View
220
Download
0
Category
Preview:
Citation preview
8/3/2019 stergator picioare
1/24
Catalogue 2007
Entrance
Matting
Systems
Entrance
Matting
Systems
8/3/2019 stergator picioare
2/242
Since our establishment 60 years ago,Geggus EMS (Entrance Matting Systems)has gained an enviable reputation for thequality and innovation of our entrancematting range.
Geggus EMS systems are produced in awide range of styles from the highestquality materials ideally suited to todays
heavy traffic entranceways.They are designed for a wide variety ofapplications to compliment interior andexterior styling.
Very simply there is no better way of ma-king first impressions last than GeggusEMS, as our many worldwide customershave found.
I AudiI British AirwaysI Deutsche BankI Deutsche BundesbankI EnBWI European ParliamentI General MotorsI Mercedes BenzI Munich Exhibition CentreI VolkswagenI Wulfrun CentreI ZKM
plus hotels, hospitals and airports in:
I BerlinI DubaiI DublinI Hong KongI
LondonI OsloI ParisI PragueI ShanghaiI SingaporeI StrasbourgI TokyoI Warsaw
and throughout the World
8/3/2019 stergator picioare
3/243
Why Entrance Matting Systems?Foot-borne dirt carried inside buildings can be abrasive to sensitive finishes li-ke marble, timber or laminates. Many surfaces will be made slippery by mo-isture introduced on visitors feet which can compromise safety. Increased we-ar on carpets and other types of floor covering can occur from dirt carried onfootwear and the impression created by a carefully designed entrance will bespoiled.
An efficient entrance matting system needs to address all these considera-tions by removing dirt, moisture and grit introduced on visitors feet, before it
can be carried inside the building.
WhyEntrance Matting Systems?
Geggus EMS has been carefully developed to not only be an effective dirtbarrier by removing dirt, grit and moisture before it has a chance to effectinterior floor finishes, but to compliment the most stylish entranceways - both
outside and inside a doorway.Geggus EMS has been constructed in such a way that it can be easily keptclean and have sections replaced where the mat surface becomes damaged.
Geggus EMS also gives you the choice of a wide range of designs, coloursand finishes to compliment todays finest buildings and can be offered in vir-tually any shape to precisely suit any entranceway.
ContentsTop Clean Trend Ribbed Carpet 4
Top Clean Trend Ribbed Carpet with Scraper Bar 5
Top Clean Trend Ribbed Carpet with Cassette Brush 6
Top Clean Trend Ribbed Carpet and Brush Strip 7
Top Clean Trend Grooved Rubber 8
Top Clean Trend Grooved Rubber with Cassette Brush 9
Top Clean Trend Grooved Rubber with Brush Strip 10
Top Clean Trend Cassette Brush 11
Top Clean Stabil 12
Top Clean Combinations 13
Top Clean Light Ribbed Carpet 14
Top Clean Light Grooved Rubber 15
Top Clean Object Extreme Heavy Duty 16
Top Clean Trend Cassette Brush with Logo 17
Special Matting Frames 18
Planning for Geggus EMS Matting System 19
Measuring for Specification 20
Cleaning and Maintance 21
Accessories 22
Fax Sheet 23
8/3/2019 stergator picioare
4/24
Usage
Recommended for fully covered entrance areas in commercial or residentialuse where excellent absorption of moisture and removal of dirt is of primeimportance.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coatedAISI 316 Stainless steel wire rope
I UV resistant polypropylene high density ribbed carpetI Available Colours: Anthracite, Light Grey, Mottled Beige, Mottled Blue;
Mottled Green and Blue only for Top Clean Trend 17, 22 and 27 mm
I Pile weights:Fine Ribbed Carpet: 900g/m2, total weight: ca. 1250g/m2
