View
243
Download
8
Category
Preview:
Citation preview
IBarn Door Hardware
Door Track Sliding Door FittingsDust Seal / Weatherseal
304 Grade Stainless Steel..... 22-25Flat Rail..... 30Powder Coated Iron..... 26-30Round Rail..... 26-29
Aluminum..... 13Anti-Rattle Feather Track..... 12Miracle Track I & II..... 12Plastic..... 11-12
Aluminum Systems..... 13Floor Sliding System..... 4Hardware..... 10Plastic Systems..... 11-12Sliding System For Furniture..... 2-3Top Sliding System..... 5-9
13
Sliding DoorHardware Systems I-1~30
InvisiDoor™
14-15
I-1Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
AL1535 GLASS & WOODIdeal for bypass / inlay glass or wood doors in furniture applications
SLIDING DOOR SYSTEM FOR FURNITURE
Glass Door Carrier Kit For 2 Doors
• Maximum Door Weight: 33 lbs.• Ball bearing premium high quality rollers for a silent & smooth glide• Stoppers are installed inside the track• One track works with both glass & wood carrier kits• Aluminum track available in two lengths• Works as both upper & lower track
Each Kit Includes: 4 carriers, 4 top guides w/clip device, 8 finishing caps,4 stoppers w/retention device & screws.
For Doors 5/32” - 1/4” Thick
CARRIERINSTALLATION
GUIDEINSTALLATION
Wood Door Carrier Kit For 2 Doors
Carrier works with 5/32-1/4” thick doors up to 33 lbs.Note: Must bore holes in glass for installation before tempering
For Glass
Each Kit Includes: 4 carriers, 4 top guides w/clip device, 4 stoppers w/retention device & screws.
For Doors 5/8” Thick
Carrier works with 5/8” thick doors up to 33 lbs.
CARRIERINSTALLATION
GUIDEINSTALLATION
For WoodAluminum Track(Clear Anodized Finish)
Carrier
Top Guide
Kit Includes
Sliding Door Track For Furniture, Sliding Door Fittings, Sliding Door Hardware, Hanging Door Hardware, Glass Door Carrier, Wood Door Carrier, Glass Door Track, Bypass Glass Door Track, Inlay Glass Door Track, Furniture Glass Track
I-2 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
AL1535-TRK66.5 Ft. Lengths
$6.50 ea.10+ pcs... $5.40 ea.
AL1535-TRK10
10 Ft. Nominal Lengths$9.60 ea.
10+ pcs... $8.00 ea.
AL1535-GKIT$25.00 set
5+... $20.85 set
AL1535-WKIT$20.40 set
5+ ... $17.00 set
3/16”
1/8”
15/64”
9/16”9/32”
Sliding Door Fittings
D25Ideal for bypass / inlay wood doors in furniture applications
SLIDING DOOR SYSTEM FOR FURNITURE
• Maximum Door Weight: 33 lbs.• Standard ball bearings• Easy to install & regulate• Works as both upper & lower track
Wood Kit For 2 Doors
Each Kit Includes: 4 carriers,4 stoppers, 4 upper guides & screws
For Doors 5/8” Thick
A
Kit Includes
CARRIERINSTALLATION
GUIDEINSTALLATION
TRACKINSTALLATION
For Wood
Carrier & Stopper Upper Guide
PVC Track(Finishes Below)
Choice of Matching Colors:
Silver*(SL)
Brown *(BR)
Caramel *(CA)
Beige *(BE)
White *(WH)
Black *(BK)
5/16”
9/16”3/32”
1/32”
13/64”
Sliding Door Track For Furniture, Sliding Door Fittings, Sliding Door Hardware, Hanging Door Hardware, Glass Door Carrier, Wood Door Carrier, Glass Door Track, Bypass Glass Door Track, Inlay Glass Door Track, Furniture Glass Track
I-3Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
D25-KIT$8.70 set
5+... $7.25 set
D25-TRK10*9.85 Ft. Lengths
$8.28 ea.10+ pcs... $6.90 ea.
Sliding Door Fittings
Carrier KitFor 2 Doors
For Doors Up To 5/8” Thick
D52Ideal for bypass / inlay closet applications where a top sliding solution is challenging
FLOOR SLIDING SYSTEM FOR WOOD OR ALUMINUM DOORS
• Maximum Door Weight: 110 lbs.• Premium ball bearing high quality rollers for a silent
and smooth glide• Multiple doors can be installed side by side for longer openings• Carrier plate can be mounted overlay for fast and easy installation
or inset for minimum gap between doors• Plastic safety clips prevent door from jumping the track• Can be mounted to wood, particle, MDF, plywood, aluminum, etc.
Kit Includes
Each Kit Includes: 4 carriers, 4 top guides, 1 bumper & screws
MAX DOORWEIGHT
110 LBS
DOORTHICKNESS
> 5/8”
E
INLAY SYSTEM BYPASS /
PER KIT2 DOOR
1
MAX DOORHEIGHT
NONENONE
MAX DOORWIDTH
DOOR / TRACKGAP
>
>
≥ 2-3/16”
MIN DOORFRAME HEIGHT
WOOD ORALUMINUM
DOOR FRAMEMATERIAL
ANSI-BHMA *
GRADE 1
SALINITYTEST
ROLLER
BEARINGPREMIUM
BALL
13/64”
13/64”
1 2
Aluminum Carrier Track(Clear Anodized Finish)
Aluminum Guide Track(Clear Anodized Finish) Carrier Top Guide Bumper
1 set completes 2 doorsD52-WKIT
4 Carriers
4 Top guides
1 Bumper
Screws
A
B
C
D
.73”
.59”
.73”
.433”
Floor Sliding Door Track For Wood Doors, Floor Sliding Door Track For Aluminum Doors, Sliding Door Fittings, Sliding Door Hardware, Bypass Closet Doors, Inlay Closet Doors, Aluminum Carrier Track, Aluminum Guide Track, D52
I-4 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
D52-TRK66.5 Ft. Lengths
$9.20 ea.10+ pcs... $7.67 ea.
D52-TRK10
9.85 Ft. Nominal Lengths$14.00 ea.
10+ pcs... $11.67 ea.
D52-GD-TRK66.5 Ft. Lengths
$9.20 ea.10+ pcs... $7.67 ea.
D52-GD-TRK10
9.85 Ft. Nominal Lengths$14.00 ea.
10+ pcs... $11.67 ea.
D52-KIT$26.70 set
5+... $22.25 set
Sliding Door Fittings
CA-4585Ideal for closet bypass / inlay applications or entertainment centers
• Maximum Door Weight: 66 lbs.• Premium ball bearing high quality rollers for a silent
and smooth glide• Carrier plate mounts directly to door• Plastic safety clips mount on the carrier plate and
assure the door will not jump from the track• Stoppers with retention device are concealed in the track
giving a clean look
Carrier Stopper Plastic Guide
Aluminum Track(Clear Anodized Finish)
Each Kit Includes: 4 carriers,2 right stoppers, 2 left stoppers,3 plastic guides, 8 safety clips,1 allen key & screws
MAX DOORWEIGHT
66 LBS
DOORTHICKNESS
3/4” - 1-1/4”
E
INLAY SYSTEM BYPASS IN LINE/
PER KIT2 DOOR
1
MAX DOORHEIGHT
NONENONE
MAX DOORWIDTH
DOOR / TRACKGAP
13/64”
5/16”
≥1-3/8”
MIN DOORFRAME HEIGHT
WOOD ORALUMINUM
DOOR FRAMEMATERIAL
ANSI-BHMA *
GRADE 1
SYSTEM 32
NO
ROLLER
BEARINGPREMIUM
BALL
1 2
INLAY GUIDE INSTALLATION
OVERLAY GUIDE INSTALLATION
CARRIER INSTALLATION
5/16”5/16”
SAFETY CLIPSKeep door on track
2”
Kit Includes
carrier set for 2 doorsCA-4585-KIT
4 Carriers
2 Right stoppers 2 Left stoppers
3 Plastic Guides
8 Safety clips
Screws
A
B
C
D
F
1 Allen keyE
TOP SLIDING SYSTEM FOR WOOD OR ALUMINUM DOORS
Carrier KitFor 2 DoorsFor Doors 3/4” - 1-3/8” Thick
1-31/32”
1-3/8”
Top Sliding Door Track For Wood Doors, Top Sliding Door Track For Aluminum Doors, Sliding Door Fittings, Sliding Door Hardware, Bypass Closet Doors, Inlay Closet Doors, Aluminum Carrier Track, Aluminum Guide Track, Ca-4585I-5Phone:1-800-835-4400 • Fax:1-800-835-4403
Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CA-4585-TRK66.5 Ft. Lengths
$33.40 ea.10+ pcs... $27.83 ea.
CA-4585-TRK10
9.85 Ft. Nominal Lengths$49.70 ea.
10+ pcs... $41.42 ea.
CA-4585-KIT$24.60 set
5+... $20.50 set
Sliding Door Fittings
> 2-1/2”
1-23/32”
1/2"
3/4"
3/16"
5/8"
3/8"
TRACK INSTALLATION
GUIDE INSTALLATION
CARRIER INSTALLATION
D & E
1 set required per doorDN50-WKIT
2 Rollers
2 Stoppers with retention device
1 Floor guide GP-12
2 Mounting plates
Screws
A
B
C
D
E
MAX DOORWEIGHT
1 DOORPER KIT
110 LBS
DOORTHICKNESS
> 3/4”
E
INLAY SYSTEM BYPASS IN LINE/
1
MAX DOORHEIGHT
NONENONE
MAX DOORWIDTH
DOOR / TRACKGAP
> 1/2”
>1/8”
N.A.
