View
214
Download
0
Category
Preview:
Citation preview
Revision No. Issue No. : 02Dt of Revision Issue Dt. : 30.06.2003Page No. Issued by : P ASection Document : PPMTopic
Sl.No Particulars Qty Unit Rate in
Rupees
Total Amount in
Rupees
1 Design, Supply, Installation, Integration, Application
development/Customization and Commissioning of
“Automation of Tower Testing Operation” consisting of
PLC/SCADA package and all the soft wares of the
operating system (Licensed) with suitable “Distributed
I/O system”.
----
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
FORMAT NO.:CPRI/PUR/℮PBID/IND
: 04: 25.07.2017: 1 of 2
3) The bidders shall not submit the offer on "HIGH SEA SALES." The same shall be rejected if submitted on HIGH SEA
SALES.
: Formats: e-Tender Price Bid Document for Indigenous offer
CENTRAL POWER RESEARCH INSTITUTE, BENGALURU Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2207 2010
Quotation Number and Date
HSN code (Harmonized system nomenclature)
Section I(A)-Price Bid for Indigenous offer
Tender Enquery No: CPRIBLR18MED10bC145Description of the Equipment/Goods/Services : Upgradation of existing Test Control System of Tower Testing Station
(TTS) to computerised test system
Note : 1) The Offers should be submitted in this format only otherwise shall be rejected.2) All blue fields are mandatorily to be filled in.
Name Of Bidder
GSTIN No
4) The GSTIN No., HSN Code and SAC code (Services Accounting Code) are mandatory, should be provided.
SAC code (Services Accounting Code)
NOTE: Bidders should quote for all the items, part offer will be rejected.
Value of the complete system for SPECIFICATION FOR UPGRADATION OF
EXISTING TEST CONTROL SYSTEM OF TOWER TESTING STATION (TTS) TO
COMPUTERISED TEST SYSTEM (Inclusive of Packing & Forwarding Charges)
Insurance is under Supplier's Scope is as follows:-
The Tower Testing Station (TTS) of CPRI Bengaluru established during 1976
under Ministry of Power, Govt. of India and functions as a premier third party
testing/ certification body for transmission line towers/structures as per
National/International Standards. At present the Tower Testing Station is
operated by manual control/operation. To meet the global competitiveness in the
field of tower testing, it is required to make the existing system as
completely/Fully computer controlled automatic closed loop system.
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
1.1 General/Overall Methodology of computerized tower test
system: The existing system (as explained in Enclosure - 1, of
independent load application, control and monitoring system
(Load measurement) has to be made closed loop system with
the combined solution of visualising, data processing
communication, monitoring, control & report preparation from
central place with AUTO/ SEMI-AUTO of load application with
an option of selecting either of them or both during the process
of testing, single action emergency stop of all the loading
process & releasing of loads as per the pre-set program/action
control through Industrial Grade Panel PC, PLC with SCADA &
MMI and remote I/O stations as per the loading chart (Rigging
chart & related reference values through electronic files) by
integrating the load cells for controlling 48 Nos. of electrically
operated winches & extendable to 60 points (for load
application) located in the field (Enclosure -1) and integrating
all the Load measuring instruments, UTM, Theodolites, Strain
gauge recorder as per the pre-set application program for
tower testing (Refer Flow Diagram related to testing as given in
page 13 of 14) from central control & monitoring system with
sufficient battery backup and shall generate the report as per
the customized format & also with graphical representation
wherever necessary.
-----
2 Supply and installation of AC Variable Frequency Drive (VFD) &
Conversion of existing electrical winches (Dual Speed & Single
Speed) to VFD operating winches with related drives/Hardware
& controls/ control panel/s with safety relays (overload/phase
sequence/ELCB etc.,) with a provision for manual operation at
Winch houses and at control room for remote operation for
both forward, stop & reverse operation with requisite speed
selection.