Heavy Duty Ribbed Carpet: 1700 g/m2, total weight: ca. 3000g/m2
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 10 mm, 17 mm, 22 mm and 27 mm
I Profile spacing:Top Clean Trend 17 mm, 22 mm and 27 mm: 4 mm, 6 mm and 8 mmTop Clean Trend 10 mm only 4 mm spacing
I Dimensions: Available in any given dimensions for length of
aluprofiles (left to right) and walking direction (front to back)without compensation profilGaps/curves and diagonal can be manufactured according to drawingor template
I Profile can be supplied powder coated to any RAL colour
Anthracite Light Grey
Available Colours: Top Clean Trend 17 mm, 22 mm or 27 mm, Heavy Duty Ribbed Carpet
Available Colours: Top Clean Trend 10 mm, Fine Ribbed Carpet
Mottled Green Mottled Beige Mottled Blue Blue
Anthracite Light Grey Mottled Beige Blue
20mm
25mm
30mm
Height
Frame
Height
Mat
4mm
6mm
8mm
17mm
22mm
27mm
Top Clean Trend Ribbed Carpet
4
15mm
HeightFrame
HeightMat
10mm
4mm
8/3/2019 stergator picioare
5/24
Usage
Recommended for fully covered entrance areas in commercial or residentialuse, where excellent absorption of moisture and removal of dirt is of primeimportance with the additional benefit of greater removal of dirt by thescraper bars for added protection and greater longevity of the ribbed carpetand interior floor coverings.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coatedAISI 316 Stainless steel wire rope
I UV resistant polypropylene high density ribbed carpet
I Available Colours: Anthracite, Light Grey, Mottled Beige, Mottled Blue;Mottled Green and Blue only for Top Clean Trend 17, 22 and 27 mm
I Pile weights:Fine Ribbed Carpet: 900g/m2, total weight: ca. 1250g/m2
Heavy Duty Ribbed Carpet: 1700 g/m2, total weight: ca. 3000g/m2
I A hard wearing warp resistant aluminium scraper bar is used betweencarpet inserts
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 10 mm, 17 mm, 22 mm and 27 mm
I Profile spacing: 4 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profileGaps/curves and diagonal can be manufactured according to drawingor template
I Profile can be supplied powder coated to any RAL colour
Height
Frame
Height
Mat
20mm
25mm
30mm
Scraper Bar
Top Clean Trend Ribbed Carpet with Scraper Bar
5
17mm
22mm
27mm
4mm 4mm
15mm
HeightFrame
HeightMat
10mm
4mm 4mm
Anthracite Light Grey
Available Colours: Top Clean Trend 17 mm, 22 mm or 27 mm, Heavy Duty Ribbed Carpet
Available Colours: Top Clean Trend 10 mm, Fine Ribbed Carpet
Mottled Green Mottled Beige Mottled Blue Blue
Anthracite Light Grey Mottled Beige Blue
8/3/2019 stergator picioare
6/246
Colours: Anthracite Light Grey Mottled Green Mottled Beige Mottled Blue Blue GreyCassette Brush: Black
20mm
25mm
30mm
4mm
6mm
8mm
17mm
22mm
27mm
Top Clean Trend Ribbed Carpet with Cassette Brush Patent-Nr.: DE 4407231
Usage
Recommended for fully covered entrance areas in commercial or residentiallocations particularly where there is a need to protect marble, wooden or
laminate flooring. The Cassette Brush elements provide added removal ofgrit and stones.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coatedAISI 316 Stainless steel wire rope
I UV resistant polypropylene high density ribbed carpet
I Available Colours: Anthracite, Light Grey, Mottled Beige, Mottled Blue;
Mottled Green and Blue only for Top Clean Trend 17, 22 and 27 mmCassette Brush: Black and grey
I Pile weights:Fine Ribbed Carpet: 900g/m2, total weight: ca. 1250g/m2
Heavy Duty Ribbed Carpet: 1700 g/m2, total weight: ca. 3000g/m2
I Alternating with 6.6 Grade Nylon Brushes in a warp resistantaluminium profile
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 17 mm, 22 mm and 27 mm