MIN DOORFRAME HEIGHT
WOOD
DOOR FRAMEMATERIAL
ANSI-BHMA *
GRADE 1
SYSTEM 32
NO
ROLLER
BEARINGPREMIUM
BALL
DN50Ideal for bypass in line / inlay wood doors, when two runs of track are used
TOP SLIDING DOOR TRACK FOR WOOD DOORS
• Maximum Door Weight: 110 lbs.• New central drive technology encapsulates the premium
ball bearing in the body of the carrier• Provides protection from dust, dirt and atmospheric
agents deteriorating the bearing life• Improved wheel adjustment providing greater carrier
stability and versatility• Extremely silent movement• Stoppers with retention device installed inside the track
will stop and retain the door in position
Aluminum Track(Clear Anodized Finish)
Kit Includes
Roller Stopper Floor Guide
Each Kit Includes: 2 rollers,2 stoppers with retention device,1 floor guide, 2 mounting plates & screws
Wood KitFor 1 Door
For Doors Up To 3/4” Thick
1-1/4”
1-5/16”
1-3/32”
Top Sliding Door Track For Wood Doors, Sliding Door Fittings For Wood Doors, Sliding Door Hardware, Bypass Wood Door Track, Inline Wood Door Track, Wood Door Carrier, Aluminum Carrier Track, Aluminum Guide Track, Dn50
I-6 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
DN50-TRK66.5 Ft. Lengths
$29.40 ea.10+ pcs... $24.50 ea.
DN50-TRK10
9.85 Ft. Nominal Lengths$43.60 ea.
10+ pcs... $36.33 ea.
DN50-WKIT$26.70 set
5+... $22.25 set
Sliding Door Fittings
Wood KitFor 1 Door
For Doors Up To 13/16” Thick
TRACK INSTALLATION
GUIDE INSTALLATION
CARRIER INSTALLATION
> 3-3/16”
1-3/8”
1-9/16”
3/8”
5/8”
D & E
1 set required per doorDN80-WKIT
2 Rollers
2 Stoppers with retention device
1 Floor guide GP-12
2 Mounting plates
Screws
A
B
C
D
E
MAX DOORWEIGHT
176 LBS
DOORTHICKNESS
> 13/16”
E
INLAY SYSTEM BYPASS IN LINE/
PER KIT1 DOOR
1
MAX DOORHEIGHT
NONENONE
MAX DOORWIDTH
DOOR / TRACKGAP
> 21/32”
>13/64”
N.A.
MIN DOORFRAME HEIGHT
WOOD
DOOR FRAMEMATERIAL
ANSI-BHMA *
GRADE 1
SYSTEM 32
NO
ROLLER
BEARINGPREMIUM
BALL
DN80Ideal for bypass in line / inlay wood doors, when two runs of track are used
TOP SLIDING DOOR TRACK FOR WOOD DOORS
• Maximum Door Weight: 176 lbs.• Premium Ball bearing high quality rollers for a silent
and smooth glide• Stoppers with retention device installed inside the track
will stop and retain the door in position
Roller Stopper Floor Guide
Kit Includes
Aluminum Track(Clear Anodized Finish)
Each Kit Includes: 2 rollers,2 stoppers with retention device,1 floor guide, 2 mounting plates & screws
1-11/32”
1-21/64”
1-15/64”
1-17/32”
Top Sliding Door Track For Wood Doors, Sliding Door Fittings For Wood Doors, Sliding Door Hardware, Bypass Wood Door Track, Inline Wood Door Track, Wood Door Carrier, Aluminum Carrier Track, Aluminum Guide Track, Dn80I-7Phone:1-800-835-4400 • Fax:1-800-835-4403
Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
DN80-TRK66.5 Ft. Lengths
$37.90 ea.10+ pcs... $31.58 ea.
DN80-TRK10
9.85 Ft. Nominal Lengths$56.00 ea.
10+ pcs... $46.67 ea.
DN80-WKIT$37.00 set
5+... $30.83 set
Sliding Door Fittings
DN80-PL2Ideal for folding / inlay partitions or big closet applications
• Maximum Door Weight: 88 lbs.• Premium Ball bearing high quality rollers and aluminum
track allows for silent and smooth glide• Can be installed left or right• 2 sets DN80-PL2 installed in opposite directions can
close a 10 ft. opening
Aluminum Track(Clear Anodized Finish)
Each Kit Includes: 1 carrier,1 upper fixed base/pivot, 1 lower fixed base/pivot, 3 central hinges, regulation key, 1 aligner,1 mounting plate & screws
TOP SLIDING FOLDING DOOR SYSTEM FOR WOOD DOORS
MAX DOORWEIGHT
88 LBS
DOORTHICKNESS
> 13/16”
E
INLAY SYSTEMFOLDING /
PER KIT2 DOOR
1
MAX DOORHEIGHT
NONE< 29-1/2”
MAX DOORWIDTH
DOOR / TRACKGAP
21/32”
5/8”
NONE
MIN DOORFRAME HEIGHT
WOOD
DOOR FRAMEMATERIAL
SALINITYTEST
ANSI-BHMA *
GRADE 1
ROLLER
BEARINGPREMIUM
BALL
1 2
LOWER PIVOT INSTALLATION
TRACK INSTALLATION
CARRIER INSTALLATION
≥1-9/16”
1-9/16”
1”
1-3/8”
CarrierUpper
Fixed BaseLower
Fixed Base Central Hinge
set for 2 doorsDN80-PL2-WKIT
1 Carrier
1 Upper fixedbase / pivot
1 Lower fixedbase / pivot
3 Central hinges
Screws
A
B
C
D
F
Regulation keyE
1 Mounting platesG
1 AlignerF
Kit Includes
Carrier KitFor 2 DoorsFor Doors Up To 13/16” Thick
1-11/32”
1-21/64”
1-15/64”
1-17/32”
Top Sliding Folding Door Track For Wood Doors, Sliding Door Fittings, Sliding Door Hardware, Folding Partitions, Inlay Partitions, Closet Doors, Aluminum Carrier Track, Aluminum Guide Track, Dn80-Pl2
I-8 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
DN80-TRK66.5 Ft. Lengths
$37.90 ea.10+ pcs... $31.58 ea.
DN80-TRK10
9.85 Ft. Nominal Lengths$56.00 ea.
10+ pcs... $46.67 ea.
DN80-PL2-WKIT$26.70 set
5+... $22.25 set
Sliding Door Fittings
Aluminum Carrier Track(Clear Anodized Finish)
Aluminum Guide Track(Clear Anodized Finish)
DN80-PL4Ideal for folding / inlay partitions or big closet applications
TOP SLIDING FOLDING DOOR SYSTEM FOR WOOD DOORS
• Maximum Door Weight: 88 lbs.• Premium Ball bearing high quality rollers and aluminum
track allows for silent and smooth glide• Can be installed left or right• 2 sets DN80-PL4 installed in opposite directions can
close a 20 ft. opening
Each Kit Includes: 2 carriers,1 upper fixed base/pivot, 1 lower fixed base/pivot, 9 central hinges, 2 guides, regulation key, 1 aligner,2 mounting plate & screws
BOTTOM GUIDE TRACK INSTALLATION
TRACK INSTALLATION
CARRIER INSTALLATION
20mm3/4"
1-9/16” 1-9/16”
1-3/8”
1-9/16”
D
Kit Includes
set for 4 doorsDN80-PL4-WKIT
2 Carriers
1 Upper fixedbase / pivot
1 Lower fixedbase / pivot
9 Central hinges
Screws
A
B
C
D
I
Regulation keyF
2 GuidesE
2 Mounting platesH
1 AlignerG
CarrierUpper
Fixed BaseLower
Fixed BaseCentralHinge
PlasticGuide
MAX DOORWEIGHT
4 DOORPER KIT
88 LBS
DOORTHICKNESS
> 13/16”
E
INLAY SYSTEMFOLDIND /
MAX DOORHEIGHT
NONE< 29-1/2”
MAX DOORWIDTH
DOOR / TRACKGAP
5/8”
21/32”N.A.
MIN DOORFRAME HEIGHT
WOOD
DOOR FRAMEMATERIAL
SALINITYTEST
ANSI-BHMA *
GRADE 1
ROLLER
BEARINGPREMIUM
BALL
Carrier KitFor 4 DoorsFor Doors Up To 13/16” Thick
1-11/32”
1-21/64”
1-15/64”
1-17/32”
1”
19/32”45/64”
27/32”
Top Sliding Folding Door Track For Wood Doors, Sliding Door Fittings, Sliding Door Hardware, Folding Partitions, Inlay Partitions, Closet Doors, Aluminum Carrier Track, Aluminum Guide Track, Dn80-Pl4I-9Phone:1-800-835-4400 • Fax:1-800-835-4403
Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
DN80-TRK66.5 Ft. Lengths
$37.90 ea.10+ pcs... $31.58 ea.
DN80-TRK10
9.85 Ft. Nominal Lengths$56.00 ea.
10+ pcs... $46.67 ea.
DN80-GDPL4-TRK66.5 Ft. Lengths
$13.50 ea.10+ pcs... $11.25 ea.
DN80-GDPL4-TRK10
9.85 Ft. Nominal Lengths$20.20 ea.
10+ pcs... $16.83 ea.
