View
2
Download
0
Category
Preview:
Citation preview
-5372 -5382
Q� Tabbed Reversal Brackets Q� Brackets with Single Side Tab
Q� One-Side Rib Brackets
Q� Nut Mounting Brackets
30
28
2-Ø5.2
5 12
21
28
12
2128
12
57
M5(When specifying alteration C)
HBLFSL5HBLFSLB5(Cathodic Electrodeposition Paint: Black)
HBLFSLM5(Electroless Nickel Plating)
3028
1
12
2128
12
21
28
5
1
3− 5.3
M5(When specifying alteration C)
Cover
HFS5-2020Extrusion
Bracket
Part NumberHBLFSN5HBLFSL5HBLFSR5
HBLFSNK5HBLFSNT5
5 Series6 20, 25, 40
When nuts are wedged through until the tab, hole positions of bracket and nuts are aligned and fine adjustment becomes unnecessary.X� Short Nuts, HNTM and HNTAM are not applicable.
o_22_41_09
HBLFSNK5HBLFSNE5
30
2010
103-Ø5.2*
M5
30
18
18
104.5
(When specifying alteration C)
12 18 3
0
12
1
1830
4.5
10
M5
3-Ø5.2
(When specifying alteration C)
HBLFSNK5 Side View
* Use one hole out of the two holes on the bottom.(Depends on the attaching direction)
HBLFSNE5 Side View
4.5
1
1218
30
12
18
10
30
M5(When specifying alteration C)
o_06_41_09
3-Ø5.2
HBLFSR5 2010
10
28
284
5.2
6
11.71215
22.328
20
12
12
12
428
M5(When specifying alteration C)
E�� Slotted holes are for various nut hole positions.
E��� Bracket tabs may be damaged when nuts are fallen on them.
E��� Use of washers are recommended. (Refer to alterations on the next page: SEC)
QFeatures: Tabbed Brackets to be connected by both L and Cross-Connections.
QFeatures: Pressing nuts against the long tabs makes cumbersome hole positioning unnecessary.
QFeatures: Brackets with single side tabs. Panels can be mounted on the side without tabs as shown in the app. example.
Can be combined with both cover plates of 5mm and 3mm thickness.
3
HFS5-2020
HBLFSL5
There are protrusions tobe inserted into slots.(Protrusion Dimension 1mm)
5
Use one of the two holes on bottom, depending on mounting direction.* Cross-Connection is not available for 25 Square Extrusions.
Q��HBLFSNF5 prevents brackets from protruding from extrusions when cross-connected.
Ex.1 Ex.2
L-Connection Cross-Connection
30
2010
103-Ø5.3*
M5
3018
18
104.5
(When specifying alteration C)
* Ø4.2 for HBLFSN5-4.
1
12 18 3
0
1218
30
4.5
10
13-Ø5.3*
M5(When specifying alteration C)
HBLFSN5HBLFSN5-4(For M4 Screw)
HBLFSNB5(Black Anodize)
HBLFSNM5(Electroless Nickel Plating)
CHBLFSN5(Baked Paint, Silver)
• Tabbed Reversal Brackets
HBLFSNF5
• Tabbed Reversal Brackets(Depth 20m)
4.510
1
1220
20
204.5
1010
30
18
301812
1
M5(When specifying alteration C)
M5(When specifying alteration C)
2-Ø5.2
2-Ø5.2
4.510
1
1220
20
204.5
1010
30
18
301812
1
M5(When specifying alteration C)
M5(When specifying alteration C)
2-Ø5.2
2-Ø5.2
Tabbed Brackets - For 1 SlotFor 5 Series (Slot Width 6mm) Aluminum Extrusions
M Material: EN AC-46100 Equiv. (Main Body), Polyamide Black (Cover)
M Material: EN AC-46100 Equiv.
1
3
5
2
4
6
Type M Material S Surface TreatmentHBLFSSW5 EN AC-
46100 Equiv.-
HBLFSSWB5 Black Anodize
HFS5-4040Extrusion
Can be connected in parallel and perpendicular directions to the extrusion slot.
QFeatures: Tabbed Reversal Brackets with two mounting holes on one side can connect extrusions more securely.
Q� Tabbed Reversal Brackets 10
4-Ø5.2
M5
5
10
38
30
3745
22
(When specifying alteration C)
10
(See Fig. 2)
0.8
0.8
5
4537
22
12
4-Ø5.2
1012
3038
M5(When specifying alteration C)
HBLFSSW5HBLFSSWB5(Black Anodize)
M Material: EN AC-46100 Equiv.
* Baked Paint (Silver) is color coordinated with Clear Coating Extrusions.
Type M Material S Surface Treatment1HBLFSNF5
EN AC-46100 Equiv.