I Profile spacing:Top Clean Trend 17 mm, 22 mm and 27 mm: 4 mm, 6 mm and 8 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I Gaps/curves and diagonal can be manufactured according to drawingor template
I Profile can be supplied powder coated to any RAL colour
Height
Frame
Height
Mat
8/3/2019 stergator picioare
7/247
Colours: Anthracite Light Grey Mottled Green Mottled Beige Mottled Blue Blue Blue Grey BlackBrush Strip:
20mm
25mm
17mm
22mm
4mm
6mm
8mm
4mm
6mm
8mm
Patent-Nr.: DE 4407231 Top Clean Trend Ribbed Carpet and Brush Strip
Usage
An alternative style option to Ribbed Carpet with Cassette Brush fulfillingthe same functions within fully covered areas where additional dirt removal
may be required.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coated AISI316 Stainless steel wire rope
I UV resistant polypropylene high density ribbed carpet
I Available Colours:Ribbed carpet: Anthracite, Light Grey, Mottled Beige, Mottled Blue,Blue, Mottled GreenBrush strip: Black, grey and blue
I Pile weights: Heavy Duty Ribbed Carpet: 1700 g/m2, total weight:ca. 3000g/m2
I Alternating with a 6.6 Grade Nylon Brush strip secured in a warpresistant aluminium profile
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 17 and 22 mm
I Profile spacing: 4 mm, 6 mm and 8 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I Gaps/curves and diagonal can be manufactured according to drawingor template
I Profile can be supplied powder coated to any RAL colour
Height
Frame
Height
Mat
8/3/2019 stergator picioare
8/248
20mm
25mm
30mm
4mm
6mm
8mm
20mm
22mm
27mm
Top Clean Trend Grooved Rubber Patent-Nr.: DE 4407231
Usage
For use where a weather-proof, corrosion resistant mat is required inexternal or internal residential or commercial areas for the initial removal
of dirt, grit and moisture. Also applicable to stylish interior use.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coated AISI316 Stainless steel wire rope
I With solid EPDM grooved rubber inserts conforming to DIN 7863
I Available Colours: Black
I Base of mat is mechanically fitted with rubber inserts for anti slip
and noise reductionI Heights: 10 mm, 17 mm, 22 mm and 27 mm
I Profile spacing:Top Clean Trend 17 mm, 22 mm and 27 mm: 4 mm, 6 mm and 8 mmTop Clean Trend 10 mm only 4 mm spacing
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I Gaps/curves and diagonal can be manufactured according to drawingor template
I Profile can be supplied powder coated to any RAL colour
Colour: Black
Height
Frame
Height
Mat
15mm
Height
Frame
Height
Mat
10mm
4mm
8/3/2019 stergator picioare
9/249
20mm
25mm
30mm
4mm
6mm
8mm
17mm
22mm
27mm
Patent-Nr.: DE 4407231 Top Clean Trend Grooved Rubber with Cassette Brush
UsageFor use where a weather-proof, corrosion resistant mat is required inexternal or internal residential or commercial areas for the initial removal
of dirt, grit and moisture. With the additional benefit of the cassette brushfor extra removal of grit and stones particularly where interior floor surfacessuch as marble, wood or laminate may be vulnerable. Also applicable tostylish interior use.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coated AISI316 Stainless steel wire rope
I With solid EPDM grooved rubber inserts conforming to DIN 7863
I Alternating with 6.6 Grade Nylon Brushes secured in warp resistantaluminium profile
I Available Colours: Grooved Rubber: BlackCassette Brush: Black and grey
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 17 mm, 22 mm and 27 mm
I Profile spacing:Top Clean Trend 17 mm, 22 mm and 27 mm: 4 mm, 6 mm and 8 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I Gaps/curves and diagonal can be manufactured according to drawingor template
