View
218
Download
5
Category
Preview:
Citation preview
Page 1 of 15
TENDER DOCUMENT
STATE BANK OF INDIA
Administrative Office Zone –I
Bull Temple Road
Bangalore-19
Name of Work: ‘’ ELECTRICAL WORKS FOR NEWLY PROPOSED S.B.I.RACPC AT YALAHANKA NEW TOWN AT
PRESTIGE TOWER, OUTER RING ROAD YALAHANAKA BANAGLORE ‘’
LAST DATE OF SUBMISSION:
ON OR BEFORE 03.00 PM 10.07.2017
LAST DATE OPENING:
10.07.2017 At 03.30 PM
Chief Manager [GB]
Page 2 of 15
TENDER FORM
The,
Chief Manager [GB]
State Bank of India
Administrative Office, Zone –I
Bangalore-4
Dear Sir,
1. Having examined the tender documents contained thereby relating to the words specified in. The
memorandum herein after set out and having visited the examined the source of works specified in the said
memorandum and having acquired the requisite information relating thereto affecting the tender. I / We
hereby offer to execute the works specified in the said memorandum at the rates mentioned in the bill of
quantities hereto and in accordance with all respects of specifications, and instructions in writing referred to
in the tender notice, General Conditions of contract, Schedule of quantities in all other respects accordance
with such conditions so far as they may be applicable.
MEMORANDUM
2. Date of commencement : within 2 days from the date of work order or
Letter of intent
3. Period of completion : 20 days from the date of issue of work order
4. Defects liability period : 06 months from the date of virtual
Completion & submission/payment
of final bill
5. Liquidated damages [penalty] : ½% per week subject to max of 5%
6. Contractors before quoting should compulsorily make a site visit and understand the work to be
done
7.Should the tender be accepted, I/ we hereby agree to abide and fulfill the terms and provisions of the said
conditions of contract.
Page 3 of 15
NOTICE INVITING TENDER
1. Sealed item rate tender for ‘’ ELECTRICAL WORKS FOR NEWLY PROPOSED S.B.I.RACPC AT
YALAHANKA NEW TOWN AT PRESTIGE TOWER , OUTER RING ROAD YALAHANAKA BANAGLORE ‘’
2. Tenderer is advised to go through all the documents in connection with this contract carefully.
3. Tenderer shall deposit the sealed tender in the Office of The Chief Manger [GB] State Bank Of India
Administrative Office Zone –I Bull Temple Road Bangalore - 4 Tenderer shall deposit the sealed envelopes
separately containing the following
PART ‘B’
1. Schedule of quantities duly filled in figures and words and signed on each page with seal and date tenders
will be received up to 2P.M. On 05.06.2017 and shall be opened on the same day @ 3.30PM at the
Administrative office Zone -I STATE BANK OF INDIA, Bangalore-4. Tenders received after fixed time
and date due to postal delay will not be considered.
2. Earnest Money Deposit (EMD) Rs. 17,500/- (Rupees Seventeen Thousand Five Hundred only) as Demand draft drawn in favour of State Bank of India, payable at Bangaluru.
3. Tenders not properly filled, mutilated with incorrect calculations or generally not complying with
conditions will be rejected.
4. Tenderer should quote their rates both in figures and in words. The Schedule of quantities must be fully
priced with rates quoted for both unit rate specification and the total of each page along with carried
over figures of previous page shall be given in ink and signed by the Tenderer. No blank space shall be
left. Figures in words shall be deemed to be final figures, in case of cuttings or over writings. However, it
is essential that the contractor should ensure that he has signed on all pages of the tender document.
5. PERIOD OF VALIDITY
The tender shall remain valid for acceptance of a period of 90 days from the date of submission of tenders.
If any Tenderer with draw his tender before the said period or make any modifications in the terms and
conditions of the tender, then the employer has the liberty to disqualify the Tenderer
Every Tenderer is expected to inspect the site of the proposed work and acquaint him with site conditions,
approaches, availability of the raw materials, geological and weather conditions etc. before quoting his rates.
He must go through all the specifications, and other tender documents. Any further clarifications in the
documents can be had from this Office at the above mentioned address.