DN80-PL4-WKIT$52.40 set
5+... $43.67 set
Sliding Door Fittings
TOP MOUNT MEDIUM DUTY 3/4” THICK SINGLE DOOR SETS (100-150 LBS.)
TOP MOUNT HEAVY DUTY 1” THICK SINGLE DOOR SETS (225-325 LBS.)
Track
Track
HOLES SPACED EVERY 6” STAGGERED
6”
HOLES SPACED EVERY 6” STAGGERED
6”
• Material: Aluminum Track Metal Rollers with Nylon Bearings• Nylon wheel carrier for 100 lb. doors and precision ball bearing rollers for 150 lb. doors• Jump proof aluminum track design• 3/4” vertical adjustment• Lock nut guarantees permanent positioning
• Material: Aluminum Track Metal Rollers with Nylon Bearings• 2 wheel precision ball bearing rollers for 225 lb. doors and 4 wheel precision ball bearing rollers for 325 lb. doors• Jump proof aluminum design• 1/2” vertical adjustment
100 lb. / 150 lb. Roller3”
(76.2)
5” (127)
heightadjustment
3-9/16” (90.4)
screw#8 x 1-1/4”panhead
*
* Approximate Max. Clearance: 1.25” Min. Clearnace: .75”
4”(101.6)
4” - 6”(101.6 - 152.4)
heightadjustment
3-1/2” (88.9)
325 lb. Roller
Floor Guide
3/4”(19)
1-1/8”(28.6)
5/8”(15.9)
1-3/4”(44.4)
Floor Guide
7/16”(11.1)
3”(76.2) 3/4”
(19)
7/8”(22.2)
2”(50.8)
4” - 6”(101.6 - 152.4)
heightadjustment
3-1/2” (88.9)
** Approximate
Max. Clearance: 1.25” Min. Clearnace: 1.00”
225 lb. Roller
Grant Single Door Sets
Grant Single Door Hardware, Top Sliding Door Track, Sliding Door Fittings, Sliding Door Hardware, Rolling Door Fittings
I-10 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
PricePart # Per Ft. 120 Ft. 600 Ft.
ALU561-M $2.36’ $2.05’ $1.87’
PricePart # Per Ft. 120 Ft. 600 Ft.
ALU562-M $3.91’ $3.40’ 3.09’
PricePart # Description Each 25+ 50+
561-100R 100 lb. nylon roller $4.95 $4.45 ea. $4.30 ea.561-150R 150 lb. precision ball bearing roller $14.50 $13.20 ea. $12.30 ea.561-PLT Top plate with bolt $4.15 $3.75 ea. $3.50 ea.
561-FG White nylon floor guide pair:with screws (Not Pictured) $1.80 $1.65 ea. $1.50 ea.
PricePart # Description Each 25+ 50+
562-225R 225 lb. precision ball bearing roller $22.85 $20.75 ea. $19.40 ea.562-325R 325 lb. precision ball bearing roller $24.95 $22.70 ea. $21.80 ea.
562-FG 6’ long floor guide (Not Pictured) $18.85 $17.16 ea. $16.00 ea.
For any quantities less than 120 ft. add 15% to the 120 ft. price.
Sliding Door Hardware
Lengths: 12 Ft.Material: Polypropylene
No Glides or Wheels Needed
*WH - White *BK - Black*BR - Brown *AL - Almond
unless otherwise noted
Colors Available
Lengths: 12 Ft.Material: Styrene
*WH - White *BK - Black*BR - Brown *BE - Beige
Colors Available
1/4” x 1/4” x 1”
For use with:K101-606, K101-610, K101-601
Nylon Glides Are Recessed Into The DoorMounts onto 1/4” mortise
on the bottom of each door with a brad nail.
For use with: K101-606, K101-610, K101-601
For 5/8” Doors
Upper TrackK101-4079
Locking GlideR26-62
Lower TrackK101-606, 610
For 3/4” Doors
100 & 500 Ft. Coils
For 1/8” Doors* 5/32” gap
For 1/4” Doors* 5/16” gap
For 1/2” Doors* 9/16” gap
For 3/4” Doors* 13/16” gap
NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.
Styrene
Locking GlideR26-62
Plastic Sliding Door Track,
I-11Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Part # 120 Ft. 600 Ft. 1000 Ft.K101-4079-* $0.67’ $0.64’ $0.48’
Part # 120 Ft. 600 Ft. 1000 Ft.K101-606-* $0.64’ $0.61’ $0.47’
Part # 120 Ft. 600 Ft. 1000 Ft.K101-610-* $0.68’ $0.65’ $0.49’
Part # 100 Ft. 500 Ft. 1000 Ft.K101-601-* $0.35’ $0.33’ $0.28’
Part # 120 Ft. 600 Ft. 1000 Ft.180-* $0.60’ $0.57’ $0.47’
Part # 120 Ft. 600 Ft. 1000 Ft.140-* $0.78’ $0.74’ $0.67’
Part # 120 Ft. 600 Ft. 1000 Ft.120-* $1.19’ $1.13’ $1.04’
Part # 120 Ft. 600 Ft. 1000 Ft.340-* $1.51’ $1.43’ $1.28’
Part # 100 Pcs. 1000 Pcs.R26-62WH $0.09 ea. $0.059 ea.
Plastic Sliding Door Track
For Light Weight Doors
Natural Nylon White Locking Glides
Upper Track
Lower Double Flat Track
Lower Single Flat Track
With or Without Peel & Stick
AdhesiveComplete Set Consists Of:• 1 x 12 Ft. Length Upper Track• 1 x 12 Ft. Length Lower Track• 1 Wheel Per Running Ft.
- OUR MOST POPULAR ASSEMBLY-Complete Set Consists Of:
• 1 x 12 Ft. Length Upper Track• 1 x 12 Ft. Length Lower Track• 1 x 12 Ft. Length Shoe• 1 Wheel Per Running Ft.
High Quality Easy-Roll Metal Ball Bearings With Economy Of Plastic Track
• Lower track has sidewalls to prevent rollers from slipping off track• 1” (25.4mm) shoe allows superior gripping of glass or plywood doors• Deep upper track to allow extra clearance and easy installation• Zinc plated rollers with plastic wheel• Track & shoe material is rigid PVC
Lengths: 12 Ft. • Material: PVC • Silver Gray
For 1/4” Doors
Additional Wheels
For 1/4” Doors
NOTE: Rough Opening
Less 7/8” = Door Size
Material: Styrene • With or Without Adhesive
*BK - Black *SG - Silver GrayColors Available
Lengths: 12 Ft. Material: Polypropylene
Color: Brown
For 3/16”-1/4” Glass/Panel
NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.
Additional Wheels
SLIDING DOOR TRACK SYSTEM WITH WHEELS
SLIDING DOOR TRACK SYSTEM WITH WHEELS
Plastic Sliding Door Track, Plastic Miracle Door Track,
I-12 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Part # Price MTR $0.65 ea.
Part # Price MTR2 $0.42 ea.
Part # 120 Ft. 600 Ft. 1000 Ft.MT39-SG $2.00’ $1.89’ $1.73’
Without Adhesive - Available In 12 Ft. LengthsPart # 120 Ft. 600 Ft. 1000 Ft.
MT38-* $2.10’ $2.00’ $1.94’
With Adhesive - Available In 4 & 8 Ft. LengthsPart # Length 120 Ft. 600 Ft. 1000 Ft.
MT38-A4-* 4 ft. $2.47’ $2.38’ $2.28’MT38-A8-* 8 ft. $2.47’ $2.38’ $2.28’
For any quantities less than 120 ft. add 10% to the 120 ft. price.
Part # 120 Ft. 600 Ft. 1000 Ft.R101-603-BR $1.00’ $0.95’ $0.90’
Plastic Miracle Track
Plastic Miracle Track II
Anti-Rattle Feather Track
Finishes AvailableLengths: 12 Ft.
M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines
Lengths: 50 Ft. Coils • Color: Gray
For 1/8” Doors
For 1/4” Doors
For 1/2” Doors
For 3/4” Doors
For 3/4” Doors
Galvanized Steel
Galvanized Steel
Self supporting pile is always on center and has the integrity and consistency to ensure a tight seal.
MANYAPPLICATIONS:
WindowsDoors
Showcases
No Glides or Wheels Needed
For Up to 1/4”Doors
Wheels every 5-1/2”. Use 2/3 of the track with wheels.
Example: 6 ft. opening use 4 ft. of roller system.
Aluminum Sliding Door Track, Ultra Pile Dust Seal, Ultrapile Dust Seal, Ultra Pile Dustseal, Ultrapile Dustseal, Ultra Pile Weather Seal, Ultrapile Weather Seal, Ultra Pile Weatherseal, Ultrapile Weatherseal
I-13Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Part# Description 50 Ft. 100 Ft.DS-150-GY .270 W x .150 H $0.44' $0.35'DS-200-GY .270 W x .200 H $0.45' $0.36'
For any quantities less than 120 ft. add 15% to the 120 ft. price.