VFD shall be suitable for Load application of 5t SWL & with over
load of 7.5t without any slip & shall have speed control from 0
to 4m/min for Ruby make winches and 0 to 2.1m/min for
remaining winches with a provision to operate manually during
power supply outage. VFD Panels (rodent free) to be located at
respective winch houses.. The signal /communication cable
from control room to winch houses shall be routed in the
suitable GI conduit/pipe.
All these winches have to be interfaced with SCADA System with
related inter & intra panel wiring/termination between remote
& local control panels etc.,
a) Transverse Direction (175m (approx) away from the control
room)18 nos
0.00
2(a) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
b) Longitudinal Direction (250m (approx) from the control
room)18 nos
0.00
2(b) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
SGST 0.00
UTGST 0.00
CESS if any 0.00
c) Vertical Direction (200m (approx) from the control room) 14 nos0.00
2(c) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
d) Provision to be made for placing/mounting additional VFDs
in the VFD panels with related hardware/ Termination (without
power source) etc.,
--
i) Transverse side 2 nos 0.00
2(d)(i) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
ii) Longitudinal side 6 nos 0.00
2(d)(ii) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
iii) Vertical side 2 nos 0.00
2(d)(iii) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
2.1 Supply & Installation of BCH make AC solenoid brake shoe assembly
with brake coil/s for continuous & intermittent operation replacing for
the winches having Industrial Syndicate make brakes including
necessary spares/minor modifications if required at Transverse &
Longitudinal winch houses.
--
i) Brake shoe assembly with brake coil 31mm stroke
a) For existing Brake drum size: 6”/152mm dia. & related works) 10 nos 0.00
2.1(i)(a) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00b) For Brake drum size: 5.5”/139.7mm dia. with Brake drum & related
works)10 nos 0.00
2.1(i)(b) GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
SGST 0.00
UTGST 0.00
CESS if any 0.00
c) For existing Brake drum size: 8”/ 203mm dia. & related works) 10 nos 0.00
2.1(i)(c) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00d) For Brake drum size: 7”/177.8mm dia. with Brake drum & related
works) 10 nos 0.00
2.1(i)(d) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
ii) Supply of Spare Brake Coil (415 V, 50Hz AC) 6 nos 0.00
2.1(ii) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
2.2 Servicing of Existing winches for brake alignment, changing of brake
coils & brake shoes/liners, degreasing, greasing, refilling gear oil etc.,52 nos
0.00
GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
3 Servicing & Conditioning of Existing tension type Load cells (including
re-gauging for which ever necessary with calibration & submission of
NABL accredited lab certificate)
--
a) 50 tonne capacity 4 nos 0.00
3(a) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
b) 20 tonne capacity 50 nos 0.00
3(b) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
c) 10 tonne capacity 9 nos 0.00
3(c) GST rate as applicable in percentage onlyCGST 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
d) 5 tonne capacity 9 nos 0.00
3(d) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
3.1 a)Supply of Suitable Signal conditioners placed in the control room for
above load cells (60 Pull of Points(POP) to communicate with PLC &
SCADA system with all the necessary hardware & associated control
Panels and related inter & intra panel wiring between remote & local
control panels etc.,
60 nos
0.00
3.1(a) GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00b) Panels to accomadate signal conditioners 1 nos 0.00
3.1(b) GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
3.2 Dismantling of existing remote control panel at control room- 1 no,
Panels : Transverse - 2 nos., Longidutinal - 2 nos., Vertical - 1no.,
Control cables & Power cables form control room panel to the three
winch houses : coiling, bundling & storing at designated place
lump
sum
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
4 Supply/Installation/Integration & commissioning of PLC & SCADA
System:
Programmable Logic Controller – PLC of Mitsubishi /ABB make with
160 Remote IO Digital Out-puts/16 number Remote IO Digital inputs
/56 Rack mounted Ethernet Interface CC link centralized PC and shall
meet the functionality of the job without any shortcomings and flash
EEPROM for backup and battery backup with sufficient counters, timers
etc., Any changes in the no. of I/Os required for satisfactory conduction
testing with 60 Pull-off-points (POP).