Page 4 of 15
6. QUANTUM OF WORK
A schedule of probable quantities in respect of each work and specifications accompany these conditions.
The schedule of probable quantities is liable to alterations, omissions or additions at the discretion of the
Bank. The schedule of the probable quantities may vary considerably on the higher or lower side.
7. ALL INCLUSIVE RATES
Quoted Rate shall include the cost of transportation of material to the site, all taxes such as sales tax, excise
duty, octroi, works contract and any other statutory levy, (GST, if any)etc. and fixing or placing in position
for which the item of work is intended to be operated. The rates quoted by the contractor shall be firm
throughout the contract period and there shall be no upward revision of the rates. It should be clearly
understood that any claims for extra ,sales tax, excise duty, octroi, works contract and any other statutory
levy (GST, if any), etc shall not be entertained in any case whatsoever once tenders are opened.
11. INTERPRETING SPECIFICATIONS
In interpreting specifications, the following order of decreasing importance shall be followed:
1. Schedule of quantities with detail specifications
2. Unit rate specifications and technical specifications
3. General Specifications
Matters not covered by the specifications given in the contract, as a whole shall be covered by the relevant
Indian standard codes. If such a Codes on a particular subject have not been framed, the decision of the Bank
Engineer shall be final.
12. The acceptance of the tender shall rest with the authorized representative of the employer, who does not
bind himself to accept the lowest tender and reserves to himself the authority to reject any or all the tenders
received without assigning any reasons, whatsoever.
13. The work shall be carried out under the direction and supervision of the Bank Engineer or their
representative at site. On acceptance of the tender, the contractor shall intimate the name of his accredited
representative who would be supervising the work and would be responsible for taking instructions for carrying
out the work.
Page 5 of 15
14. Bank Engineer decision with regard to the quality of material and workmanship will be final and binding,
any material rejected by the Bank Engineer shall be immediately removed from the site by the
Contractor.
15. SUB-LETTING
No part of the contract shall be sublet without the written permission of the employer nor shall transfers be
made by the power of attorney authorizing others to carry out the work or receive payment on behalf of the
renderer.
16. DEFECTS LIABILITY PERIOD
Any defect developed within the defect liability period of 6 months will have to be rectified by the agency at
their own cost and in case and the defects are not rectified by the contractor, employer or their
representative shall get the work done at the risk and cost of the contractor.
17. CERTIFICATE OF VIRTUAL COMPLETION
The work shall not be considered as completed until the Bank has issued in writing “certificate of virtual
completion” stating that the work has been completed and defects liability period shall commence from such
certified date of virtual completion.
18. DELAYS IN COMMENCEMENT
The contractor shall not be entitled to any compensation for any loss suffered by him on account of delays in
commencing or executing the work, whatever the cause for such delays may be including delays in procuring
government controlled or other materials.
19. The contractor should inspect the source of material, their quality, quantity, and availability. The
material must strictly comply with the relevant specifications attached.
20. PERIOD OF COMPLETION
Time is deemed to be the essence of the contract; the completion period shall be twenty days. The contractor
shall draw a detailed schedule of program in the form of BAR/PERT CHART of whole work, within two weeks of
the award of the work and submit to the Bank for its approval.
21. CONTRACTORS STORE
Suitable area near the site of work shall be allowed to the contractor free of cost for storing his tools and
plants, materials and for his site office. The contractor shall remove all temporary constructions constructed
by him at site for the purpose of completing the work after the work is over
Page 6 of 15
22. MEASUREMENT AND BILLING
Whenever mode of measurement is specified, measurement will be taken at site as per the latest IS code of
practice for measurement.
The contractor or his representative shall accompany the employer or their representative in taking/checking
Measurements. All necessary tapes and shall be supplied by the Contractor. The Contractor shall then
present his bill based on the agreed and recorded measurements and if the contractor fails to accompany the
employer for measurement, then he shall be bound by the Measurement s taken by the Bank Engineer
Contractor shall raise first and final bill or for minimum payment of a Running Bill
Payment towards all interim bills will be made by the employer within the time limit specified in the summary,
form of the tender
Period of final measurement shall be 30 days from the date of completion of the project.