Part # Length Mill
ALU7474-M 120 Ft. $1.75’600 Ft. + $1.10’
Part # Length G. Steel
ALURC4-12 120 Ft. $2.60’600 Ft. + $1.89’
Part # Length G. Steel
ALUSH2-12 120 Ft. $1.55’600 Ft. + $1.17’
Part # Length Mill
ALUT18-M 120 Ft. $1.24’600 Ft. + $1.13’
Part # Length Mill
ALUT14-M 120 Ft. $1.55’600 Ft. + $1.41’
Part # Length Mill
ALUT12-M 120 Ft. $1.64’600 Ft. + $1.49’
Part # Length Mill
ALUT34-M 120 Ft. $1.90’600 Ft. + $1.73’
Part # Length Mill
ALUT134SP-M 120 Ft. $2.79’600 Ft. + $2.54’
Aluminum Sliding Door Track
Recommended for Glass or Wood Doors Recommended for Wood Doors
Ultra Pile Dust Seal / Weatherseal w/Adhesive
Don’t wait any longer to add a hidden bookcase door to your home. Our in stock and ready to ship kits come assembled and ready to install with our unique pivot hinge.
The hidden bookcase door can be hinged
to open in or our and swing left or right.
They are sized to fit standard 2’-8”
or 3’-0” W door openings.
Kits Include:1 - Book Shelf (assembled) w/One Fixed Shelf1 - Pivot Hinge Kit w/Fasteners3 - Adjustable Shelves12 - Shelf Supports1 - Support / StopInstructions
Seamlessly add a hidden bookcase to your home with this unfinished bookcase.
Optional Accessories:Cabinet DoorsJam / ThresholdTrim Moulding KitExtra Shelvessee next page
Build your own bookcase!
Hinge Kits - See pages H-48 & H49for our Pivot Hinge & Bi-Fold Hinge kits.
O.A.D. 35” W x 79” H x 8” D
O.A.D. 30-7/8” W x 79” H x 8” D
Unfinished Cherry Unfinished Maple Unfinished Red Oak
Turn a plain doorway into something unexpected & fun with the added function of creating a hidden space!Two standard sized bookcases with optional casings, doors, threshold & jambs create a finished look...a completely hidden look!
Completely Closed
Partially Opened
Completely Opened
Available in Unfinished Cherry, Maple & Red Oak
32”
36”
hidden bookcase door, invisi door, invisidoor, hidden door bookcase, bookcase hidden door, built in bookshelves, wall bookshelves, door bookshelves, book shelf, bookshelf, book shelves, secret bookcase door, bookcase secret door, secret door bookcase, hidden bookshelf door, hidden door bookshelf, bookshelf hidden door, bookshelf door, door bookshelf
I-14 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
HBC-3279-CH$1,249.00 kit
HBC-3279-MP$1,179.00 kit
HBC-3279-RO$1,129.00 kit
HBC-3679-CH$1,249.00 kit
HBC-3679-MP$1,179.00 kit
HBC-3679-RO$1,129.00 kit
Hidden Bookcase Door
New
32” or 36” Hidden Unfinished Bookcases
OPTIONAL ACCESSORIES for Hidden Bookcase
27-3/4” W x 6-3/4” H x 3/4” D
31-3/4” W x 6-3/4” H x 3/4” D
13-13/16” W x 28” H each 15-13/16” W x 28” H each
Create a Finished Look!
Side Jam (2) 3/4” Thick x 4-1/2” Deep x 81”HighUpper Jam (1) 3/4” Thick x 4-1/2” Deep x 36-1/2”HighThreshold (1) 3/4” Thick x 7” Deep x 36-1/2”High
Available in Unfinished Cherry, Maple & Red Oak
36” 32”
32”
36”
Doors are prepared for hinges. Hinges & fasteners included.
(2) 84” W x 3-1/2” H x 3/4” D (1) 48” W x 3-1/2” H x 3/4” D
Side Jam (2) 3/4” Thick x 4-1/2” Deep x 81”HighUpper Jam (1) 3/4” Thick x 4-1/2” Deep x 36-1/2”HighThreshold (1) 3/4” Thick x 4-1/2” Deep x 36-1/2”High
hidden bookcase door, invisi door, invisidoor, hidden door bookcase, bookcase hidden door bookshelves, book shelf, bookshelf, book shelves, bookcase secret door, secret door bookcase, bookshelf door, door bookshelf, unfinished flat panel doors for hidden bookcase door, unfinished shelf for hidden bookcase door, unfinished trim moulding kit for hidden bookcase door, unfinished inswing jam for hidden bookcase door, unfinished threshold kit for hidden bookcase door, unfinished outswing jam for hidden bookcase door
I-15Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Click Here
HBC-TRIM-CH
HBC-TRIM-MA
HBC-TRIM-RO
HBC-JMB36IN-CH
HBC-JMB36IN-MA
HBC-JMB36IN-RO
HBC-FPD32-CH$164.00 pair
HBC-FPD32-MP$149.00 pair
HBC-FPD32-RO$139.00 pair
HBC-FPD36-CH$164.00 pair
HBC-FPD36-MP$149.00 pair
HBC-FPD36-RO$139.00 pair
HBC-SHELF32-CH$20.00 each
HBC-SHELF32-MP$18.00 each
HBC-SHELF32-RO$18.00 each
HBC-SHELF36-CH$20.00 each
HBC-SHELF36-MP$18.00 each
HBC-SHELF36-RO$18.00 each
HBC-TRIM-CH$109.00 kit
HBC-TRIM-MP$100.00 kit
HBC-TRIM-RO$98.00 kit
HBC-JMB36IN-CH$213.00 kit
HBC-JMB36IN-MP$176.00 kit
HBC-JMB36IN-RO$155.00 kit
HBC-JMB36OUT-CH$207.00 kit
HBC-JMB36OUT-MP$170.00 kit
HBC-JMB36OUT-RO$148.00 kit
Hidden Bookcase Door
New
Unfinished Extra Shelf for 32” or 36” Bookcase
Unfinished Flat Panel Doors for 32” or 36” Bookcase
Unfinished Inswing Jam / Threshold Kit Unfinished Outswing Jam / Threshold Kit
3-1/2” Unfinished Trim Moulding Kit
Horseshoe
Classic Strap
Classic Strap II
• Complete single sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 1-3/4-in. thick doors up to 39-in. wide and 285 lbs.• Reinforced 1-1/2-in. x 3/16-in. solid steel rail will not bend or bow.• Heavy-duty steel door rollers provide smooth, whisper quiet operation.• Roller Size: 9-7/8” L x 6-1/4” W
• Complete single sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 1-3/4-in. thick doors up to 39-in. wide and 240 lbs.• Reinforced 1-1/2-in. x 3/16-in. solid steel rail will not bend or bow.• Heavy-duty steel door rollers provide smooth, whisper quiet operation.• Ideal for use with solid or hollow core interior doors.• Roller Size: 4-5/8” L x 5-1/3” W
• Complete single sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 1-3/4-in. thick doors up to 39-in. wide and 240 lbs.• Reinforced 1-1/2-in. x 3/16-in. solid steel rail will not bend or bow.• Heavy-duty steel door rollers provide smooth, whisper quiet operation.• Available In: Black & Espresso• Roller Size: 11-1/2” L x 1-9/16” W
• Complete double sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 1-3/4-in. thick doors up to 34-in. wide and 240 lbs. per door.• Reinforced 1-1/2-in. x 3/16-in. solid steel rail will not bend or bow.• Heavy-duty steel door rollers provide smooth, whisper quiet operation.• Roller Size: 11-1/2” L x 1-9/16” W
Classic Top MountOutwater’s new line of Barn Door Hardware fuses superior construction and exceptional
functionality with a refined aesthetic appeal that will elegantly blend into any traditional
or contemporary setting in which it is utilized.
Powder Coated Iron
Measurements Are ApproximateHardware Only, Doors Not Included
rolling barn door hardware kits, steel sliding hardware kits, steel sliding barn door hardware kits, classic top mount rolling barn door hardware, horseshoe mount rolling barn door hardware, horseshoe rolling barn door hardware, classic strap mounted rolling barn door hard-ware, classic strap rolling barn door hardware, classic strap II mounted rolling barn door hardware, classic strap II rolling barn door hardware, rolling barndoor hardware kits, quiet glide rolling barn door hardware, quiet glide barn door hardware, sliding door hardware, rolling door hardware kits, barn door sliders, rolling barn door hardware components, rolling barn door hardware accessories, sliding door rollers
I-16 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Only$98.00Ships UPS
Only$123.00
Ships UPS
Only$99.75Ships UPS
Only$191.50
Ships UPS
NewSteel Sliding Door Hardware Kits
The BrownstoneThe Townhouse
The Loft II
The Skyline IIThe Skyline
The DuplexThe Manhattan
• Complete single sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 2-1/8-in. thick doors up to 240 lbs.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, whisper quiet operation.• Ideal for use with solid or hollow core interior doors.• Roller Size: 4” L x 3-1/8” W
• Complete single sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 2-1/8-in. thick doors up to 240 lbs.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, whisper quiet operation.• Ideal for use with solid or hollow core interior doors.• Roller Size: 4-1/2” L x 2-7/8” W
• Complete double sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 2-1/8-in. thick doors up to 260 lbs. per door.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, whisper quiet operation.• Roller Size: 8-1/4” L x 1-3/16” W
• Complete single sliding wood door hardware kit with all fittings.• Works with 1-3/8-in. to 2-1/8-in. thick doors up to 260 lbs.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, whisper quiet operation.• Roller Size: 8-1/4” L x 1-3/16” W
• Complete double sliding glass door hardware kit with all fittings.• Works with 3/8-in. to 1/2-in. thick doors up to 195 lbs. per door.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, whisper quiet operation.• Roller Size: 8-1/4” L x 1-3/16” W
• Complete single sliding glass door hardware kit with all fittings.• Works with 3/8-in. to 1/2-in. thick doors up to 195 lbs.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, whisper quiet operation.• Roller Size: 8-1/4” L x 1-3/16” W
• Offered as a complete double sliding glass door hardware kit with all necessary fittings for only $428.00.• Works with 3/8-in. to 1/2-in. thick doors with a maximum weight of 195 lbs. per door.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, quiet operation.• Roller Size: 8-1/2” L x 1” W
• Complete single sliding glass door hardware kit with all fittings.• Works with 3/8-in. to 1/2-in. thick doors up to 240 lbs.• Reinforced 1-in. dia. x 1/16-in. 304 grade stainless steel rail will not bend or bow.• Heavy-duty 304 grade stainless steel door rollers provide smooth, whisper quiet operation.• Roller Size: 7-7/8” L x 1-3/16” W
The Loft
Heavy Duty 304 Grade Stainless Steel
stainless steel sliding door hardware kits, 304 grade stainless steel sliding door hardware kits, steel sliding door hardware kits, rolling barn door hardware, steel sliding barn door hardware, rolling door hardware barn door sliders, sliding door rollers, sliding door hardware components, sliding door hardware accessories, glass door kits, door roller, slidingdoor, barndoor, the townhouse, the brownstone, the loft, the loft II, the skyline, the sky line, the skyline II, the sky line II, the manhattan, the duplex
I-17Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Click Here
Only$158.50
Ships UPS
Only$227.50
Ships UPS
Only$216.00
Ships UPS
Only$406.25
Ships UPS
Only$198.75
Ships UPS
Only$250.50
Ships UPS
Only$369.00
Ships UPS
Only$428.00
Ships UPS
New Steel Sliding Door Hardware Kits
Sliding door hardware brings updated style & character to any space. Choose from the rustic, industrial look of iron or the clean, modern feel of stainless steel. Our selection of smooth rolling door straps will compliment any design style.
