Soltec Rolo K

www.soltec.si

KK73K93

K110SKY

Balance of light and shade.

Shutters

Sun Protection Systems

Technical catalogue

K

2

H

89

82

Shutters

TEchnical catalogue / Shutters / K

Shade name: Shutter K

ID No.: SOL K73 - 001SOL K93 - 001SOL K110 - 001

Drive: Motor

Cartridge: Cartridge 73Cartridge 93Cartridge Ø 110

Guides: Alu

Assembling: Onto the window

Dimensions: Maximum width is 500 cm, height depends in this case on maximum surface of linen being 16 m2.

Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or

individual switch;• group control by means of a switch and/or individually

over remote control;• control in connection with sensors such as: wind/sun/

time/rain sensor;• control in connection with a computer (»smart house«

system).

Exterior Soltec screen shutter type K with a Φ50 Alu roller axle or Φ7mm galvanized steel axle. Weighting profile Φ20mm is equipped with a weight and guide. Alu cartridge 73, 93 or Φ110 depends on shutter dimensions. 18/30mm Alu guides are powder painted in RAL. Shutter assembling is performed by installing cartridge steel brackets onto the window frame. The linen is external, color can be chosen. Driven by motor.

Design description

Shutter K - Motor drive

Shade name Shutter K73

ID No. SOL K73 - 001

Drive Motor

3

H

112

102

H

118

133

Technical cataogue / Shutters / K

Sun Protection Systems

Shade name Shutter K110

ID No. SOL K110 - 001

Drive Motor

Shade name Shutter K93

ID No. SOL K93 - 001

Drive Motor

K

4

H

89

80

Shutters

TEchnical catalogue / Shutters / K

Shade name: Shutter K

ID No.: SOL K73 - 002SOL K93 - 002SOL K110 - 002

Drive: Manual - windlass

Cartridge: Cartridge 73Cartridge 93Cartridge Ø 110

Guides: Alu

Assembling: Onto the window.

Dimensions: Maximum width is 500 cm, height in this case depends on maximum surface of linen being 16 m2 and on cartridge magnitude.

External Soltec screen shutter type K with a Φ43 mm or Φ70mm galvanized steel roller axle. Weighting profile Φ20mm is equipped with a weight and guide. Alu cartridge 73 or 93 or Φ110 -depends on shutter dimensions. Alu guides 18/30mm are all powder painted in RAL. Shutter assembling is performed by installing cartridge steel brackets onto the window frame. The linen is external, color can be chosen. Driven by windlass.

Design description

Shutter K - Manual drive (windlass)

Shade name Shutter K73

ID No. SOL K73 - 002

Drive Manual - windlass

5

H

112

103

H

133

118

Technical cataogue / Shutters / K

Sun Protection Systems

Shade name Shutter K93

ID No. SOL K93 - 002

Drive Manual - windlass

Shade name Shutter K110

ID No. SOL K110 - 002

Drive Manual - windlass

K

6

H

60

89

80

Shutters

TEchnical catalogue / Shutters / K

Shade name: Shutter K

ID No.: SOL K73 - 003SOL K93 - 003SOL K110 - 003

Drive: Motor

Cartridge: Cartridge 73Cartridge 93Cartridge Ø 110

Guides: Inox braided cable 3 mm

Assembling: Onto the window

Dimensions: Maximum width is 500 cm, height depends in this case on maximum surface of linen being 16 m2 and on cartridge magnitude.

Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or

individual switch;• group control by means of a switch and/or individually

over remote control;• control in connection with sensors such as: wind/sun/

time/rain sensor;• control in connection with a computer (»smart house«

system).

External Soltec screen shutter type K with Φ50 Alu roller axle or Φ70mm axle made of galvanized steel. Weighting profile Φ20mm is equipped with a weight and guide. Alu cartridge 73 or 93 or Φ110, depends on shutter dimensions. Guides of Inox braided cable Φ3mm are fixed with Alu brackets onto the window frame. Shutter assembling is performed by installing cartridge steel brackets onto the window frame. The linen is external, color can be chosen. Driven by motor.

Design description

Shutter K

Shade name Shutter K73

ID No. SOL K73 - 003

Drive Motor

7

60

H

112

103

H

60

133

118

Technical cataogue / Shutters / K

Sun Protection Systems

Shade name Shutter K93

ID No. SOL K93 - 003

Drive Motor

Shade name Shutter K110

ID No. SOL K110 - 003

Drive Motor

K

8

H

80

89

60

Shutters

TEchnical catalogue / Shutters / K

External Soltec screen shutter type K with Φ 43mm Alu roller axle or galvanized steel axle Φ 60mm. Weighting profile Φ20 mm is equipped with a weight and guide. Alu cartridge 73 or 93 or Φ110, depends on shutter dimensions. Guides made of Inox braided cable Φ 3mm are fixed with Alu brackets onto the window frame. Shutter assembling is performed by installing cartridge steel brackets onto the window frame. The linen is external, color can be chosen. Driven by windlass.