23. WATER AND ELECTRICITY
The employer will make water supply and electricity to the site at one convenient point available. The
contractor should make his own arrangements in case of supplementary supply points are required for both
water and electricity. The consumption charges shall be borne by the contractor.
24. INSURANCE
The successful contractor shall take out the contractor’s all risk insurance policy, jointly in the name of the
employer and the contractor and the original policy shall be deposited with the employer. The insurance policy
shall be obtained within 14 days of date of commencement of the work.
25. STATUTORY REGULATION
The whole work is to be complied with as per the requirements and by laws of relevant statutory authorities,
including contract labor (Regulation and Abolition) act 1970.
I/ We hereby declare that I/We read and understood the above instructions and the terms and conditions
mentioned above are binding on me/us.
PLACE:
DATE: SIGNATURE WITH SEAL
Page 7 of 15
LIST OF APPROVED MAKES TO BE USED
Sl. No Item Make
1 Panels/DB ABB/LEGRAND/HAVELLS/HAGER/SHNEIDER
2 CHANGE OVER SWITCH ABB/HAVELLS/C&S
3 MCCB ABB/HAVELLS/L&T/SIEMENS
4 MCB/ELCB/RCCB LEGRAND/SIEMENS/HAGER/GE
5 MODULAR
SWITCHES/SOCKETS/TELEPHONE
SOCKETS
LEGRAND-Myrius/MK Blenze/HAVELLS-
Cabtree
6 ELECTRONIC FAN REGULATORS LEGRAND/PHILIPS/HAVELLS
7 Multi-strands FRLS COPPER
WIRE
FINOLEX/POLYCAB/HAVELLS
8 Telephone cables & TV Cables DELTON/FINOLEX
9 LT CABLE FINOLEX/POLYCAB/KEI
10 LED FITTINGS WIPRO/HAVELLS/CG/GE/PHILIPS
11 FAN HAVELLS/CG/ALMONARD
12 PVC CONDUITS VIP/NELCO/UNIVERSAL/GLOSTER
13 CAT-6 UTP CABLE, PACTCH
PANEL, IOs, FACE PLATE,DATA
NETWORK RACK
D-LINK
14 PA SYSTEM Bosch/Philips/TOA/Studio Master
15 FLEXIBLE CONDUIT Reputed make ( GI bind Industrial type
only)
Page 8 of 15
SATE BANK OF INDIA
ADMINISTARTIVE OFFICE-ZONE –I
BANGALORE
NAME OF WORK: PROVIDING ELECTRICAL WORKS FOR NEWLY PROPOSED S.B.I RACPC BRANCH AT YALAHANKA
NEW TOWN, BENGALURU
TENDER SHEDULE :
Sl No Items of work Unit Qty Rate Amount
1.a Providing and laying Armored cable of approved make Havells
/Finolex / with required clamps wood gatta Armored cable of
size 4 core x 35 Sqmm of approved make Havell’s / Polycab /
Gloster etc complete this rate includes cost of all materials,
taxes, lead & lift to the place of work. This rate includes cost of
all materials, labor taxes, lead & lift to the place of work.
Rmt 90
Rupees in words
b Providing and laying Armored cable of approved make Havells
/Finolex / with required clamps wood gatta Armored copper
cable of size 4 core x 16 Sqmm of approved make Havell’s /
Polycab / Gloster etc complete this rate includes cost of all
materials, taxes, lead & lift to the place of work. This rate
includes cost of all materials, labor taxes, lead & lift to the place
of work.
Rmt 90
Rupees in words
2 P/L of with required clamps wood gatta Armored cable 3.5x50
sq. mm of approved make Havell’s complete etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work.
No 4
Rupees in words
3 Main VTPN DB
Set
1
125 Amps MCCB – 1 No
63 Amps TP – 12 No
Etc complete this rate includes cost of all materials, taxes, lead
& lift, labor to the place of work.
