Solid Work Manual Stuffing Box

SOLID WORK MANUAL

HORIZONTAL STUFFING BOX

Prepared by : K. Dharma Senthil

Cell : 9842798539

E Mail : kd_senthil007@yahoo.co.in

Solidwork Manual 1 Prepared by K.Dharmasenthil

STUFFING BOX

Experiment: Date:

When a sliding or rotating rod passes through a cylinder, containing fluid under

pressure, to prevent the leakage of fluid along the sliding or rotating rod, a stuffing box is used. A

good stuffing box should allow free movement of the rod with practically no leakage of the fluid.

Stuffing box is used in steam engines, reciprocating pump, centrifugal pumps, valves

The stuffing box body is cast as part of either cylinder end or cylinder cover. The top

flange is elliptical. The space around the piston rod is filled with packing material. The packing is

compressed by a cast n gland which is forced down by means of two collar studs and nuts. e gland

is lined with a brass bush and a neck bush is inserted in the stuffing box. The ends of the bushes

are beveled. By doing so, the packing made to press tightly against the rod. An oil cup is formed on

the top of the gland to lubricate the rod.

Create the Body

New part.

Click New , or click File, New on the Standard toolbar. Click the Part Icon form the

New SolidWorks Document dialog box, and click OK.

Filing a part.

Using the Save option from the File menu or selecting the Save button on the

Standard toolbar, file the part under the name Body. The extension, *.sldprt, is added

automatically. Click Save.

Change the Name Body

1. Select the sketch plane.

1, Insert a new sketch and choose the Front Plane.

2, Choose the Normal To Icon.

3, Draw the Center Line

4, Draw the given sketch

5, Change the dimension

Step 1

Step 2

Step 3

Step 4

Step 5

6, After finish the sketch and click the Return Icon

7, Click Features and select Boss/Base, Revolve... from the Insert menu.

8, Choose the Revolved Axis Line in the sketch.

The Property Manager appears with the defaults end condition.

One Direction

Angle 360

9, Click OK

10, Finished Feature and Save the Part

The Solid Revolved Feature is created as the first feature of the parts

1, Insert a new sketch

2, Click the Standard view – Left side view.

3, Select the Left view as Work Plane

4, Draw the Circle as per Dimension on the Work Plane

Step 1 Step 25, Completed the sketch and click OK

6, Click the Return Icon

Work Plane

7, Change the Isometric view

8, Click Features and select Extruded Cut from the Insert menu.

9, Select the Circle

10, Display the Cut Extrude – Direction 1 – Blind – Depth 25mm

11, Click OK

Select the Circle

12, Save the Part…

3. Create the Axis.

1, Choose the Menu Tool Bar – Insert – Reference Geometry - Axis

2, Click the Circular Surface

3, Click OK

4. Create the Circular Pattern.

1, Choose the Menu Tool Bar – Insert – Pattern/Mirror – Circular Pattern

2, Select the Axis line

3, Enter the number of Hole (No. of 3)

4, Click the Equal Spacing

Axis Line

Circular Surface

5, Click the Features to Pattern Box

6, Select the Hole

7, After Display the 3 Hole than Click OK

8, Finishing Feature

9, Save the Part…

Create the Gland

New part.

Filing a part.

Standard toolbar, file the part under the name Gland. The extension, *.sldprt, is added

Change the Name Gland

5,Change the Dimension

Step 1 Step 2

Step 3 Step 4

One Direction

Angle 360

9, Click OK

The Solid Revolved Feature is created as the first feature of the parts

1, Insert a new sketch

2, Click the Work plane.

3, Choose the Normal To Icon

4, Draw the Circle as per Dimension on the Work Plane

Step 1 Step 2

5, Completed the sketch and click OK

6, Click the Return Icon

8, Click Features and select Extruded Cut from the Insert menu.

