View
258
Download
8
Category
Preview:
Citation preview
2 3
Introduction
The objective of this solution guide is to facilitate your search of the right Loctite® and Teroson products for your specific maintenance and repair problems for all types of vehicles. Those are the same products used by the major automotive manufacturers and on race cars all around the world.
Mechanical Repair
Henkel Solutions for Vehicle Repairs
The Henkel portfolio covers all automotive maintenance and repair needs:
In its strive for increased customer satisfaction, Henkel goes far beyond than simply offering products. It offers added value with each product it sells. Henkel is a partner who understands your business and your products, who develops new production techniques and optimizes your processes.
A partner who can make a real contribution to long-lasting value creation for you:
Make use of our unique partnership. In addition to advanced support and trainings you will benefit from the most extensive technology portfolio and worldwide proven brands which meet the specific challenges of your industry. Wherever you are.
Body Repair Direct Glazing Seam Sealing Corrosion Protection
From vehicle production to repair and maintenance:
2 3
Go online and discover more!
and find:
• Detailed product information• Application case histories• Online product training• Videos, photos and games• Professional advice• Your contact
For more information on our products or the Henkel company just visit our website
www.loctite.com.au
Automotive Aftermarket Key Competencies:
SealingBondingCleaningCoatingTechnicalConsultancy
ExpertTraining
4 54
Innovation: Driving the Future
High Technology and Sustainable Solutions to Modern Challenges in Vehicle Repair
Seam Sealant System Terostat 9120 SF Terostat 9320• Replication of all OEM sealing beads• Super fast curing time
Terotex Aqua Range New waterborne protective coatings• Waterborne• Label-free (non-hazardous)• Improved performance
4 55
Direct GlazingTerostat 8597 HMLCMust be used with Terostat 8519 P PrimerCold applied with any dispensing tool• Drive-away time: 1 hr FMVSS
Loctite® 243 / Loctite® 263• Oil-tolerant• High temperature• Multi substrates
Instant Gasket• Instant seal gasket for all flange
material• Easy to use• Non-corrosive
12
14
16
20
22
24
26
28
8
10
30
32
33
36
38
40
42
43
44
45
4
46
6 7
Table of Contents
Innovation: Driving the Future
Mechanical Repair – Overview
Threadlocking
Thread Sealing
Retaining
Gasketing
Lubrication
Specialty Repair
Surface Preparation / Cleaning
Auto Care / Hand Cleaning
Body Repair – Overview
Direct Glazing
Seam Sealing
Bonding of Body and Parts
Instant Bonding
Plastic Repair
Body Protection – Overview
Cavity Protection
Underbody Coating
Anti Chip Coating / Sound Deadening
Kits / Equipment / Accessories
Index
8 9
Mechanical Repair
Loctite® 248 Stick or Loctite® 243Timing Chain Cover Bolts
ThreadlockingPage 10 / 11
GasketingPage 19
Thread SealingPage 12 / 13
Loctite® 577Thread SealantWater Temperature Sensor Unit Gasket
Loctite® 5920 Copper MaxxSiliconeReinforcement of Exhaust Manifold Gasket
Loctite® 5920 Copper MaxxSiliconeReinforcement of Head Gasket
Loctite® 243 or Loctite® 248 StickOil Pan Bolts
Loctite® 248 Stick or Loctite® 243Transmission Fluid Pan Bolts
Engine, Gearbox and Shaft – Product Applications
Loctite® 5699 Grey Maxx SiliconeWater Pump and Thermostat Housing Gasket
Loctite® 587 Blue Maxx SiliconeIntake Manifold
GasketingPage 19
Loctite® 5699 Grey Maxx SiliconeWater Pump Gasket
Loctite® 5910 Black Maxx SiliconeTiming Chain Cover Gasket
Loctite® 5910 Black Maxx SiliconeOil Pan Gasket
ThreadlockingPage 10 / 11
ThreadlockingPage 10 / 11
GasketingPage 19
GasketingPage 19
8 9
Loctite® 5910 Black Maxx SiliconeTransmission Fluid Pan Gasket
Here are some examples of the wide range of Loctite® product applications for automobile repairs. Most of these applications would also apply to heavy-duty vehicle or motorcycle repairs. Find additional information on our website: www.loctite.com
Loctite® 5910 Black Maxx SiliconeValve Cover Gasket
Loctite® 268 Stick or Loctite® 263Exhaust Manifold Bolts
Loctite® 5910 Black Maxx SiliconeRear Differential Gasket
Loctite® 248 Stick or Loctite® 243Rear Differential Housing Bolts
RetainingPage 14 / 15
Loctite® 641 Bearing Mount
Clean components with Loctite® 7070 ODC Free Cleaner & Degreaser prior to using Loctite® adhesives / sealants
CleaningPage 24 / 25
GasketingPage 19
ThreadlockingPage 10 / 11
GasketingPage 19
GasketingPage 19
ThreadlockingPage 10 / 11
10
Loctite® 243
Loctite® 243 Medium Strength Threadlocker•Locks and seals bolts, nuts and studs
to prevent loosening from shock, thermal cycling and vibration
•Seals against leakage•Allows disassembly with normal
tools where necessary•OEM specified
Applications:•Timingchainandvalvecover•Waterpumps•Oildrainplugs
Mechanical Repair
Threadlocking
Loctite® 222
Practical Hints:Loctite® 222 Low Strength Threadlocker•Ideal for low-strength threadlocking
of adjusting screws, countersunk head screws and set screws
•Good on low strength metals which could break during disassembly, e.g. aluminium or brass
Applications:•Carburetors•Headlamps•Throttlebodyassemblyscrews•Chokeassemblyscrews•Mixtureadjustmentscrews•Idlecontrolscrews•Bodylockscrews.
Description Purple liquid Blue liquid Blue semi solid stick Red liquid Red semi solid stick Green liquid
Strength Low Medium Medium High High Medium High
Thread size Up to M10 Up to M20 Up to M20 Up to M25 Up to M20 Up to M12
Service temperature range -55°C to 150°C -55 to 180°C -55°C to 150°C -55°C to 180°C -55°C to 150°C -55°C to 150°C
Recommended Primer 7471 7471 7649 7471 7471 7649
Loctite® Threadlockers•Invented by Loctite® to lock and seal threaded fasteners•Specified by Automotive OEMs•Work by filling the spaces between threads•Provide a secure, one-piece assembly that will not loosen under stress
Pack size Part - IDH No.
Bottle 10ml 19370 - 469052
Bottle 50ml 22250 - 231499
Pack size Part - IDH No.
Bottle 10ml 44088 - 1311374
Bottle 50ml 44092 - 1311321
•Clean parts with Loctite® 7070 ODC Free Cleaner and Degreaser before applying the adhesive
•If the threadlocker will be applied on inactive metal surfaces or below 5°C, pre-treat with Loctite® 7471 or 7649 (Activator)
•If the parts were in contact with aqueous washing solutions or cutting fluids which leave a protective layer on the surface, wash with hot water before use
11
Loctite® 263 Loctite® 290Loctite® 268Loctite® 248
Loctite® 290 Medium to High Strength Threadlocker•Special low viscosity grade for post
assembly applications•Ideal for instrument screws,
electrical switchgear threads and set screws
•Wick-in by capillary action
Applications:Bolts on:•alternatorsanddistributorclamps•carburettoradjustmentscrews•hairlinecracks.
•Relayadjustmentscrewsandalladjustment screws that need locking.
Loctite® 268 StickHigh Strength Threadlocker•Non-liquid, semi solid high strength
threadlocker to prevent fastener loosening by vibration, shock and thermal cycling
•Recommended for heavy-duty applications where permanent locking and sealing is required
•Over head assembly
Applications:Where disassembly is not required – •Heavyequipment•Machinetoolsandpresses•Pumpsandcompressors•Mountingbolts•Gearboxes.
Loctite® 263 High Strength Threadlocker•For permanent locking of assemblies
which may become loose•Seal fasteners•Particularly suited for heavy duty
applications•OEM specified
Applications:•Camshaftsprocketbolts•Pressfitfillertubes•Shockabsorberbolts•Ringgearbolts•Crankshaftjournalbolts•Transmissionshaftthreads.
Loctite® 248 Stick Medium Strength Threadlocker•Non-liquid, semi solid medium
strength threadlocker to prevent fastener loosening by vibration, shock and thermal cycling
•Seals joints•Overhead assembly
Applications:Where disassembly is required – •Machinetoolsandpresses•Pumpsandcompressors•Mountingbolts•Gear boxes.
Description Purple liquid Blue liquid Blue semi solid stick Red liquid Red semi solid stick Green liquid
Strength Low Medium Medium High High Medium High
Thread size Up to M10 Up to M20 Up to M20 Up to M25 Up to M20 Up to M12
Service temperature range -55°C to 150°C -55 to 180°C -55°C to 150°C -55°C to 180°C -55°C to 150°C -55°C to 150°C
Recommended Primer 7471 7471 7649 7471 7471 7649
Pack size Part - IDH No.
Bottle 10ml 44280 - 1374240
Bottle 50ml 44130 - 1331618
Pack size Part - IDH No.
Stick blister carded 19g 37775B - 933730
Pack size Part - IDH No.
Bottle 10ml 45075 - 1495667
Bottle 50ml 45076 - 1496855
Pack size Part - IDH No.
Stick blister carded 19g 933728 - 933728
12 13
Mechanical Repair
Loctite® Thread Sealants•Provide an instant, low pressure seal for metal pipes
and fittings•Will not creep, shrink or block systems by shredding
Thread Sealing
•All parts must be clean & dry before sealing – use Loctite® 7070 ODC Free Cleaner and Degreaser
•If the thread sealant will be applied on inactive metal surfaces or below 5°C, pre-treat with Loctite® 7471 or 7649 (Activator)
•If the parts have been in contact with washes or cutting fluids containing nitrites, wash parts with hot water
Description Brown liquid White semi solid stick White paste Brown liquid Yellow paste
Strength Medium Low Low to Medium Medium to High Medium to High
Thread size Up to 25mm Up to 25mm Up to 76mm Up to 19mm Up to 76mm
Temperature resistance -55°C to 150°C -55°C to 150°C -55°C to 200°C -55°C to 150°C -55°C to 150°C
Recommended Primer 7471 7649 7649 7471 7649
Loctite® 561
Loctite® 561 Pipe Sealant Stick•Semi solid stick formula offers added convenience
and portability•Fast, reliable curing•High pressure sealing at operating temperatures up
to +150°C•Instant seal to 100 psi
Applications:•Stainlesssteelfittings•Oilandcoolantlines•Ffuelfittings•Rearaxlefillplug•Intakemanifoldswitches,•Headboltsintothroughholes.
Pack sizes Part - IDH No.
Bottle 10ml 25344 - 470771
Bottle 50ml 54294 - 1560050
Pack sizes Part - IDH No.
Stick blister carded 19g 943428 - 943428
Loctite® 542
Loctite® 542 Thread Sealant•Locking and Sealing of metal pipes and fittings•Reduced migration•Compatible with hydraulic fluids •Prevent hydraulic circuits from fouling
Applications:Ideal for threaded fittings as used in hydraulic and pneumatic installations.
