View
1
Download
0
Category
Preview:
Citation preview
German Engineering for South African innovation
RS1 =
Is there any chance to make our clamps even smarter?
+
The answer is clearly: “YES!”
ONE FOR ALL!
The first East-West installation in London!
But... why East–West?
E W
N
S Solar Irradiance path
FS10
FS10 Crown
Sleeve
Concrete block
Threaded bar
Roof protection layer
FS10
FS10
FS10
FS10
FS10 FS10 installation in Germany
Images courtesy of GB Sol (UK)
FS10
✓ East-West + ballasted + flat roof system ✓ More panels per square meter ✓ 10o inclination = very low ballast requirements ✓ Fast installation time, due to 4 main components ✓ No rails at all! ✓ Only one tool is needed!
www.bestforeastwest.com ☝
FS10
MS+
For trapezoidal metal sheets (IBR) For corrugated metal sheets (S-profile)
+
MS+
2 MW at the Wolseley Training Academy and Warehouse (UK)
MS+
MG Renewables 500Kwp project at FUCHS processing factory (UK)
MS+
Image courtesy of SRT Scotland – 48 kWp
MS+
Image courtesy of SRT Scotland – 48 kWp
MS+
Image courtesy of SRT Scotland – 48 kWp
MS+
Portrait MetaSole+
MS+ P
MS+ P
MS+ P
FS10-S / FS18-S
Simple and reliable
• Few components
• Robust
• Simple & safe
• 10° and 18° tilt available
• Low ballast requirements given by wind tunnel testings and state of the art design
• Designed for 60 cell modules with module widths from 950 to 1050 mm
FS10-S / FS18-S
[A] Base rail [B] Ridge support [C] Eave support [D] Connector w/ self-tapping screw [E] Wind deflector [F] Renusol universal clamps [G] Protection mat blank [H] Protection mat, alu foil
[A]
[B]
[D]
[E]
Deflectors available for both standard pitches
(10 and 18 degrees)
Supports available for both standard pitches
(10 and 18 degrees)
[C]
[F]
[G] [H]
FS10-S / FS18-S
Technical features
• Short Base Rails: only 1,38 m long (1,73 m for FS18-S)
• System adapts to the roof like a chain
• Short and flat rails for optimal handling and optimized logistics
• Innovative connector: no nut needed, saves time and effort
• Slotted holes in connector to absorb thermal expansion
FS10-S / FS18-S
Technical features
• Fastening on the module‘s short side
• Wind deflector with self-tapping screws
• Different roof protection options, also for roofs with danger of plasticizer migration
• High margin for errors (wide contact surface for self-alignment)
• Flexible through modular concept (uneven roofs, free waterflow)
• Materials: aluminum, Stainless steel, galvanized steel
FS10-S / FS18-S
Wind tunnel testings / Ballast requirements
• With state of the art wind tunnel testing and design, low ballast requirements could be achieved!
• Ballast loads depend on project site etc.
• Minimal distance to roof edge: 0,5 m
• Main ballast to be placed in Streamliners
FS10-S / FS18-S
Row distance and earthing kit
With pre slotted rails and connectors: minimized effort for measurements and installation
• Different Row spacing and Shading angle options with two different connectors
Optional grounding kit available for potential equalisation of mounting system
FS10-S / FS18-S
• The grounding kit is composed of a screw with a washer
• The head presses the grounding wire to the structure
• The wire is not included in the set
• It is bonding from one row to the next
• Module bonding to the system, not included
The Grounding Kit (Part No. 920249)
FS10-S / FS18-S
FS10-S / FS18-S
Landfill
CS+
CS+
CS+
CS+
VS+
Solutions for all fields of application
VS+
Roof hooks for all kind of applications VS+
R420183 Roof Hook Flexible 90˚
VS+
Easy installation process
VS+
Landscape Format
Portrait format
VS+
ISSE
The InterSole mounting system is integrated in the roof, ensuring water tightness by overlapping the InterSole plates.
ISSE
The InterSole plates, made of durable HDPE, are hooked over the roof battens, just as standard roof tiles and secured with the InterSole anchors.
ISSE
The anchors hold the mounting rails which can be positioned vertically or horizontally, depending if portrait or landscape fixing is needed.
ISSE
ISSE
Milford Haven Marina (Pembrokeshire, UK)
ISSE
TS+
TS+
Base: V-Frame
Support bars for pitches
ranging from 10˚ to 35˚
+
40 x TS+ 25° Pre-
assembled
200 x TS+ V-Frame 10 x 10° 10 x 15° 40 x 20° 70 x 25° 40 x 30° 30 x 35°
Optimized handling and logistics... TS+
or
✓ Speedy installation time (minimum fastenings required)
✓Minimum components
✓Universal end and middle clamps used with MetaSole, VarioSole and InterSole
✓Aesthetically pleasing
TS+
TS+
S-Clamp for all standing seam classic profiles for Bemo, Kalzip and Plannja
▪ Exact bills of materials incl. pricing ▪ Layout planning ▪ Export files to *.dwg, *.pdf, *.dxf, *.xml ▪ Ballast calculation ▪ 3D rendering ▪ Verifiable statics ▪ Schematic drawings
Recommended