View
41
Download
0
Category
Preview:
DESCRIPTION
tech tips agosto 1999
Citation preview
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 1/86
August 1999LEVN4715
Page 1
Tech Tips
August 11, 199910:00AM CDT
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 2/86
August 1999LEVN4715
Page 2
Index
Page PageIron Electronic Engine Software
3100 Service Letter – PI1419 4 3126/3126B Service Letter – PS4701 39C-10/C-12 New Oil Filter Base 5 3126B Mid Year Update 8YL Serial Number 40Improved High Efficiency Fuel Filter 7 3126B Mid Year Update 7AS Serial Number 50
3406E Aluminum Piston Kit 9 3126B Service ECMs 533406E Exhaust Manifold Sleeve (138-6756) 10 Coolant Level Sensor 543406E Valve & Injector Rocker Arm Wear Limit 113406E Valve Cover Seal – Design Change 12 Electronic Service Tools
Quick Tip #1 Caterpillar Electronic Technician Release Information 56Software Help Desk Changes 57
TOPP 16 Remanufactured Engine Serial Numbers 59Service Technician Workbench 60
Quick Tip #2 Pro-Link 9000 Cartridge 65
Engine Service Training Quick Tip #3
Topics Covered 21 Binder Labels 67Broadcast Information 68
Electronic Troubleshooting Keepin’ In Touch 69
ADEM 2000 Test ECM 26 Reference information 71Ambient Air Temp Sensor Kits 27CAT ID 2.0 Software Problems 28
New 3126B Troubleshooting Guide 29ET 2.4 Special Tests for 3126B (8YL) 303126B (7AS) IAPCV – Special Test 32Cam & Crank Sensor Faults 34Jul 99 Parts Service Software 37
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 3/86
August 1999LEVN4715
Page 3
Iron
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 4/86
August 1999LEVN4715Page 4
3100 Service Letter
4PI1419 - 3100 Mechanical Rack Linkagen Affected Serial numbers
n 9GK45180 - 68297
n 9YN03132 - 04763
n 7HJ01000 - 02900
n 2FR00394 - 04297n 9LN05573 - 08669
n 7HS00316 - 01794
n 7JL00439 - 00906
n 7AG02806 - 05461
n 5RM01263 - 03669
n 3RJ01653 - 02990
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 5/86
August 1999LEVN4715Page 5
C-10 / C-12 New Oil Filter Base
4 New 166-1329 Oil Filter Base Gp Replaces former 122-0725 Base Gp
4 Removed 9Y-3902 Oil Cooler Bypass Temperature Valve and Replaced with 7C-2891Cover, 9M-0853 plunger and 7C-3953 Spring Assembly
OLD NEW
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 6/86
August 1999LEVN4715Page 6
C-10 / C-12 New Oil Filter Base
4New Parts identical to those used for Oil Filter Bypass valve
4Bolt Pattern has been changed for new valve parts, will notaccept former 9Y-3902 Oil Cooler Bypass Temperature Valve
4New Oil Filter Base services the Old
4 In Effect July 6, 1999 with Following Serial Numbers:n ‘98 C-10 8YS07368
n ‘99 C-10 3CS05801
n ‘99 C-12 2KS17296
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 7/86
August 1999LEVN4715Page 7
4Old material used for “Stay Clean Valve” may fatigue andcause valve to dislodge
4Dislodged valve could block fuel flow to engine
4Old Valve molded in BLACK
4New Valve made of moredurable material andis molded in WHITE
4 Introduced in July 1999
4Pre-Filling of Fuel Filtersis NOT recommendedby Caterpillar
Improved High Efficiency Fuel Filters
Stay Clean Valve
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 8/86
August 1999LEVN4715Page 8
Improved High Efficiency Fuel Filters
New HighEfficiency Filters
Former StandardFilter Part No.
StandardBack-UpFilter Part No.
1R-0749 1R-0712 1R-1712
1R-0755 1R-0715 NONE
1R-0756 1R-0718 NONE
1R-0750 1P-2299
(1R-0740)
1R-1740
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 9/86
August 1999LEVN4715Page 9
3406E Aluminum Piston Kit
4Optional Repair for 5EK 1-80,000 Low Horsepower Engines410 & less.
n 177-7493 Piston Kit (Repairs one cylinder)
n 1 - 108-2716 - Piston
n 1 - 134-3761 - Ring-Top
n 1 - 2P2817 - Ring-Intermediaten 1 - 7N7078 - Ring-oil
n 1 - 160-9874 - Liner Seal Kit
n 2 - 7E1177 - Retainer-Piston Pin
n
The 108-2716 Piston is Only Available In Piston Kitn Reuse current rod assembly and pin. Cylinder liner may be reused, refurbished or
replaced as required for each individual cylinder.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 10/86
August 1999LEVN4715Page 10
3406E Exhaust Manifold Sleeve
138-6756
4ShimGasket Retention For Initial Assembly Only
4Always Replace With 6 New Sleeve Assemblies If ManifoldIs Removed
4Testing Continues On Best Method To Repair With ManifoldThat Have Flanges Not Meeting “As New” Flatness.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 11/86
August 1999LEVN4715Page 11
3406E Valve & Injector Rocker ArmBearing Wear Limit
4New Specification 40.065 ±0.015 mm(1.5774 ±0.0006 Inch)n The “Use Again” dimension for wear in the lower portion of the bearing is a
vertical dimension that allows 0.3 mm(0.012 Inch) addition to the abovedimension.