Practical Hints:
12 13
Loctite® 577
Loctite® 577 High Pressure Pipe Sealant•Prevents galling, leakage and loosening due to
vibration shock and thermal cycling•Fast, reliable curing•High pressure sealing at operating temperatures up
to +150°C•OEM specified•Potable water approval A/S 4020•AGA approval 4787 2600 Kpa
Applications:Ideal for all coarse metal threads and suitable for applications at low temperatures requiring fast cure. Suits parallel as well as tapered fittings.
Description Brown liquid White semi solid stick White paste Brown liquid Yellow paste
Strength Medium Low Low to Medium Medium to High Medium to High
Thread size Up to 25mm Up to 25mm Up to 76mm Up to 19mm Up to 76mm
Temperature resistance -55°C to 150°C -55°C to 150°C -55°C to 200°C -55°C to 150°C -55°C to 150°C
Recommended Primer 7471 7649 7649 7471 7649
Loctite® 569
Loctite® 569 Hydraulic / Pneumatic Sealant•Special grade for sealing and locking fittings on
hydraulic, pneumatic and fuel systems•Contains no particles to foul valves and other fine
orifices•Excellent resistance to fuels, hydraulic fluids, and
workshop chemicals•Compatible with hydraulic fluids •Prevent hydraulic circuits from fouling•AGA approval 3375 1050 Kpa
Applications:Recommended for fine threaded fittings as used in hydraulic and pneumatic applications.
Loctite® 567
Loctite® 567 PST Master Pipe Sealant•Prevents galling, leakage and loosening due to
vibration shock and thermal cycling•Where slow cure is required to prolong time frame
for adjusting valves and fittings•High pressure sealing at operating temperatures up
to +200°C•AGA approval 3207 1050 Kpa
Applications:Instant sealing grade containing PTFE for use on metal fittings, including •stainlesssteel •brass •aluminium.
Pack sizes Part - IDH No.
Tube 6ml 56707 - 234451
Tube 50ml 33540 - 266308
Pack sizes Part - IDH No.
Tube 50ml 56950 - 234473
Pack sizes Part - IDH No.
Tube 50ml 19259 - 229930
14 15
Mechanical Repair
Loctite® Retaining Compounds•Bond non-threaded, cylindrical metal assemblies
Retaining
•All parts must be clean & dry before sealing – use Loctite® 7070 ODC Free Cleaner and Degreaser
•If the retaining compund will be applied on inactive metal surfaces or 5°C, pre-treat with Loctite® 7471 or 7649 (Activator)
•If the parts have been in contact with washes or cutting fluids containing nitrites, wash parts with hot water
Description Green liquid Green liquid Yellow liquid Silver Green
Gap size Up to 0.2mm Up to 0.25mm Up to 0.2mm Up to 0.5mm Up to 0.2mm
Strength Medium to High High Medium High High
Temperature resistance -55°C to 150°C -55°C to 230°C -55°C to 150°C -55°C to 150°C -55°C to 150°C
Recommended Primer 7471 7649 - 7471 7649 7471 7471
Loctite® 620
Loctite® 620 High Strength High Temperature Retaining Compound•Bonding of cylindrical fitting parts•Suitable for applications where temperature
resistance up to 230°C is required
Applications:Typically used for high temperature retaining of parts with a clearance of interface fit, eg:•retainingbushes•bearings•seals•fans•liners.
Pack sizes Part - IDH No.
Bottle 50ml 62050 - 234776
Pack sizes Part - IDH No.
Bottle 10ml 19377 - 464829
Bottle 50ml 30015 - 234551
Loctite® 609
Loctite® 609 Shaft Fit Retaining Compound•Excellent load transmission and chemical
resistance•Prevents fretting corrosion
Applications:•Usedtobondrotorstoshafts•Securebushingsandsleeves•Augmentpressfits.
Practical Hints:
14 15
Loctite® 680
Loctite® 680 High Strength Retaining Compound•High load transmitting grade for permanent
assemblies•May require heat to dismantle•Excellent chemical resistance
Applications:Replaces set screws, clamp rings and snap rings. Used for wheel bearings, idler shaft, and press fit bearings.
Description Green liquid Green liquid Yellow liquid Silver Green
Gap size Up to 0.2mm Up to 0.25mm Up to 0.2mm Up to 0.5mm Up to 0.2mm
Strength Medium to High High Medium High High
Temperature resistance -55°C to 150°C -55°C to 230°C -55°C to 150°C -55°C to 150°C -55°C to 150°C
Recommended Primer 7471 7649 - 7471 7649 7471 7471
Loctite® 660
Loctite® 660 Quick Metal Press Fit Repair•Especially suited for filling large gaps•Ideal for restoring worn fits of parallel keys, splines
and tapers•OEM specified
Applications:Filling gaps between worn metal parts, e.g.:•shaftshousings•keys•bearings•bushes•ondrivetraincomponents,e.g.camshaftdrives,
clutches, flywheels and crankshafts.
Loctite® 641
Loctite® 641 Bearing Mount•Controlled strength ideal for cylindrical parts that
require disassembly•Prevents unwanted movement and fretting
corrosion
Applications:Used in:•slip,pressorshrinkfits•mountingbearings•bushes•sleeves•seals•valveguides•woodruffkeys•linerassemblies.
Pack sizes Part - IDH No.
Bottle 10ml 45078 - 1496887
Bottle 50ml 45079 - 1496859
Pack sizes Part - IDH No.
Tube 6ml 66010A - 473167
Tube 50ml 66040 - 473166
Pack sizes Part - IDH No.
Bottle 50ml 68050 - 234950
1616
Loctite® 518
Loctite® 518 Gasket Eliminator•Medium strength anaerobic flange
gasket for metal flanges•Non-dripping gel consistency, ideal
for overhead application and vertical faces
•Seals instantly against low pressures•OEM specified
Applications:For sealing of rigid flange faces, e.g. water pump flanges, differential and timing covers.
Mechanical Repair
Gasketing
Loctite® 510 Loctite® 515
Loctite® 510 Gasket Eliminator•Hightemperatureresistantflange•
High temperature and chemical resistant
•For metal flanges•Adapts to flange surfaces•Increases stiffness of assembled
flanges•OEM specified
Applications:Sealing of rigid flange faces on transmissions and engine casings. For flange assemblies close to hot areas, e.g. turbo charger.
Loctite® 515 Master Gasket •Seals all potential leak paths caused
by surface machine marks, damage, and minor distortion
•Eliminates preformed, pre-cut, paper, rubber and cork gaskets
•Flexes with flanges that move in service
Applications:Seals close fitting joints between rigid metal faces and flanges and will flex with minor flange movements.
Description Pink liquid Purple liquid Red gel Reddish brown paste Black paste Dark reddish brown liquid Dark brown liquid
Gap size Up to 0.1mm Up to 0.2mm Up to 0.5mm Up to 0.25mm Up to 0.12mm Up to 0.12mm Up to 0.12mm
Water/Glycol Resistance Excellent Good Good Good Good Good Good
Oil resistance Excellent Excellent Excellent Good Good Good Good
Temperature resistance -55°C to 200°C -55°C to 150°C -55°C to 150°C -55°C to 204°C -55°C to 204°C -55°C to 204°C -55°C to 170°C
Loctite® Gasket Sealants•Anaerobic and solvent based to be used
on rigid flange assemblies•Typically for fine mechanical machined
flange surfaces on cast steel or aluminium parts
•Both flanges are made of the same material
Practical Hints:
•If there are traces of old gasket left on the parts to be sealed, clean with Loctite® 790 Chisel Gasket Remover
•All parts must be clean and dry before sealing – use Loctite® 7070 ODC Free Cleaner and Degreaser
•Anaerobic products cure between metal surfaces in the absence of air
Pack sizes Part - IDH No.
Tube 50ml 45077 - 1496856
Tube 250ml 45082 - 1496883
Pack sizes Part - IDH No.
Tube 6ml 51517 - 209756
Tube 50ml 51531A - 473169
Cartridge 300ml 33530 - 265605
Pack sizes Part - IDH No.
Tube 6ml 51817 - 209759
Syringe 25ml 51827 - 1329465
Tube 50ml 19520 - 243271
Cartridge 300ml 51845 - 135482
1717
Loctite® Gasket Sealant #2
Loctite® Gasket Sealant #3
Loctite® Gasket Cement #4
Loctite® Gasket Sealant #1
Loctite® Gasket Sealant #3•Seals close fitting parts, especially
close tolerance flanges•Slow drying, flexible setting•Fuel resistant
Applications:Recommended for close fitting machined surfaces, sealing of hoses and dressing solid gaskets.
Loctite® Gasket Cement #4•Hard setting gasket•Economical and suitable for most
types of gasket material•Fuel resistant
Applications:Replaces set screws, clamp rings and snap rings. Used for wheel bearings, idler shaft, and press fit bearings.
Loctite® Gasket Sealant #2•Seals against leakage•Improves reliability and extends
gasket life•Excellent for metal to metal
assemblies•Slow drying, non-hardening
Applications:Used where sealing is more important than adhesion for coating valve cover, sump, diff and thermostat housing gaskets.
Loctite® Gasket Sealant #1•For sealing of rigid flanges and
joints where permanent assembly is required
•Extends gasket life and prevents leaks
•Fast drying, hard setting
Applications:Sealant for permanent assemblies, threaded connections, manifold gaskets, and coating diff cover gaskets.
Description Pink liquid Purple liquid Red gel Reddish brown paste Black paste Dark reddish brown liquid Dark brown liquid
Gap size Up to 0.1mm Up to 0.2mm Up to 0.5mm Up to 0.25mm Up to 0.12mm Up to 0.12mm Up to 0.12mm
Water/Glycol Resistance Excellent Good Good Good Good Good Good
Oil resistance Excellent Excellent Excellent Good Good Good Good
Temperature resistance -55°C to 200°C -55°C to 150°C -55°C to 150°C -55°C to 204°C -55°C to 204°C -55°C to 204°C -55°C to 170°C
Pack sizes Part - IDH No.
Tube 85g 30511 - 473150
Pack sizes Part - IDH No.
Tube 85g 30514 - 473139
Tube 311ml 30515 - 198819
Pack sizes Part - IDH No.
Brushtop bottle carded 50ml 3JB - 476031
Brushtop bottle 50ml 3JA - 476032
Brushtop can 473ml 30516 - 661977
Pack sizes Part - IDH No.
Brushtop bottle 50ml 4J - 476033
18
Loctite® 5900 Instant Gasket
Loctite® Instant Gasket•Instant seal gasket that cures within
minutes•Easy to handle•For all metal flanges•Long term resistant•Non corrosive, hazard label-free•Sensor safe•Neutral cure
Applications:•Engines•Gearboxes•Oilpans•Chaincovers•Transmissionhousingpumps•Thermostathousing•Heatexchanger•Protection/insulatingofelectrical
boxes.
