View
4
Download
0
Category
Preview:
Citation preview
teardropmolten glass mosaics
Item used: Smoke | TEAR12SM
www.bellavitatile.com
Ice | TEAR12IC
Smoke | TEAR12SM
Moonstone | TEAR12MO
Tourmaline | TEAR12TO
Sapphire | TEAR12SA
Citrine | TEAR12CI
Garnet | TEAR12GA
teardropmolten glass mosaics
Mimimal Variation
V1
SUGGESTED USES
Suitable for all wall applications including wet areas. Not suitable for submerged environments
Suitable for columns when used vertically
Suitable for interior applications ONLY
Epoxy or urethane based adhesives are not recommended with this product
Application
Wall &Backsplash
Pool(Vertical only)
Counters
Residential Commercial Industrial
Floors
HHBTEAR
www.bellavitatile.com
Item used: Ice | TEAR12IC
At Bellavita we have always created some of the most unique fused glass material but never ventured out of this style of glass
production.
– Until now
Our new Teardrop Collection is a blended process marrying techniques from molten and fused glass production. The end
result is a molded shape mosaic with vibrant iridescent color that retains the translucence of fused glass material.
Teardrop is a true example of the Japanese aesthetic principle Wabi Sabi – perfection through imperfection.
Creating spaces as vibrant and dynamic as you are is easy with Teardrop.
ITEM CODES
Format
12.75x12” Sheet
Ice
TEAR12IC
Smoke
TEAR12SM
Moonstone
TEAR12MO
Tourmaline
TEAR12TO
Sapphire
TEAR12SA
Citrine
TEAR12CI
Garnet
TEAR12GA
PACKAGING
Size PC/CTN
Carton/Pallet
Sqft/ctn(Sqm/ctn)
Sqft/plt(Sqm/plt)
Lbs/ctn(Kgs/ctn)
12.75x12”(327x298)
13 3213.67(1.27)
437.44(40.64)
50.71(23.00)
Lbs/plt(Kgs/plt)
1,622.60(736.00)
Moonstone | TEAR12MO
Tourmaline | TEAR12TO
Sapphire | TEAR12SA
Citrine | TEAR12CI
Garnet | TEAR12GA
Ice | TEAR12IC
Smoke | TEAR12SMItem used: Citrine | TEAR12CI
INSTALLATION & MAINTENANCE
Product is clear molten glass with a glazed rear face. Due to the clear nature of the material some “shadows” may be visible at tile edge when viewed at an angle. This is not a manufacturing defect
Inspect all product prior to installation for any visible defects or unacceptable color/shade variation. Claims are not ac-cepted after installation Install using polymer or latex modified thin set mortars. Do NOT install using mastic and/or epoxy. Flattening trowel ridges is critical with slim glass Suggested grout width is 2mm For best results cutting, use a score & snap glass/tile cutter with a new cutting wheel. If necessary use a wet saw or angle grinder with a blade specifically designed to cut glass After cutting, smooth any rough or sharp edges with a dia-mond honing stone or pad Before gouting follow mortar manufacturer’s instructions to allow for full cure of thin set - usually 36 to 48 hours Grout only with non-sanded cementitious grouts. Using a sanded grout may scratch some surfaces
After initial wash ensure all remaining “grout haze” is buffed off with a dry cloth before 24 hours have elapsed
To clean use a damp sponge with warm water. For heavy cleaning use a non-abrasive cleaner with a damp sponge.
TECHNICAL SPECIFICATIONS
Technical Characteristics
ASTM Test Result
ASTM/ANSI Test Method
Water Absorption %
Frost Resistance
Scratch Resistance
ChemicalResistance
0%
Pass
5.5
Highly Resistant
A 187.1
C1026
MOHS
C650
FORMAT
12.75 x12"327 x 298mm
2.5 x1"60 x 26mm
Sheet Dimension
Module Dimension
Recommended