The maximum“Use Again” dimension is then 40.38 mm(1.590 Inch).
This dimension still leaves approximately 1/3 of the bronze bearing material
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 12/86
August 1999LEVN4715Page 12
3406E Valve Cover Seal - DesignChange
Effective 4Q99 for 1998 & 1999 Model Year Valve Covers withSerial Numbers 1LW, 2WS, 5DS & 1MM
4“Press In Place” seal and fasteners & gromments replaceformer seal and fasteners & gromments
4New fasteners & gromment required to provide appropriateseal “crush” for sealing and noise reduction
4Retainer tabs in seal mounting holes retain fasteners duringservicing.
— Remember “Press In Place” seal and new fastener & gromments must beused in sets.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 13/86
August 1999LEVN4715Page 13
3406E Valve Cover Seal - DesignChange
8mm
Grommet Height
Old
10.75mm
New
34.836mm
1.37inch
New
35.21mm
1.39inch
Old
New For Press In Place Seal
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 14/86
August 1999LEVN4715Page 14
Quick Tip #1
4 - Adjusting Valves on 3406E Engines
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 15/86
August 1999LEVN4715Page 15
TOPP
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 16/86
August 1999LEVN4715Page 16
TOPP
4Only Cat labs are approved to analyze oil samples taken fromunits enrolled on TOPP
4PM 1 full service and PM 2 inspection forms requireinspection of the engine mounting system.
4Loose bolts in rear engine mounts have caused need to
replace flywheel housings. Flywheel housings not coveredby TOPP.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 17/86
August 1999LEVN4715Page 17
TOPP
4PM 2 service performed approximately every 200,000 miles.
4Besides the inspection, cooling systemflush / refill andthermostat replacement may also be required at this time.
4TOPP allows 2 hours for the inspection portion of the PM 2service.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 18/86
August 1999LEVN4715Page 18
TOPP
4Additional time allowed based on TRG if additional work isperformed
4Call TOPP as soon as unit arrives in shop.
4TOPP is staffed around the clock.
4Phone (800) 338-3428.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 19/86
August 1999LEVN4715
Page 19
Quick Tip #2
4 Installing CamSeal O-Ring On 3406E
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 20/86
August 1999LEVN4715
Page 20
Engine Service Training
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 21/86
August 1999LEVN4715
Page 21
Engine Service TrainingTopics Covered
4Heavy Duty Truck Technician Program
4Training Courses
4New Course Development
4Training Managers Meeting
4New 3116 Coining Tool
4Employee Addition
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 22/86
August 1999LEVN4715
Page 22
Engine Service Training
4Heavy Duty Truck Technician Programn Caterpillar Certified Technician
4Training Coursesn 3000 Series Fuel Systems
n
Small Engine Fuel Systemsn MediumEngine Fuel Systems
4New Course Developmentn Dyno Installation-Engine PAR
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 23/86
August 1999LEVN4715
Page 23
Engine Service Training
4Training Managers Meetingn September 1999
4Engine Training /CSTGn Working on 3116 Sleeve coining tool/video
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 24/86
August 1999LEVN4715
Page 24
Engine Service Training
4Todd Rothn Electronics Training
4Chuck Ellisn Fuel Systems Training
4Adrian Braziln Field Training
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 25/86
August 1999LEVN4715
Page 25
Electronic Troubleshooting
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 26/86
August 1999LEVN4715
Page 26
ADEM 2000 Test ECM
4New Test ECM now available for troubleshooting all Truck Engines with ADEM 2000 Electronic Controls
n 3126B, C-10, C-12, 3406E, C-15 and C-16
4To order a test ECM:n
Send a Fax (created on Dealership letter head) to the Caterpillar Tech Center -Attention Erin Blanch (309) 578-4572
n Specify the type of test ECM(s)
n Quantity of each
n Name and Address the ECM(s) should be shipped to
n Purchase Order Number
n Billing Address
n Dealer Code or TEPs Dealer Code
n Your Phone Number
TM
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 27/86
August 1999LEVN4715
Page 27
Ambient Air Temp Sensor Kits
4Ambient Air Temp Sensor Kits are Not Available for the 1999C-10, C-12 and 3406E engines at this time, but are planned fora late summer release
4
Part Number listed in the handouts for MAY Tech Tips wasused for another purpose and must NOT be used to order theAmbient Air Temp Sensor Kit
4An Electronic Communicator Newsletter will be published
to announce Availability and the correct part number forordering purposes
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 28/86
August 1999LEVN4715
Page 28
CAT ID 2.0 Software Problems
4CAT ID 2.0 Personality Module software must be replacedwith CAT ID 2.1 software in order to correct the followingproblems:
n Language selection defaults to English with each key switch cycle
n Incorrect Parameter data after Lifetime Total Miles exceeds 6553. The
following parameters values will be displayed incorrectly:n Driver and Fleet Total Miles
n Average and Instantaneous Fuel Economy
4To correct these problems, upgrade to Version 2.1 software.Do NOT replace the CAT ID Display unit
4Replace the CAT ID 2.0 software with CAT ID 2.1 SoftwarePart Number 168-7931
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 29/86
August 1999LEVN4715
Page 29
New 3126B Troubleshooting Guide
4RENR1367-01 Revision (7AS, 8YL, & 8SZ engines)
4New content:n 7 New Diagnostic Codes (Open, Short and Low Oil Pressure, Theft Deterrent
Active and Active While Cranking, Excessive Boost, and Truck ManufacturerNot Programmed)
n 4 New Test Procedures (Optional Engine Oil Pressure Sensor, Engine RunningOutput, Input Selections, and Powertrain Datalink)
n Several Updated Test Procedures (Wait to Start Lamp, Intake Air HeaterAltitude Compensation, Truck Manufacturer Parameter, Automated CylinderCutout Test, Timing Cal Connector Kit, etc.)