Mechanical Repair
Gasketing
Loctite® Hi Temp Red RTV Silicone Gasket
Loctite® Blue RTV Gasket Maker
•If there are traces of old gasket left on the parts to be sealed, clean with Loctite® 790 Chisel Gasket Remover
•All parts must be clean and dry before sealing – use Loctite® 7070 ODC Free Cleaner and Degreaser
Loctite® Hi Temp Red RTV Silicone Gasket •High temperature resistance•Ageing resistant•No shrinkage, hardening or cracking•Acetic cure
Applications:•Rockercovers•Valvecovers•Timinggearcovers•Oilpans•Intakemanifolds•Waterpumps•Thermostathousings•Endseals•Intakemanifolds•Rearaxlehousings.
Loctite® Blue RTV Gasket Maker•Tough, flexible, multi purpose
silicone sealant•Ageing resistant•No shrinkage, hardening or cracking•For metal flanges of any size or
shape•Acetic cure
Applications:•Rockercovers•Valvecovers•Oilpans•Intakemanifolds•Waterpumps•Thermostathousings.
•Silicone products are used for flexible flange assembly
•Both flanges can be made of different metals
Practical Hints:
Pack size Part - IDH No.
Tube 85g 34248 - 287436
Tube 300ml 34247 - 287434
Pack size Part - IDH No.
Tube 85g 34243 - 287421
Tube 300ml 34244 - 287425
Pack size Part - IDH No.
Pressurised can 190ml 40479 - 899129
Cartridge 300ml 20166 - 212184
Description Blue paste Red paste Black paste Metallic/Black Paste Grey Copper coloured paste Metallic blue paste
Gap fill 6mm 6mm 6mm 6mm 6mm 6mm 6mm
Water/Glycol Resistance Good Good Good Good Good Good Good
Oil resistance Good Good Excellent Excellent Good Good Excellent
Temperature resistance -55°C to 204°C -60°C to 315°C -60°C to 232°C -55°C to 200°C -60°C to 200°C -60°C to 315°C -60°C to 260°C
19
Loctite® 5699 Grey Maxx Silicone
Loctite® 5920 Copper Maxx Silicone
Loctite® 587 Blue Maxx Silicone
Loctite® 5910 / 598 Black Maxx Silicone
Loctite® Copper Maxx Silicone•For metal flanges exposed to high
temperatures and high performance engines
•Low odour, non corrosive•Sensor safe•Neutral cure•OEM specified
Applications:•Turboexhaustsystems•Oilsump•Valvecover•Inletmanifold•Timingchaincover•Differentialcover.
Loctite® Blue Maxx Silicone•High flexibility•High oil and water glycol resistance•Enhances load bearing•Shock absorbing characteristics •Sensor safe•Neutral cure•OEM specified
Applications:•Generalgasketing•Gearbox/differentialcovers•Waterpumps•Timingcovers•Camcovers•Enginesumps•Inletmanifolds.
Loctite® Grey Maxx Silicone•For metal flanges with permanent
water / glycol contact•Non corrosive•Sensor safe•Neutral cure•OEM specified
Applications:•Waterpump,•Thermostat•Valvecover•Inletmanifold•Transmissionpan•Differentialcover,etc.
Loctite® Black Maxx Silicone•For metal flanges with permanent
oil contact•Low odour, non corrosive•Specially suited for filling large gaps•Sensor safe•Neutral cure•OEM specified
Applications:•Oilsump•Valvecover•Inletmanifold•Timingchaincover•Transmissioncover•Differentialcover.
Pack size Part - IDH No.
5910 Syringe 50g 39306 - 668698
598 Tube 95g 39145 - 640172
Pack size Part - IDH No.
Tube 95g 34238 - 287301
Cartridge 300ml 18581A - 473152
Pack size Part - IDH No.
Tube 85g 34249 - 287437
Pack size Part - IDH No.
Tube 95g 34251 - 287442
Cartridge 300ml 24237 - 287300
Description Blue paste Red paste Black paste Metallic/Black Paste Grey Copper coloured paste Metallic blue paste
Gap fill 6mm 6mm 6mm 6mm 6mm 6mm 6mm
Water/Glycol Resistance Good Good Good Good Good Good Good
Oil resistance Good Good Excellent Excellent Good Good Excellent
Temperature resistance -55°C to 204°C -60°C to 315°C -60°C to 232°C -55°C to 200°C -60°C to 200°C -60°C to 315°C -60°C to 260°C
20 21
Mechanical Repair
Lubrication
Loctite® Solvo-Rust Super Penetrating Oil
Loctite® Solvo-Rust Super Penetrating Oil•Immediate penetration to break the bond of
oxidized metal•Does not contain CFC•Will not affect painted surfaces•Low surface tension•Freed parts remain lubricated and protected from
corrosion
Applications:Frees rusted and seized bolts, screw fittings and general metal components.
Pack sizes Part - IDH No.
Aerosol can 310g FAR - 1024403
Pack sizes Part - IDH No.
Aerosol can 368g 81252 - 473164
Loctite® Freeze and Release
Loctite® Freeze and Release•Releases seized and corroded parts by shock
freezing (maximum chill down -43°C)•Thermal contraction of the parts allows penetration
of the lubricating ingredient•Released parts remain lubricated and protected
from corrosion
Applications:Seized and corroded assemblies of threaded and cylindrical parts across all industries.
Description Mineral Oil Mineral Oil Molybdenum-disulfide Silicone Oil Anti-Seize
Appearance Amber liquid Straw coloured liquid Black film Clear liquid Silver stick – semi sold
Temperature Range n.a. n.a. -29°C to 1315°C n.a. Up to 870°C
20 21
Loctite® Silver Stick
Loctite® Silver Stick•Exclusive Anti-Seize formula in stick form•Protects metal parts from rust, corrosion, galling
and seizing•Heavy-duty, high temperature •Smooth texture protects fine threads
Applications:Used to lubricate assemblies exposed to high temperatures, such as boiler, engines and turbine parts, exhaust, calliper brake and steam valve bolt threads.
Loctite® Silicone Spray
Loctite® Silicone Spray•Lubricates, protects and maintains metal and
plastic parts•Low viscosity•Does not attract dirt or dust•Release agent in moulds
Applications:Filling gaps between worn metal parts, e.g. shafts Lubricates guides, vehicle door locks and plastic components.
Loctite® Moly Dry Film
Loctite® Moly Dry Film•High temperature•Heavy-duty static loads•Will not attract dirt or dust
Applications:Used for lubricating and anti-seize on: •camwear-in •brakemechanisms •cables •gearcouplings.
Pack sizes Part - IDH No.
Aerosol can 340g 39895 - 473134
Pack sizes Part - IDH No.
Aerosol can 290g 24787 - 231009
Pack sizes Part - IDH No.
Stick blister carded 20g 944870 - 944870
Description Mineral Oil Mineral Oil Molybdenum-disulfide Silicone Oil Anti-Seize
Appearance Amber liquid Straw coloured liquid Black film Clear liquid Silver stick – semi sold
Temperature Range n.a. n.a. -29°C to 1315°C n.a. Up to 870°C
22 23
Mechanical Repair
Specialty Repair
Loctite® Muffler & Tailpipe Bandage
Loctite® Muffler & Tailpipe Bandage•Epoxy impregnated fibreglass bandage•Repairs cracks, holes and leaks
Applications:Mufflers and tailpipes.
Pack sizes Part - IDH No.
Bandage blister carded 106cm HTB2 - 476026
Pack sizes Part - IDH No.
Bandage blister carded 125cm MB1 - 476017
Loctite® High Temp Repair Bandage
Loctite® High Temp Repair Bandage •Fixes holes in mufflers, tailpipes and engine pipes•No mixing required, ready to use•Immediate results without the need of dismantling•Cures with exhaust heat to form a rock hard, long
lasting repair
Applications:Mufflers, tailpipes on cars, trucks, tractors and other equipment.
Description Heat shield, wrap around muffler and tailpipe bandage Wrap around bandage Epoxy repair High temp sealant Cleaner
Base Silicated pre-pregnated fibreglass Epoxy impregnated fibreglass Epoxy resin and aluminium flakes Alkaline paste Acid
Drying time at standard climate n.a. n.a. 2 hours 24 hours n.a.
22 23
Loctite® 15 Minute Radiator
Loctite® 15 Minute Radiator•Removes rust and sluge from cooling system•Fast acting – works in 15 minutes•Will not harm water pump seals and rubber hoses
Applications:All water-cooled engines on passenger vehicles, trucks and machinery.
Loctite® Muffl er Putty
Loctite® Muffler Putty•Strong adhesion to all metals•Seals holes and leaks•Imperverious to heat, corrosion and exhaust acids•Sets when manifold or exhaust are heated
Applications:Damaged exhaust systems, mufflers, manifolds and catalytic converters.
Loctite® Radiator & Petrol Tank Repair Kit
Loctite® Radiator & Petrol Tank Repair Kit•Seals small holes and weak seams•Repairs leaks and holes in all types of metal
radiators and fuel tanks•No need for welding or tank removal•Semi-cures in 15 min but remains flexible•Fully cured in 2 hours
Applications:Holes and seams in fuel tanks and radiators.
Pack sizes Part - IDH No.
Tape blister carded 20g RPK1 - 354947
Pack sizes Part - IDH No.
Tub 200g MP2 - 476015
Pack sizes Part - IDH No.
Bottle 175g FMC1 - 354959
Description Heat shield, wrap around muffler and tailpipe bandage Wrap around bandage Epoxy repair High temp sealant Cleaner
Base Silicated pre-pregnated fibreglass Epoxy impregnated fibreglass Epoxy resin and aluminium flakes Alkaline paste Acid
Drying time at standard climate n.a. n.a. 2 hours 24 hours n.a.
2424
Loctite® 7649
Loctite® 7649 ActivatorImproves and increases cure speed, especially•at low temperatures,•in applications with, passive metals,•on inert surfaces, or •where large gaps are involved
Applications:Primer/Activator for anaerobic products.
Mechanical Repair
Surface Preparation Cleaning
Loctite® 770 PP Primer Loctite® 7471
Loctite® 770 PP Primer•Improves adhesion to difficult to
bond surfaces•Helps to provide strong reliable
bonds•For all Loctite® branded
cyanoacrylates
Applications:Used in combination with all Loctite® brand cyanoacrylates on polypropylene, polyethylene, PTFE and thermoplastic rubber.
Loctite® 7471 Activator Improves and increases cure speed, especially•at low temperatures,•in applications with, passive metals,•on inert surfaces, or •where large gaps are involved
Applications:Primer/Activator for anaerobic products.
Pack sizes Part - IDH No.
Bottle 100ml 29520A - 990067
Pack sizes Part - IDH No.
Aerosol can 133ml 22477 - 1553340
Pack sizes Part - IDH No.
Bottle 100ml 22410A - 991076
Description Polyolefin Primer Activator Activator Non-aqueous solvent Solvent cleaner Solvent cleaner Solvent cleaner
Base Heptane Acetone / Isopropanol Acetone Hydrocarbon / Monoterpene Hydrocarbon / Acetone Water Methylene Chloride
Drying time at standard climate 30 sec 30 – 70 sec 30 – 70 sec n.a. n.a. n.a. n.a.
On-part life 8 hrs 7 days 30 days n.a. n.a. n.a. n.a.