1 no
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
4.1 Touch Screen 22 Inch (one each for Vertical, Transverse &
Longitudinal directions and 1 Number Spare) with suitable
Central PLC/SCADA panel/s with centrally inter linked for
mutual operation, monitor & control and also to indicate false
alarm / overload indication, operation indication etc., The
system shall cater to above number of POP with sufficient
spares and provision for expansion to upto 60 points. However,
latest state of the art system can be selected /considered.
4 nos
0.00
GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
4.2 Display units 42 Inch (one each for Vertical, Transverse &
Longitudinal load display representing Loading Tree)
communicating with Central PC for displaying normal load &
peak load for mutual monitor and also to indicate overload /
load release indication etc.,
3 nos
0.00
GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
4.3 Suitable panel to mount PLC / Touch screens / PC etc., 1 no 0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
5 Software: Industrial grade PC & relevant software shall be of
licensed & latest version. Complete Integration of M/C & control
Software with Automation – Generation/Preparation of rigging
chart of suitable format, uploading of input /set points from
rigging chart/ electronic file, collection of o/p from strain
measurements, UTM, Electronic Theodolite (Total Station),
Environmental data, Trends of load application, load
application and to operate & control in Auto or Semi-Auto
Modes for different test conditions (closed loop system) as in
Flow Diagram (Enclosure -2)
1 no
0.00
GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
AUTO / SEMI-AUTO MODE OF OPERATION as explained below
for clear understanding.--
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
iii) The supplier has to develop the validated software ( rigging
program ) as per the CPRI testing station layout to work out the
corrected loads to be applied on the test tower in transverse,
longitudinal & vertical loads due to inclination of pulley
mounting points with respect to each test towers. The required
input /detail will be furnished by CPRI for developing the
rigging software
lump
sum
0.00
5(iii) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
6 Supply, Testing & commissioning of strain gauge type (tension
type) Load cells for outdoor use.
--
1) 50t Capacity -10 nos to suite supplied signal conditioner/s. 10 nos 0.00
6(1) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
2) 100t capacity- 1no. with Digital Indicator with 25mm Normal
& Peak LED Displays to read in kN/t selection (-1000.00 KN / -
100.000 t), provision to adjust Zero/Span.
1 no 0.00
6(2) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
7 Calibration of load cells.
The existing 600 kN capacity Universal Testing Machine having
Standard PC Control shall be integrated for verification of load
cells & and recording and report generation with customized
format. The report generation formants will be issued during
the commissioning stage.
The UTM is placed at a distance of 40m (approx) from the
control panel of control room.
lump
sum
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
8 i) Supply of Strain Measuring System:
Specification:
a) No of Channel: 30 (extendable to 50 channels) for strain,
strain gauge type transducer, DC volt, Temperature
measurements.
b) It shall be Stand Alone System having on board memory of 4
Gb which auto stores data in.csv format which can easily read in
excel file (.xls).
c) System having strain resolution of 1 micro strain, built in
Display & Thermal printer.
d) Bridge Configuration: Full bridge, Half bridge, Quarter bridge
e) Strain Gauge resistance: 120/350 Ohm with 3 lead /4 lead
wire.
f) Accuracy: +/- 0.05% of reading.
g) Temperature Self compensation: Required (outdoor/ indoor
strain measurement).
h) Scanning speed: 0.08s/channel or better
i) Data transfer through: USB & RS-232C/LAN
j) Max. operating temp.: 50 deg.C
k) Power supply: 230V+/-10V, AC, 50Hz
l) Mandatory features self-calibration, data entry, start, print
function, saving with time intervals for recording etc
m) Mandatory spares & accessories if any for function of data
acquisition, transfer, record & reporting.
n) Operation manual /guide in both soft & hard copy.