I Profile can be supplied powder coated to any RAL colour
Colours: Black Cassette Brush: Grey Black
Height
Frame
Height
Mat
8/3/2019 stergator picioare
10/2410
20mm
25mm
4mm
6mm
8mm
17mm
22mm
4mm
6mm
8mm
Top Clean Trend Grooved Rubber with Brush Strip Patent-Nr.: DE 4407231
Usage
An alternative style to Grooved Rubber and Cassette Brush for use where aweather-proof, corrosion resistant mat is required in external or internal
residential or commercial areas for the initial removal of foot-borne dirt andmoisture. With the additional benefit of brush strips for extra removal ofgrit and stones. Also applicable to stylish interior use.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coated AISI316 Stainless steel wire rope
I With solid EPDM grooved rubber inserts conforming to DIN 7863
I Alternating with 6.6 Grade Nylon Brush Strip secured in warp resistant
aluminium profile
I Available Colours: Grooved Rubber: BlackBrush strip: Black, grey and blue
I Base of mat is mechanically fitted with rubber inserts for anti slipand noise reduction
I Heights: 17 mm and 22 mm
I Profile spacing: 4 mm, 6 mm and 8 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)
without compensation profileI Gaps/curves and diagonal can be manufactured according to drawing
or template
I Profile can be supplied powder coated to any RAL colour
Colours: Black Blue Gry BlackBrush Strip:
Height
Frame
Height
Mat
8/3/2019 stergator picioare
11/2411
20mm
25mm
30mm
4mm
6mm
8mm
17mm
22mm
27mm
Patent-Nr.: DE 4407231 Top Clean Trend Cassette Brush
UsageRecommended for external use where a weatherproof surface is requiredgiving the maximum removal of grit and dirt for best possible protection
of vulnerable interior floors such as marble, wood or laminate.Also applicable to stylish interior use.
Specification
Industry standard matting featuring:
I Warp resistant aluminium profile interconnected with PVC coatedAISI 316 Stainless steel wire rope
I 6.6 Grade Nylon Cassette Brushes secured in a warp resistantaluminium profile
I
Available Colours: Cassette Brush: Black and greyI Base of mat is mechanically fitted with rubber inserts for anti slip
and noise reduction
I Heights: 17 mm, 22 mm and 27 mm
I Profile spacing:Top Clean Trend 17 mm, 22 mm and 27 mm: 4 mm, 6 mm and 8 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I Gaps/curves and diagonal can be manufactured according to drawing
or templateI Profile can be supplied powder coated to any RAL colour
Cassette Brush: Grey Black
Height
Frame
Height
Mat
8/3/2019 stergator picioare
12/2412
25mm
4mm
22mm
Top Clean Stabil Heavy Duty
UsageStabil is the heavy duty version of Top Clean Trend and is specifically desi-gned for areas of heavy foot traffic or trolley movement such as supermar-
kets, department stores or airport terminals
Specification
I Top Clean Stabil 22: 2,5 mm thick warp resistant aluminium profilesinterconnected with PVC coated AISI 316 Stainless steel wire rope
I Top Clean Stabil 17: 1,5 mm thick warp resistant aluminium profilesinterconnected with PVC coated AISI 316 Stainless steel wire rope
I Insert Options: Many different combinations of profile inserts are availa-ble as detailed in the photographs opposite UV resistant polypropylene high density ribbed carpet
Solid EPDM grooved rubber inserts conforming to DIN 7863 6.6 Grade Nylon Brush Strip secured in warp resistant
aluminium profile 6.6 Grade Nylon Cassette Brushes secured in a warp resistant
aluminium profile EXTRA HEAVY DUTY Aluminium Scraper
I Available Colours: Ribbed Carpet: Anthracite, Light Grey, Mottled Beige, Mottled Blue
Blue, Mottled Green Grooved Rubber: Black