2525
Loctite® Non-Chlorinated Parts Cleaner
Loctite® Natural Blue Cleaner & Degreaser
Loctite® 790 Chisel Gasket Remover
Loctite® 7070 ODC Free Cleaner & Degreaser
Loctite® Natural Blue Cleaner & Degreaser •Formulated for wipe down, pressure
spraying, ulrasonic and immersion cleaning processes
•Non-flammable and non-toxic•Biodegradeable•ODC free
Applications:•Machinery •Equipment •Valves •Compressors •Bearings •Castings •Motors •Tanks •Exteriorsiding •Windows.
Loctite® 790 Chisel Gasket Remover•Removes pre-cut gasket cements
as well as formed-in-place chemical gaskets
•Product will not run-off, even on vertical surfaces
•Excellent pre-cleaner prior to solvent washing
Applications:Designed to remove baked-on chemical gaskets, gasket cements and conventional materials from metal surfaces.
Loctite® Non-Chlorinated Parts Cleaner•Aggressively penetrates and
dissolves•Dries fast with no residue•Eliminates the need to disassemble
parts•VOC compliant•No chlorinated solvent run-off
Applications:Formulated to remove oil, grease, fluids, oxidised oils (gum) and asphalt from all types of metal parts.
Loctite® 7070 ODC Free Cleaner & Degreaser•General purpose, pre-assembly
cleaning treatment •Leaves no residues behind•Non corrosive •ODC Free
Applications:Used to remove most greases, oils, lubrication fluids, metal cuttings and fines from surfaces such as •metal,glass •rubber •mostplastics •paintedsurfaces.
Pack sizes Part - IDH No.
Aerosol can 473ml 20162 - 661976
Pack sizes Part - IDH No.
Aerosol can 420g 30545 - 1506652
Pack sizes Part - IDH No.
Trigger bottle 709ml 82249 - 235502
Canister 3.78L 82251 - 209804
Pack sizes Part - IDH No.
Aerosol can 510g 79040 - 642664
Description Polyolefin Primer Activator Activator Non-aqueous solvent Solvent cleaner Solvent cleaner Solvent cleaner
Base Heptane Acetone / Isopropanol Acetone Hydrocarbon / Monoterpene Hydrocarbon / Acetone Water Methylene Chloride
Drying time at standard climate 30 sec 30 – 70 sec 30 – 70 sec n.a. n.a. n.a. n.a.
On-part life 8 hrs 7 days 30 days n.a. n.a. n.a. n.a.
2626
Yuk Off ® Brake & Parts Cleaner
Yuk Off® Brake & Parts Cleaner•Developed for brake professionals
and mechanics•Aggressively penetrates and cleans
oil from brake systems and metal parts
•Dries fast with no residue•Safe use on aluminium•Chlorine free
Applications:•Brakesystems•CVjoints•Machinery•Tools•Farmequipment•Cleaningallsurfacespriorto
gasketing.
Mechanical Repair
Auto Care Hand Cleaning
Yuk Off ® Super Degreaser
Yuk Off® Super Degreaser •Powerful formulation for toughest
jobs•Easy application•Quick penetration through toughest
grease, oil and corrosion•Not harmful to metal, rubber or
plastic•Rinses off easily with water
Applications:•Enginesandparts•Garagefloors•Driveways•Machinery•Motorcycles•Chainsaws•Lawnmowers•Outboardengines.
Pack sizes Part - IDH No.
Aerosol can 400g Y101 - 300684
Pack sizes Part - IDH No.
Aerosol can 417g 24441 - 230824
Description Hydrocarbon solvent Hydrocarbon solvent Hydrocarbon solvent Hydrocarbon solvent Wipes Organic solvent
Base Petroleum spirit Heptane based Silane based Heptane based Aqueous based Organic solvent
Appearance Turbid liquid Clear liquid Clear liquid Clear liquid Textured towel Pale paste
2727
Yuk Off ® Bumper & Tyre Sheen Loctite® Hand Wipes Yuk Off ® Orange Hand
CleanerYuk Off ® Carb & Throttle
Body Cleaner
Loctite® Hand Wipes•Pre-moistened waterless towels•Scrubs off the toughest grease and
grime without rinsing and drying•Leaves no residues behind•Fortified with emollients and natural
oils
Applications:Premoistened with a powerful cleaning formula, the abrasive, yet non-scratching fabric removes: •tar•grease•wax•ink•paint•lubricants•adhesives.
Yuk Off® Orange Hand Cleaner•Effective on all stains•Contains premium-grade cleansing
agents•Citrus-based smooth formula with
skin conditioners•PH balanced
Applications:Cleans handes quickly and effectively from dirt, grease, resin, ink, paint, glue, tile cements and other stubborn stains whilst soothing and protecting raw and rough hands.
Yuk Off® Bumper & Tyre Sheen•Fast and easy to apply•Brings out the natural colour of tyres•Protects and promotes shine
Applications:•Tyres•Bumpers•Mud-flaps•Dashboards•Otherrubbercomponents.
Yuk Off® Carb & Throttle Body Cleaner•Fast acting, highly concentrated
cleaner•Quickly cuts and removes, grease,
gum and varnish•Oxygen sensor safe
Applications:Strips away baked-on carb, gum, varnish and other products, from: •manualandautomaticchokes•baffleplates•carburettorlinkages•throttlebodies.
Pack sizes Part - IDH No.
Aerosol can 340g 24790 - 231015
Pack sizes Part - IDH No.
Aerosol can 350g Y182 - 300685
Pack sizes Part - IDH No.
Tub 75pck 34943 - 337637
Bucket 130pck 34944 - 337638
Pack sizes Part - IDH No.
Bottle 400ml 31908 - 366943
Pump can 4L 31909 - 367218
Bucket 15L 31910 - 367217
Description Hydrocarbon solvent Hydrocarbon solvent Hydrocarbon solvent Hydrocarbon solvent Wipes Organic solvent
Base Petroleum spirit Heptane based Silane based Heptane based Aqueous based Organic solvent
Appearance Turbid liquid Clear liquid Clear liquid Clear liquid Textured towel Pale paste
28 29
•Terostat 8519 P Primer
•Terostat 8560 AC-25
•Terostat 9097 PL HMLC
•Terostat 8597 HMLC
•Terostat 8630 2K
•Terodicht Elastic•Loctite Rear View Mirror Bonder
•Terostat MS 939•Terostat 9120 SF•Terostat 9320
•Teroson Adhesive Spray•Teromix 6700•Terokal 5055•Terostat 9220
•Loctite 3038•Loctite 3805•Loctite 5 Minute E-Pox-E•Loctite Strong E-Pox-E Adhesive•Locitite Metal Magic Repair•Loctite Contact Adhesive & Trim Cement•Loctite White E-Pox-E Ribbon Putty
With Henkel, customers have access to a full range of Teroson and Loctite® body repair and protection products to meet the needs of today’s body repair shop. They include adhesives and sealants, solutions for direct glazing, noise control, corrosion protection, plastic repair and body filling. Many of these products are specified for auto market repair by leading automobile manufacturers.
Body Repair
Instant Bonding Page 36 - 37
Plastic RepairPage 38 - 39
•Loctite 401•Loctite 406•Loctite 454•Loctite 480•Loctite Super Glue Original•Loctite Super Glue Xtra Gel•Loctite Control Instant Adhesive
•Terokal 9225•Terokal 9225 SF•Terokal 150•Teroson FL Cleaner & Thinner•Teroson Plastic Filler•Teroson Plastic Repair Kit
Bonding of Body and Parts Page 33 - 35
Seam SealingPage 32
Direct GlazingPage 30 - 31
28 29
Rubber mounted
Bonded
Encapsulared windscreen
Glass / ceramic
Glass
Trimmed residual bead
Paint
Aluminium
Bare metal
GFC / SMC
E-coated metal
Primer
Activator
Warm application
Cold application
High modulus
Low conductive
1 component
2 component
Installation time in minutes
Drive-away time FMVSSTe
rost
at 9
120
SF
Tero
stat
932
0 SF
Chemically curable
SMP
Paint
E-coated metal
GFC / SMC / plastics
Aluminium
Bare metal
Glass / ceramic
Wood
Cold application
1 component
Sealing and bonding
Isocyanate free
Paintable
Sprayable
Brushable
Non corrosive
Seam SealingPage 32
Tero
stat
859
7 HM
LC
Tero
stat
863
0 2K
HM
LC
9097
PL
HMLC
Tero
stat
851
9 P
Tero
dich
t Ela
stic
Tero
son
FL
Tero
son
Appl
icat
orsDirect Glazing
Page 30 – 31
Technology
Substrate
Properties
Curing System
Product base
Substrates
Properties
20 30 25
1 h 1 h 1 h
Pack sizes Part - IDH No.
Bottle 100ml 1520836 - 1520836
Pack sizes Part - IDH No.
Tin can 1L 1557872 - 1557872
Pack sizes Part - IDH No.
Cartridge 310ml 1535434 - 1535434
30 31
Body Repair
Direct Glazing
Terostat 8519 P Primer Terostat 8560 AC-25 Terostat 9097 PL HMLC
•Teroson products answer each specific direct glazing need
•Bonding of screens and windows of all vehicle types
•Complies to the specifications from original car manufacturers
Product base Polyurethane based solvent Silane based solvent 1 component polyurethane 1 component polyurethane 2 component polyurethane Artificial resins/synthetic rubber Modified acrylic ester
Application method / drying time up to 15 mins Clean cloth Cold / 25 min Cold / 15 min Warm / 30 min Cold n.a.
Drive-away time FMVSS 212/208 (airbag) n.a 30 secs - 1 hour 1 hr 1 hr 2 hrs (cars) n.a n.a
HMLC - High Modulus/Low Conductive n.a. n.a. Yes Yes 2 hrs (cars) No No
•Using the Terostat “Kits” offers all needed products in one package for a windscreen replacement job.
•Teroson FL was specially developed to remove silicone residues that can be found on windscreens which can make the adhesion difficult.
•Teroson 8519 P is an universal primer: to use on the car frame, on the windscreen and on remaining bead.
•The unique Teroson sliding nozzle gives instantaneously the right bonding bead depending on the size of the windscreen, for a safer result and reduced product consumption.
Practical Hints:Terostat 9097 PL HMLC •HMLC – High Modulus and Low
Conductivity•Without primer, activators or active
wipe •Built-in UV stability•Good sag resistance, no stringing, for
all vehicles•To apply cold and only with Power
Line II gun•OEM specified
Applications:For fast and efficient windscreen replacement, with shorter working time (no primer application).
Terostat 8519 P Primer – All in one glass primer / activator•All in one primer / activator to use on
the metal frame, the windscreen and the remaining cut bead
•Very short evaporation time•Excellent UV protection•Corrosion protection for small flange
damage
Applications:For all car windows, to promote adhesion of direct glazing adhesives and sealants on glass metal, paint, ceramic, some plastics, PUR.
Terostat 8560 AC-25 – Pre-treatment •Active wipe for surface treatment of
glass and ceramic coatings •No need to wipe off•Suitable for automatic spray
application
Applications:Used for cleaning and activating glass and ceramic coatings prior to direct glazing without black glass primer.
Pack sizes Part - IDH No.