Classic Top Mount... (Single Wood Door Kits)Door Thickness: 1-3/8” to 1-3/4”Maximum Door Weight: 240 lbs.
Door Width: Less Than 39”
Kits Include:Door Roller
Door Stop 1-1/2” x 3/16” RailsDoor Roller
Routed Floor Guide(See Page I-24)
Anti-Jump Disk
Door Stop1-1/2” x 3/16” Rails Door Roller
Routed Floor Guide(See Page I-24)
Anti-Jump Disk
Wall Bracket
1-1/2” x 3/16” Rail
Door Stop Anti-Jump Disk
Horseshoe... (Single Wood Door Kits)Door Thickness: 1-3/8” to 1-3/4”Maximum Door Weight: 285 lbs.Door Width: Less Than 39”
Kits Include:Door Roller
Wall Bracket Floor Guide
Routed IntoBottom Of Door
1-1/2” x 3/16” Rail
Door Stop Anti-Jump Disk
Routed IntoBottom Of Door
Floor Guide
For Routing Information, See Page I-24. For Optional Handles & Adjustable Floor Guides, See Page I-25.
steel sliding door hardware kits, rolling barn door hardware, steel sliding barn door hardware, diy steel sliding door hardware, rolling door hardware kits, barn door sliders, sliding door rollers, sliding door rails, sliding door mounting brackets, sliding door brackets, sliding door rail brackets, sliding door stops, sliding door floor guide, sliding door hardware components, sliding door hardware accessories, sliding door rail with end caps, sliding door anti jump disk, sliding door anti-jump disk, sliding door wall bracket, steel sliding door single wood door kits, slidingdoor
I-18 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Part # Description Price
SDH-SW5-BLK(Black Finish)
1 Rail: 78” Long, 2 Door Rollers,2 Door Stops, 1 Floor Guide,
5 Wall Brackets, 2 Anti-Jump Disks& All Installation Hardware Included
$98.00 set
Part # Description Price
SDH-SW6-BLK(Black Finish)
1 Rail: 78” Long, 2 Door Rollers,2 Door Stops, 1 Floor Guide,
5 Wall Brackets, 2 Anti-Jump Disks& All Installation Hardware Included
$123.00 set
NewSteel Sliding Door Hardware Kits
Classic Strap... (Single Wood Door Kits)Door Thickness: 1-3/8” to 1-3/4”Maximum Door Weight: 240 lbs.
Door Width: Less Than 39”
Classic Strap II... (Double Wood Door Kits)Door Thickness: 1-3/8” to 1-3/4”Maximum Door Weight: 240 lbs. per doorDoor Width: Less Than 34”
Kits Include:
Kits Include:
Door Stop1-1/2” x 3/16” RailsDoor Roller
Routed Floor Guide(See Page I-24)
Anti-Jump Disk
Door Stop1-1/2” x 3/16” RailsDoor Roller Splicer &
Cover Plate
Routed Floor Guide(See Page I-24)
Anti-Jump Disk
Wall Bracket
Cover Plate
Door Roller1-1/2” x 3/16” Rail
1-1/2” x 3/16” Rail
Door Stop
Door Roller Door Stop
Anti-Jump Disk
Splicer
Wall BracketAnti-Jump Disk
Floor Guide
Routed IntoBottom Of Door
Floor Guide
Routed IntoBottom Of Door
For Splicer
BlackBlack Espresso
For Routing Information, See Page I-24. For Optional Handles & Adjustable Floor Guides, See Page I-25.
steel sliding door hardware kits, rolling barn door hardware, steel sliding barn door hardware, diy steel sliding door hardware, diy sliding doors, rolling door hardware kits, barn door sliders, sliding door rollers, sliding door rails, sliding door mounting brackets, sliding door brackets, sliding door rail brackets, sliding door stops, sliding door floor guide, sliding door hardware components, sliding door hardware accessories, sliding door rail with end caps, sliding door anti jump disk, sliding door anti-jump disk, sliding door wall bracket, steel sliding door single wood door kits, steel sliding door double wood door kits, slidingdoor
I-19Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Click Here
Part # Description PriceSDH-SW4-BLK
(Black Finish)1 Rail: 78” Long,
2 Door Rollers, 2 Door Stops1 Floor Guide, 5 Wall Brackets,
2 Anti-Jump Disks &All Installation Hardware Included
$99.75 setSDH-SW4-ESP(Espresso Finish)
Part # Description Price
SDH-DW4-BLK(Black Finish)
2 Rails: 68-7/8” Long, 4 Door Rollers,4 Door Stops, 2 Floor Guides,
9 Wall Brackets, 4 Anti-Jump Disks,1 Splicer, 1 Cover Plate &
All Installation Hardware Included
$191.50 set
New Steel Sliding Door Hardware Kits
The Townhouse... (Single Wood Door Kits)Door Thickness: 1-3/8” to 2-1/8”Maximum Door Weight: 240 lbs.
Door Width: Less Than 39”
Kits Include:
Door Stop1” Dia. x 1/16”
Rails with End CapsDoor Roller
Wall Bracket
Routed Floor Guide(See Page I-24)
Door Stop
Door Roller
The Brownstone... (Single Wood Door Kits)Door Thickness: 1-3/8” to 2-1/8”Maximum Door Weight: 240 lbs.Door Width: Less Than 39”
Kits Include:
Door Stop1” Dia. x 1/16”
Rails with End CapsDoor Roller
Wall Bracket
Routed Floor Guide(See Page I-24)
Wall BracketFloor Guide
Routed Into Bottom Of Door
Door Stop Wall BracketFloor Guide
Routed Into Bottom Of Door
Door Roller
1” Dia. x 1/16”Rail with End Caps
1” Dia. x 1/16”Rail with End Caps
For Routing Information, See Page I-24. For Optional Handles & Adjustable Floor Guides, See Page I-25.
stainless steel sliding door hardware kits, 304 grade stainless steel sliding door hardware kits, steel sliding door hardware kits, rolling barn door hardware, steel sliding barn door hardware, diy steel sliding door hardware, diy sliding doors, rolling door hardware kits, barn door sliders, sliding door rollers, sliding door rails, sliding door mounting brackets, sliding door brackets, sliding door rail brackets, sliding door stops, sliding door floor guide, sliding door hardware components, sliding door hardware accessories, sliding door rail with end caps, sliding door anti jump disk, sliding door anti-jump disk, sliding door wall bracket, steel sliding door single wood door kits, steel sliding door double wood door kits, door roller, steel sliding door door stop, sliding door wall bracket, slidingdoor
I-20 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Part # Description Price
SDH-SW03-SS(Satin Finish)
1 Rail: 78-3/4” Long with 2 End Caps,2 Door Rollers, 2 Door Stops,
1 Floor Guide, 4 Wall Brackets &All Installation Hardware Included
$158.50 set
Part # Description Price
SDH-SW04-SS(Satin Finish)
1 Rail: 78-3/4” Long with 2 End Caps,2 Door Rollers, 2 Door Stops,
1 Floor Guide, 4 Wall Brackets &All Installation Hardware Included
$227.50 set
NewStainless Steel (304 Grade)Sliding Door Hardware Kits
Kits Include:
Floor Guide
Routed Into Bottom Of Door
Kits Include:
The Loft II... (Double Wood Door Kits)Door Thickness: 1-3/8” to 2-1/8”Maximum Door Weight: 260 lbs. per doorDoor Width: Less Than 34”
The Loft... (Single Wood Door Kits)Door Thickness: 1-3/8” to 2-1/8”Maximum Door Weight: 260 lbs.
