View
5
Download
0
Category
Preview:
Citation preview
ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTXABSCO INDUSTRIES PAGE 1 16/07/19
Space Saver ShedAssembly InstructionsModel: 23081SK-PTX
CONCRETE SLAB
PAGE 1ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedAssembly InstructionsModel: 23081S
We thank you for choosing an Australian Made Shed. For further assistance pleasevisit our detailed instructional video library at http://www.absco.com.au/videos.php
At ABSCO Industries we are always looking to be number ONE, so please let usknow what you think of our instructions. Feedback makes us better.feedback@absco.com.au.
10mm (0.39")50mm (1.97")
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHEDWATER RUN OFF IS KEPT
2360mm
(92.91")880mm(34.65")
FRONT BASELENGTH:2.26m (88.98")
SIDE BASELENGTH:0.75m (29.53")
FRONT WALLHEIGHT:1.95m (76.77")
REAR WALLHEIGHT:2.08m (81.89")
WHEN LAYING YOUR CONCRETE SLAB,CHAMFER THE 50mm (1.97") EDGESDOWNWARDS BY 10mm (0.39").
50mm(1.97")
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 2 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
Premier Garden Shed - Model: J30232G
PAGE 2ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
The site for the shed must be level.
It is recommended that the shed be set on a 4" concrete slab andanchored down appropriately (refer last page for details).
Anchor sets are not supplied as standard items with this product.
Before commencing any assembly, read through these instructions indetail to gain a thorough understanding of assembly methods andassociated details.
Unpack the carton and carefully identify and check off all the partsagainst the parts described and illustrated on pages three and four.
Some parts may have sharp edges. It is advisable to wear gloves whenhandling these items and safety glasses if drilling holes. Sensible shoesare highly recommended.
Do not erect your shed in windy conditions, ensure that the shed issecurely anchored to a solid foundation immediately after construction iscompleted.
It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
SITE PREPARATION
Normal 1/8", 11/64"
Masonry 25/64"Normal 25/64"
OPTIONAL
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 3 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
PAGE 3ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
2
COMPONENTDESCRIPTION
PARTNo. CHECK COMPONENT
DESCRIPTIONPART
No. CHECKQTY QTY
43B
1
1
1
3
2
1
1
43C
X4L
X4R
43D
STEEL SHEET1725mm (67.91")(67.91") X 773mm
(30.43") B
1
1
1
2
2
2
1
61BCHANNELL = 786mm (30.95")
CHANNELL = 773mm (30.43")
81J
32A
54ACHANNELL = 2253mm (88.70")
54CCHANNELL = 2253mm (88.70")
54BCHANNELL = 2253mm (88.70")
81DCHANNELL = 2253mm (88.70")
81CCHANNELL = 2253mm (88.70")
79BCHANNELL = 788mm (31.03")
STEEL SHEET1915mm (75.39")X 773mm (30.43")
STEEL SHEET1915mm (75.39")X 773mm (30.43")
STEEL SHEET1915mm (75.39")X 773mm (30.43")
STEEL SHEET1915mm (75.39")
X 773mm (30.43")
STEEL SHEET865mm (34.05") X773mm (30.43")
STEEL SHEET1785mm (70.27")X 731mm (28.78")
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 4 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 4ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
COMPONENTDESCRIPTION
PARTNo. CHECK COMPONENT
DESCRIPTIONPART
No. CHECKQTY QTY
CONTENTS OF FITTINGS PACKET
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS
1
1
2
89A1
1
2
2
91AJAMB L= 1120mm (44.09")
88B
58ACHANNEL WITH HINGESL = 1725mm (67.91")
58BCHANNELL = 1725mm (67.91")
58CCHANNELL = 773mm (30.43")
89B1
90BJAMB L= 788mm (31.03")
64mm (0.16") CSK
SCREW & NUT SECUREHINGES TO DOOR
(ALTERNATE METHOD)
220 SELF TAPPINGSCREWS 1
1
DOORPADBOLT
1DOOR
PADBOLTHASP 6 3mm (0.12") POP RIVETS
SECURE HINGES TO DOOR
1 ASSEMBLYINSTRUCTIONS 12A1
DOORSTRAP
L: 165mm(6.50")
22A
JAMB L= 1785mm (70.27")
JAMB L= 1785mm (70.27")
LIP TRIM L= 865mm(34.05")
RIVET GUN
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 5 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
VIE
W O
F R
OO
F C
OM
PO
NE
NT
S
PA
GE
5A
BSC
O IN
DU
STR
IES
ASS
EMB
LY IN
STR
UC
TIO
N -
MO
DEL
: 230
81S
14/1
2/10
USA
CA
NA
DA
Abs
co S
pace
Sav
er S
hed
Mod
el: 2
3081
S
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 6 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
VIE
W O
F W
ALL
CO
MP
ON
EN
TS
AB
SCO
IND
UST
RIE
S
A
SSEM
BLY
INST
RU
CTI
ON
- M
OD
EL: 2
3081
S 14
/12/
10 U
SA C
AN
AD
A
Abs
co S
pace
Sav
er S
hed
Mod
el: 2
3081
S
PA
GE
6
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 7 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 7ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snap-tite assembly system locks most perimeter channels to all roof and wallsheets without the need for tools and fasteners.