Cartridge 310ml 1548592 - 1548592
Sausage 570ml 1547937 - 1547937
Pack sizes Part - IDH No.
Cartridge 310ml 915287 - 915287
Pack sizes Part - IDH No.
Cartridge 310ml 12879Z - 800673
Pack sizes Part - IDH No
Kit blister carded 1.2ml MA2 - 354940
Kit II blister carded 0.5ml MA3 - 476018
30 31
Terostat 8597 HMLC Terodicht ElasticTerostat 8630 2K HMLC Loctite® Rear View Mirror Bonder
Product base Polyurethane based solvent Silane based solvent 1 component polyurethane 1 component polyurethane 2 component polyurethane Artificial resins/synthetic rubber Modified acrylic ester
Application method / drying time up to 15 mins Clean cloth Cold / 25 min Cold / 15 min Warm / 30 min Cold n.a.
Drive-away time FMVSS 212/208 (airbag) n.a 30 secs - 1 hour 1 hr 1 hr 2 hrs (cars) n.a n.a
HMLC - High Modulus/Low Conductive n.a. n.a. Yes Yes 2 hrs (cars) No No
Terodicht Elastic •Good sag resistance•Ideal for leaking windscreens even
under wet conditions•Water resistant•Apply warm and only with Power
Line II gun
Applications:For emergency sealing on all vehicles with rubber mounted screens. Use any type of professional dispensing tools for application; best used with Staku pistol.
Loctite® Rear View Mirror Bonder•Compensates for differential thermal
expansion of parts•Cures when confined with the aid of
Loctite 7649 Activator
Loctite® Rear View Mirror Bonder II•Bonds permanently mirror brackets
to windscreens•Ready for use in minutes•Used by professionals
Applications:Bonds materials such as metals, glass, ceramic or plastics.
Terostat 8630 2K HMLC•HMLC – High Modulus and Low
Conductivity•For all vehicles (best for trucks and
busses)•Good sag resistance•No stringing•Apply warm and only with Power
Line II gun•OEM specified• Thatcham approved
Applications:The ultimate performance, perfect for large windscreens and independent of weather conditions.
Terostat 8597 HMLC •HMLC – High Modulus and Low
Conductivity•For all vehicles •Good sag resistance•no stringing•Cold applied with any type of
dispensing equipment (best results with Power Line II gun)
•OEM specified
Applications:For windscreen replacement where following the OEM original method (with primer) is important and when a strong guarantee of safety is required.
32 33
Terostat 9120 SF Terostat 9320
Terostat 9120 Super Fast•High viscosity bodywork sealant for
sealing gaps and joints•Very good adhesion without primer•Excellent elasticity•Excellent UV resistance and
weathering performance•Very good sag resistance•Solvent free, isocyanate free•Large gap filling•NVH properties•Compatible for solvent-water borne
systems•OEM specified
Applications:For all areas where sealing, bonding and fast over painting is required. Particularly suitable for bonding performance accessories, e.g. spoilers, trim strips, etc.
Terostat 9320•Low viscosity seam sealant•Very good, sprayable adhesion
without primer•Excellent UV resistance and
weathering performance•Fast curing speed•Overpaintable wet on wet up to 3
days after application•Very good sag resistance•Solvent free, isocyanate free•OEM specified
Applications:OEM texture refinish for all vehicles. Application with Teroson Power Line II gun and Multi Press gun.
Terostat MS 939 •Strong elastic adhesive, allows
dynamic stresses•Immediate high position tack after
joining parts•Excellent back filler•Good UV resistance and weathering
performance•Medium modulus•Very good sag resistance•Solvent free, isocyanate free
Applications:Used for elastic bonding of metals and plastics, e.g side panelling and bonding of the roof skin in the vehicle and caravan manufacture. Also very suitable for elastic seam sealing and joint sealing of the interior and/or exterior vehicle body parts.
Terostat MS 939
Body Repair
Seam Sealing / Bonding of Body and Parts
•For all body repair sealant applications•For bonding applications•For different over-painting requirements
Product base Modified silane polymer Modified silane polymer Modified silane polymer Styrene Butadiene Rubber 2 component polyurethane 2 component epoxy resin Modified silane polymer
Evaporation time / skin over time / pot life 10 - 20 min 10 - 20 min 10 min 10 min 10 min 80 min Approx 15 min
Paintability / Bonding properties Wet on wet, up to 3 days Wet on wet, up to 3 days Paint compatible Contact adhesive spray 2 component bonder Panel bonder Power bonder
Pack sizes Part - IDH No.
WHITE - Cartridge 310ml 1358213 - 1358213
GREY - Cartridge 310ml 1358216 - 1358216
Wide Flat Nozzle 34914 - 744502
Pack sizes Part - IDH No.
BLACK - Cartridge 300ml 13916B - 211743
OCHRE - Cartridge 300ml 13917C - 272232
Pack sizes Part - IDH No.
WHITE - Sausage 570ml 14652B - 212653
BLACK - Sausage 570ml 13682X - 100145
GREY - Sausage 570ml 13696M - 197363
•Terostat 9120 SF / 9320 SF can be spot welded
•For OEM finish, use the different Teroson nozzles
•Curing time can be accelerated by infrared
Practical Hints:
32 33
Teroson® Adhesive Spray •High initial strength (allow 10 min for
solvent evaporation)•Contact and pressure sensitive•Particularly suitable for bonding
porous materials
Applications:To bond fabric, polyester and polyester foams, leather, cardboard and coverings.
Teromix 6700 •Fast cure, high strength independent
from temperature / humidity•Good corrosion protection, excellent
resistance to chemicals•Adheres to a wide range of materials•Can be spot welded before curing•Allows over-painting•Solvent free•OEM specified
Applications:Suitable for sealing and bonding seams on wheel cut-outs between side panels and wheel arches, for bonding plastic spare wheel wells in boot floor or for bonding cover panels (door, wheel arch). Provides efficient corrosion protection for vehicle body joints, e.g. on weld-in body sections between wheel arch and fender, on the hem flanges of doors, boots, lids and covers.
Terokal 5055 •Crash resistant structural bonder for
car panels•Easy to use without primer, and spot
weldable 90 min. after application•Fast build-up of the initial strength
to prevent panel movements after original positioning
•Solvent free adhesive•Can be cold applied but warm
application (up to 60°C) is recommended
•Curing at room temperature (heating possible)
Applications:Structural rigid bonding for roof and panel bonding of vehicles (aluminium, steel and SMC).
Terostat 9220 •Powerful adhesive for flexible
permanent spot welding without scarring
•Adheres to a wide range of materials without primer
•High resistance to ageing, weathering, UV light and salt water
•Isocyanate and solvent free•OEM specified
Applications:To bond metal to metal, plastics (except PP, PE), wood, painted surfaces. Use any type of professional dispensing tools for application; best with Power Line II gun.
Teroson® Adhesive Spray Teromix 6700 Terokal 5055 Terostat 9220
Product base Modified silane polymer Modified silane polymer Modified silane polymer Styrene Butadiene Rubber 2 component polyurethane 2 component epoxy resin Modified silane polymer
Evaporation time / skin over time / pot life 10 - 20 min 10 - 20 min 10 min 10 min 10 min 80 min Approx 15 min
Paintability / Bonding properties Wet on wet, up to 3 days Wet on wet, up to 3 days Paint compatible Contact adhesive spray 2 component bonder Panel bonder Power bonder
Pack sizes Part - IDH No.
Aerosol can 400ml 15787K - 661974
Pack sizes Part - IDH No.
Cartridge 2x25ml 17034Q - 642666
Pack sizes Part - IDH No.
Cartridge 250ml 1358254 - 1512156
Pack sizes Part - IDH No.
Cartridge 310ml 10641R - 265673
34 35
Loctite® 5 Minute E-Pox-E Adhesive
Body Repair
Bonding of Body Parts
Loctite® 3805Loctite® 3038
Loctite® 3805•Fast setting, two component
adhesive and filler system•Excellent electrical insulator•High temperature resistance•Non-porous
Applications:Ideal for repairs, filling, bonding to: •ironsteelbass •bronze •aluminium •copper
Can be drilled, tapered, threaded or filed. Typically used under speedy sleeves.
Loctite® 3038•Two-part acrylic•Good adhesion to e-coated metals
and polyolefin substrates (PP, PE)•Good impact resistance•No surface treatment required
Applications:Plastic water tanks, plastic repairs.
Loctite® 5 Minute E-Pox-E•Two-part free flowing clear epoxy
adhesive system•High chemical resistance•No shrinkage•Clear setting
Applications:Ideal for rigid materials. Used for exterior trim, plastics and metal repairs.
Product Base Acrylic Epoxy Epoxy Epoxy Epoxy Solvent Epoxy
Viscosity Gel Heavy Paste Gel Gel Putty stick Paste Ribbon
Pot life 4 min 10 – 15 min 4 – 6 min 4 – 6 min 3 – 5 min 3 - 4 min 5 min
Pack sizes Part - IDH No.
Kit blister carded 56g 24180 - 459312
Pack sizes Part - IDH No.
Dual cartridge 50ml 1571120 - 1571120
Dual cartridge 490ml 42547 - 1574771
Dispensing gun 50ml 1034026 - 1034026
Manual gun 490ml 985246 - 478600
Pneumatic gun 490ml 985249 - 470572
Mixer nozzle 50ml 1034575 - 1034575
Mixer nozzle 490ml (8mm) 98719 - 1084255
Mixer nozzle 490ml (10mm) 98722 - 1084092
Pack sizes Part - IDH No.
Syringe 25ml EFQ5 - 354942
34 35
Loctite® Metal Magic Repair
Loctite® Contact Adhesive & Trim Cement
Loctite® White E-Pox-E Ribbon Putty
Loctite® Metal Magic Repair•Kneadable epoxy adhesive•Adheres to moist surfaces and cures
even under water•Resistant to corrosion and most
chemicals•Steel-filled product that cures to a
steel-like finish
Applications:Rebuilds small engine parts, seals leaks, fills cracks and voids in metal i.e. thermostat housing, tappet cover etc.
Loctite® White E-Pox-E Ribbon Putty•Two part epoxy for sealing and filling •Suitable for underwater applications•High temperature resistance•Resistant to petrol, oil, grease, etc.
Applications:Ideal for repairing leaky boats, drain pipes and metal water tanks, filling nail hole screws.
Loctite® Super Strong E-Pox-E Adhesive
Loctite® Super Strong E-Pox-E Adhesive•Two-part free flowing clear epoxy
adhesive system•Impervious to water and petrol
derivatives
Applications:•Idealmetal•Wood•Rubber•Glass•China.
Loctite® Contact Adhesive & Trim Cement•Multi-purpose contact adhesive•Bonds most porous and non-porous
materials•Super strength•Requires no mixing•Highly resistant to heat and water
Applications:•Cartrims•Plastic•Timber•Vinyl•Felt•Tiles•Cork•Cardboard•Cementsheeting.•Metal•Rubber
Product Base Acrylic Epoxy Epoxy Epoxy Epoxy Solvent Epoxy
Viscosity Gel Heavy Paste Gel Gel Putty stick Paste Ribbon
Pot life 4 min 10 – 15 min 4 – 6 min 4 – 6 min 3 – 5 min 3 - 4 min 5 min
Pack sizes Part - IDH No.
