for uncritical products filled into top
open containers
n Below-bunghole for uncritical products filled into
bunghole containers
Your advantages:
High cleanliness through level controlled ascent, drip
cup, drain funnel and cleaning station – or on request, a
closed protective cabin with lock gates
High filling accuracy through coarse and fine flow filling,
product-specific hose design, available heated filling
lance or with nitrogen purging before or after filling
No product cross-contamination through rapid change
out of filling lances
Sealed containers through container-specific screw cap
or push-in plug and leakage test
Optimum operation through easy product change and
cleaning processes, base height adjustment as well as
tool-less operation in daily production processes
Short and simple commissioning through the delivery of
pre-assembled and tested filling stations and clear
operator guidance
Special machine variants executed according to ATEX
regulations or in stainless steel design
Regardless whether you process liquid baking additives
or malt extracts – your product can be filled in an
accurate clean way into jerrycans or IBCs. All our liquid
fillers are carried out in close cooperation with our sister
company Feige FILLING – a leading name in the filling of
liquid and pasty products as well as a guarantor for the
gravimetric filling with calibrated accuracy for more than
40 years.
We can provide semi-automatic filling machines as well as
fully automatic solutions with complete periphery. With
semi-automatic fillers the operator opens the empty
container, positions and aligns it underneath the filling
lance before starting the automatic filling process. After
filling, he closes the container and opens the next empty
one. In fully automatic processes, the empty and closed
containers are transported to the filler. There they are
exactly positioned underneath the tools, automatically
opened, filled and re-closed. Other functions such as
labeling, nitrogen purging, overpressure bunging or leak
testing can be integrated into the automatic process.
NO DRIP IS LOST: OUR LIQUID FILLING SOLUTIONS
Fully automatic jerrycan filler Filling of pallets with drums and IBCs
Everything starts with the selection of your container
We are able to process anything – from 0.5 kg tins orpails, jerrycans, bags, steel and plastic drums to IBCs. Weturn the wide variety of our customers' project scope intothe challenge of finding and implementing individual customized solutions for semi-automatic or fully automatic applications up to complete turnkey plants –on request with labeling, carton packaging, palletizing,storing, dispatch and logistics.
18 | 19
BEHN + BATES
Palletizer G1000The filled bags are handled one-by-one by a gripper tool and
deposited on a double false pallet. The completed layer is
squared and placed onto the pallet.
Palletizers - Series 1000 to 1800The filled bags are oriented either by a turning flap or by a
turning cross. The bag layers are formed row by row,
squared and pressed before being placed onto the pallet.
Your advantages:
Project-specific machine layout due to standardized
modular machine design
Project-specific bag handling by turning flap, turning
cross or gripper tool and exact bag positioning on the
pallet or on a double false pallet
Attractive and straight bag piles due to the project-
specific use of pallet presses and centering devices
Reliable handling of different bag types and sizes – as
well as of difficult-to-handle bags that are not full or
contain extremely fluid products
User friendly machine operation thanks to the integrated
touch screen and the software with automatic pallet
calculation and positioning depending on the bag/pallet
format and the palletizing pattern
Your bags are packed. They are tight, clean and offer
optimum protection of your products. But: They have
not yet arrived at your end-users' sites. Before they have
to be stacked accurately and the pallets have to be
packed carefully in order to:
n Protect the filled bags against damage.
n Optimally use the available loading space and avoid loss
of space due to irregular bag piles.
n Avoid loss of time during handling and transport
because of badly stacked pallets.
n Prevent the pallets from tumbling due to irregular bag piles.
n Maximize your productivity and your advertising impact
Modern palletizing technology is offered in cooperation
with our sister company NEWTEC BAG PALLETIZING
having more than 40 years of experience in the field of
palletizing. They know how to handle the challenge of
producing clean and compact filled bag stacks that are in
accurate harmony with the upstream packing process.
Especially for milling products we can offer the
following solutions out of our food series AGROPAL:
Palletizer G300 and G600 The filled bags are taken by the motorized gripping tool and
deposited on the pallet in the pre-set pattern.