Rupees in words
Page 9 of 15
4 Providing and fixing 4 –way distribution boards of make legrand
IP 43 Ik 09 with metal door to accommodate the following63
Amps TPN – 1 No 32 Amps TPN – 1 No 10 Amps SP – 8 No 16 SP
MCB 8 No The DB shall be fixed in the wall duly cutting and
plastered the surface according to the spirit level finishing Etc
complete this rate includes cost of all materials, taxes, lead &
lift, labor to the place of work.
Set 2
Rupees in words
5 Providing and fixing 4 –way distribution boards of make legrand
IP 43 Ik 09 with metal door to accommodate the following
63Amps DP MCB – 4 No .The DB shall be fixed in the wall duly
cutting and plastered the surface according to the spirit level
finishing Etc complete this rate includes cost of all materials,
taxes, lead & lift, labor to the place of work.
Set 2
Rupees in words
6 Providing and fixing 8 –way distribution boards of make legrand
IP 43 Ik 09 with metal door to accommodate the following 40
Amps DP MCB – 1 No and 10 Amp SP MCB 6 No. The DB shall be
fixed in the wall duly cutting and plastered the surface
according to the spirit level finishing Etc complete this rate
includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Set
3
Rupees in words
7 a
Providing electrical wiring by using fire retardant PVC pipe of
required dia of 32 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 4 x 6 Sqmm 1 x 4 sq.
mm multi strand copper conductor of 1100 volts grade of make
polycab/ Havell’s/Anchor etc complete etc complete this rate
includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt
90
Rupees in words
b Providing electrical wiring by using fire retardant PVC pipe of
required dia of 25 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 2 x 6 Sqmm 1 x 4 sq.
mm multi strand copper conductor of 1100 volts grade of make
polycab/ Havell’s/Anchor etc complete etc complete this rate
includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt
120
Rupees in words
Page 10 of 15
c Providing electrical wiring of 4 x 6 Sqmm +1x4 Sqmm by using
fire retardant PVC pipe conduit pipe of required dia of 25 mm
fixing the pipe with required clamps & with its all accessories to
run the wiring multi strand copper conductor of 1100 volts grade
of make polycab/ Havell’s/Anchor etc complete etc complete
this rate includes cost of all materials, taxes, lead & lift, labor
to the place of work.
Rmt
120
Rupees in words
d Providing electrical wiring by using fire retardant PVC pipe of
required dia of 25 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 2 x 6 Sqmm, 1 x 4
Sqmm multi strand copper conductor of 1100 volts grade of make
polycab/ Havell’s/Anchor etc complete etc complete this rate
includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt
90
Rupees in words
e Providing electrical wiring by using fire retardant PVC pipe of
required dia of 25 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 2 x 2.5 Sqmm, 1 x 1.5
Sqmm multi strand copper conductor of 1100 volts grade of make
polycab/ Havell’s/Anchor etc complete etc complete this rate
includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt
800
Rupees in words
f Providing electrical wiring by using fire retardant PVC pipe of
required dia of 20 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 2 x 2.5 Sqmm, 1 x 1.5
Sqmm multi strand copper conductor of 1100 volts grade of make
polycab/ Havell’s/Anchor etc complete. Etc complete this rate
includes cost of all materials; Taxes lead & lift labor to the place
of work.
Rmt
350
Rupees in words
g Providing electrical wiring by using fire retardant PVC pipe of
required dia of 25 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 2 x 4 Sqmm 1 x 2.5
sq. mm multi strand copper conductor of 1100 volts grade of
make polycab/ Havell’s/Anchor etc complete etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt
250
Page 11 of 15
h Providing electrical wiring by using fire retardant PVC pipe of
required dia of 25 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 3 x 4 Sqmm 1 x 2.5
sq. mm multi strand copper conductor of 1100 volts grade of
make polycab/ Havell’s/Anchor etc complete etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt
200
Rupees in words
i Providing electrical wiring by using fire retardant PVC pipe of
required dia of 20 mm fixing the pipe with required clamps &
with its all accessories to run the wiring of 2 x 2.5 Sqmm, 1 x 1.5
Sqmm multi strand copper conductor of 1100 volts grade of make
polycab/ Havell’s/Anchor etc (Lighting DB to switch box) etc
complete this rate includes cost of all materials, taxes, lead &
lift, labor to the place of work.