n Fleet Information Software (FIS) and Fleet Trip information
n Customer Programmable Parameter updates
n New Wiring and Component Location diagrams
n Additional Service Tool information
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 30/86
August 1999LEVN4715
Page 30
ET 2.4 Special Tests for 3126B (8YL)
4ET 2.4 Special Tests are not accessible for the 2000 Model Year 3126B (8YL) Truck Engines
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 31/86
August 1999LEVN4715
Page 31
ET 2.4 Special Tests for 3126B (8YL)
4Selecting the “Special Tests” located under the Diagnosticsmenu causes ET programto Lock Up
4ET 3.0 (October 99) will correct this problem
4An ET 2.4 software patch is also available on a limited basis if necessary:
n Call the Truck Engine Call Center at 1 (800) 447-4986 to obtain a copy of thissoftware patch if you must performone of the special test procedures prior tothe release of ET 3.0
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 32/86
August 1999LEVN4715
Page 32
3126B (7AS) IAPCV - Special Test
4One of the Special Tests (Injection Actuation Pressure Driver)does not function properly on 3126B (7AS) engines using thefollowing software:
n JUN98 through APR99 Personality Modules
4The PC-37: Injection Actuation Pressure Control Valve CircuitTest used in the Troubleshooting Guide for 3126B Engines(RENR1367) is affected
n The Results of Step 5 and Step 7 are misleading
n With JUN98 - APR99 Personality Modules, the Special Test cannot turn the
IAPCV Output OFF when the engine is not running
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 33/86
August 1999
LEVN4715Page 33
3126B (7AS) IAPCV - Special Test
4The Special Test is normally used to turn the IAPCV OutputDriver ON and OFF for troubleshooting
n To troubleshoot the IAPCV output of the ECM, a test lamp is connected todetermine if the output is functioning
n When the Special Test is turned ON (Active), the IAPCV Output Driver should
turn ON (test lamp ON)n When the Special Test is turned OFF, IAPCV Output Driver
should turn OFF (test lamp OFF)
n JUN98 - APR99 Personality Modules cannot turn the Output Driver OFF, so thetest lamp will not turn OFF when the test is disabled
4DO NOT replace the ECM if the IAPCV Special Test cannotturn the IAPCV Output (test lamp) OFF
4Update the Personality Module software and retest
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 34/86
August 1999
LEVN4715Page 34
Cam and Crank Sensor Faults
4Some 1999 C-10, C-12 & 3406E engines may log intermittentfault codes due to wiring connections
n 64-12 Loss of Engine CamSensor RPM Signal (34)
n 190-12 Loss of Engine Crank Sensor RPM Signal (34)
4Engine performance may be accompanied by a slight speedburp when the fault occurs
4The following truck engines are affected:n
C-10 (3CS00001 - 05369 )n C-12 (2KS00001 - 15070 )
n 3406E (1MM00390 - 00838, 2WS08900 - 20705 )
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 35/86
August 1999
LEVN4715Page 35
Cam and Crank Sensor Faults
4 If you have an engine exhibiting similar behavior, performthe PC-31: Engine Speed/Timing Sensor Circuit Test foundin the Troubleshooting Guide for C-10, C-12 & 3406Eengines (RENR2238)
4
If the Troubleshooting Procedure does not resolve theproblem, and the engine is within the suspect serialnumber range, check the Camand Crank sensor connectorSocket Terminals
4 If Stamped and Formed Socket Terminals are used in the
Camand Crank sensor wiring harness connector, theymust be replaced with Machined Socket Terminals
M achined
Socket Terminal Stamped and Formed
Socket Terminal
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 36/86
August 1999
LEVN4715Page 36
Cam and Crank Sensor Faults
4Socket Terminal Replacement Proceduren Turn the Ignition Key Switch to the OFF position.
n Remove the Sockets (one at a time) fromthe Deutsch DT connectors thatconnect to the Camand Crank Sensors.
n Remove each socket fromthe wire and replace it with a 8T-8730 Deutsch
Machined Socket Terminal.n Reinsert the socket into the connector while maintaining at least 1 inch twists
in the harness wiring.
n Check the harness clips to ensure they are properly secured. These clips areused to prevent excessive movement and dampen vibration during engineoperation.
n Ensure the ECM Personality Module is MAR99 or newer, or Flash Programif required to update to MAR99 or newer software.
n Use an Electronic Service Tool to clear the logged fault codes.