THE RIGHT END-OF-LINE SOLUTION FOR YOUR NEEDS: OUR PALLETIZERS
Automatic empty pallet singling and automatic cover sheet
dispenser
Automatic shuttle system for the transport of full pallets to
the stretching system or the full pallet storage
Turning cross for optimum bag
preparation and positioning
Transport of prepared bags to the
palletizer
Depositing of prepared bags on the
double false pallet
The details make the difference
20 | 21
BEHN + BATES
Your convincing and attractively packaged bags are
the result of detailed planning, a carefully selected
packaging technology and a customized overall
concept incorporating the prior and subsequent plant
components, e. g.
n Silo installations
n Filter plants
n Material transport
n Ship loaders and unloaders
n Bulk loading systems
We develop comprehensive solutions for hygienic, reliable
and economic processes in the food industry – all this in
close co-operation with you and our sister company
IBAU HAMBURG. Due to careful engineering and big
ingenuity it succeeds again and again in designing and
realizing convincing turnkey solutions for different land and
marine applications.
IBAU HAMBURG is an engineering company with one
principle: To always find appropriate high quality customer
oriented solutions. We continually renew and improve all
processes and products. With our excellence program we
integrate every new idea and we make it immediately fit
for production: Always in close contact with you.
All original constructions. All made to measure under
consideration of modern food standards.
AND WHAT ELSE COUNTS: PLANT DESIGN & ENGINEERING
/
/
/
F1F1 F2F2 F3F3 F4F4 F5F5 F6F6
11 22 33
44 55 66
77 88 99
00 +/-+/-
ESCESC??
F1F1 F2F2 F3F3 F4F4 F5F5 F6F6
11 22 33
44 55 66
77 88 99
00 +/-+/-
ESCESC??
F1F1 F2F2 F3F3 F4F4 F5F5 F6F6
11 22 33
44 55 66
77 88 99
00 +/-+/-
ESCESC??
BEHN + BATES
/
/
/
/
/
/
Integral planning concept
We plan your entire packaging plant – from the productstorage up to the fully packaged filled bag pallet withtransport protection.
22 | 23
BEHN + BATES
MaintenanceRegularly maintained machines reliably reach desired
performances over years. Downtimes are avoided. We offer
regular maintenance services including all necessary
preventive machine adjustments and repairs. Our experts
also check the spare parts that you need to have in stock
for fast repairs and small downtimes.
Retrofit/modernization: “Turn old into new”Your old machine functions perfectly. But it does not fulfill
today's standards. Small measures frequently help
overcome such a discrepancy. Please contact us. We will be
pleased to advise you with regard to modernization,
conversion, re-commissioning or even extension and
automation projects.
Service around your filling plants: This is another
essential component of our company philosophy.
We offer you a wide range of different services:
Assembly and commissioningOptimum functioning of your new packaging plant is
attained if assembly and commissioning are carried out by
our food-experienced technicians. They optimally adjust
your machine to your products and containers.
Operator trainingWell trained and thus motivated operators largely
contribute to the perfect operation and maintenance of
your packaging plant. We offer training of your operators
to best familiarize them with our technologies.
CalibrationYour customers want to get weight-accurately packed
containers – you want to avoid costs caused by product
loss. Therefore, regular calibration of the weighing
electronics integrated in your packaging plant is essential.
We offer you our assistance before and during calibration.
Spare partsYou benefit from using original parts: Optimally fitting into
the machines, they guarantee highest outputs and a long
lifetime. Thanks to our extensive stock of spare parts, we
are able to supply original spare parts fast for many years.
CUSTOMIZED: OUR SERVICE
ASSEMBLY &
COMMISSIONING
TRAINING OF
OPERATING
STAFFCALIBRATION
CONVERSION &
MODERNIZATION
REMOTE
SERVICEMAINTENANCESPARE PARTS
CUSTOMER SERVICE
Our remote service
In case of breakdowns it is important to get the machinerunning fast again. If requested, we are able to log intothe control of your machine in order to check the program, to trace the source of defect and to carry outresets or desired changes of parameters.
For your own remote control we can offer you our modern service pad.