Rmt
250
Rupees in words
8 Providing electrical wiring by using 20 mm dia PVC / Mild steel
conduit pipes with its all accessories like bends saddles elbows
junction boxes etc 3 x 1.5 Sqmm insulated multi strand copper
wire of volt 1100 concealed where ever necessary etc compete.
Etc complete this rate includes cost of all materials, taxes, lead
& lift, labor to the place of work.
a] Single light point controlled by 6 Amps modular switch of
Approved make
No 50
b] Two light controlled by 6 Amps switch No 30
c] Three light controlled by 6 Amps switch No 30
d] Secondary light controlled by 6 Amps switch No 30
e] Ceiling fan point controlled by Electronic regulator No 15
f] Providing wall mounted Fan Point No 20
Rupees in words
a S/F of 1 No of 16 Amps Switch, Separate Indicator, 3 No of 6
Amps socket with surface box & front plate of Anchor Roma
make etc complete this rate includes cost of all materials, taxes,
lead & lift, labor to the place of work.
No
110
Rupees in words
b Providing 6 Amps switch socket fixed in common switchboard for
dependent plug point etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work.
No
15
Rupees in words
c S/F of 2 No of 6 Amps Switch & 2 No of 6 Amps socket with Co-
Box & front plate. Etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work.
No
55
Page 12 of 15
Rupees in words
d S/F of 16 Amps Switch Socket complete costs of all materials
etc complete this rate includes cost of all materials, taxes, lead
& lift, labor to the place of work.
No
5
Rupees in words
9 Supply & Installation of lighting fixtures as per the details given
below including necessary hardware such as clamps, nuts, bolts,
nails, screws and suspension chains as required for fixing the
fixtures in position as directed by architect / Consultant.
a 2X2, 36W LED Luminary with recessed mounted, full diffuser,
High efficiency and uniform consistent lighting- Make-WIPRO/HAVELLS/CG/GE/PHILIPS
No 60
Rupees in words
b 15W, LED Recessed Mounting(Round type) Down Light fittings
with High efficiency and uniform consistent lighting, Make- WIPRO/HAVELLS/CG/GE/PHILIPS
No 60
Rupees in words
c 1200mm (48") sweep High Speed 230V, A.C 50 Hz. Ceiling fan
with 3 Blades and double ball bearings with suitable down rod
without regulator including all standard accessories etc
complete.
No 10
Rupees in words
d 1x28W T5 LED Light fitting
No 17
Rupees in words
e Supply of 400mm sweep Wall mounted fan 230V,A.C. 50Hz wall
mounted fan with 3 blades with built in regulator, oscillation and
double ball bearings with all standard accessories etc complete
No 20
Rupees in words
f Supply of 225mm (12") sweep 230V, A.C 50 Hz. Drifit air
Exhaust fan with 3 Blades and double ball bearings with all
standard accessories etc complete.
No 2
Rupees in words
g cove lights Rmt 300
Rupees in words
10 Providing Anchor Bolt etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work.
No 11
Rupees in words
Page 13 of 15
11 Providing copper plate Earthing excavating up to a depth of 2.5
Mtr then laid copper plate of size 600mm x 600mm x 6 mm
electrode connected with brass nut & bolt including with cost of
char coal, salt & murram, filled in layers watering constructing
brick work chamber of clear dimension 50x50x60mt deep shall
fixed with funnel arrangements with GI pipe from bottom to top
etc complete this rate includes cost of all materials, taxes, lead
& lift, labor to the place of work.
No
2
Rupees in words
12 Providing copper pipe Earthing excavating up to a connected with
brass nut & bolt including with cost of char coal, salt & murram,
filled in layers watering constructing brick work chamber of
clear dimension 50x50x60mt deep shall fixed with funnel
arrangements with GI pipe from bottom to top etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work.
No 1
Rupees in words
13 Providing and fixing 8 SWG Copper Wire in required PVC conduit
pipe etc complete this rate includes cost of all materials, taxes,
lead & lift, labor to the place of work.