Cassette Brush: Black and greyI Pile weights: Heavy Duty Ribbed Carpet: 1700 g/m2,
total weight: ca. 3000g/m2
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 17 mm and 22 mm
I Profiles spacing: 4 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I Gaps/curves and diagonal can be manufactured according to drawingor template
I Profiles can be supplied powder coated to any RAL colour
Colours: Anthracite Light Grey Mottled Green Mottled Beige Mottled Blue Blue
Height
Frame
Height
Mat
Thickness: 2,5 mm
Thickness: 1,5 mm
20mm
Height
Frame
Height
Mat
8mm
17mm
New
8/3/2019 stergator picioare
13/2413
Top Clean Stabil
Ribbed Carpet
Top Clean StabilRibbed Carpet and Scraper Bar
Top Clean StabilRibbed Carpet and Cassette Brush
Top Clean StabilRibbed Carpet and Alu Scraper
(Only available in 22 mm Height)
Top Clean StabilGrooved Rubber
Top Clean StabilGrooved Rubber and Cassette Brush
Colours: Grooved Rubber: Black Alu Scraper Cassette Brush: Grey Black
Top Clean Stabil Combinations
8/3/2019 stergator picioare
14/2414
Top Clean LightRibbed Carpet
UsageRecommended for interior light commercial and residential areas. Beingonly 10 mm high, Top Clean Light requires only a shallow well and can
even be surface mounted in applications where a fitting well is impracticalor undesirable.
Specification
I Warp resistant aluminium profiles interconnected with rubber linkingelements
I UV resistant polypropylene fine ribbed carpet inserts
I Available Colours:Ribbed carpet: Anthracite, Light Grey, Mottled Beige, Mottled Blue,
I
Pile weights:Fine Ribbed Carpet: 900g/m2, total weight: ca. 1250g/m2
I Base of mat is mechanically fitted with Polyethylene foam underneathfor anti slip and noise reduction
I Height: 10 mm
I Profile spacing: 5 mm
I Dimensions: Available in any given dimensions for length of aluprofiles(left to right) and walking direction (front to back). Possibly with acompensation profile
I ONLY RECTANGULAR MATS ARE AVAILABLE FOR TOP CLEAN
LIGHT: NO GAPS, CURVES OR DIAGONAL CUTTINGI Profiles can be supplied powder coated to any RAL colour
Available Colours: Anthracite Light Grey Mottled Beige Mottled Blue
15mm10mm
Height
Frame
Height
Mat
8/3/2019 stergator picioare
15/2415
Top Clean LightGrooved Rubber
UsageRecommended for interior light commercial and residential areas. Beingonly 10 mm high, Top Clean Light requires only a shallow well and can
even be surface mounted in applications where a fitting well is impracticalor undesirable.
Specification
I Warp resistant aluminium profiles interconnected with rubber linkingelements
I With solid EPDM grooved rubber inserts conforming to DIN 7863
I Available Colour: Grooved rubber: Black
I Base of mat is mechanically fitted with Polyethylene foam underneath
for anti slip and noise reductionI Height: 10 mm
I Profile spacing: 5 mm
I Dimensions: Available in any given dimensions for length of aluprofiles(left to right) and walking direction (front to back). Possibly with acompensation profile
I ONLY RECTANGULAR MATS ARE AVAILABLE FOR TOP CLEAN LIGHT:NO GAPS, CURVES OR DIAGONAL CUTTING
I Profiles can be supplied powder coated to any RAL colour
Grooved Rubber available Black only
15mm10mm
Height
Frame
Height
Mat
8/3/2019 stergator picioare
16/2416
Top Clean ObjectExtreme Heavy Duty
UsageTop Clean Object was especially designed for extremely high frequentedfoot traffic or trolley movement such as supermarkets, department stores
or airport terminals. Recommended for fully covered entrances, whereexcellent absorption of moisture and removal of dirt is of prime importance.Due to the extreme strong profile with a thickness of ca. 3 mm the matcould also be crossed by a pallet truck or fork lift.
