TECHNICAL DATA SHEET - Rubber Sheet Roll · notice of cancellation inch-pound mil-r-6855e notice 1...

Preview:

Citation preview

REV 1—1/10 PMS

MIL R 6855 E MILITARY SPECIFICATION (1992)

SUPERCEDED BY SAE-AMS-R-6855 (1998)

ELASTOMER, SYNTHETIC, SHEETS,

SOLID, MATERIAL.

MIL R 6855 E - Technical Specification Data

MIL R 6855 E SYNTHETIC RUBBER SHEET will resist most oils,

not effected by sunlight or harsh environmental extremes. MIL R

6855 E maintains superior flexibility in hot or cold conditions, and

also has the resiliency to maintain temperature and environmental

cycles. The synthetic material is configured based on Type and

Class. This specification data covers the governing MIL SPEC call

out, not individual classes or types. Certifications are available for

classes and type variations.

Fire Rated: Not Fire Rated | Chemical Resistance: Moderate

UV Rated: Moderate | Composition: Synthetic Rubber

PO BOX 171Shippensburg, PA 17257Phone: 866.834.8606Fax: 888.440.5797E-mail: info@rubbersheetroll.com

www.facebook.com/Rubber-Sheet-Roll

www.twitter.com/rubbersheetroll

TECHNICAL DATA SHEET

COLOR: BLACKSURFACE: SMOOTHTEMPERATURE RANGE: SEE ATTACHED DOCTENSILE: SEE ATTACHED DOCDUROMETER: 60A NOMINALELONGATION: SEE ATTACHED DOC

RUBBER SHEET ROLL

MIL-R-6855ENOTICE 215 June 2001SUPERSEDINGNOTICE 118 December 1998

MILITARY SPECIFICATION

RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES,GENERAL SPECIFICATION FOR

MIL-R-6855E, dated 31 July 1992, is hereby reinstated and may be used for acquisition.

Custodians: Preparing activity: Army - MR Navy - AS Navy - AS Air Force - 11 DLA - IS

(Project 9320-0040)Review activities: Army - AR, AT, AV, CE, CR, MI Navy - OS, SH, YD Air Force - 82, 99 DLA – CC, GS

AMSC N/A FSC 9320

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

NOTICE OFREINSTATEMENT INCH POUND

NOTICE OF CANCELLATION

INCH-POUND

MIL-R-6855ENOTICE 118 December 1998

MILITARY SPECIFICATION

ELASTOMER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES,GENERAL SPECIFICATION FOR

MIL-R-6855E, dated 31 July 1992, is hereby canceled. Future acquisition for this materialshould refer to SAE-AMS-R-6855, “Elastomer, Synthetic, Sheets, Strips, Molded or ExtrudedShapes, General Specification for”.

(Application for copies of SAE - Aerospace Material Specifications should be addressed toSAE, 400 Commonwealth Drive, Warrendale, PA 15096.)

Preparing activity: Navy - AS

(Project 9320-0022)

AMSC N/A FSC 9320

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Recommended