Work plane

10, Display the Cut Extrude – Direction 1 – Blind – Depth 25mm

11, Click OK

12, Save the Part…

Select the Circle

3. Create the Axis.

1, Choose the Menu Tool Bar – Insert – Reference Geometry - Axis

2, Click the Circular Surface

3, Click OK

4, Save the part..

Circular surface

4. Create the Circular Pattern.

1, Choose the Menu Tool Bar – Insert – Pattern/Mirror – Circular Pattern

2, Select the Axis line

3, Enter the number of Hole (No. of 3)

4, Click the Equal Spacing

5, Click the Features to Pattern Box

6, Select the Hole

Axis line

7, After Display the 3 Hole than Click OK

8, Finishing Feature

9, Save the Part…

10, Close the window

Create the Gland Bush

New part.

Filing a part.

Standard toolbar, file the part under the name Gland Bush. The extension, *.sldprt, is

added automatically. Click Save.

Change the Name Gland Bush

5, Change the Dimension

Step 1 Step 2

Step 3

Step 4

Axis line

One Direction

Angle 360

9, Click OK

11, Close the Window

Create the Neck Bush

New part.

Filing a part.

Standard toolbar, file the part under the name Neck Bush. The extension, *.sldprt, is

Change the Name Neck Bush

Step 1 Step 1

Step 36, After finish the sketch and click the Return Icon

One Direction

Angle 360

9, Click OK

Axis Line

Create the Piston Rod

New part.

Filing a part.

Standard toolbar, file the part under the name Piston Rod. The extension, *.sldprt, is

3, Draw the Rectangle

Change the Name Piston Rod

One Direction

Angle 360

9, Click OK

10, Finished Feature

and Save the Part

Axis Line

Create the Collar Stud M20

New part. ( Only Working in Tutorial window )

Filing a part.

Standard toolbar, file the part under the name Collar Stud M20. The extension, *.sldprt,

is added automatically. Click Save.

1, Insert a new sketch and choose the Right Plane.

3, Draw the Rectangle

Axis Line

One Direction

Angle 360

9, Click OK

3. Create the Fillet.

1, Choose the Menu Tool Bar – Insert – Features – Fillet / Round

2, Select the Fillet Edge and Radius 5mm

3, Click OK

4, Save the Part..

3. Create the Thread

1, Choose the Menu Tool Bar – Insert – Annotations – Cosmetic Thread

2, Click the Circular Edge

Circilar Edge

Fillet Edge 1

Fillet Edge 2

3, Display the Cosmetic Thread – Thread Setting - Blind – Length- 25 mm (D)

4, Click OK and Save

2, Click the Circular Edge

3, Display the Cosmetic Thread – Thread Setting - Blind – Length- 82 mm (D)

4, Click OK and Save

5, Close the window

Circular Edge

Create the Nut M20

New part. ( Only Working in Tutorial window )

Filing a part.

Standard toolbar, file the part under the name Nut. The extension, *.sldprt, is added

1, Insert a new sketch and choose the Right Plane.

3, Choose the Menu Tool Bar – Tools – Sketch Entities – Polygon

3, Select the Polygon

4, Click the Origin Point form the Sketch window

Origin Point

5, Pick and Moving the Mouse Display the Polygon in the window

Pick the any point

6, Enter the value

a) No. of Side = 6

b) Circle diameter = 30mm

4, Click OK

4, After Finishing Sketch and click the Return Icon

5, Click Features and select Extrude from the Insert menu

Circle Diameter

6, Select the any Line the Sketch

7, Extrude Length 16mm

1, Insert a new sketch and choose the Working Plane.

3, Draw the Circle with Diameter 18mm

5, Click Features and select Extrude Cut from the Insert menu

Working Plane

7, Display the Extrude Box – Direction 1 – Through All

8, Click OK

10, Finish the Part and Save the Part.

Front Plane

3, Change the view for Hidden view

4, Choose the Line

5, Draw the given Sketch

Draw the Single Line Draw the Angle Line Close the Line

Center line

7, After finish the Sketch and Click the Return Icon

8, Change the view for Isometric view

9, Click Features and select Revolved cut from the Insert menu

10, Select the Center Line

19, Click OK and Save the Part..