Specification
I 3 mm thick warp resistant aluminium profiles interconnected with PVCcoated AISI 316 Stainless steel wire rope
I UV resistant polypropylene high density ribbed carpet
I Available Colours: Ribbed Carpet: Anthracite, Light Grey
I Pile weights:Heavy Duty Ribbed Carpet: 1700 g/m2, total weight: ca. 3000g/m2
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 22 mm, 27 mm and 42 mm
I Profiles spacing: 5 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I
Gaps/curves and diagonal can be manufactured according to drawingor template
I Profiles can be supplied powder coated to any RAL colour
Available Colours: Anth racite Light Grey
New
46mm
5mm
42mm
Height
Frame
Height
Mat
30mm27mm
HeightFrame
HeightMat5mm
25mm22mm
Height
Frame
Height
Mat5mm
8/3/2019 stergator picioare
17/2417
Top Clean Trend Cassette Brush with Logo
25mm
4mm
8mm
22mm
UsageRecommended for external use where a weatherproof surface is required,giving the maximum removal of grit and dirt. Whilst displaying your
company logo the mat stops dirt and moisture thus protecting the floor andreducing cleaning costs considerably. Also applicable to stylish interior use.
Specification
I Industry standard matting featuring:
I Warp resistant aluminium profiles interconnected with PVC coatedAISI 316 Stainless steel wire rope
I 6.6 Grade Nylon Cassette Brushes secured in a warp resistantaluminium profile
I Available Colours:
Basis colour Cassette Brush: Combination of Black and greyColour for the logo (maximum two colours). Nearly to RAL colour
I Base of mat is mechanically fitted with rubber inserts for anti slip andnoise reduction
I Heights: 17 mm and 22 mm
I Profiles spacing: 4 and 8 mm
I Dimensions: Available in any given dimensions for length ofaluprofiles (left to right) and walking direction (front to back)without compensation profile
I
Gaps/curves and diagonal can be manufactured according to drawingor template
I Profiles can be supplied powder coated to any RAL colour
Height
Frame
Height
Mat
Primary Colour Cassette Brush: Black-Grey
New
8/3/2019 stergator picioare
18/24
Special Matting Frames
18
Specification
Special Matting Frames
Usage
It is recommended that for all Geggus EMS matting systems frames arerequired unless there is a pre-existing frame. They provide an accurate base
within the mat well upon which to seat a mat. A correctly sized frameholds the mat rigidly in place and allows ease of access to mat
well for cleaning purposes or removal of the mat. TopClean Trend 10 mm and 17 mm can be used surfacemounted with the Special Ramped Edge Frame inapplications where a fitting well is impractical or
undesirable (please also see page 22).
Specification
3 mm gauge profile in Aluminium, Brass or Stainless Steel available in avariety of depths and widths to suit your installation. To establish which sizematches your selected matting system see below.
All frames are supplied precision drilled with accurately mitred corners andspecially designed corner pieces to maintain an accurate and square assembly.
Fitting
Frames must be installed level andtrue and screeded into the mat well tothe correct depth. Geggus EMS recom-
mend the use of a self-levelling scree-ding compound. Special attentionshould be paid to the final level of theframe with the mat installed.
For installations of over 3000mm width,mats will be supplied in two or moresections and the frame will be supplied to suit. For frames of over 1 metrein length, frame sections are supplied with anchor plates riveted into positionto allow the frame to be securely screeded into position. Drain holes must beprovided in all exterior installations.
Custom Made Frames
To match custom shaped mat installations, Geggus producecustom made frames to suit. The red lines indicate the type of shapewhere additional charges are incurred. For specifying your requiredshape accurately please refer to measuring instructions on Page 19.