Door Width: Less Than 39”
Door Stop
Wall Bracket
Floor Guide
Routed Into Bottom Of Door
1” Dia. x 1/16”Rail with End Caps
Door Stop1” Dia. x 1/16”
Rails with End CapsDoor Roller
Wall Bracket
Routed Floor Guide(See Page I-24)
Door Roller
1-1/2” x 1/16”Rails with End Caps
Door RollerSplicer
Routed Floor Guide(See Page I-24)
Door Stop
WallBracket
Door Stop
Wall Bracket
Door Roller
Splicer
1” Dia. x 1/16”Rail with End Caps
For Routing Information, See Page I-24. For Optional Handles & Adjustable Floor Guides, See Page I-25.
stainless steel sliding door hardware kits, 304 grade stainless steel sliding door hardware kits, steel sliding door hardware kits, rolling barn door hardware, steel sliding barn door hardware, diy steel sliding door hardware, diy sliding doors, rolling door hardware kits, barn door sliders, sliding door rollers, sliding door rails, sliding door mounting brackets, sliding door brackets, sliding door rail brackets, sliding door stops, sliding door floor guide, sliding door hardware components, sliding door hardware accessories, sliding door rail with end caps, sliding door anti jump disk, sliding door anti-jump disk, sliding door wall bracket, steel sliding door single wood door kits, steel sliding door double wood door kits, door roller, steel sliding door door stop, steel sliding door wall bracket, sliding door splicer, slidingdoor
I-21Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Click Here
Part # Description Price
SDH-SW12-SS(Satin Finish)
1 Rail: 78-3/4” Long with 2 End Caps,2 Door Rollers, 2 Door Stops,
1 Floor Guide, 4 Wall Brackets &All Installation Hardware Included
$216.00 set
Part # Description Price
SDH-DW12-SS(Satin Finish)
2 Rails: 67-7/8” Long with 2 End Caps,4 Door Rollers, 4 Door Stops,
2 Floor Guides, 7 Wall Brackets, Splicer & All Installation Hardware Included
$406.25 set
New Stainless Steel (304 Grade)Sliding Door Hardware Kits
The Skyline... (Single Glass Door Kits)Door Thickness: 3/8” to 1/2”
Maximum Door Weight: 195 lbs.Door Width: Less Than 39”
Door Stop
1” Dia. x 1/16”Rails with End CapsDoor Roller
Wall Bracket
FloorGuide
1-1/2” x 1/16”Rails with End Caps
Door RollerSplicer
Floor Guide
Door Stop
WallBracket
The Skyline II... (Double Glass Door Kits)Door Thickness: 3/8” to 1/2”Maximum Door Weight: 195 lbs. per doorDoor Width: Less Than 34”
Kits Include:Door Stop
Wall Bracket
Floor Guide
Door Roller
Kits Include:
Floor Guide
Door Stop
Wall Bracket
Door Roller
Splicer
1” Dia. x 1/16”Rail with End Caps
1” Dia. x 1/16”Rail with End Caps
For Optional Handles, See Page I-25.
stainless steel sliding door hardware kits, 304 grade stainless steel sliding door hardware kits, steel sliding door hardware kits, rolling barn door hardware, steel sliding barn door hardware, diy steel sliding door hardware, diy sliding doors, rolling door hardware kits, barn door sliders, sliding door rollers, sliding door rails, sliding door mounting brackets, sliding door brackets, sliding door rail brackets, sliding door stops, sliding door floor guide, sliding door hardware components, sliding door hardware accessories, sliding door rail with end caps, sliding door anti jump disk, sliding door anti-jump disk, sliding door wall bracket, steel sliding door single wood door kits, steel sliding door double wood door kits, door roller, steel sliding door door stop, steel sliding door wall bracket, sliding door splicer, slidingdoor
I-22 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Part # Description Price
SDH-SG02-SS(Satin Finish)
1 Rail: 78-3/4” Long with 2 End Caps,2 Door Rollers, 2 Door Stops,
1 Floor Guide, 4 Wall Brackets &All Installation Hardware Included
$198.75 set
Part # Description Price
SDH-DG02-SS(Satin Finish)
2 Rails: 67-7/8” Long with 2 End Caps,4 Door Rollers, 4 Door Stops,
2 Floor Guides, 7 Wall Brackets, Splicer& All Installation Hardware Included
$369.00 set
NewStainless Steel (304 Grade)Sliding Door Hardware Kits
The Manhattan... (Single Glass Door Kits)Door Thickness: 3/8” to 1/2”
Maximum Door Weight: 240 lbs.Door Width: Less Than 39”
Door Stop
1” Dia. x 1/16”Rails with End CapsDoor Roller
Wall Bracket
FloorGuide
Kits Include:Door Stop
Wall Bracket
Floor Guide
Door Roller1” Dia. x 1/16”Rail with End Caps
Shown with custom handleSee our page I-25 for custom pulls
1” Dia. Railwith End Caps
Door StopWall BracketDoor RollerThe Duplex... (Double Glass Door Kits)
Door Thickness: 3/8” to 1/2”Maximum Door Weight: 195 lbs. per doorDoor Width: Less Than 34”
Kits Include:Door Stop1” Dia. x 1/16”
Rail with End CapsDoor Roller
Wall Bracket
Door HandleFloor Guide
For Optional Handles, See Page I-25.
stainless steel sliding door hardware kits, 304 grade stainless steel sliding door hardware kits, steel sliding door hardware kits, rolling barn door hardware, steel sliding barn door hardware, diy steel sliding door hardware, rolling door hardware kits, barn door sliders, sliding door rollers, sliding door rails, sliding door mounting brackets, sliding door brackets, sliding door rail brackets, sliding door stops, sliding door floor guide, sliding door hardware components, sliding door hardware accessories, sliding door rail with end caps, sliding door anti jump disk, sliding door anti-jump disk, sliding door wall bracket, steel sliding door single glass door kits, door roller, steel sliding door door stop, steel sliding door wall bracket, steel sliding door handles, adjustable floor guides for wood doors, wood door floor guides, slidingdoor
I-23Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Click Here
Part # Description Price
SDH-SG04-SS(Satin Finish)
1 Rail: 78-3/4” Long with 2 End Caps,2 Door Rollers, 2 Door Stops,
1 Floor Guide, 4 Wall Brackets &All Installation Hardware Included
$250.50 set
Part # Description Price
SDH-DG(Satin Finish)
1 Rail: 137-3/4” Long with 2 End Caps,4 Door Rollers, 4 Door Stops, 2 Floor Guides,
6 Wall Brackets, 2 Door Handles &All Installation Hardware Included
$428.00 set
New Stainless Steel (304 Grade)Sliding Door Hardware Kits
Routed Floor Guide Included In Steel Kits For Wood Doors
Routed Floor Guide Included In 304 Grade Stainless Steel Kits For Wood Doors
Adjustable Floor Guides For Wood Doors (Sold Separately: See Page I-25)
1/4”
3/4”
1/4”
3/4”
steel sliding door hardware kits, routed floor guide, steel kits for wood doors, adjustable floor guides for wood doors, sliding barn door hardware, sliding barndoor hardware
I-24 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Steel Sliding Door Hardware Kits New
Adjustable Floor Guides For Wood Doors
1-5/8”
2”Depth:1-3/8”
5-7/8” Pull 12” Pull
15-3/4” PullCustomize Your Pulls
8-1/8” Pull 8-15/16” Pull
Finish: Oil Rubbed BronzeOverall Length: 5-7/8”CC: 5”Width: 1/2”Projection: 1-9/64"Thickness: 9/32”
Finish: Oil Rubbed BronzeOverall Length: 8-15/16”CC: 8”Width: 1/2”Projection: 1-1/8”Thickness: 5/16”
Finish: Oil Rubbed BronzeOverall Length: 12”CC: 11.35”Width: 31/32”Projection: 1-3/4”Thickness: 3/8”
Finish: Stainless SteelOverall Length: 15-3/4”
CC: 300mmWidth: 1” Dia.
Projection: 2-3/4”Thickness: 1” Dia.
Finish: Flat BlackOverall Length: 8-1/8”CC: 5”Width: 7/16”Projection: 1”Thickness: 3/16”
Works WithWood Doors: 1-1/4” - 1-3/8”
Glass Doors: 3/8” - 1/2”
Works With Wood Doors Works With Wood DoorsWorks With Wood Doors Works With Wood Doors
2” Knob Genuine Italian Leather Pull
Overall Diameter: 2” Finish: Black, Espresso & Stainless Steel Finish: Black or Tan Pull With
Black or Brushed Nickel ButtonsOverall Length: 7.85” (200mm)Button Diameter: .79” (20.07mm)CC: 6.30” (160mm) Width: 1.60” (40mm)Projection: 1.50” (38mm)Thickness: .15” (3.90mm)
Works With Wood Doors: 1-1/4” - 1-3/8” & Glass Doors: 3/8” - 1/2”
Works With Wood Doors
Handles
2. INSERT feet at each end of cut tube
1. CUT tube to measured lengthFor More Information &
Pricing, See Page Q-8.
Our leather is an authentic leather product. Some variations in texture and color is normal and not a defect.
steel sliding door hardware kits, sliding door handles, sliding door knobs, sliding barn door handles, sliding barndoor handles, sliding barn door pulls, sliding barndoor pulls, adjustable floor guides for wood doors
I-25Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
SDH-DFG-SS$12.00 set
Finish: Stainless Steel
SDH-DFG-BLK$10.00 setFinish: Matte Black
84613Each: $9.90 25+: $8.88 ea.
84913Each: $24.9525+: $22.30 ea.
PULL-CON482-ORBEach: $30.9425+: $29.22 ea.