Shade name: Shutter K

ID No.: SOL K73 - 004SOL K93 - 004SOL K110 - 004

Drive: Manual - windlass

Cartridge: Cartridge 73Cartridge 93Cartridge Ø 110

Guides: Inox braided cable 3mm

Assembling: Na okno

Dimenzija: Maximum width is 500 cm, height in this case depends on maximum surface of linen being 16 m 2 and on cartridge magnitude.

Krmiljenje: Over windlass

Design description

Shutter K

Shade name Shutter K73

ID No. SOL K73 - 004

Drive Manual - windlass

9

H

60

112

103

H

133

118

60

Technical cataogue / Shutters / K

Sun Protection Systems

Shade name Shutter K93

ID No. SOL K93 - 004

Drive Manual - windlass

Shade name Shutter K110

ID No. SOL K110 - 004

Drive Manual - windlass

K

10

Shutters

TEchnical catalogue / Shutters / K

Shade name: Shutter K

ID No.: SOL K73 - 005

Drive: Motor

Cartridge: Alu 73

Guides: No

Assembling: Into the ceiling

Dimensions: Maximum width is 300 cm, height depends on cartridge magnitude.

Interior Soltec screen shutter type K with Φ50mm Alu roller axle or Φ70mm galvanized steel axle. Weighting profile Φ20mm is equipped with a weight and guide. Alu cartridge 73 or 93 or Φ110, depends on shutter dimension. Shutter assembling is performed by installing cartridge steel brackets into the ceiling. The linen is internal from the ST, SA, S group, color can be chosen. Driven by motor.

Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or

individual switch;• group control by means of a switch and/or individually

over remote control;• control in connection with sensors such as: wind/sun/

time/rain sensor;• control in connection with a computer (»smart house«

system).

Design description

Shutter K

11

80

89

Technical cataogue / Shutters / K

Sun Protection Systems

Shade name Shutter K73 - internal

ID No. SOL K73 - 005

Drive Motor

K

12

80

89

Shutters

TEchnical catalogue / Shutters / K

Shade name: Shutter K

ID No.: SOL K73- 006

Drive: Manual - windlass

Cartridge: Alu 73

Guides: No.

Assembling: Into the ceiling..

Dimensions: Maximum width is 300 cm, height depends on cartridge magnitude.

Interior Soltec screen shutter type K with Φ43 mm or Φ70 mm roller axle made of galvanized steel. Weighting profile Φ20mm is equipped with a weight and guide. Alu cartridge 73 or 93 or Φ110, depends on shutter dimensions. Shutter assembling is is performed by installing cartridge steel brackets onto the ceiling. The linen is internal from the ST, SA, S group, color can be chosen. Driven by windlass. Option with removable windlass is also available.

Design description

Shutter K

Shade name Shutter K73 - internal

ID No. SOL K73 - 006

13

89

80

Technical cataogue / Shutters / K

Sun Protection Systems

Shade name: Shutter K

ID No.: SOL K73 - 007

Drive: Chainlet

Cartridge: Alu 73 mm

Guides: No

Assembling: Onto the window or into the ceiling

Dimensions: Maximum width is 300 cm, height depends on cartridgemagnitude.

Interior Soltec screen shutter type K with a roller Alu Φ 36mm axle. Weighting profile is Φ15mm. Alu cartridge is 73. Shutter assembling is performed by installing cartridge steel brackets onto the ceiling or onto the window. The linen is internal from the ST, SA, S group, color can be chosen. Driven by chainlet.

Design description

Shutter K

Shade name Shutter K73 - internal

ID No. SOL K73 - 007

Drive Chainlet

K

14

Shutters

TEchnical catalogue / Shutters / K

Shade name: Shutter Sky

ID No.: SOL SKY - 008

Drive: Motor

Cartridge: Alu Ø 110 mm

Guides: Inox braided cable 10 mm

Assembling: In front of the facade.

Dimensions: Maximum width is 200 cm, height 400 mm.

Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or

individual switch;• group control by means of a switch and/or individually

over remote control;• control in connection with sensors such as: wind/sun/

time/rain sensor;• control in connection with a computer (»smart house«

system).

External Soltec screen shutter type Sky with Φ50 roller Alu axle. Weighting profile Φ40mm is equipped with a steel weight. Alu cartridge Φ110mm is fixed over Inox sides, onto the Inox braided wire Φ 10 mm, which are fixed into the construction of a building in front of the facade and does not touch the facade at all. In this way the shutter system creates a new facade and shape of the building. The linen is outside, color can be chosen. Driven by motor.

Design description

Shutter SKY

15

115

H

Technical cataogue / Shutters / K

Sun Protection Systems

Shade name Shutter SKY

ID No. SOL SKY - 008

Drive Motor

Soltec - Sun Protection Systems, MIPO d.o.o., Obrtna ulica 9, 8257 Dobova, Slovenia

t +386 (0)7 45 22 126, f +386 (0)7 45 22 128, e info@soltec.si, www.soltec.si

Balance of light and shade.