NOTE: Remove the wires and repair one at a time to ensure the polarity is not accidentally reversed.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 37/86
August 1999
LEVN4715Page 37
JUL99 Parts Service Software
4Personality Module software update for 1999 C-10 (3CS), C-12(2KS) and 3406E (1MM, & 2WS) engines
n Available mid-August for Production and Parts Service Update
4Addresses Eaton Autoshift Transmission Problemsn
Engine stall possible on engines with Eaton 18 Speed Autoshift Transmissionsor on engines with 10 Speed Autoshift Transmissions with TEL programmed to1900 rpmor higher
n Problemcan only occur when the Auto Retarder in Cruise parameter is enabled(Programmed above 0 MPH default)
n Prior to this software change the Auto Retarder in Cruise parameter must beprogrammed to 0 MPH to avoid this potential problem
4Addressed C-10 Throttle Deceleration Raten During Idle Conditions if the C-10 Throttle is depressed and then quickly
released the engine rpmslowly descends to low idle
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 38/86
August 1999
LEVN4715Page 38
Electronic Engine Software
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 39/86
August 1999
LEVN4715Page 39
3126 / 3126B Service Letter
4PS4701n Expired 06/30/99
n Date in FIND systemin error
n Error found 07/09/99
n FIND systemhas been corrected
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 40/86
August 1999
LEVN4715Page 40
3126B Mid Year Update8YL Serial Number4New Serial Number Prefix - 8YL4 July 12 Production for GM - July 31st Full Production
4ADEM 2000 ECM - 70 Pin Connector
4One ECM for all OEMs
4Software version - JUL99
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 41/86
August 1999
LEVN4715Page 41
3126B Mid Year Update8YL Serial Numberl Truck Manufacturer Parameter
– Allows for common Hardware & Software on all 3126B engines
– Parameter is programmed at CAT Factory
– Selects Factory Default Parameter Set
– 253-14 Diagnostic Code Active if parameter is Not Programmed
– No OEM Changes Required – Reduces the number of FLASH files released
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 42/86
August 1999
LEVN4715Page 42
3126B Mid Year Update8YL Serial Number
l Engine Running Output – Can be used to prevent Starter Engagement with engine running
– No parameter programming required
– Identical functionality to heavy duty
OUTPUT #413G836-WH
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 43/86
August 1999
LEVN4715Page 43
3126B Mid Year Update8YL Serial Number
l AT/MT/HT Part Throttle Shift Speed
– Selectable shift points Allison non-electronic transmissions
– Regulates shifting - “closed throttle” or “full throttle” modulation
– Provides 3 programmable shift modulation settings
– AT/MT/HT Part Throttle Shift Speed - Default, Mediumor High – Default setting =(80% ON / 65% OFF)
– Mediumsetting =(70% ON / 55% OFF)
– High setting =(60% ON / 45% OFF)
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 44/86
August 1999
LEVN4715Page 44
3126B Mid Year Update8YL Serial Number
l Multi-Speed PTO – Provides 2 additional PTO Set Speeds
– Parameter programming required to enable feature
PTO Configuration - Cab Switches, Remote Switches, or Remote Throttle
Input #7 - PTO Engine RPM Set Speed Input A
Input #19 - PTO Engine RPM Set Speed Input B PTO Engine RPM Set Speed A - Low Idle to PTO TEL rpm
PTO Engine RPM Set Speed B - Low Idle to PTO TEL rpm
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 45/86
August 1999
LEVN4715Page 45
3126B Mid Year Update8YL Serial Number – PTO - Continued
– Requires dedicated Speed Switches and a PTO On/Off Switch
– Provides clean installation / simple configuration
– Set Speed A has priority over Set Speed B
– Set Speeds A & B have priority over all existing rpmcontrol inputs
3126BMidYearUpdate
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 46/86
August 1999
LEVN4715Page 46
3126B Mid Year Update8YL Serial Number
4Multi-Speed PTO Wiring
303544462353
56
P1 J1
OUTPUT #1SETRESUMEINPUT #7INPUT #19AP SENSOR / SWITCH SENSOR COMMONI NPUT SENSO R CO M M O N # 2INPUT #1
CRUI SE CO NTRO LSET/RESUME SWITCH
PTO ON/OFF SWITCHPTO
INTERLOCK
PTO ENGINE RPMSET SPEED A SWITCH
E CM
K998-BUC978-BRC979-ORG844-PK
H795-PK993-BR
K999-GN
+12 V- PTO SWITCHO N L AM P
PTO ENGINE RPMSET SPEED B SWITCH
NOTE: INPUT SENSOR COMMON #1 (TERMINAL-18) MAY BE USED IN PLACEOF INPUT SENSOR COMMON #2 (TERMINAL-3)
3126BMidYearUpdate
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 47/86
August 1999
LEVN4715Page 47
3126B Mid Year Update8YL Serial Number
l Auto Theft Deterrent
– Automatically enables Theft Deterrent when Key is turned OFF
– Driver is not required to enter Password before power down
– Theft Deterrent Feature requires CAT ID 2.1
– New “Auto-Enable” programmable parameter option
Theft Deterrent - Yes, No, Auto-Enable – Provides eligibility for discounts on insurance premium
CAT ID 2.1
3126BMidYearUpdate
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 48/86
August 1999
LEVN4715Page 48
3126B Mid Year Update8YL Serial Number
l Secure Idle
– Integral part of Theft Deterrent feature
– Provides ability to leave vehicle unattended at idle
– Limits engine speed to Low Idle until password is entered
– No Parameter Programming required – To activate Secure Idle:
Bring engine to Idle condition
Enter Theft Deterrent Password on CAT ID
– To deactivate Secure Idle (Theft Deterrent)
Enter Theft Deterrent Password on CAT ID
3126BMidYearUpdate
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 49/86
August 1999
LEVN4715Page 49
3126B Mid Year Update8YL Serial Number
l Fleet Information Software – Data Transfer and Information Management Tool
– Analyze Driver, Vehicle and overall Fleet performance
– Similar to current C-10, C-12 and 3406E applications
–
Histograms – Snapshots
– Cumulative Totals
3126BMidYearUpdate
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 50/86
August 1999
LEVN4715Page 50
3126B Mid Year Update7AS Serial Number
4Software Version - JUN99
4To be used with all ADEM III ECMs Part Numbers 149-6989,149-6990 and 157-3708
4Fixesn Loss of Vehicle Speed following downshift in Cruise Control
n Disable Exhaust Brake in PTO Mode
n PTO Top Engine Limit Below 1600 RPM
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 51/86
August 1999
LEVN4715Page 51
3126B Mid Year Update7AS Serial Number
4Fixes - Continuedn Flash Codes Flash Twice - Both Active and Logged Faults/Events
n PTO Limits are kicked off when PTO Set Speed is Kicked off.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 52/86
August 1999
LEVN4715Page 52
3126B Mid Year Update7AS Serial Number
4New Featuresn High Altitude Inlet Air Heater Strategy
n Above 5500 Ft.