SDH-PULL-1-SSEach: $29.50
SDH-PULL-2-SSEach: $38.50
TK271BLKEach: $10.6225+: $9.91 ea.
SDH-KNOB-BLKEach: $16.00 125-236
Each: $40.4825+: $33.52 ea.
125-136Each: $40.48
25+: $33.52 ea.125-242
Each: $44.6625+: $36.98 ea.
125-142Each: $44.66
25+: $36.98 ea.SDH-KNOB-ESP
Each: $16.00
SDH-KNOB-SSEach: $19.00
New Steel Sliding Door Hardware Kits
Hardware Components OnlyThe doors of opportunity are rolling open
All Finishes Are Powder Coated
Matte Black (BK)
Rolling Doors give you that extra edge in home design. Choose from a variety ofdesign options that will enhance your home. Introduce a touch of rustic tone, select aclassic look, bring in medieval architecture, or give your home modern flair; whatever your decor, we have rolling door hardware to match. Whether your project is newconstruction or remodeling, a rolling door can be added easily, professionally and quickly.
Choose Your:Roller Strap & Finish
Rail Length(Rails should be at least 2X width of doors)
Rail Mounting Brackets for your correct door thickness (Every 16” Recommended)
Rail End Stops
Floor Guides & Stops
1
2
3
4
5
12 4
5
3
Rust (RST)
Oil Rubbed Bronze (ORB)
Satin Nickel (SN)
interior rolling barn door hardware, quiet glide barn door hardware, sliding barn door hardware, barn door hardware kits, sliding door hardware, rolling door hardware kits, barn door sliders, barn door rolling straps, barn door roller straps, rolling barn door rails, rolling barn door mounting brackets, rolling barn door brackets, rolling barn door rail brackets, rolling barn door end stops, rolling barn door end stop kit for rails, rolling barn door stop kit for rails, rolling barn door floor guide, rolling barn door center guide, rolling barn door splice kit, rolling barn door splicers, rolling barn door rail splicing kit, rolling barn door rail splice kit, rolling barn door rail splicers, rolling barn door pulls, rolling barn door handles, rolling barn door hardware components, rolling barn door hardware accessories, barndoor
I-26 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Rolling Barn Door Hardware&New
Hardware Components Only
250 lbs. load capacity per 2 straps for mounting doorsFasteners included- Sold as each
The doors of opportunity are rolling open
5”
2.62”
6.17”
4.12”
6.67”
2.75”
6.25”
2.5”
All Finishes Are Powder Coated
Satin Nickel (SN)Roller Straps & Finish1
11.75”
3.25”
Fleur-De-Lis Spade RoundStick
Horseshoe Cube Vista
BasicRectangle
10.5”
3”
6.8”
2.9”
5.5”
4.625”
Tri-Star
Rust (RST)Matte Black (BK)Oil Rubbed
Bronze (ORB)
rolling barn door hardware, interior rolling barn door hardware, quiet glide rolling barn door hardware, quiet glide barn door hardware, sliding barn door hardware, diy barn door hardware, barn door hardware kits, sliding door hardware, rolling door hardware kits, barn door sliders, barn door rolling straps, barn door roller straps, rolling barn door hardware components, rolling barn door hardware accessories, barndoor
I-27Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Click Here
Part # Style Finish PriceBDH-RSB-BK Basic Rectangle Matte Black $54.00 ea.
BDH-RSB-ORB Basic Rectangle Oil Rubbed Bronze $59.00 ea.BDH-RSB-SN Basic Rectangle Satin Nickel $59.00 ea.
BDH-RSB-RST Basic Rectangle Rust $64.00 ea.BDH-RSF-BK Fleur-De-Lis Matte Black $89.00 ea.
BDH-RSF-ORB Fleur-De-Lis Oil Rubbed Bronze $94.00 ea.BDH-RSF-RST Fleur-De-Lis Rust $99.00 ea.BDH-RSS-BK Spade Matte Black $89.00 ea.
BDH-RSS-ORB Spade Oil Rubbed Bronze $94.00 ea.BDH-RSS-RST Spade Rust $99.00 ea.BDH-RSR-BK Round Stick Matte Black $54.00 ea.
BDH-RSR-ORB Round Stick Oil Rubbed Bronze $59.00 ea.BDH-RSR-SN Round Stick Satin Nickel $59.00 ea.
BDH-RSR-RST Round Stick Rust $64.00 ea.BDH-RSH-BK Horseshoe Matte Black $54.00 ea.
BDH-RSH-ORB Horseshoe Oil Rubbed Bronze $59.00 ea.BDH-RSH-SN Horseshoe Satin Nickel $59.00 ea.
BDH-RSH-RST Horseshoe Rust $64.00 ea.BDH-RSC-BK Cube Matte Black $54.00 ea.
BDH-RSC-ORB Cube Oil Rubbed Bronze $59.00 ea.BDH-RSC-SN Cube Satin Nickel $59.00 ea.
BDH-RSC-RST Cube Rust $64.00 ea.BDH-RSV-BK Vista Matte Black $84.00 ea.
BDH-RSV-ORB Vista Oil Rubbed Bronze $89.00 ea.BDH-RSV-SN Vista Satin Nickel $89.00 ea.
BDH-RSV-RST Vista Rust $94.00 ea.BDH-RST-BK Tri-Star Matte Black $54.00 ea.
BDH-RST-ORB Tri-Star Oil Rubbed Bronze $59.00 ea.BDH-RST-SN Tri-Star Satin Nickel $59.00 ea.
BDH-RST-RST Tri-Star Rust $69.00 ea.
Rolling Barn Door Hardware&New
2 4 Foot, 6 Foot or 8 Foot Rail 3 Rail Brackets
4 Stop Kit For Rails
1” diameter solid aluminum rail For mounting the rail to the wallRecommended spacing every 16” between brackets
1”
4’, 6’ or 8’
2 ends stop finals
1.25”
.25” Thick
1.5”
End Stop Ball Stop
2.625”
2.375”
.72”
Long BracketFor Doors Up
To 2-1/4” Thick
Short BracketFor Doors Up
To 1-1/2” Thick
2.625”
.875”
1”
Hardware Components OnlyThe doors of opportunity are rolling open
All Finishes Are Powder Coated
Satin Nickel (SN) Rust (RST)Matte Black (BK)Oil Rubbed
Bronze (ORB)
3”
2.5”
3”
1.75”
Black rubber bumper included to prevent damageSold as each
Door Stop5
2.25”
1.375”
Dome Fleur-De-Lis Spade
rolling barn door hardware, interior rolling barn door hardware, quiet glide rolling barn door hardware, quiet glide barn door hardware, sliding barn door hardware, diy barn door hardware, barn door hardware kits, sliding door hardware, rolling door hardware kits, barn door sliders, rolling barn door rails, rolling barn door mounting brackets, rolling barn door brackets, rolling barn door rail brackets, rolling barn door end stops, rolling barn door end stop kit for rails, rolling barn door stop kit for rails, rolling barn door hardware components, rolling barn door hardware accessories, barndoor
I-28 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Part # Length Finish PriceBDH-R4-BK 4 Ft. Matte Black $50.40 ea.
BDH-R4-ORB 4 Ft. Oil Rubbed Bronze $55.00 ea.BDH-R4-SN 4 Ft. Satin Nickel $55.00 ea.
BDH-R4-RST 4 Ft. Rust $59.00 ea.BDH-R6-BK 6 Ft. Matte Black $77.00 ea.
BDH-R6-ORB 6 Ft. Oil Rubbed Bronze $84.00 ea.BDH-R6-SN 6 Ft. Satin Nickel $84.00 ea.
BDH-R6-RST 6 Ft. Rust $84.00 ea.BDH-R8-BK 8 Ft. Matte Black $95.00 ea.
BDH-R8-ORB 8 Ft. Oil Rubbed Bronze $103.95 ea.BDH-R8-SN 8 Ft. Satin Nickel $103.95 ea.
BDH-R8-RST 8 Ft. Rust $109.00 ea.
Part # Style Finish PriceBDH-RBL-BK Long Matte Black $9.00 ea.
BDH-RBL-ORB Long Oil Rubbed Bronze $10.00 ea.BDH-RBL-SN Long Satin Nickel $10.00 ea.
BDH-RBL-RST Long Rust $11.00 ea.BDH-RBS-BK Short Matte Black $9.00 ea.
BDH-RBS-ORB Short Oil Rubbed Bronze $10.00 ea.BDH-RBS-SN Short Satin Nickel $10.00 ea.
BDH-RBS-RST Short Rust $11.00 ea.
Part # Style Finish PriceBDH-ESTOP-BK End Stop Matte Black $23.00 pr.
BDH-ESTOP-ORB End Stop Oil Rubbed Bronze $24.00 pr.BDH-ESTOP-SN End Stop Satin Nickel $24.00 pr.
BDH-ESTOP-RST End Stop Rust $26.00 pr.BDH-BALLSTOP-BK Ball Stop Matte Black $64.00 pr.
BDH-BALLSTOP-ORB Ball Stop Oil Rubbed Bronze $66.00 pr.BDH-BALLSTOP-SN Ball Stop Satin Nickel $66.00 pr.
BDH-BALLSTOP-RST Ball Stop Rust $69.00 pr.
Part # Style Finish PriceBDH-DS-BK Dome (Non-Handed) Matte Black $18.00 ea.
BDH-DS-ORB Dome (Non-Handed) Oil Rubbed Bronze $19.00 ea.BDH-DS-SN Dome (Non-Handed) Satin Nickel $19.00 ea.
