TEMPLATEimages.marthastewart.com/images/content/web/pdfs/... · template. Cut out and affix to...

T E M P L AT E

2005 MARTHA STEWART LIVING OMNIMEDIAC

www.marthastewart.com

C AT L AW N O R N A M E N T

Because our cat silhouette is life-size (that's what makes it so scary), the template is printed in sections and taped together to form the complete image.

Each piece of the template has been labeled with a letter-number combination that refers to its placement in the master template. Once each piece has been printed out, place the individual sheets in order following the master templates (below).

Once pieces are in the correct order, tape them together to create one large template. Cut out and affix to plywood with repositionable spray adhesive.

1) Print out the tiled sections and tape together, using cropmarks as a guide. 2) Cut out and affix to plywood with repositionable spray adhesive. 3) With a jigsaw, cut out design; peel off template and paint plywood black. Let dry for 30 minutes. 4) Hammer conduits into ground, sinking 12 inches for witch and 8 inches for cats. 5) Attach figures to conduits using 3 conduit sraps and 6 screws for the witch and 2 conduit straps and 4 screws for each cat. 6) Fasten a broom to the witch’s raised arm with remaining conduit strap and screws. Attach a cup hook to her other hand, and hang a lantern on it.

TOOLS & MATERIALS

4-by-8-foot piece of ƒ-inch plywood

repositionable spray adhesive

jigsaw

black latex paint and paint brush

hammer and screwdriver

6-foot piece of heavy-wall conduit

4 two-hole conduit straps and 8 wood screws

broom, cup hook, and lantern

A1 A2 A3 A4 A5

B1 B2 B3 B4 B5

C1 C2 C3 C4 C5

D1 D2 D3 D4 D5

A1 E2 E3 E4 E5

A1 F2 F3 F4 F5

G1 G2 G3 G4 G5

H1 H2 H3 H4 H5

I1 I2 I3 I4 I5

A3

A4

B1

B2

B3

B4

C2

C3

C4

D1

D2

D3

E1

E2

E3

F1

F2

F3

G1

G2

H1

H2

H3

I1

I2

I3

I4