n Turns on for 30 seconds when Inlet Air Temp plus Coolant Temp <53 Deg C. (25C)
n 7 minute and 13 minute Timer based <63C (35C)
n Truck Manufacturer Parametern Software will automatically set - can not be changed
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 53/86
August 1999
LEVN4715Page 53
3126B Service ECMs
ECM 7AS 8YL
1496989 1496989
1496990 1496990 w/ diode kit1573708
1627584 w/JUN99
software
1573708 1496990 w/ diode kit
1573708
1627584 w/Jun99
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 54/86
August 1999
LEVN4715Page 54
Coolant Level Sensor
4No Reliable 2 - pin sensor available4OEM instructed not to use
4ET 2.4 2 - pin Coolant Sensor no longer available
4Change to 4 - pin sensor or programto nonen If none, coolant level monitoring not available
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 55/86
August 1999
LEVN4715Page 55
Electronic Service Tools
C ill El i T h i i
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 56/86
August 1999
LEVN4715Page 56
Caterpillar Electronic TechnicianRelease Information
4Caterpillar Electronic Technician is scheduled forrelease in October 1999.
n Because of the changes made to the software, making it a 32-bitapplication, Caterpillar ET will be version 3.0.
n Caterpillar ET version 3.0 will only support Microsoft Windows 95and NT operating systems.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 57/86
August 1999
LEVN4715Page 57
Software Help Desk Changes
4For authorization, transfers, subscription information, andordering Caterpillar ET contact:
n Caterpillar Media and Product Information Logistics:
n Voice: (800) 566-7782or (309) 266-0942
n Fax: (309) 266-4394
n E-mail: media_logistics@cat.comor
medial(Caterpi llar Host E-mail)
n Hours: 7:00amto 5:00pm
(Central Standard Time)
n Remember... write your Caterpillar ET serial number down and keep it in a safeplace.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 58/86
August 1999
LEVN4715Page 58
Software Help Desk Changes
4For software support of Caterpillar ET and Flash contact:
n SIS Help Desk:
n Voice: (800) 765-0999or (309) 675-0999
n Fax: (309) 675-0725
n E-mail: sishelp@cat.com
n Hours: 6:00amto 9:00pm
(Central Standard Time)
R f t dE i
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 59/86
August 1999
LEVN4715Page 59
Remanufactured EngineSerial Numbers
4The remanufactured engines have a letter-letter-letter prefixon the engine serial number. Caterpillar ET will not allowprogramming of this engine serial number format.
4 If you need to programone of these letter-letter-letter serialnumbers into an ECM, call the SIS Help Desk and ask for fileEtfix24.exe.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 60/86
August 1999
LEVN4715Page 60
Service Technician Workbench
4Ties Caterpillar PC service tools together by giving themcommon:
n support
n training
n installation
n delivery
4Working toward a common look and feel for all service tools.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 61/86
August 1999
LEVN4715Page 61
Service Technician Workbench
4The Service Technician Workbench will initially include:
n DataView
n Caterpillar Electronic Technician (Cat ET)
n Service Information System(SIS)
n Caterpillar Diagnostic Advisorn Engine Performance Estimator
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 62/86
August 1999
LEVN4715Page 62
Service Technician Workbench
4Two examples of the advantages associated with using theService Technician Workbench are:
n Simplified Report Process
n New Feedback Mechanism
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 63/86
August 1999
LEVN4715Page 63
Service Technician Workbench
4Simplified Report Process
•Service Technician
Workbench records the
path you take through the
diagnostic and repair process making reports
easy to create.
•When finished, print the
information recorded as a
service report.