20, Change the Shaded with Edges view

2, Select the Circular Edge

Circular Edge

3, Change the Up to Next and Dia 16mm from the Thread Setting Box

4, Click OK

5, Save the Part…

6, Close the window

Solid Work Manual Stuffing Box

Documents

Angle Body Piston Valves - The Valve · PDF fileAngle Body Piston Valves ... Optimization of the fluid flow path. STUFFING BOX ... Stuffing Box Seal PTFE PTFE Chevron PTFE Chevron

L-4400 COMPLETECROSSHEAD PIN PISTON ROD ASSEMBLY CROSSHEAD GDE. GASKET CROSSHEAD GUIDE ROD VEE PACKING SET WASHER PACKING SPRING STUFFING BOX GASKET OUTBOARD STUFFING BOX HEX NUT

Do’s AnD Don’ts - aar.org · Stuffing Box Cover Valve Rod Remove the stuffing box cover; invert the stuffing box cover and fit onto the valve rod for use as a valve operating

Upper Sheave Stuffing Box Typical Wireline Rig-upoilproduction.net/files/George King - Slickline_Basics.pdf · Typical Wireline Rig-up. Wireline Unit. Stuffing Box. Lubricator. swab

Centrifugal Pumps With Stuffing Box or Mechanical Seal M05499 M

Manufacturing of Stuffing box

WIRELINE STUFFING BOX AND HAY PULLEY - GKD … · WIRELINE STUFFING BOX AND HAY PULLEY ... • Quick union standard, ... Weight Dimensions - inch (mm) Weight Aluminium Sheave Composite

RAPID PROJECTOR PROYECTOR RAPID … · • 1” 1/2 adaptor • Installation and maintenance manual • Stuffing box hose • Manual for electrical ... solid bodies and humidity)

bckpg1 - SealPro Industrial Maintenance, Gasket Material ... · HOW COMPRESSION PACKINGS WORK ... liquid, solid or ... PACKING MANUAL a coil of packing into a stuffing box. Rings

STUFFING BOX SEALING SOLUTIONS STEAMRYT* Soot Blower

Rod Knuckle Stuffing Box Servicing Procedures · Rod Knuckle Stuffing Box Servicing Procedures. 1. On a conventional pump jack shut the jack down sothe horse’s head is at the top

FCC Valve Stuffing Box - Refining Community · 2018. 8. 23. · Stuffing Box Design ‣ Proper behavior of the Stuffing Box is ensured by a continuous purging (Steam, N2, Plant Air)

Presaestopa-Johnson Stuffing Box

Stuffing Box - Double E, Inc.€¦ · Stuffing Box *Double E has numerous Stuffing Box models with other configurations. Contact a Double E representative for your specific requirements

VERTICAL TURBINE PUMPS · 15 Stuffing Box Split Gland Water Lube Aluminum Bronze–ASTM B148HT 16 Stuffing Box Slinger Water Lube Rubber 17 Packing Graphited Acrylic Yarn 18 Column

Series e-1510 - Xylem Applied Water · 2020. 5. 14. · The Series 1510 pump is furnished in a “Standard Seal” or “Stuffing Box” construction. The “Stuffing Box” model

Polished Rod Clamp Rod Rotator Stuffing Box Pumping · PDF fileWellhead Systems Inc. Pumping and Polished Rod Accessories Rod BOP Pumping Tee Stuffing Box Rod Rotator Polished Rod

SHAFT SEALING SYSTEMS Duramax Ultra-X · Transfers frictional heat to stuffing box. Duramax® Ultra-X® dissipates frictional heat from the shaft transferring it to the stuffing box,

THE STUFFING BOX - Chesapeake Bay ACBS...STUFFING BOX Editors Notes January 2015 Your Board of Directors is very enthusiastic about our upcoming year.We all are making suggestions

Stuffing box