1 no
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
ii) The Strain measurement shall be integrated to central PC for
measuring and recording the Strain measurement on selected
members of test tower and compared to the capacity of member
and shall provide the warning signal to proceed with the testing
or otherwise to stop the testing, customized report generation
with necessary hardware, communication cables etc.,
Lump
sum
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
9 Deflection Measurement:
The existing system is of Model RT 325 NX ( PANTAX make) to
be integrated to central PC for on line recording/ viewing of
results and customized report generation, along with requisite
hardware, communication cables & its laying etc.,
1 no
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
10 Customized Report Generation (containing the details as in sl
no .7 of Enclsoure -1. The report generation formants will be
issued during the commissioning stage.
lump
sum
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
11 Design, supply & commissioning of video monitoring &
recording facility of test tower.
The scope of supply includes, supply, installation, integration of
video monitoring system of with of high speed PTZ cameras
with suitable controller, digital video/ Audio recorder of high
quality real time recording up to 400fps / Fast store monitoring
/ playback / freeze / zoom, color monitor & hooking to Existing
Display of 50 inch and commissioning with all the accessories
for tower testing including supply of mandatory spares.
--
11.1 High Speed PTZ cameras :
The day/night CCD colour cameras with high resolution,
Pan/Tilt/Swivel/Zoom facility shall be mounted outdoor &
indoor having the continuous scanning with zooming facility for
viewing complete tower under test in one picture. The housing
shall be suitable for all weather conditions.
Interline – transfer CCD colour camera with high resolution
min.450000 pixels to max.600000 pixels and above.
Resolution : Min.650 to max. 800 TV lines (Horizontal)
or better
Focal Length : f/ 4.3 to 150mm
Zoom : Total 220X to 300X (Auto/manual control)
Temperature/ operation: 5 Deg C to 50 Deg C
2 nos
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
11.2 Controller :
The main features of the controller should have facility to show
the images from various connected cameras as specified above.
(at least 4) by switching between 2 monitors. This should have
Auto Sequential Surveillance at preset Intervals. This should
have additional feature of control of Group sequence, Tour
sequence, freeze function, PTZ Trace function, spiral function,
Zoom IN/Zoom OUT and camera speed selection.
1 no
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
11.3 Digital Video/ Audio recorder:
The digital video and audio recorder should be compatible to
supplied cameras & able to record from minimum of 4 cameras
and micro phone for test sequence
announcing/narration/music etc. This should be able to
provide high quality real time recording / Fast store monitoring
/ playback / freeze / zoom / mixing (between different
cameras) features with network viewer and capacity to
record/store minimum of 100 hours. And should have facility to
write to CDs and other features as given below.
Speed :up to 400fps (live display) & 200 fps
(recording)
Display Resolution : 720 X 480 720 X 576
Multi-Screen : 1 / 4
Recording Resolution: : 720x480, 360x240, 720x576, 360x288
Mode : Normal, Schedule, Event
Backup / Copy : USB Memory stick
Network Protocol : TCP/IP, DHCP
Software : Suitable software
Remote control : Shall be provided
OSD : Stylish ICON
Storage : CD- R/RW
Hardware if any : As per requirement for satisfactory
operation / commissioning.
Temperature operation : 5 Deg C to 50 Deg C
Power Source : 230V, 50Hz
1 no
0.00
GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
11.4 Color CC TV Monitor: 21 inch (PAL type) Resolution: 450 to
700 TV lines 1 no
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
12 The junction boxes Quantity : 4 nos. (one each at Transverse
winch house & Longitudinal winch house with 20 nos. & 24 nos
of connectors/load cell cables respectively, one number at test
bed with 60nos of connectors & one number in control room to
receive signal cables/connectors of 104 nos (20+24+60) from
the field to signal conditioners. Connectors shall be of
Amphenol/Allied make (Female connectors shall be fixed to
board appropriately. & Requisite Male/Female parts shall be
supplied for communication cable at load cell end and junction
box/Panel ends).
4 nos
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
13 The requisite Copper power cable of (armoured) reputed make
shall be supplied for VFD to winches with laying & termination.