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 64/86
August 1999
LEVN4715Page 64
Service Technician Workbench
4Feedback
Feedback mechanism:
•Records which PC service tool
is in use and then presents a
dialog box for comments andquestions
•Is a communication link to
Caterpillar for desired
improvements for service tools
ProLink9000Cartridge
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 65/86
August 1999
LEVN4715Page 65
Pro-Link 9000 Cartridgefor Truck Engines
Market Truck
Application 3116, 3126, 3176, 3406, C-10, C-12, C-15, and C-16 electronicon-highway truck engines
Description Version 1.09 of the Caterpillar approved cartridge for the Pro-Link9000 hand-held service tool is now available through MPSI (Micro
Processor Systems, Inc.) and its distributors.
Feature/Benefits The cartridge contains all the software needed to adapt thePro-Link 9000 to perform a large number of tests on Caterpillar electronic engines from 1987 to the present.
Availability Target date August 1, 1999
Price 25 cents
Engine Division Product News
Media Number: LEXT9289
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 66/86
August 1999
LEVN4715Page 66
Quick Tip #3
4Rerating Engines To New Horsepower
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 67/86
August 1999
LEVN4715Page 67
1999 Binder Labels
4 Binder Labelsn Power Connection
n SENR5550
n Tech Tips
n SENR5548
n Binder
n SENR2910
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 68/86
August 1999
LEVN4715Page 68
Broadcast Information
4Update Broadcast Videosn LEVN4284 - “Tech Tips” Broadcast - February 11, 1998
n LEVN4384 - “Tech Tips” Broadcast - May 13, 1999
n LEVN4453 - “Tech Tips” Broadcast - August 12, 1998
n LEVN4533 - “Tech Tips” Broadcast - November 11, 1998
n LEVN4590 - “Tech Tips” Broadcast - February 10, 1999
n LEVN4651 - “Tech Tips” Broadcast - May 12, 1999
n LEVN4715 - “Tech Tips” Broadcast - August 11, 1999
nn LEVN3947- Yearly Subscription to Tech TipsLEVN3947- Yearly Subscription to Tech Tips
4Broadcast Schedule for 1999n November 10
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 69/86
August 1999
LEVN4715Page 69
Keepin’ In Touch
4Emailn Caterpillar E-Mail
n TECHTIPS
n Internet E-Mail
n techtips@cat.com
4World Wide Web
n http://www.Cat.comn Engine Spec Sheets
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 70/86
August 1999
LEVN4715Page 70
Electronic Controls Part NumberReference
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 71/86
August 1999
LEVN4715Page 71
Troubleshooting Guide Listing
Latest Truck Engine Electronic Troubleshooting Guides:
Form Number Booklet Description Serial Number Prefixes
RENR2238-00 C-10,C-12 & 3406E 1MM,2KS,2WS,3CS RENR1328-02 C-10,C-12 & 3406E 5DS,8YS,9NS,1LW SENR5582-06 3176B,C-10,C-12 & 3406E 5EK,9CK,1YN,2PN,6TS SENR5503-00 3406C (PEEC III) 4CK SENR3479-05 3406B (PEEC) 2EK,5YG,8TC SENR3913-04 3176 Truck Engine 2YG SENR5112-01 3176 Truck Engine 7LG RENR1367-00 3126B Truck Engine 7AS SENR6566-03 3100 HEUI Truck Engine 8WL,1WM,4ES,2CW
HeavyDutyTruckEngineFLS/FTS
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 72/86
August 1999
LEVN4715Page 72
Heavy Duty Truck Engine FLS/FTSAdjustment Policy
The guidelines for HD Truck FLS/FTS changes for Re-Rates are asfollows:
1. FLS/FTS SHOULD be changed to values listed in JTZ101-02 FLS/FTS LOOKUP FOR RATING CHGS screen for 3406E or GKN401-06 ENGINE TEST SPEC screen for 3176B, C-10, C-12 when: Engine is rerated outside the current rating family. Since rerating outside the current rating family requires a "Reason Code 5" factory password, change FLS/FTS if "Reason Code 5" factory passwords are required. (Example: rerating a 3406E engine froma 475 Hp rating to a 550 Hp rating)
NOTE - When using either of the screens listed above (JTZ101-02 or GKN401-06) it will be necessary to enter the new "Performance Spec" number and the serial number of the engine being rerated. After flashing the new software file, you can find the new performance spec on the ET configuration screen. If you are rerating to a multi-torque rating, be sure to use the FLS/FTS values for the second performance spec listed on the configuration screen.