BDH-DS-RST Dome (Non-Handed) Rust $22.00 ea.BDH-DSFL-BK Left Stop, Fleur-De-Lis Matte Black $32.00 ea.
BDH-DSFL-ORB Left Stop, Fleur-De-Lis Oil Rubbed Bronze $34.00 ea.BDH-DSFL-RST Left Stop, Fleur-De-Lis Rust $37.00 ea.BDH-DSFR-BK Right Stop, Fleur-De-Lis Matte Black $32.00 ea.
BDH-DSFR-ORB Right Stop, Fleur-De-Lis Oil Rubbed Bronze $34.00 ea.BDH-DSFR-RST Right Stop, Fleur-De-Lis Rust $37.00 ea.BDH-DSSL-BK Left Stop, Spade Matte Black $32.00 ea.
BDH-DSSL-ORB Left Stop, Spade Oil Rubbed Bronze $34.00 ea.BDH-DSSL-RST Left Stop, Spade Rust $37.00 ea.BDH-DSSR-BK Right Stop, Spade Matte Black $32.00 ea.
BDH-DSSR-ORB Right Stop, Spade Oil Rubbed Bronze $34.00 ea.BDH-DSSR-RST Right Stop, Spade Rust $37.00 ea.
Rolling Barn Door Hardware&New
Hardware Components OnlyThe doors of opportunity are rolling open
All Finishes Are Powder Coated
Satin Nickel (SN) Rust (RST)Matte Black (BK)Oil Rubbed
Bronze (ORB)
Dome
2.25”
1.375”
Fleur-De-Lis
3”
2.5”
1.5”
1.125”
3”
1.75”
Spade
Floor GuidesAdjustable for various door widths up to 2-1/4”
RollerCenter guide
for heavilytextured doors
Center Guides5 Pulls (Optional)
9”
1.8125”
8.75”
1.625”
Depth: 1.625” Depth: 1.5”Depth: 1.25” Depth: 1.5”
2.75”
11”
Spade Fleur-De-Lis Universal Square
8.625”
1.8125”
Splice Kit (Optional)
Close-Up
For joining multiple tracksSteel support dowel included
rolling barn door hardware, interior rolling barn door hardware, quiet glide rolling barn door hardware, quiet glide barn door hardware, sliding barn door hardware, diy barn door hardware, barn door hardware kits, sliding door hardware, rolling door hardware kits, barn door sliders, rolling barn door floor guide, rolling barn door center guide, rolling barn door splice kit, rolling barn door splicers, rolling barn door rail splicing kit, rolling barn door rail splice kit, rolling barn door rail splicers, rolling barn door pulls, rolling barn door handles, rolling barn door hardware components, rolling barn door hardware accessories, barndoor
I-29Phone:1-800-835-4400 • Fax:1-800-835-4403Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
Click Here
Part # Style Finish PriceBDH-CGF-BK Fleur-De-Lis Matte Black $42.00 ea.
BDH-CGF-ORB Fleur-De-Lis Oil Rubbed Bronze $45.00 ea.BDH-CGF-RST Fleur-De-Lis Rust $48.00 ea.BDH-CGS-BK Spade Matte Black $42.00 ea.
BDH-CGS-ORB Spade Oil Rubbed Bronze $45.00 ea.BDH-CGS-RST Spade Rust $48.00 ea.BDH-RCG-BK Roller Matte Black $20.00 ea.BDH-CGD-BK Dome Matte Black $24.00 ea.
BDH-CGD-ORB Dome Oil Rubbed Bronze $29.00 ea.BDH-CGD-SN Dome Satin Nickel $29.00 ea.
BDH-CGD-RST Dome Rust $32.00 ea.
Part # Style Finish PriceBDH-SPH-BK Spade Matte Black $60.00 ea.
BDH-SPH-ORB Spade Oil Rubbed Bronze $65.00 ea.BDH-SPH-SN Spade Satin Nickel $65.00 ea.
BDH-SPH-RST Spade Rust $70.00 ea.BDH-FLH-BK Fleur-De-Lis Matte Black $40.00 ea.
BDH-FLH-ORB Fleur-De-Lis Oil Rubbed Bronze $45.00 ea.BDH-FLH-SN Fleur-De-Lis Satin Nickel $45.00 ea.
BDH-FLH-RST Fleur-De-Lis Rust $50.00 ea.BDH-UNH-BK Universal Matte Black $40.00 ea.
BDH-UNH-ORB Universal Oil Rubbed Bronze $45.00 ea.BDH-UNH-SN Universal Satin Nickel $45.00 ea.
BDH-UNH-RST Universal Rust $50.00 ea.BDH-SQH-BK Square Matte Black $40.00 ea.
BDH-SQH-ORB Square Oil Rubbed Bronze $45.00 ea.BDH-SQH-SN Square Satin Nickel $45.00 ea.
BDH-SQH-RST Square Rust $50.00 ea.
Part # Finish PriceBDH-DOWEL Matte Black $9.00 ea.
Rolling Barn Door Hardware&New
The new Flat Rail Rolling Door Hardware fromArchitectural Products will give your house a rugged, rustic feel.Not only easy to order, these convenient kits are easy to install.
6’ kits are suitable for use on doors up to 36” wide & 1-3/4 thick
12”
3”
3” HookStrap
12”
3”
3” StickStrap
5”
4.5”
3” TopMount
14”
5”
5” HookStrap
All Finishes Are Powder Coated Rust (RST)Matte Black (BK)
All Kits Include: 1 x 6’ Flat Rail (2” Wide), 2 Roller Straps,5 Rail Mounting Brackets, 2 Door Stops, 1 Floor Guide
& All Mounting Hardware (Rails are not pre-drilled)
Roller Straps
PullsSplicer
8.75”
1.625”
Depth: 1.25”
Universal
Depth: 1.5”
Square
8.625”
1.8125”
1”
4”
250 lbs. load capacity per 2 straps for mounting doors
Splicer for connecting lengths of rail
flat rail rolling barn door hardware, interior flat rail rolling barn door hardware, quiet glide flat rail rolling barn door hardware, quiet glide flat rail barn door hardware, sliding flat rail barn door hardware, diy flat rail barn door hardware, flat rail barn door hardware kits, sliding flat rail door hardware, flat rail rolling door hardware kits, flat rail barn door sliders, flat rail barn door rolling straps, flat rail barn door roller straps, flat rail rolling barn door rails, flat rail rolling barn door mounting brackets, flat rail rolling barn door brackets, flat rail rolling barn door rail brackets, flat rail rolling barn door end stops, flat rail rolling barn door end stop kit for rails, flat rail rolling barn door floor guide, rolling barn door hardware components, rolling barn door hardware accessories, barndoor
I-30 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Minimum order is $25.00 (Merchandise only). Orders less than this minimum will be billed as $25.00 plus shipping charges and tax, if applicable.
CATALOG IS PRICED IN U.S. DOLLARS
Click Here
Part # Style Finish Price
KitsFRDH-HKT3-BK 3” Hook Strap Matte Black $379.00 ea.
FRDH-HKT3-RST 3” Hook Strap Rust $406.00 ea.FRDH-HKT5-BK 5” Hook Strap Matte Black $469.00 ea.
FRDH-HKT5-RST 5” Hook Strap Rust $484.00 ea.FRDH-SKT3-BK 3” Hook Stick Strap Matte Black $319.00 ea.
FRDH-SKT3-RST 3” Hook Stick Strap Rust $332.00 ea.FRDH-TKT3-BK 3” Top Mount Matte Black $330.00 ea.
FRDH-TKT3-RST 3” Top Mount Rust $348.00 ea.Components (Available Separately)
FRDH-HS3-BK 3” Hook Strap Matte Black $117.00 ea.FRDH-HS3-RST 3” Hook Strap Rust $127.00 ea.FRDH-HS5-BK 5” Hook Strap Matte Black $163.00 ea.
FRDH-HS5-RST 5” Hook Strap Rust $173.00 ea.FRDH-SS3-BK 3” Hook Stick Strap Matte Black $88.00 ea.
FRDH-SS3-RST 3” Hook Stick Strap Rust $98.00 ea.FRDH-TS3-BK 3” Top Mount Matte Black $95.00 ea.
FRDH-TS3-RST 3” Top Mount Rust $119.00 ea.FRDH-BKT-BK Rail Mounting Bracket Matte Black $10.00 ea.
FRDH-FG Floor Guide For Wood Matte Black $1.79 ea.FRDH-4-BK 4’ Flat Rail Matte Black $45.00 ea.
FRDH-4-RST 4’ Flat Rail Rust $49.00 ea.FRDH-6-BK 6’ Flat Rail Matte Black $60.00 ea.
FRDH-6-RST 6’ Flat Rail Rust $70.00 ea.FRDH-8-BK 8’ Flat Rail Matte Black $85.00 ea.
FRDH-8-RST 8’ Flat Rail Rust $99.00 ea.FRDH-SPLICER Splicer For Rails Matte Black $19.00 ea.
FRDH-ES-BK End Stops Matte Black $30.00 ea.FRDH-ES-RST End Stops Rust $32.00 ea.BDH-UHN-BK Universal Pull Matte Black $40.00 ea.
BDH-UHN-RST Universal Pull Rust $50.00 ea.BDH-SQH-BK Square Pull Matte Black $40.00 ea.
BDH-SQH-RST Square Pull Rust $50.00 ea.
Flat Rail Rolling Barn Door Hardware New
Recommended