Aluminium
Height Width Thickness
15 20 3 mm
20 20 3 mm
25 25 3 mm30 30 3b mm
Height of the mat
10 mm
17 mm
22 mm27 mm
Brass
Height Width Thickness
15 20 3 mm
20 20 3 mm
25 25 3 mm30 30 3 mm
Stainless Steel
Height Width Thickness
15 20 3 mm
20 20 3 mm
25 25 3 mm30 30 3 mm
8/3/2019 stergator picioare
19/2419
Planning for Geggus EMS Matting System
When planning the installation of a Geggus EMS matting system the follo-wing points need to be considered.
Optimum EffectivenessThe mat sits in a frame set into a well in the floor. How to measure for thisframe and well is described on page 18.
Surface MountingThis can easily be achieved with the Top Clean Trend 10 mm and 17mm whichcan be supplied with a Ramped Edge Frame (please also see page 22).
Traffic DirectionThe installation of the mat should always be with the aluminium profiles at
right angles to the traffic direction.
Larger InstallationsFor entrance mat installation of over 3000mm, it is recommended that themat is divided into two or more manageable units. For a guide as to dividingsee page 20.
Exterior DrainageWhere an exterior use is planned, the well must be equipped with drainageholes.
Heavy UsageFor areas of heavy usage, extreme heavy duty or where trolleys are to beused, the Top Clean Stabil or Top Clean Object range is built to a heaviergauge and is more suitable to these types of application. See pages 12, 13and 16.
Special ShapesFor special shapes it is recommended that a template be produced in a suit-ably stable material. The red lines indicate the type of shape where additio-nal charges are incurred.
InsideFor an inside installation, any combination of Geggus EMS can be usedbut Top Clean Trend Ribbed Carpet, Top Clean Stabil Ribbed Carpet and Top
Clean Object Ribbed Carpet is recommended.
Transitional AreasAt a transitional or intermediate location Top Clean Light, Top Clean Trendand Top Clean Stabil are suitable in any combination but Ribbed Carpetwith a Scraper Bar or Ribbed Carpet with Cassette Brush are particularlyrecommended.
OutsideFor outside use any of the Top Clean Stabil or Top Clean Trend systems ex-cept those with ribbed carpet can be used but the Grooved Rubber, GroovedRubber with Brush Strip or Grooved Rubber with Cassette Brush provide themost effective dirt and moisture barrier.
Selecting the appropriate mat type
WalkingDirection
INSIDE
OUTSIDE
TRANSITIONALAERA
8/3/2019 stergator picioare
20/2420
Measuring for Specification
GeneralWherever possible Geggus EMS Entrance Mats will be manufactured in onepiece. However, for mats in excess of 3000mm width it is recommended that
the installation is divided into two or more pieces. This keeps the weight ofany one mat assembly within reasonable limits with regard to moving or rol-ling up for cleaning purposes (See page 21).
Remember to specify whether the matting is to be used in an exterior orinterior location.
If required, a fitting service is available. Please ask for details.
Measuring
Ensure that you clearly identify:
1. The aluprofile measurement (side to side or at right angles to thewalking direction).
2. The walking direction measurement (the direction of the traffic flow).
3. Whether the dimensions are for the external measurement of themat or external measurement of the frame.
For complete mat and frame assemblyPlease supply the overall external measurements.
For supply of matting to fit an existing well or framePlease supply the frame inside measurement.
For surface mountingPlease supply the required mat size.
For surface mounting with rampsPlease supply the overall outsidemeasurements.
Top Clean Light and17mm Top Clean Trend only.
For special shapesPlease supply a template in a dimensionally stable material such as PVC at athickness of 22 microns or similar. Take care to identify the upper surface. If
you have any problem specifying a special shape we will be delighted to help.
Dividing for larger Installations.
Geggus EMS Mats are connected with these special joining components
Dividing a large mat should be carried out in such a way as to avoid the breakoccurring where maximum traffic takes place. Consult the diagram for opti-mum ways of dividing a mat installation. If in any doubt, we will be deligh-ted to help.
