Split Screen Divider Installation - Split Scre… · Follow the initial step with a soap and water...

Split Screen Divider Installation

SPLIT SCREEN DIVIDER INSTALLATION

ClubPro.com 800 467 2844

What You Will Need:

Scuff pads (supplied)AcetonePrimer (supplied)GlovesGogglesCleaning clothFoam brush (supplied)Roller (supplied)

VERY IMPORTANT:

You must use acetone only (NO SUBSTITUTES) to clean center canopy surface.

Follow acetone and primer manufacturer’s safety instructions regarding personal protective gear.

Work in a well ventilated area.

Installation Overview:

INSTALL THE CANOPY CHANNELS (x2)*:1. Scuff the installation area 2. Clean the installation area with acetone3. Apply the primer to the area4. Remove the adhesive backing5. Apply channels to the canopy6. Apply pressure with the roller

INSTALL THE DIVIDER:7. Remove the protective paper8. Slide the divider into the channels

INSTALL THE D-RINGS (x5):9. Clean the installation area with acetone10. Apply the primer to the area11. Remove the adhesive backing12. Apply the D-ring to the installation area

FINISH THE INSTALLATION:13. Fasten cords to D-rings (x5)

* After installation let set at least overnight

Install the Canopy Channels

Install the Canopy Channels:

1.Scuff the installa-tion area with Scotch Brite 7747

2.Clean the instal-lation area with acetone and cloth

Follow the acetone manufacturer’s safety instructions regarding personal protective gear. Work in a well ventilated area.

3.Apply primer to the installationarea with brushLet set for a minimum of 5 minutes

Follow the primer manufacturer’s safety instructions regarding personal protective gear. Work in a well ventilated area.

4.Remove adhesive backing from the channels (x2)

5.1Apply channel #1 to the canopy

6.1Apply pressure with the roller

5.2Apply channel #2 to the canopy

6.2Apply pressure with the rollerLet set at a minimum overnight; the manu-facturer suggests 24 hours

Install the Divider

Install the Divider:

7.Remove protec-tive paper from the divider

Install the Divider:

8.Slide the divider into the channels

Install D-Ring #1

Install D-Ring #1:

9.1Clean under the front of the canopy with ace-tone and cloth

Install D-Ring #1:

10.1Apply primer to the installationarea with brushLet set for a minimum of 5 minutes

Install D-Ring #1:

11.1Remove adhesive backing from the D-ring

Install D-Ring #1:

12.1Apply D-ring under the front of the canopyLet set for a minimum of 15 minutes

Install D-Ring #2

Install D-Ring #2:

9.2Clean the top of front body panel with acetone and cloth

Install D-Ring #2:

12.2Apply D-ring to the top of front body panelLet set for a minimum of 15 minutes

Install D-Ring #3

Install D-Ring #3:

9.3Clean the bottom of front console with acetone and cloth

Install D-Ring #3:

12.3Apply D-ring to the bottom of front consoleLet set for a minimum of 15 minutes

Install D-Ring #4

Install D-Ring #4:

9.4Clean the panel under seat back with acetone and cloth

Install D-Ring #4:

12.4Apply D-ring to the panel under seat backLet set for a minimum of 15 minutes

Install D-Ring #5

Lorem ipsum

Install D-Ring #5:

9.5Clean the seat back with ace-tone and cloth

Install D-Ring #5:

12.5Apply D-ring to the seat backLet set for a minimum of 15 minutes

Finish the Installation

Finish the Installation:

13.1Fasten the mini bungee cord to D-ring #1

Cleaning/Disinfecting:

We recommend using a professional vinyl cleaner with no alcohol.

Follow the initial step with a soap and water solution as you would normally clean the golf cart.

Note: The vinyl cannot be cleaned with an alcohol based disinfectant.

Do not store vinyl when wet.

Warranty:

We will guarantee workmanship and material for 1 year (assuming installation and cleaning procedures are followed).

If you have any questions do not hesitate to contact us.

STAY SAFE AND ENJOY!

800 467 2844Info@ClubPro.com

ClubPro.com

AUGUSTA, GA | DEER PARK, NY | LOUISVILLE, KY | SANTIAGO, D.R.

Produced by:RomeoCo.com

EdgeMediaDigital.com

Split Screen Divider Installation - Split Scre… · Follow the initial step with a soap and water...

Documents

Divider PPGB

HVDC Divider - Trench Voltage... · HVDC Divider Compensated voltage divider for HVDC transmission systems Version 03 2012

Comp Carly Scre Refrig 2004

To Provide Compressed Sulla ir Scre w Air Compressor Air

Dough Divider V 700 - africanbakery.comafricanbakery.com/PDFs/V700UK.pdfV 700 1/2 Dough Divider 26.08.2010 Dough Divider V 700 Dough Divider Speciﬁcation Universal dough divider,

SECTION DIVIDER - ENGINE 311DSL - VIPzapchasti...MASSEYMASSEYNN 9 9 NN DIVIDER DIVIDER DIVIDER - - - -EEEL L 1111 ItemItem r rr y yyy n nn Comments Comments ENGINEL 1 0 1 Engine 311DSL

Equal Split Wilkinson Power Divider - Project Presentation

1gerko Divider

Divider Fail

Design, Analysis, and Construction of an Equal Split ... · DESIGN, ANALYSIS, AND CONSTRUCTION OF AN EQUAL SPLIT WILKINSON POWER DIVIDER by Logan J. Berens, B.S. A Thesis submitted

Flexible Divider

Trabon Divider Valves - C&C Industrial Sales (CCIS)divider valve is the first divider valve downstream from the lube pump. A secondary divider valve is any divider valve receiving

Binary Divider

Edinburgh Research Explorer - COnnecting REpositories · against the Terman-Merill revision of the Binet scales (SCRE) [29]. SCRE recorded and archived these scores and made them

Split Screen Divider Installation · 7. Slide the divider into the channels INSTALL THE D-RINGS (x4): 8. Clean the installation area with acetone 9. Apply the primer to the area 10

Yard Divider

Dough Divider B / V 300 - wpbakerygroup.org · B / V 300 1/2 Dough Divider 26.08.2010 Dough Divider B / V 300 Universal Dough Divider Speciﬁcation This dough divider is suitable

Tab Divider

Alerts Forms Navbar Utility: Display - Creative Alive · 2018. 3. 14. · accordion Dropdowns dropdown dropdown (split) dropup dropup (split) dropright dropleft dropdown-header dropdown-divider

Split Screen Divider Installation · 2020-06-01 · 7. Slide the divider into the channels INSTALL THE D-RINGS (x3): 8. Clean the installation area with acetone 9. Apply the primer