Syringe 25ml EFQ7 - 354941
Pack sizes Part - IDH No.
Stick 113g 98853 - 645440
Pack sizes Part - IDH No.
Tube 148ml 30537 - 1715477
Pack sizes Part - IDH No.
Ribbon blister carded 39g WER2 - 216005
36 37
Body Repair
Instant Bonding
Loctite® 406 Loctite® 454
•Use Teroson FL or Loctite® 7070 ODC Free Cleaner and Degreaser for surface preparation
•Use Loctite® 770 PP Primer for difficult to bond plastics
•Loctite® 406 displays excellent bond strength on rubber
Loctite® 406 – Instant Adhesive•For general purpose application of
difficult to bond surfaces•Bonds a wide range of substrates•Very high strength on close-fitting
parts
Applications:Metal, rubber, ceramics, china and most plastics.
Loctite® 454 – Instant Adhesive Gel•For general purpose application•Will not drip or run•Non-wicking, specially suited for
porous materials•Bonds similar or dissimilar substrate
combinations of wood, metals, ceramics, most plastics
•OEM specified
Applications:Ideal for overhead application as well as for vertical faces.
Product base Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate
Fixture time / skin-over time 5 – 20 sec 5 – 20 sec 5 – 20 sec 60 – 120 sec 5 – 20 sec 5 – 20 sec 5 – 20 sec
Bonding properties Instant adhesive liquid Instant adhesive liquid Instant adhesive gel Rubber toughened instant adhesive Instant adhesive liquid Instant adhesive gel Instant adhesive liquid or gel
•For bonding body components•For emergency repairs•For light structural bonding
Loctite® 401
Loctite® 401 – Instant Adhesive•General purpose instant adhesive•Bonds a wide range of similar or
dissimilar substrates•Very high strength on close-fitting
parts•OEM specified
Applications:Emblems, plastic parts, rubber seal.
Practical Hints:
Pack sizes Part - IDH No.
Tube blister carded 3g 16704 - 547691
Bottle 25ml 40124-25 - 265607
Pack sizes Part - IDH No.
Bottle 25ml 40633-25 - 265606
Pack sizes Part - IDH No.
Tube blister carded 3g 45404 - 233998
Tube 20ml A045416 - 466862
36 37
Loctite® 480 Loctite® Super Glue Original
Loctite® Super Glue Xtra Gel
Loctite® Control Instant Adhesive Gel / Liquid
Loctite® Super Glue Original•Universal high strength adhesive•Highly viscuous formula•Suitable for virtually all materials•Super strong, super fast
Applications:Metal, laminated plastics, rubber, ceramics, china.
Loctite® Control Instant Adhesive Gel / Liquid•Multi-purpose instant adhesive•Self-piercing precision applicator•Spill-proof•Controlled and accurate application•Available in liquid or gel formula
Applications:Used for bonding where precision application is required.
Loctite® 480 – Instant Adhesive •Black rubber toughened grade•For metal-to-metal and
metal-to-rubber bonding•High peel strength•High shock resistance
Applications:Rubber door seals, metal trims.
Loctite® Super Glue Xtra Gel•Gel formula •Fast and heavy-duty repairs to
vertical surfaces•Suitable for porous and non-porous
materials
Applications:Metals, composite materials, wood, cork, foam, leather, card, paper, plaster and unglazed ceramics.
Product base Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate Cyanoacrylate
Fixture time / skin-over time 5 – 20 sec 5 – 20 sec 5 – 20 sec 60 – 120 sec 5 – 20 sec 5 – 20 sec 5 – 20 sec
Bonding properties Instant adhesive liquid Instant adhesive liquid Instant adhesive gel Rubber toughened instant adhesive Instant adhesive liquid Instant adhesive gel Instant adhesive liquid or gel
Pack sizes Part - IDH No.
Bottle 25ml 16819-25 - 229394
Pack sizes Part - IDH No.
Tube blister carded 3ml SG3 - 476012
Pack sizes Part - IDH No.
Tube blister carded 3g SGX3 - 476011
Pack sizes Part - IDH No.
Gel: Bottle 3g 40778 - 799790
Liquid: Bottle 3g 40779 - 799851
Pack sizes Part - IDH No.
Cartridge 50ml 10991X - 629355
Pack sizes Part - IDH No.
Cartridge 50ml 882088A - 912812
38 39
Body Repair
Plastic Repair
•Re-shape plastic parts before repair•Compatible with all types of plastics•Use Terotex Super 3000 / Terotex Super 3000 Aqua for OEM finish (texture)•Not for fuel tanks and radiator houses•Use sanding grit up to P120
•Applicable for all types of external plastic car parts (one fits all)•Single components and set OEM specified
Product base Polyurethane Polyurethane Chlorinated Polyolefins Petroleum Spirit Polyester Kit
Application Bonding Bonding Primer Surface Preparation Surface Filling Plastic Repair
Pot life (standard climate) Approx 10 min Approx 2 min n/a n/a 4 -5 min n/a
Repair area Less than 5 cm Less than 5 cm Adhesion promotion for plastics Paint, metal, plastics Plastic surfaces Plastics outside the car
Terokal 9225 SF
Terokal 9225 SF•Fast curing•Excellent sandability•Very good paintability with all
car paint systems when using Terokal 150
•OEM specified
Applications:Bumpers, spoilers, aprons, etc. Easy application with Teromix gun (2 x 25ml) and easy mixing with twin cartridge and static mixer.
Terokal 9225•Excellent sandability•Very good paintability with all car
paint systems when using Terokal 150
•OEM specified
Applications:Bumpers, spoilers, aprons, etc. Easy application with Teromix gun (2 x 25ml) and easy mixing with twin cartridge and static mixer.
Practical Hints:
Terokal 9225
Pack sizes Part - IDH No.
Aerosol 150ml 10985Q - 629356
Pack sizes Part - IDH No.
Tin can 1L 92679 - 601097
Pack sizes Part - IDH No.
Tin 920g 882485 - 912272
Pack sizes Part - IDH No.
Kit 1051637 - 1051637
38 39
Product base Polyurethane Polyurethane Chlorinated Polyolefins Petroleum Spirit Polyester Kit
Application Bonding Bonding Primer Surface Preparation Surface Filling Plastic Repair
Pot life (standard climate) Approx 10 min Approx 2 min n/a n/a 4 -5 min n/a
Repair area Less than 5 cm Less than 5 cm Adhesion promotion for plastics Paint, metal, plastics Plastic surfaces Plastics outside the car
Teroson® FL CleanerTerokal 150 Teroson® Plastic Filler
Teroson® Plastic Filler•No shrinkage, very good sag
resistance•Compatible with all common car
paints•Sanding grit up to P240•OEM specified
Applications:For finishing plastic repairs and for all minor damages on exterior plastic car parts.
Teroson® FL Cleaner•For all surfaces before and after any
bonding or sealing job•Use Teroson FL whenever repairing
plastic, glass or metal parts•Extremely fast solvent evaporation
Applications:Teroson FL is also a diluent for many Teroson products like underbody coatings, plastic repair adhesives, direct glazing products, etc.
Terokal 150•Excellent base coat•Very short evaporation time•Fast follow-up for finishing•Easy, precise application and safe
handling•Compatible with all types of plastics
and paints
Applications:To be used for Plastic Repair Kit and Terokal 9225, 9225 SF, Plastic Filler and before painting.
Teroson® Plastic Repair KitContents•Teroson FL Cleaner & Thinner•Terokal 150 Plastic Primer•Terokal 9225 SF•Teroson Plastic Filler•Teromix Hand Gun•Teromix Static Mixer Nozzles•Teroson Metal Reinforcement Strips•Working instructions
Applications:Bumpers, spoilers, aprons, etc.
Teroson® Plastic Repair Kit
40 41
Sound Deadening / Acoustics Page 44
•Terodem
Underbody Protection Page 43
Cavity Protection Page 42
Anti Chip Coating / Sound Deadening Page 44
•Teroson Underbody Coating Spray •Terotex Record 2000 Black •Terotex Record 2000 Aqua•Teroson Zinc Spray
•Teroson Cavity Spray•Terotex HV 350 Cavity Wax•Terotex 450 Aqua
•Anti Chip Adhesive Spray Black•Anti Chip Adhesive Spray Light•Terotex Super 3000•Terotex Super 3000 Aqua
Body Protection
40 41
Tero
tex
Reco
rd 2
000
Aqua
Tero
tex
Supe
r 300
0 Aq
ua
Anti
Chip
Spr
ay
Tero
tex
Wax
Zinc
Spr
ay
Tero
tex
HV 3
50
Tero
son
Cavi
ty S
pray
Tero
tex
HV 4
50 A
qua
UBC
Spra
y
Zinc + epoxy agent
Synthetic resin
Rubber + resin
Wax
Waxes + polymers
Waterborne
Bare metal
Aluminium
E-coated metal
Paint
Corroded steel
Wax coatings
PVC
PVC-wax
Bitumen / rubber
Rubber / resin
Wood
Paintable
Hs (high solids)
Noise control
Protective CoatingPages 42 - 44
Product base
Substrates
Properties
Pack sizes Part - IDH No.
Aerosol can 500ml 15571A - 882486
Pack sizes Part - IDH No.
Tin can 1L 793958 - 868519
Pack sizes Part - IDH No.
Tin can 1L 1335488 - 1335488
42 43
Body Repair – Underbody
Cavity Protection Underbody Coating Rust Protection
•Shake spray cans thoroughly before application
•For better penetration warm up HV materials before use (recommended in cold seasons)
•For professional use•For repair and maintenance
Terotex HV 450 AquaTerotex HV 350 Cavity WaxTeroson® Cavity Spray
Terotex HV 450 Aqua•No unpleasant solvent smell•Complete coating of all cavities•Built-in corrosion inhibitor•No cracking or dripping in extreme
temperatures
Applications:Primarily used for protecting cavities inside doors or in engine bays in all vehicles.
Terotex HV 350 Cavity Wax•Good creeping qualities•Minimal post dispense dripping•High temperature resistance•OEM specified
Applications:Primarily used for protecting cavities of motor vehicles. Ventilate cavities thoroughly after application. Use HV pressure cup for optimum application / protection.
Teroson® Cavity Spray•Excellent creeping properties•Minimal post dripping•High temperature resistance•OEM specified
Applications:Ideal for treating small isolated areas and touching up local spots after accident repairs. The extension spray tube allows to reach into open, visible cavities.
Product base Waxes and anti-corrosive agents Waxes and anti-corrosive agents Waterborne waxes and anti-corrosive agents Wax and polymers Rubber and resin Waterborne dispersion Zinc with epoxy agent
Volatile organic compound content 559 g/l 484.5 g/l < 1 g/l 582 g/l Approx 470 g/l Approx 0 g/l 720 g/l
Drive-away time (standard climate) After 2 – 3 hrs After 3 – 6 hrs After 3 – 6 hrs After 2 hrs After 2hrs After 3 hrs After 1 hr
Overpaintable (standard climate) n/a n/a n/a After 12 – 72 hrs After 12 – 72 hrs After 1 – 24 hrs n/a
Colour Beige-brown Beige-brown Beige-brown Black Black Black Silver-grey
Application / Equipment Cavity Conservation / Spray Cavity Conservation / HV Cup Gun Cavity Conservation / HV Cup Gun Underbody Coating / Spray Underbody Coating / Gun Underbody Coating / Gun Rust Protection / Spray
Practical Hints:
Pack sizes Part - IDH No.