The rating of winches shall be as mentioned in Sl no 1 of
Enclosure -1 of specification Due to changing of winches to VFD
control, if there is change in rating, it may be considered
accordingly. However, possibility of using existing cables
(copper cable of 12/14 core of 1.5sq.mm each core of multi
strand) may also be explored considering the laying &
termination part of work by the supplier. The total length of
cable from VFD panels to winches may be about 1800m
approximately considering requirement at all the 3 winch
houses. The cable from winch to pendent switch of each winch
may also be considered appropriately by the supplier.
The mains power cable from control room to winch houses will
be the scope of CPRI, however, termination of cable to panels at
winch houses to be made by the supplier
1800 m
0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
14 The Communication cable from control room to winch
houses/VFDs shall be laid with metallic pipe through the
existing cable trenches. Length : 1000 meters
1000 m0.00
GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
14.1 Load Cell Cable: Six core (14 x 0.2mm), copper screen cable for
load cells
21000
m0.00
GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
15 The electrical panels supplied for winch houses to receive VFD
drives / incoming main power supply through two cables each
at transverse & longitudinal side and one cable at vertical side
winch house and requisite capacity main switches shall have
individual power supply Control/MCB/MCCB/ELCB/Overload
relays/ Voltage & Ampere indicators/indicating lights/ push
buttons if any and other protective circuit & to be made rodent
free enclosure fabricated with metal sheet of appropriate
thickness & metallic painted.
--
i) Transverse side panel 1 no 0.00
15(i) GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
ii) Longidutinal side panel 1 no 0.00
15(ii) GST rate as applicable in percentage onlyCGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
iii) Vertical side panel 1 no 0.00
15(iii) GST rate as applicable in percentage only
CGST 0.00
IGST 0.00
SGST 0.00
UTGST 0.00
CESS if any 0.00
16 The Whole system of PLC/SCADA/VFDs/Video coverage shall be
designed and supplied with complete protection against
lightening/ radio/ electronic interference during the operation.--
17 Special Terms & Conditions: 17.1 The prospective bidders shall visit the site/TTS of CPRI Bangalore for
any clarification & understanding of scope of work before offering their
quote.
--
17.2 The bidders shall have experience on similar work & supplied
computer controlled transmission line tower test system at least for
two customers and shall submit satisfactory commissioning and
satisfactory post supply servicing certificate/s.
--
17.3 The proposed Method / Methodology of implementation of the
Automation with necessary circuit diagram, flow diagrams, screen
design, GA drawing BOM etc., shall be submitted along with their offer.
--
17.4 The complete integration of existing system of Tower Testing with the
offered Automation package shall be carried out as a turnkey job
considering all the necessary requirements like inter posing relays,
power supply, signal drivers, signal conditioners etc., and any such
requirements which have been may/may not brought out implicitly /
explicitly to meet our specification for satisfactory working of the test
system, without any extra cost implications to CPRI other than offer
made by the bidder.
--
17.5 All the panels & cabling shall have rodent resistant arrangement. The
cables, electrical items like contactors, ESCBs, MCBs shall be of standard
reputed make & shall be indicated in the offer and shall have
interchangeability with other std. makes. All cable
connections/terminations appropriately numbered & ferruled in
intra/inter panels. The circuit diagram/s shall be supplied.
--
17.6 Test Certificates for items like power cables, load cell cables, control
cables, Communication Cable’s etc., shall be furnished along with
supply.
--
17.7 Modification if any in the Logic or Methodology for satisfactory
operation of tower test system and Customized Report Generation
(containing the details as in sl no .7 of SECTION II(A) of specification) &
shall be provided at free of cost with in the warranty period.
--
17.8 Successful bidder shall obtain pre-fabrication approval for panel/s.
supply of two sets of User Guides for Technical Operation & Services
Manuals etc., in both hard & soft copy.
--
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
17.9 Hands on training on systems design, integration, Application
development/ customization, operation, Report generation (as given in
the specification) and in-depth training covering all the intricacies of
the system offered for a minimum of 5 test towers (irrespective of time
duration) along with preventive & breakdown maintenance of the
system hardware. Class room Training of CPRI personnel on PLC,
SCADA, Hardware, operation & video recording etc.,
--
17.1 Guarantee of the offered system for 2 Years from the date of
commissioning and also any modifications in PLC/Software/Logic
required warranted due to advancement in the technology or problem
faced/encountered during usage shall be modified/carried out free of
cost within the period of two years.