B+B 031
6 GB 1 Fe
The mac
hine
s an
d plants sh
own in this leaflet as w
ell a
s the stated
tec
hnical param
eters are ex
amples of cu
stomer-spec
ific tech
nica
l solutions
. The
refore the
y are su
bject to m
odifica
tions
. Th
e des
igna
tion ® in
dicates
a reg
istered tradem
ark of BEHN+BATE
S Masch
inen
fabrik GmbH &
Co. K
Gin G
erman
y. Sev
eral in
dicated
des
igna
tions
are reg
istered tradem
arks also in
other coun
tries worldwide.
BEHN+BATES Maschinenfabrik GmbH & Co. KG
Robert-Bosch-Straße 6 . 48153 MÜNSTER . GERMANY
Telephone: +49 251 9796-0 . Telefax: +49 251 9796-260
E-mail: sales@behnbates.com
Internet: www.behnbates.com
SOUTH AFRICA
HAVER Southern Africa
Unit 3 Cranberry Industrial Park
Cranberry Street
Honeydew, Ext 22
2170 Johannesburg
Telephone: + 27 11 794 3841
Telefax: +27 86 547 0489
info@haversouthernafrica.co.za
www.haversouthernafrica.co.za
SPAIN
HAVER & BOECKER IBERICA
Plaza Tetuan 40 2a Planta, oficina 37
08010 Barcelona
Telephone: +34 932476190
Telefax: +34 932476191
hbi@haverboecker.com
www.haver.es
UNITED ARAB EMIRATES
HAVER MIDDLE EAST FZE
Amenity Tower 2 – Office 8F-03
Al Jazeera Al Hamra, Ras Al Khaimah
Telephone: +971 72434711
Telefax: +971 72434712
office@havermiddleeast.com
www.havermiddleeast.com
USA AND CENTRAL AMERICA
HAVER & BOECKER USA
460 Gees Mill Business Court
Conyers, GA 30013
Telephone: +1 7703887886
Telefax: +1 7707601181
info@haverusa.com
www.behnbatesusa.com
… AND REPRESENTATIVES
WORLD-WIDE
LOCAL CONTACTS
BRAZIL
HAVER & BOECKER Latinoamericana
Industria e Comercio de Maquinas Ltda.
Rod. Campinas a Monte Mor km 20
13190 Monte Mor S.P.
Telephone: +55 19 38 79 91 01
Telefax: +55 19 38 79 14 10
haverhbl@haverbrasil.com.br
www.haverbrasil.com.br
CANADA
HAVER & BOECKER CANADA
225 Ontario St.
St. Catharines, ON L2R 7B6
Telephone: +1 905 688 2644
Telefax: +1 905 688 4733
sales@wstyler.ca
www.wstyler.ca
CHILE
HAVER & BOECKER Andina
Marchant Pereira 150,
of. 401-402, Providencia
CP 7500523 Santiago
Telephone: +56 2 9527 – 900/901/902
haverandina@haverandina.cl
www.haverandina.cl
CHINA
HAVER TECHNOLOGIES (Tianjin) Ltd.
North Area of Wuqing Development
Zone III, East Quanhua Road,
New Tech Park, Tianjin,
Post Code: 301700
Telephone: +86 22 5898 3800
Telefax: +86 22 5898 3801
htt@havertechnologies.com
www.havertechnologies.com
FRANCE
HAVER FRANCE S.A.R.L.
ZA 7, rue des Bauches
78260 Achères
Telephone: +33 1 39118080
Telefax: +33 1 39118089
contact@haverfrance.fr
www.haverfrance.fr
GREAT BRITAIN
HAVER CONTINENTAL LIMITED
24B Invincible Road,
Farnborough GU14 7QU,
Hampshire, England
Telephone: +44 1252 512 122
Telefax: +44 1252 549 291
info@havercontinental.com
www.havercontinental.com
POLAND
HAVER TRADING SP. Z.O.O.
ul. Kolejowa 3
Bielany Wroclawskie
55-040 Kobierzyce
Telephone: +48 717960204
Telefax: +48 717960205
htr@haverboecker.com
www.havertrading.pl
RUSSIA
HAVER Russia
Gostinichny proezd, 8/1, Office 51
127106 Moscow
Telephone: +7 49 57 83 34 48
Telefax: +7 49 57 83 34 48
haverboecker@haverrussia.ru
Internet: www.haverrussia.ru
Recommended