Aerosol can 500ml 15027J - 664407
Pack sizes Part - IDH No.
Tin can 1L 17159B - 629358
Pack sizes Part - IDH No.
Tin can 1L 1335490 - 1335490
Pack sizes Part - IDH No.
Aerosol can 400ml 15818T - 601110
42 43
Terotex Record 2000 AquaTerotex Record 2000 Teroson® Zinc Spray
Terotex Record 2000 Aqua•VOC free, no solvent smell•No cracking in the cold•Compatible with most surfaces and
all OEM coatings•Very high solid content
Applications:Reproduction of all OEM textures for permanent car underbodies protection.
Terotex Record 2000•Compatible with painted parts and
phosphated metal•Compatible with all OEM coatings•OEM specified
Applications:Reproduction of all OEM textures for permanent car underbodies protection.
Teroson® Zinc Spray•Anti corrosion paint for vehicle body
repair and maintenance•Electrically conductive (wet and dry)•Not overpaintable
Applications:Serves as corrosion protection between welding flanges during MIG and spot welding. Used for vehicle bodywork repairs to galvanize welding joints.
Teroson® Underbody Coating Spray
Teroson® Underbody Coating Spray•Post-treatment of areas which are
hard to reach•Achieves fine spray pattern,
continuous coating even with thin films
•Fast drying•Non-sagging•Complements protective coatings
based on PVC or rubber/resin
Applications:Non-bituminous coating material, used mainly for underbody touch-up after accident repairs.
Product base Waxes and anti-corrosive agents Waxes and anti-corrosive agents Waterborne waxes and anti-corrosive agents Wax and polymers Rubber and resin Waterborne dispersion Zinc with epoxy agent
Volatile organic compound content 559 g/l 484.5 g/l < 1 g/l 582 g/l Approx 470 g/l Approx 0 g/l 720 g/l
Drive-away time (standard climate) After 2 – 3 hrs After 3 – 6 hrs After 3 – 6 hrs After 2 hrs After 2hrs After 3 hrs After 1 hr
Overpaintable (standard climate) n/a n/a n/a After 12 – 72 hrs After 12 – 72 hrs After 1 – 24 hrs n/a
Colour Beige-brown Beige-brown Beige-brown Black Black Black Silver-grey
Application / Equipment Cavity Conservation / Spray Cavity Conservation / HV Cup Gun Cavity Conservation / HV Cup Gun Underbody Coating / Spray Underbody Coating / Gun Underbody Coating / Gun Rust Protection / Spray
44
Body Repair – Underbody
Anti Chip Protection / Sound Deadening
•For professional use•For repair and maintenance
Product base Synthetic resins Synthetic resins Waterborne dispersion Bitumen / Plastic
Volatile organic compound content Approx 479.7 g/l Approx 479.7 g/l Approx 0 g/l n/a
Drive-away time (standard climate) After 3 hrs After 2 hrs After 3 hrs n/a
Overpaintable (standard climate) After 1 – 24 hrs After 1 – 24 hrs After 1 – 24 hrs n/a
Colour Light / Black White / Black Light Black
Application / Equipment Anti Chip Compound / Spray Anti Chip Compound / Underbody Coating Gun
Anti Chip Compound / Underbody Coating Gun Sound Protection
Terotex Super 3000•Quickly overpaintable with
solvent-based OEM paint•Compatile with metal and
PVC•Good abrasion resistance•OEM specified
Applications:For abrasion-resistant anti-corrosion and anti-chip coating on visible car parts which require fast over-painting.
Terodem SP300 •Deadening panels on vehicle
floor pans•Flexible when heated•Easy application
Applications:Conforms to body panel shapes when heated with a hot-air blower. Flows into ribbings and corners. Ideal for interior and undercarriage.
Teroson® Anti Chip Spray•Abrasion-resistant coating •Coating for painted parts
and phosphated metal•Allows fast over-painting
Applications:For treating small isolated areas and touching up local spots after accident repairs.
Teroson® Anti Chip Spray
Terotex Super 3000 Aqua•VOC free, no solvent smell•UV stable and overpaintable
wet-on-wet with waterborne paint
•Low shrinkage to cover large surfaces easily
•OEM specified
Applications:Abrasion resistant coating on visible car parts which require fast over painting. For OEM finish textures, bumpers and side panels.
Terodem SP300Terotex Super 3000 Terotex Super 3000 Aqua
Practical Hints:
•Shake spray cans thoroughly before application
•All underbody coatings from the Terotex Aqua range have an improved abrasion resistance and are also good for sound deadening
Pack sizes Part - IDH No.
LIGHT - Aerosol can 500ml 15564S - 740086
BLACK - Aerosol can 500ml 150024 - 740087
Pack sizes Part - IDH No.
WHITE - Tin can 1L 150016 - 629359
BLACK - Tin can 1L 142219 - 601081
Pack sizes Part - IDH No.
LIGHT - Tin can 1L 1335491 - 1335491
Pack sizes Part - IDH No.
Carton 4 mats 100 x 50cm 13429X - 629360
Equipment
45
Product LocatorLoctite® Product Locator• Handandeasytouse• Includesallworkshopneeds• Bonusmagneticproductlocator• Kiteasilypositionontoolboxes,
cabinets, workbenches, etcKit contains:Loctite 243 Best Ever 50ml, Loctite 263 Best Ever 10 ml, Loctite 290 10ml, Loctite 401 10ml, Loctite 518 50ml, Loctite 561 Stick 19g, Loctite 609 10ml, Blue Maxx Silicone 95g, Anti Seize Stick 19g
Dual Cartridge Hand GunManual hand gun for processing Teromix 6700 and Terokal 9225/9225 SF twin cartridges.
Terostat 9320 NozzlesFlat and wide stream nozzles for use with Terostat 9320 SF.
Teroson PowerLine II GunVery powerful air pressure gun for dispensing low to very high viscosity material from cartridges.
Additional Equipment
MRO KitLoctite® MRO Kit• LoctitesolutionsforeveryMROneed• Easytocarryandtransport• LockabletoolboxKit contains:Loctite 243 Best Ever 50ml, Loctite 263 Best Ever 50 ml, Loctite 268 Stick 19g, Loctite 401 10ml, Loctite 438 25ml, Loctite 515 50ml, Loctite 561 Stick 19g, Loctite 567 50ml, Loctite 569 50ml, Loctite 609 10ml, Loctite 680 50ml, Loctite 7471 133ml, Anti Seize Stick 19g, Freeze and Release 310gMetal Magic Repair 113g
Plastic Repair KitTeroson Plastic Repair KitContents• TerosonFLCleaner&Thinner• Terokal150PlasticPrimer• Terokal9225SF• TerosonPlasticFiller• TeromixHandGun• TeromixStaticMixerNozzles• TerosonMetalReinforcementStrips• Workinginstructions
Teroson Staku Hand GunPowerful and durable hand gun for dispensing material from cartridges.
Static MixersLarge nozzles for Terokal 5055Small nozzles for Teromix 6700, Terokal 9225/9225 SF.
Multi Press GunTelescopic air pressure gun for dispensing low viscosity sealants and adhesives as a bead and spray, e.g. Terostat 9320 SF.
Teroson Spray Bottle T900Compressed air sprayer for dispensing Teroson cleaner & diluents
Loctite® O Ring KitLoctite® O-Ring KitFor Inch-/Metric splicing• Kitformakingreplacements
O-rings on the spot• Easytohandle• Readyforuseinjustafewseconds• Thebondisasstrongastherubber
itselfKit contains:5 different sizes of nitrile rubber cord, splicing jig, safety knife, Loctite® 406 20g.
Product Part - IDH No.
MRO Kit MROKIT - 1575818
Product Part - IDH No.
Product Locator PRODLOC - 1598278
Product Part - IDH No.
Inch O-ring Kit 10361 - 473154
Metric O-ring Kit 16224 - 473153
Product Part - IDH No.
Plastic Repair Kit 1051637 - 1051637
Part - IDH No. 19551B - 142241 Part - IDH No. 96001 - 267452 Part - IDH No. 16765Y - 142240 Part - IDH No. 960304 - 960304
Product Part - IDH No.
Teroson Spray Bottle T900 10032E - 150037
Product Part - IDH No.
Flat Stream Nozzle 1305486 - 1305486
Wide Stream Nozzle 1470999 - 1470999
Door Skin Bead Nozzle 782222 - 782222
Wide Flat Nozzle 34914 - 744502
Product Part - IDH No.
Small Mixer Nozzle 98473 - 720227
Large Mixer Nozzle 780805 - 780805
Product Part - IDH No.