Rmt 60
Rupees in words
14 Providing and fixing Copper earth bus bar set etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Set 2
Rupees in words
15.a Supplying & wiring 2 pair telephone wire of size 0.5 mm tinned
copper p.v.c insulated wire drawn through 20 mm dia p.v.c pipe
with ISI mark with necessary surface / concealed with clamps
at regular intervals fixed. (Havell’s/Anchor) etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt
450
Rupees in words
b Providing and fixing of Epabx System) 48 port of make Matrix
with its warranty card etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work
Set 1
Rupees in words
c Supplying & wiring 20 pair telephone wire of size 0.5 mm tinned
copper p.v.c insulated wire drawn through 20 mm dia p.v.c pipe
with ISI mark with necessary surface / concealed with clamps
at regular intervals fixed. (Havell’s/Anchor) etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work.
Rmt 70
Rupees in words
Page 14 of 15
d Providing and installing Telephone Instrument of approved make
in good condition etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work.
No 55
Rupees in words
e Providing and fixing 10 pair Crown Junction Box etc complete
this rate includes cost of all materials, taxes, lead & lift, labor
to the place of work.
No 2
Rupees in words
f Providing and fixing 20 pair Crown Junction Box etc complete
this rate includes cost of all materials, taxes, lead & lift, labor
to the place of work.
No 2
Rupees in words
g Supplying & Install ting of Modular type RJ 11 Telephone
Sockets mounted on a switch plate & fixed on a p.v.c box
(modular type Anchor Roma / Crabtree) etc complete this rate
includes cost of all materials, taxes, lead & lift, labor to the
place of work.
No 55
Rupees in words
15.a Providing and laying Cat – 6 UTP cable) Digi link make etc
complete this rate includes cost of all materials, taxes, lead &
lift, labor to the place of work
Rmt
2500
Rupees in words
b Supplying & fixing 2.10 Mtr UTP E CAT mounting patch of
approved make Digi link Cord etc complete this rate includes
cost of all materials, taxes, lead & lift, labor to the place of
work
No 55
Rupees in words
c Supplying & Fixing Patch Cord 1 Mtr UTP E CAT of approved
make Digi –Link etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work
No 55
Rupees in words
d Supplying & fixing single box type information out let CAT6 with
surface mounting box. Etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work
No 55
Rupees in words
e Supplying & fixing double box type information out let CAT6
with surface mounting box. Etc complete this rate includes cost
of all materials, taxes, lead & lift, labor to the place of work
No 55
Rupees in words
Page 15 of 15
f Supplying & fixing 48 Port E CAT 6 Patch Panel of D - link make.
Etc complete this rate includes cost of all materials, taxes, lead
& lift, labor to the place of work
No 2
Rupees in words
g Supplying & fixing 48 Port E CAT 6 Ethernet switch 10/100
mbps managed switch. Etc complete this rate includes cost of all
materials, taxes, lead & lift, labor to the place of work
No 2
Rupees in words
h Supplying & Fixing 24 U, Standalone type rack for patch panel &
Switch. Etc complete this rate includes cost of all materials,
taxes, lead & lift, labor to the place of work
No 1
Rupees in words
i Supplying & Fixing RJ 45 connectors (in pair) Etc complete this
rate includes cost of all materials, taxes, lead & lift, labor to the
place of work
No 120
Rupees in words
16 Supplying and installing of three phase change over switch of
capacity 125 Amps TPN 1 –No L/T, HAVELLS/Indo Asian fixed in
a box factory made Havells / IndoAsian / Hager, Etc complete
this rate includes cost of all material labor taxes lead and lift to
the place of work.
No 1
Rupees in words
17.a 120 watt mixer amplifier with 2 mic inputs, USB Media player
Bosch/TOA/Studio Master
No 1
Rupees in words
b Supply and Fixing of 9W recessed type speakers on ceiling No 12
Rupees in words
c 46 Stands twin twisted Copper Wire drawn Suitable 1.5mm thick
PVC Conduits with required all materials
Rmt 200
Rupees in words
Total Rs.
Total-Rupees in words
Contractor Seal with Signature
Recommended