--
17.11 The supply part & the servicing part of scope of work shall be scheduled
according to progress of Civil work which is anticipated to be completed
in July/Aug’2018.
--
17.12 Validation of the system for whole process of tower testing shall be
provided.--
17.13 As the above points are General Points of scope of supply, the specified
make and exact configuration of the system shall be offered mentioning
clearly the merit of inclusion / exclusion in supply or works.
--
17.14 FLOW CHART OF TOWER TESTING as per Enclosure -2 --
17.15 TYPICAL DIMENSIONS OF LOAD CELLS as per Enclosure - 3 --
18 OTHER MANDATORY REQUIREMENTS
18.1 The scheduled work is for SUPPLY, INSTALLATION &
COMMISSIONING--
18.2 Inspection of goods on receipt at CPRI, TTS, Bengaluru --
18.3 Inspection on Installation & Commissioning --
18.4 Manufacturer's / Factory Test Certificates for the equipmants
supplied --
18.5 Calibration / Verification Report for the Load Cells from an
NABL Accredited laboratory shall be supplied --
18.6 Software validation for supplied softwares shall be provided.
18.7 Installation of brakes for winches & VFD drives installation
works shall go in parallel--
18.8 Warranty Certificate for at least 2 Year from the date of
commissioning--
19 Transportation Charges (To be Quoted in Lumpsum ,if
applicable)
0.00
GST rate as applicable in percentage onlyCGST 0.00IGST 0.00SGST 0.00UTGST 0.00CESS if any 0.00
20 Installation and Commissioning Charges (To be Quoted in
Lumpsum ,if applicable)
0.00
GST rate as applicable in percentage onlyCGST 0.00IGST 0.00SGST 0.00UTGST 0.00CESS if any 0.00
TOTAL LANDED COST 0.00
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Revision No. Issue No. : 02Dt of Revision Issue Dt. : 30.06.2003Page No. Issued by : P ASection Document : PPMTopic
21
OPTION-1 : ( This cost is optional hence will not to be considered for cost
comparission evaluations.)
Post warrenty comprehensive AMC including,
Labour, Travel, Spare Parts etc. to be quoted in lumpsum in
INR only. For two years.
2 0.00
GST as applicable 0.00
22
OPTION-2 : ( This cost is optional hence will not to be considered for
cost comparission evaluations.)
Mandatory Spares- Detailed list of items to be furnished
in technical bid. (If any in INR)
0.00
GST as applicable 0.00
Sl.No Terms and conditions of the Bidder for the below
1 Guarantee/Warrantee period
2 After sales and services facility
3 Delivery period
4 Validity of the quotation
5 Payment terms
6 Income Tax permanent account number(PAN)
7 Details of enlistment if any under Department of
expenditutre , Minsitry Of Finance , GOI.
8 Name and address of the customer,if any to whom a
similar equipment/items/Service has been supplied with
their purchase order number and date.
9 Whether a similar equipment could be demonstrated to
our representative in case required.
10 Details of EMD submitted
11 Acceptance for submission of security deposit in the event
of placement of order.
: e-Tender Price Bid Document for Indigenous offer FORMAT NO.:CPRI/PUR/℮PBID/IND: Formats
CENTRAL POWER RESEARCH INSTITUTE, BENGALURU Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2207 2010
: 2 of 2
: 04
Remarks
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section I(A)-Price Bid for Indigenous offer
: 25.07.2017
UNDER TAKING: THE OFFER MADE IS IN STRICT COMPLAINCE WITH THE QUALITY AND OTHER TECHNICAL REQUIREMENT
MENTIONED IN SECTION-II.
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU,
KARNATAKA. INDIA, PH: +91 82778 92292, TELE FAX : 080 2207 2010, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Recommended