Cartridge Opener 34915 - 395397
Reinforcing Strips 13449T - 211703
Wool Dauber 14064M - 142245
46 47
Loctite® 15 Minute Radiator 175 g FMC1 354959 23
Loctite® 222 Low Strength Threadlocker 10 ml 19370 469052 10
Loctite® 222 Low Strength Threadlocker 50 ml 22250 231499 10
Loctite® 243 Medium Strength Threadlocker 10 ml 44088 1311374 10
Loctite® 243 Medium Strength Threadlocker 50 ml 44092 1311321 10
Loctite® 248 Medium Strength Threadlocker Stick 19 g 933728 933728 11
Loctite® 263 High Strength Threadlocker 10 ml 44280 1374240 11
Loctite® 263 High Strength Threadlocker 50 ml 44130 1331618 11
Loctite® 268 High Strength Threadlocker Stick 19 g 37775B 933730 11
Loctite® 290 High Strength Threadlocker 10 ml 45075 1495667 11
Loctite® 290 High Strength Threadlocker 50 ml 45076 1496855 11
Loctite® 3038 PO Bonder 50 ml 1571120 1571120 34
Loctite® 3038 PO Bonder 490 ml 42547 1574771 34
Loctite® 3805 Epoxy 56 g 24180 459312 34
Loctite® 401 Instant Adhesive 3 g 16704 547691 36
Loctite® 401 Instant Adhesive 25 ml 40124-25 265607 36
Loctite® 406 Instant Adhesive 25 ml 40633-25 265606 36
Loctite® 454 Instant Adhesive Gel 3 g 45404 233998 36
Loctite® 454 Instant Adhesive Gel 20 ml A045416 466862 36
Loctite® 480 Instant Adhesive 25 ml 16819-25 229394 37
Loctite® 5 Minute E-Pox-E Adhesive 25 ml EFQ5 354942 34
Loctite® 510 Gasket Eliminator 50 ml 45077 1496856 16
Loctite® 510 Gasket Eliminator 250 ml 45082 1496883 16
Loctite® 515 Master Gasket 6 ml 51517 209756 16
Loctite® 515 Master Gasket 50 ml 51531A 473169 16
Loctite® 515 Master Gasket 300 ml 33530 265605 16
Loctite® 518 Gasket Eliminator 6 ml 51817 209759 16
Loctite® 518 Gasket Eliminator 25 ml 51827 1329465 16
Loctite® 518 Gasket Eliminator 50 ml 19520 243271 16
Loctite® 518 Gasket Eliminator 300 ml 51845 135482 16
Loctite® 542 Thread Sealant 10 ml 25344 470771 12
Loctite® 542 Thread Sealant 50 ml 54294 1560050 12
Loctite® 561 PST Pipe Sealant Stick 19 g 943428 943428 12
Loctite® 567 Master Pipe Sealant 6 ml 56707 234451 13
Loctite® 567 Master Pipe Sealant 50 ml 33540 266308 13
Loctite® 569 Hydraulic/Pneumatic Sealant 50 ml 56950 234473 13
Loctite® 5699 Grey Maxx Silicone 95 g 34238 287301 19
Loctite® 5699 Grey Maxx Silicone 300 ml 18581A 473152 19
Loctite® 577 High Pressure Pipe Sealant 50 ml 19259 229930 13
Loctite® 587 Blue Maxx Silicone 95 g 34251 287442 19
Loctite® 587 Blue Maxx Silicone 300 ml 34237 287300 19
Loctite® 5900 Heavy Body Silicone 300 ml 20166 212184 18
Loctite® 5910 Black Maxx Silicone 50 g 39306 668698 19
Loctite® 5920 Copper Maxx Silicone 85 g 34249 287437 19
Loctite® 598 Black Maxx Silicone 95 g 39145 640172 19
Loctite® 609 Shaft Repair Retaining Compound 10 ml 19377 464829 14
Loctite® 609 Shaft Repair Retaining Compound 50 ml 30015 234551 14
Loctite® 620 Hi-Strength Hi-Temp Retaining Compound 50 ml 62050 234776 14
Loctite® 641 Bearing Mount 10 ml 45078 1496887 15
Loctite® 641 Bearing Mount 50 ml 45079 1496859 15
Loctite® 660 Quick Metal Press Fit Repair 6 ml 66010A 473167 15
Loctite® 660 Quick Metal Press Fit Repair 50 ml 66040 473166 15
Loctite® 680 High Strength Retaining Compound 50 ml 68050 234950 15
Loctite® 7070 ODC Free Cleaner 473 ml 20162 661976 25
Loctite® 7649 Activator 100 ml 22410A 991076 24
Loctite® 7471 Primer 133 ml 22477 1553340 24
Loctite® 770 PP Primer 100 ml 29520A 990067 24
Loctite® 790 Chisel Gasket Remover 510 g 79040 642664 25
Loctite® Blue RTV Gasket Maker 85 g 34248 287436 18
Loctite® Blue RTV Gasket Maker 300 ml 34247 287434 18
Loctite® Contact Adhesive & Trim Cement 148 ml 30537 1715477 35
Loctite® Control Instant Adhesive Gel 3 g 40778 799790 37
Loctite® Control Instant Adhesive Liquid 3 g 40779 799851 37
Loctite® Freeze and Release 310 g FAR 1024403 20
Loctite® Gasket Sealant #1 85 g 30511 473150 17
Loctite® Gasket Sealant #2 85 g 30514 473139 17
Loctite® Gasket Sealant #2 311 ml 30515 198819 17
Index
By product name
Product description Pack Size
Part number IDH code Page Product description Pack
SizePart
number IDH code Page
46 47
Loctite® Gasket Sealant #3 50 ml 3JB 476031 17
Loctite® Gasket Sealant #3 50 ml 3JA 476032 17
Loctite® Gasket Sealant #3 473 ml 30516 661977 17
Loctite® Gasket Sealant #4 50 ml 4J 476033 17
Loctite® Hand Wipes 75 pck 34943 337637 27
Loctite® Hand Wipes 130 pck 34944 337638 27
Loctite® Hi Temp Red RTV Silicone Gasket 85 g 34243 287421 18
Loctite® Hi Temp Red RTV Silicone Gasket 300 ml 34244 287425 18
Loctite® High Temp Repair Bandage 106 cm HTB2 476026 22
Loctite® Inch O-Ring Kit - 10361 473154 45
Loctite® Instant Gasket 190 ml 40479 899129 18
Loctite® Metal Magic Stick 113 g 98853 645440 35
Loctite® Metric O-Ring Kit - 16224 473153 45
Loctite® Moly Dry Film 340 g 39895 473134 21
Loctite® MRO Kit - MROKIT 1575818 45
Loctite® Muffler & Tailpipe Bandage 125 cm MB1 476017 22
Loctite® Muffler Putty 200 g MP2 476015 23
Loctite® Natural Blue 709 ml 82249 235502 25
Loctite® Natural Blue 3.78 L 82251 209804 25
Loctite® Non-Chlorinated Parts Cleaner 420 g 30545 1506652 25
Loctite® Product Locator Kit - PRODLOC 1598278 45
Loctite® Radiator & Petrol Tank Repair 20 g RPK1 354947 23
Loctite® Rear View Mirror Bonder 1.2 ml MA2 354940 31
Loctite® Rear View Mirror Bonder II 0.5 ml MA3 476018 31
Loctite® Silicone Spray 290 g 24787 231009 21
Loctite® Silver Anti Seize Stick 20 g 944870 944870 21
Loctite® Solvo-Rust Super Penetrating Oil 368 g 81252 473164 20
Loctite® Strong E-Pox-E Adhesive 25 ml EGQ7 354941 35
Loctite® Super Glue Original 3 ml SG3 476012 37
Loctite® Super Glue Xtra Gel 3 g SGX3 476011 37
Loctite® White E-Pox-E Ribbon Putty 39 g WER2 216005 35
Teroson® Adhesive Spray 400 ml 15787K 661974 33
Teroson® Anti-Chip Spray Black 500 ml 150024 740087 44
Teroson® Anti-Chip Spray Light 500 ml 15564S 740086 44
Teroson® Cavity Spray 500 ml 15571A 882486 42
Teroson® FL Cleaner & Thinner 1 L 92679 601097 39
Teroson® Plastic Filler 920 g 882485 912272 39
Teroson® Plastic Repair Kit - 1051637 1051637 39/45
Teroson® Terodem SP300 4 mats 13429X 629360 44
Teroson® Terodicht Elastic 310 ml 12879Z 800673 31
Teroson® Terokal 150 150 ml 10985Q 629356 39
Teroson® Terokal 5055 250 ml 1358254 1512156 33
Teroson® Terokal 9225 50 ml 10991X 629355 38
Teroson® Terokal 9225 Super Fast 50 ml 882088A 912812 38
Teroson® Teromix 6700 50 ml 17034Q 642666 33
Teroson® Terostat 8519P Primer 100 ml 1520836 1520836 30
Teroson® Terostat 8560 AC-25 1 L 1557872 1557872 30
Teroson® Terostat 8597 HMLC 310 ml 1548592 1548592 31
Teroson® Terostat 8597 HMLC 570 ml 1547937 1547937 31
Teroson® Terostat 8630 2K 310 ml 915287 915287 31
Teroson® Terostat 9097 PL HMLC 310 ml 1535434 1535434 30
Teroson® Terostat 9120 Super Fast Grey 310 ml 1358216 1358216 32
Teroson® Terostat 9120 Super Fast White 310 ml 1358213 1358213 32
Teroson® Terostat 9220 310 ml 10641R 265673 33
Teroson® Terostat 9320 Black 300 ml 13916B 211743 32
Teroson® Terostat 9320 Ochre 300 ml 13917C 272232 32
Teroson® Terostat 939 Black 570 ml 13682X 100145 32
Teroson® Terostat 939 Grey 570 ml 13696M 197363 32
Teroson® Terostat 939 White 570 ml 14652B 212653 32
Teroson® Terotex HV 350 Cavity Wax 1 L 793958 868519 42
Teroson® Terotex HV 450 Aqua 1 L 1335488 1335488 42
Teroson® Terotex Record 2000 1 L 17159B 629358 43
Teroson® Terotex Record 2000 Aqua 1 L 1335490 1335490 43
Teroson® Terotex Super 3000 Aqua 1 L 1335491 1335491 44
Teroson® Terotex Super 3000 Black 1 L 142219 601081 44
Teroson® Terotex Super 3000 White 1 L 150016 629359 44
Teroson® Underbody Coating Spray 500 ml 15027J 664407 43
Teroson® Zinc Spray 400 ml 15818T 601110 43
Yuk Off® Brake & Parts Cleaner 417 g 24441 230824 26
Yuk Off® Bumper & Tyre Sheen 350 g Y182 300685 27
Yuk Off® Carb & Throttle Body Cleaner 340 g 24790 231015 27
Yuk Off® Orange Hand Cleaner 400 ml 31908 366943 27
Yuk Off® Orange Hand Cleaner 4 L 31909 367218 27
Yuk Off® Orange Hand Cleaner 15 L 31910 367217 27
Yuk Off® Super Degreaser 400 g Y101 300684 26
Product description Pack Size
Part number IDH code Page Product description Pack
SizePart
number IDH code Page
Henkel – The Solution ProviderTruly Integrated, Truly International
Henkel is a world-wide operating, market-driven specialist in brands and technologies with affiliates in over 75 countries, providing technology competence from one single source. People in 125 countries around the world trust in brands and technologies from Henkel. The portfolio includes adhesives and sealants, products for direct glazing, corrosion protection, underbody and anti chip coating, sound deadening solutions, body care and many other speciality chemicals.
Strong brands with proven and trusted names, such as Loctite® and Teroson, are incorporated into this common platform and have long been the key to Henkel’s success.
Around the world, Henkel has an extensive commitment to motor sports where reliable performance must be delivered in the most extreme conditions. As Official Partner and Supplier to the Dakar Rally for several years, Henkel has supported the competing teams with products that reflect the company’s innovation and technological excellence. Over the years, close contacts have developed into a strong relation of mutual trust and understanding. This has been built on the competent service and the high-quality adhesives and sealants offered for fast and efficient repairs which have helped many drivers to make it to the finish line.
Henkel offers much more than outstanding products, it provides solutions to many of the biggest challenges – and to the problems that you face in ensuring reliability, safety and durability.
We’re here to ensure that you receive all the help and support you need. Just contact us!
For more information on the complete range of Loctite® and Teroson products from the Henkel portfolio, please visit www. loctite. com, where you can download catalogues, data sheets, technical papers and application examples.
Meets all Needs
The data contained herein is intended as reference only. Please contact your local Henkel subsidiary for assistance and recommendation on specifications and applications of these products. ® All trademarks, except where otherwise noted, are the property of or used underlicense by Henkel Corporation.©Copyright 2013, Henkel Australia Pty Ltd. All rights reserved ART1003C IDH 1526409
Henkel New Zealand Ltd.PO Box 58 493, Botany Manukau, Auckland 2163New ZealandTel: +64 (09) 272 6710 Fax: +64 (09) 272 6711www.loctite.co.nz
Henkel Australia Pty. Ltd.135-141 Canterbury Road,Kilsyth, Victoria, 3137Phone: 1300 88 555 6www.loctite.com.au
If you would like more information on Loctite products please scan using your smartphone for more catalogues.
Recommended