RIGHT
WRONG
WRONG
RIGHT
WalkingDirection
Length of Aluprofile
8/3/2019 stergator picioare
21/2421
Like any other floor covering subject to heavy use, Geggus EMS EntranceMatting Systems benefit from a regular cleaning regime. The foot borne dirtwill have fallen between the treads into the well. How much dirt collects ob-
viously dictates the frequency of cleaning.In most locations, however, we would re-commend cleaning once a week.
The cleaning of accumulated dirt from themat well is made so much simpler by thefacility to roll up the mat while using abrush or vacuum cleaner to remove the dirt.
It is important to ensure that dirt does not become lodged under the alumi-nium sections as this would stop the mat from lying flat in the well.
Under normal circumstances the mat can be cleaned using a vacuum cleanerbut in areas of particularly heavy usage it is recommended that the matting
receive a regular clean usinga high-pressure cleaner. To dothis it will be necessary to re-move the mat to a suitablelocation and stand verticallyfor cleaning.
Insert ReplacementIf an insert becomes inundated with a contaminant such as chewing gum or oil which makes it impossible to clean, individual tread inserts can be replacedas shown here. However it must be stressed that this should only be considered for one or two treads as replacement of more than that is impractical. Newtread inserts are available by calling us and quoting the style of matting and the colour of the insert.
Strip out the damaged tread removing the oldadhesive with a suitable solvent.
Remove the backing material from the adhesiveside of the new tread and place carefully into
position.
Finish by firmly setting the new insert into placeusing a rubber hammer. Trim off any excess mate-
rial to length of aluprofile.
Cleaning and Maintance
8/3/2019 stergator picioare
22/2422
I Material: UV resistant polypropylene ribbed carpet. Base of mat is of solid rubberfor anti slip and if necessary to glue it on the ground
I Height: ca. 10 mm
I Colours: anthracite, light grey
I Dimensions: Available in any given dimensions or rolls (24,2 m x 2,0 m)
I Usages: Recommended for interior light commercial and residential areas. Beingonly 10 mm high, Enter requires only a shallow well and can even besurface mounted in applications where a fitting well is impractical orundesirable.
Ramped Edge one-sided(the ramp is connected withthe mat)
Ramped Edge double-sided(the ramp is connected withthe mat)
Ramped Edge all sides(Note: the ramp is NOT connectedwith the mat. The ramp can besecured to the floor.)
UsageRecommended for interior light commercial and residentialareas. Can be used for surface mounting in applicationswhere a fitting well is impractical or undesirable.
SpecificationI Warp resistant grooved aluminium profiles
I Height: 10 mm or 17 mm forTop Clean Trend 10 mm and 17 mm
I Profiles can be supplied powder coated to anyRAL colour
Enter Solid Ribbed Carpet
Ramped Edge Frame
Accessories
8/3/2019 stergator picioare
23/2423
Product type:
Profil spacing: 4 mm 6 mm 8 mm
Insert type:
Insert colour:
Frame required: yes no
Type of frame: aluminium brass stainless steel
External dimension of frame:
Internal dimension of frame:
Exact size of mat:
Production as special scale drawing or template:
Sketch of mat:
Length of aluprofiles: cm
Walking direction: cm
Whenever possible entrance matting systems will be produced in one piece. Size above the dimensions and weight, (maximum width of aluprofiles: 300 cm,maximum weights: 60 kg) become too heavy to handle by installers, so divisons are made prior to manufacture advice of the divisions is sent before manufac-ture for on site assembly details.
Company:
Name:
Adress:
Zip code: Town:
Phone: Fax:
E-Mail:
Date/Sign:
Fax Sheet
WalkingDirection
Length of Aluprofile
Order Inquiry
8/3/2019 stergator picioare
24/24
En t r a n c e Ma t t i n g S y s t e m s
Recommended