2. FLS/FTS SHOULD NOT be changed when: Engine is rerated within the current rating family. Since rerating within the current rating family does not require a "Reason Code 5" factory password, do not change FLS/FTS if "Reason Code 5” factory passwords are not required. (Example: rerating a 3406E engine froma 475 Hp, 1650 lb-ft rating to a 475 Hp, 1750 lb-ft rating)
3. FLS/FTS SHOULD be changed to 0/0 when: Engine is rerated to a "field rerate only" rating that is not offered on engines directly fromthe factory. (Example: rerating a 3406E engine froma 375 Hp rating to a 410 field rerate only rating)
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 73/86
August 1999
LEVN4715Page 73
Serial Number Prefixes – 3116/3126
41WM 3126 HEUIn 1995 to Current
48WL 3116 HEUIn 1995 to Current
4
7AS 3126Bn 1998 to Current
SerialNumberPrefixes
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 74/86
August 1999
LEVN4715Page 74
Serial Number PrefixesC-10, C-12 & 31764 2YG 3176
n 1988 to 1990
4 7LG 3176n 1991 to December 1993
4 9CK 3176Bn May 1993 to March 1995
4 2PN C-10n March 1995 to September 1997
4 8YS C-10n September 1997 to November 1998
4 1YN C-12n March 1995 to September 1997
4 9NS C-12n September 1997 to November 1998
4
3CS C10n November 1998 to Current
4 2KS C12n November 1998 to Current
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 75/86
August 1999
LEVN4715Page 75
Serial Number Prefixes - 3406
4
8TC PEEC II and PEEC II.Vn 1987 to 1990
4 5YG PEEC II - 460Hp Onlyn 1990
4 2EK PEEC II and PEEC II.Vn 1991
4 4CK 3406C Electronicn August 1991 to December 1993
4 5EK 3406En May 1993 to December 1996
4 6TS 3406En January 1997 to December 1997
4
1LW3406E 14.6Ln December 1997 - November 1998
4 5DS 3406E 15.8Ln December 1997 - November 1998
4 2WS 3406E 14.6Ln November 1998 to Current
4 1MM 3406E 15.8Ln November 1998 to Current
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 76/86
August 1999
LEVN4715Page 76
3126B Electronic Control and Sensors
4ECM (7AS Basic) 149-6989
(7AS Full Feature w/Jun 99 or New Software & 8YL) 162-7584
4Coolant temperature Sensor - 130-9811 O-Ring Seal 6V6609
4Inlet Manifold temperature Sensor - 130-9811 O-Ring Seal 8L2786
4Speed/Timing Sensors - 119-4142 O-Ring Seal 117-13854Atmospheric Pressure Sensor - 141-4119 O-Ring Seal 6V5049
4Boost Pressure Sensor - 149-7511 O-Ring Seal 3J7354
4Injection Actuation Pressure Sensor - 141-4122 O-Ring Seal 1J9671
4Pedal Position Sensor - 3E7700
4Injector Wiring Harness - 153-8920
4Wire Router - 126-1774
3116HEUI&3126HEUI— Electronic
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 77/86
August 1999
LEVN4715Page 77
3116 HEUI & 3126 HEUI — ElectronicParts
43116 HEUI - 8WL and 3126 HEUI - 1WMn ECM – 145-7807
n ECM Connector Bolt Kit – 6V6703
n 40 Pin Plug Assembly – 114-4408 (includes 110-6844 Seal)
n 40 Pin Connector Seal – 110-6844
n Speed/Timing Sensor Service Kit – 119-4142
n Includes 117-1385 O-Ring Seals
n
Inlet Air Temperature Sensor – 107-8618n Requires 3K0360 Seal
n Coolant Temperature Sensor – 106-0735
n Requires 3K0360 Seal
n Boost Pressure Sensor – 111-2351
n Male/Male Adapter – 9X0262 & 3J7354 – Seal
n Injection Actuation Pressure Sensor – 140-3540
n Requires 108-5803 Seal
n Injection Actuation Pressure Control Valve – 122-5053n Seal Kit 9X1484
n Throttle Position Sensor – 3E7700
n Fuel Transfer Pump to Hydraulic Pump O-Ring – 004-1963
n Hydraulic Pump Dome O-Ring – 6V5656
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 78/86
August 1999
LEVN4715Page 78
Other 3116 HEUI & 3126 HEUI Parts
4Part Numbers missing for Parts Books (3116 HEUI – SEBP2271and 3126 HEUI SEBP2355)
n 123-1199 Seal for Injector and IAPCV Connectors
n 118-8622 Service Replacement Harness
n 40 pin to Injectors
n 122-8840 Service Replacement Harnessn 40 pin to Speed/Timing Sensor
n 122-8842 Service Replacement Harness
n 40 pin to IAPCV
n 122-8839 Service Replacement Harness
n 40 pin to all other sensors
n 141-7060 Injector Wiring Harness Connector Repair Kit
n 143-8325 Injection Actuation Pressure Sensor Guard
C-10 C-12 3176B&3406EPre-’99
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 79/86
August 1999
LEVN4715Page 79
C-10, C-12, 3176B & 3406E Pre-99Current Parts4 C-10 - 2PN & 8YS, C-12 - 1YN & 9NS, 3176B - 9CK & 3406E - 5EK & 6TS, 1LW, 5DS
n Electronic Control Module (ECM) - 145-7806
n ECM with J1939 Data Link Option - 145-7805
n Speed/Timing Sensor
n 3406E — 129-6628 Sensor
n 126-8481 Shim (0.020”)
n
C-10, C-12 & 3176B — 129-6628 Sensor No Shimn Coolant/Fuel Temperature Sensor - 102-2240