To pre-assemble the four wall panelsand two roof panels, the perimeterchannels are secured to the top andbottom of each panel using thesnaptite system, as detailed on thefollowing pages wherever you seethe symbol.
Position sheets on timbers,trestles or partly over edge ofconcrete slab.
Each perimeter channel must finish flushwith the edges of the sheets. the snap-titesystem allows adjustment for thisprocess by simply tapping the channelalong the sheets until each end is neatlyflush.
Join components together with one screw at thislocation only, as some channel sections have extraholes that are not required for this model of gardenshed
Do not join components together at this location yet,as the screw may obstruct further assembly of othercomponents
4mm (0.16") NUT & BOLT SET
3mm (0.12") POP RIVETS
PUSH
PUSH
HIG
H S
IDE
HIG
H S
IDE
PUSH HIG
H S
IDE
HIG
H S
IDE
After joining sheets together,position channel over one end of thesheets, gently tapping it over thesnaptite lugs, working along thesheets to the other end.
HIGH SIDE
SNAPT TEi
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 8 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 8ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
DOOR PANEL ASSEMBLYDOOR PANEL ASSEMBLY
58C
58C
58A
B
B
58B
12A
20mm (0.79")FLANGE
15mm (0.59")FLANGE
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 9 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
REAR PANEL ASSEMBLY
PAGE 9ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
43B
43C
43B
54B
81D
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 10 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 10ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
SIDE PANEL ASSEMBLY
(TWO REQUIRED)
X4L
X4R
61B
81J
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 11 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
ROOF PANEL ASSEMBLY
PAGE 11ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
43D
43D
43D
81C
88B
81C
88B
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 12 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX PAGE 12ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
FRONT PANEL ASSEMBLY
89B
89A
32A
32A
54A
79B
54C
90B
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 13 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 13ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allowfor proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm (0.12") holes andsecure with screws
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USEDINSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLYENLARGING THE HINGE HOLE SETS IN THE JAMBUSING A 4mm (0.16") DRILL BIT
91A
91A
B
B
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 14 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 14ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
PANEL CONSTRUCTION
NOTE: Take care to ensure that both frontand rear wall panels are not positionedupside down. The top channel of eachpanel is pre-punched for attaching roofsheet. The base channels are notpre-punched.
SIDE WALL PANEL CHANNELS FITINTO THE NOTCHED FRONT ANDREAR WALL PANEL CHANNELS
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 15 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
FINAL CONSTRUCTION
PAGE 15ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver ShedModel: 23081S
DYNABOLT
BOLT & NUT
STEELANGLE
SLAB
WALLSHEET
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE
- DRILL A 10mm (0.39") HOLE INTO THE WALL SHEET
- DRILL A 10mm (0.39") HOLE INTO THE CONCRETE
ANCHORING OF SHED
LOCATION OF 8CONCRETE ANCHORS
INSTRUCTIONSAND VIDEOS
Space Saver ShedModel: 23081SK-PTX
ABSCO INDUSTRIES PAGE 16 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
1 | P a g e
EXPORT PRODUCT WARRANTY
AGAINST DEFECTS
Congratulations on your purchase of an ABSCO SHED
ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel.
We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 12 years from date of purchase.
This warranty does not apply to surface deterioration of panels caused by ‘Swarf” (Tiny particles of steel debris left from cutting, grinding or drilling operations) that has not been removed after building construction, or as a result of contact with damp soil, chemicals, fertilisers or other corrosive substances.
This warranty covers any Absco product used for normal domestic use and installed in accordance with the installation instructions.
This warranty does NOT cover Damage caused by storms, wind, rain, snow or poor foundations. This warranty does NOT cover ABSCO products installed in severe coastal, industrial or other highly corrosive environments. The warranty does not cover fasteners (screws, nuts, bolts, rivets, hasps or sliding padbolts).
The warranty is limited to replacement and delivery of components and does not include any labour or installation costs. The benefits given by the warranty are in addition to your other rights and remedies under a law in relation to the goods or services to which the warranty relates.
In the unlikely event a warranty claim is made, it must be supported by photographic evidence and details of the defect, including component part numbers, together with proof of purchase documentation (or on-line registration of purchase) and forwarded to the address below. Upon receipt of the warranty claim, the Customer Service Manager will contact you within three business days to advise you of the assessment outcome of the claim, which may include your expenses incurred in making the claim.
THE CUSTOMER SERVICE MANAGER, ABSCO SHEDS, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110
PHONE: +61 1800 029701 EMAIL: warranty@absco.com.au
Issued 16 July 2019
Recommended