SXS700M4/M4D, SXS1000M3/M3P/M5P/M5D: Drink...

Issue DateINSTALLATION

INSTRUCTIONS

Accessory Application Publication No.

MII 15753

© 2016 Honda Motor Co., Ltd. - All Rights Reserved.

PARTS LIST

08U70-HL3-A401 of 2

DRINK HOLDER

P/N 08U70-HL3-A40

SXS700M4/M4DSXS1000M3/M3P/M5P/M5D

No. Description Qty

(1) Drink holder 2

(2) Trim clip 8

TOOLS AND SUPPLIES REQUIREDPower drill

Drill bit (8 mm)

Revised:November 2016

INSTALLATIONSXS700M4/M4D REAR DOOR

1. Drill through the four dimpled areas in the rear door using an 8 mm drill bit as shown.

DIMPLED AREA

2. Install the drink holder with four trim clips through the holes drilled in Step 1 as shown.

DRINK HOLDER

TRIM CLIPP

(2)

(1) REAR DOOR

2 of 2

SXS1000 FRONT DOOR

1. Drill through the four dimpled areas in the front door using an 8 mm drill bit as shown.

DIMPLED AREA

2. Install the drink holder with four trim clips through the holes drilled in Step 1 as shown.

SXS1000 REAR DOOR

1. Drill through the four dimpled areas in the rear door using an 8 mm drill bit as shown.

DIMPLED AREA

2. Install the drink holder with four trim clips through the holes drilled in Step 1 as shown.

TRIM CLIP

DRINK HOLDER

FRONT DOOR REAR DOOR