n Air Inlet Temperature Sensor - 107-8618
n Boost Sensor - 111-2351
n Atmospheric Pressure Sensor 111-8125
n Oil Pressure Sensor - 111-2350
n Pedal Mounted Throttle Position Sensor - 3E7700
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 80/86
August 1999
LEVN4715Page 80
3176 —2YG Current Parts
43176 - 2YGn ECM - 9X9529 0R6149
n ECM FORD - 9X9528 / 0R6148
n Transducer module - 9X8226 / 0R6132
n Harness - 7E8421
n
Speed/Timing Sensor - 102-9029n Fuel Pressure Sensor - 107-7142
n Coolant Temperature Sensor - 9X5370
n Vehicle Speed Buffer - 3E0020
n Remote Mounted Throttle position Sensor - 9X9647
n Remote Mounted Throttle Position Sensor - FORD - 9X9648
n Pedal Mounted Throttle Position Sensor - 110-8190
C-10 C-12&3406E‘99ModelYear
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 81/86
August 1999
LEVN4715Page 81
C-10, C-12 & 3406E 99 Model YearCurrent Parts4 C-10 - 3CS, C-12 - 2KS, & 3406E - 2WS (14L) & 1MM (16L)
n Electronic Control Module (ECM) - 157-3705
n Speed/Timing Sensor
n C-10, C12 CamSensor - 160-0029
n 3406E CamSensor - 160-0030
n C-10, C-12 & 3406E Crank Sensor - 160-0028
n Coolant/Fuel/Inlet Air Manifold Temperature Sensor - 130-9811
n Boost Pressure Sensor - 161-9929
n Atmospheric Pressure Sensor 161-9925
n Oil Pressure Sensor - 161-9931
n Pedal Mounted Throttle Position Sensor
n Long Pig Tail - 3E-7700
n Short Pig Tail - 121-0231
C-10,C-12,3176B&3406E
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 82/86
August 1999
LEVN4715Page 82
C10, C12, 3176B & 3406EPre-’99 Current Parts
4 C-10 - 2PN & 8YS, C-12 - 1YN & 9NS, 3176B - 9CK & 3406E - 5EK & 6TS,1LW, 5DS
n Electronic Control Module (ECM) - 145-7806
n ECM with J1939 Data Link Option - 145-7805
n Speed/Timing Sensor
n
3406E — 129-6628 Sensorn 126-8481 Shim(0.020”)
n C-10, C-12 & 3176B — 129-6628 Sensor No Shim
n Coolant/Fuel Temperature Sensor - 102-2240
n Air Inlet Temperature Sensor - 107-8618
n Boost Sensor - 111-2351
n Atmospheric Pressure Sensor 111-8125
n Oil Pressure Sensor - 111-2350
n Pedal Mounted Throttle Position Sensor - 3E7700
3176 7LGC tP t
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 83/86
August 1999
LEVN4715Page 83
3176 — 7LG Current Parts
43176 7LGn ECM - 3E5293 / 0R6302
n Transducer Module - 9X8226 / 0R6132
n Altitude Retrofit - 3E8644 / 0R6470
n Speed Timing Sensor - 102-9029
n Oil Pressure Sensor
n “DT” Connector 7LG08721 and Up — 111-2350
n “HD” Connector 7LG07500 to 7LG08720 — 107-7142
n Coolant / Inlet Air Temperature Sensors
n Full Range - 7LG07500 and Up — 102-2240
n Limited Rage - 7LG00001 to 7LG07499 — 9X5370
n
Vehicle Speed Buffer - 3E0020n Remote Mounted Throttle position Sensor - 9X9647
n Remote Mounted Throttle Position Sensor - FORD - 9X9648
n Pedal Mounted Throttle Position Sensor - 110-8190
3406CEl t i C tP t
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 84/86
August 1999
LEVN4715Page 84
3406C Electronic Current Parts
43406C - 4CK n ECM - 9X8085 / 0R6486
n Transducer Module - 132-4363
n Speed Sensor - 100-6619
n Rack Sensor - 9X7793
n
Timing Sensor - 129-4501n BTM - 105-2939
n Coolant Temperature Sensor - 102-2240
n Pedal Mounted Throttle Position Sensor - 110-8190
n Remote Mounted Oil Pressure Sensor Kit - 118-6256
PEECIIVC tP t
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 85/86
August 1999
LEVN4715Page 85
PEEC II.V Current Parts
4PEEC - 8TC and 2EK - FORD Onlyn ECM - 9X4840 / 0R6081
n Transducer Module - 132-4363
n Speed Sensor - 100-6619
n Rack Sensor - 9X7793
n
Timing Sensor - 129-4501n BTM - 105-2939
n Throttle Position Sensor
n Remote Mounted “Beer Can” Sensor - 9X9648
n Pedal Mounted Throttle Position Sensor - 110-8190
n Remote Mounted Oil Pressure Sensor Kit - 122-1649
n If the engine (2EK and 5YG) has had the White Smoke Product Support Programperformed. The following parts will be installed:
n 6I2382 - Wiring Harnessn 9X5370 - Temperature
PEECIIC tP t
7/17/2019 TECH TIPS+ 11+08+1999
http://slidepdf.com/reader/full/tech-tips-11081999 86/86
PEEC II Current Parts
4PEEC II - 8TC, 5YG and 2EK n ECM - 8T8770 / 0R5607
n Transducer Module - 132-4363
n Speed Sensor - 100-6620
n Rack Sensor - 9X7793
n
Timing Sensor - 129-4501n BTM - 105-2939
n Throttle Position Sensor
n Remote Mounted “Beer Can” Sensor - 9X9647
n Pedal Mounted Throttle Position Sensor - 110-8190
n Remote Mounted Oil Pressure Sensor Kit - 122-1649
n If the engine (2EK and 5YG) has had the White Smoke Product Support Programperformed. The following parts will be installed:
n 6I2382 - Wiring Harnessn 9X5370 - Temperature
Recommended