View
218
Download
0
Category
Tags:
Preview:
Citation preview
VMS Software Reviews
• Installing new analog cameras onto the system• Installing new IP cameras onto the system• Set cameras’ frame rate, resolution, and types
of recordings (motion, sensor, continuous, and VAR)
• Configuring cameras for Intelli-Zone, Intelli-Guard, and Video Analytics features
• Applying cameras’ features and function• Administrating SRX-Pro
Hardware
• Where do I enter the PTZ ID?
• What is “A/P”?
• How many control inputs and outputs I can have on an IP system?
• What is “Linked Channel” and “Linked Control”?
• What is “Spot monitor(s) follow main screen”?
Recording and Displaying Setup
• What are the type of resolutions are available for analog cameras?
• As I increase the frame rate, will I loose my resolution?
• What are the file sizes for different frame rates and resolutions?
• How can I use this to calculate my hard drive storage requirements?
Motion Setup
• What is the significance of “Enable Full Screen” feature?
• What happens if the motion area is clear?
• What is the purpose of the “Dwell” time?
• How many motion areas can I draw for one camera?
Schedule Setup
• What are the 4 types of available schedule setup?
• How many channels of VAR can I have on a basic unit?
• What is the maximum number of VAR channels I can have?
User Management Setup
• How can I hide a camera from a user?
• How can I disable a setup menu?
• What administrative rights should I provide to my end-user?
• How many user accounts can I create?
Server Info
• Can I change the IP address for the DVMS Server from this setup tab?
• What is the difference between SRX-Pro Sever IP address and public IP address?
• What steps do I need to follow to connect to SRX-Pro Server using a public IP address or dynamic IP address?
• Can Server ID be something other than a number?
• Why do I need to have Server ID?
System Setup
• Why do I need to reboot my SRX-Pro Server?
• What types of the reboot are available?
• What is “NTP Server List”?
• What is “Activate Sensor Backup” feature used for?
• When would I use Server Settings Export and Import?
IntelliGuard Setup
• What is the purpose of IntelliGuard?
• What application is it best to be used for?
• How do I activate sound?
• Where do I record sound?
Communication Setup
• What are the important ports that need to be configured?
• What is the “CMS Settings” section for?
Text Overlay Setup
• What is text overlay?
• How many text overlay areas (boxes) can I draw?
• Can I have two cash registers on two same cameras?
• What is “Intelligent Text Overlay”?
IntelliZone
• What type of application would I use IntelliZone?
• For IntelliZone to work properly, what type of cameras do I need?
• Where do I set preset for my PTZ?
VideoLogix Setup
• VideoLogix provides the following:– Enters Area, Crossed Line, Idles in Area, Missing
from Area, Moves in Direction type alarm• VisionCount
– DriveThrough, Register, Region and DoorCount• For Instruction on configuring VideoLogix please
refer SRX-Pro Manual “SRX-Pro Server and Remote User Manual, v.2.3.pdf” VideoLogix - pages 106-115/VisionCount - pages 116-118
• Maximum number of Video Analytics channels supported by the SRX-Pro Server is 16
IP camera setup
• GiPi – what is it?
• Annexxus Finder – what is it for?
• Same IP Address range – why do I need it?
• What steps I need to follow to configure an IP camera?
IP Camera Setup
• GiPi: Generic IP Interface– Interface between different IP cameras and
SRX-Pro software, iDisplay, and Video Pilot– Each IP camera has its own way of
communication and GiPi allows the communication between the camera and i3 software
– Please refer to “Master Integration List for IP Cameras and Encoders” for a complete list of GiPi-integrated IP cameras
Annexxus Finder
• A software application that allows the technician to find all of i³ IP camera and UIO8 on a network
• Annexxus Finder will also display a limited number of IP cameras from other manufacturers from the GiPi integration list
• Please follow the instruction on “Annexxus_Finder_v.3.0.pdf”
Same IP Address range – why do I need it?
• Changing IP address on the Annexxus Camera needs to have the same range
• The SRX-Pro needs to have same range to communicate
• You can add a second IP address to your network card to make configuring your IP Cameras a little easier under “Advanced TCP/IP setting”
Recommended