-2HBLFSN53HBLFSN5-44HBLFSNB5 Black Anodize5HBLFSNM5 Electroless Nickel Plating6CHBLFSN5 Baked Paint (Silver)
Part NumberMass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount RateType Screw Quantity T Nut Quantity 1~99 pc(s). 100~200
HBLFSL5
13 CBM5-10 2 HNTT5-5 2 1176HBLFSLB5(Cathodic Electrodeposition Paint: Black)
HBLFSLM5(Electroless Nickel Plating)
QFeatures: One-Sided Tabbed Rib Brackets. Easy to work with wrenches.* For repairing black anodizing, refer to P.846.
Part Number Mass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount RateType Screw Quantity T Nut Quantity 1~99 pc(s). 100~200
HBLFSNF5 13 CBM5-10
2
HNTT5-5
2 1176
HBLFSN5
15
HBLFSN5-4(For M4 Screw)
CBM4-10 HNTT5-4
HBLFSNB5*(Black Anodize)
CBM5-10 HNTT5-5HBLFSNM5(Electroless Nickel Plating)
CHBLFSN5(Baked Paint, Silver)
Example of HBLFSNK5
Example of HBLFSNE5
• Can be mounted on a plate directly.
Part Number Mass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount RateType Screw Quantity T Nut Quantity 1~99 pc(s). 100~200
HBLFSNK5 15 CBM5-10 2 HNTT5-5 2 1176HBLFSNE5
Part Number Mass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount RateType Screw Quantity T Nut Quantity 1~99 pc (s). 100~200
HBLFSR5 15 CBM5-10 2 HNTT5-5 2 1176
Type M Material S Surface TreatmentHBLFSL5 EN AC-
46100 Equiv.
-HBLFSLB5 Cathodic Electrodeposition Coating: BlackHBLFSLM5 Electroless Nickel Plating
Q� Brackets with Cover HBLFSNT5
32
20
3230
12
12
30
M5(When specifying alteration C)
32
Brackets
1218
30
4.5
1
1010
2010
12 18 3
0
o_01_41_09
M5 3-Ø5.2
(When specifying alteration C)
Cover
33
19
24
338
3.75
33
19
24
338
3.75
QFeatures: Tabbed Reversal Brackets with Cover. Designed to prevent dust build-up.
* For repairing black anodizing, refer to P.846.
Part Number Mass (g)Applicable Screw, T Nut Allowable
Load (N)Unit Price Volume Discount Rate
Screw Quantity T Nut Quantity 1~99 pc(s). 100~200HBLFSSW5
24 CBM5-10 4 HNTT5-5 4 1470HBLFSSWB5*(Black Anodize)
Part Number Mass (g)
Applicable Screw, T Nut Allowable Load (N)
Unit Price Volume Discount RateType Screw Quantity T Nut Quantity 1~99 pc(s). 100~200
HBLFSNT5 17 CBM5-10 2 HNTT5-5 2 1176
M5
HCBM5-10(P.754)
Specify alteration code C.
Part Number - (C, SET, SST, SEU, SSU, SEP, SSP, SEC)
HBLFSNK5 - SET
Alterations Code Spec. Applicable Bracket
Mounting Hole
Alteration for Cover
C
Adds taps on a bracket for cover mounting. (M5 on Both Sides)(Mounting Screw HCBM on P.754)
HBLFSNF5HBLFSN5HBLFSN5-4HBLFSNB5HBLFSNM5CHBLFSN5HBLFSL5
HBLFSLB5HBLFSLM5HBLFSR5
HBLFSNK5HBLFSNE5HBLFSNT5HBLFSSW5HBLFSSWB5
Alterations Code Spec. Applicable Bracket
Applicable Screws and
Nuts Set
SETSST
(Stainless Steel)SEU
Pre-Assembly Insertion Spring
NutsSSUPre-Assembly
Insertion Spring Nuts Stainless SteelSEPPost-Assembly
Insertion Spring NutsSSP
Post-Assembly Insertion Spring Nuts
Stainless SteelSECScrews with
Captured Washer and Nuts
Applicable screws and nuts for fixing the brackets on extrusions come in a set. (Adds to the bracket price.) HBLFSNF5
HBLFSN5
HBLFSN5-4
HBLFSNB5
HBLFSNM5
CHBLFSN5
HBLFSL5
HBLFSLB5
HBLFSLM5
HBLFSR5
HBLFSNK5
HBLFSNE5
HBLFSNT5
HBLFSSW5
HBLFSSWB5
EScrews for Black Anodized Brackets and Cathodic Electrodeposition Painted (black) Brackets are HCBMTB (Trivalent Chromate Black) on P.751.EIncluded Screw is not RoHS compliant when -SET, -SEU or -SEP other than Black Anodized or Cathodic Electrodeposition Painted (black) Brackets is specified.
( )
( )( )
( )( )
(Ex.) When HBLFSN5 is specified:Code Screw Nut
SET CBM5-10 HNTT5-5SST SCB5-10 HNTTBS5-5SEU CBM5-10 HNTU5-5SSU SCB5-10 SHNTU5-5SEP CBM5-10 HNTP5-5SSP SCB5-10 SHNTP5-5SEC HCBST5-12 HNTT5-5E��When specifying other than
HBLFSN5, check for the applicable screws and nuts.
Recommended