SIS Software Install Instructions Cookbook Multibeam Advisory Committee March 21, 2012 SIS 3.8.3 1...
Preview:
Citation preview
- Slide 1
- SIS Software Install Instructions Cookbook Multibeam Advisory
Committee March 21, 2012 SIS 3.8.3 1 Multibeam Advisory Committee
March 21, 2012
- Slide 2
- Contents How to install SIS software Configure the datagram
distribution software NOTE: These are directions for installing the
SIS software. If you are doing this to replace a corrupt database,
please see the SIS Configuration Backup and SIS Software Uninstall
cookbook. 2 Multibeam Advisory Committee March 21, 2012
- Slide 3
- SIS Software Install Insert the SIS software DVD. If a window
does not automatically open, browse to the DVD using a file
explorer and double click on the start.html file. Click on the SIS
SW Installation Link. Click Here 3 Multibeam Advisory Committee
March 21, 2012
- Slide 4
- SIS Software Install Once this SIS Software Installation opens
up, click on the Press here to install Seafloor Information System.
Click Here 4 Multibeam Advisory Committee March 21, 2012
- Slide 5
- SIS Software Install If a security warning pops up click run to
continue the installation. 5 Multibeam Advisory Committee March 21,
2012
- Slide 6
- SIS Software Install Choose your install language. 6 Multibeam
Advisory Committee March 21, 2012
- Slide 7
- SIS Software Install Click on the Next button to continue
installation. 7 Multibeam Advisory Committee March 21, 2012
- Slide 8
- SIS Software Install Verify that this is the version and build
of SIS you want to install. 8 Multibeam Advisory Committee March
21, 2012
- Slide 9
- SIS Software Install Make sure that SIS is selected as an
installable component. 9 Multibeam Advisory Committee March 21,
2012
- Slide 10
- SIS Software Install Choose where you want to store you raw
data and where you want to store your grid data files. 10 Multibeam
Advisory Committee March 21, 2012
- Slide 11
- SIS Software Install Define the IP number or hostname of the
Database server. If the database is going to be on the same machine
you are running SIS (the normal operation mode) enter localhost. 11
Multibeam Advisory Committee March 21, 2012
- Slide 12
- SIS Software Install Choose the install location for the SIS
software. The default value of C:\Program Files\Kongsberg
Maritime\SIS\ is the normal install location. 12 Multibeam Advisory
Committee March 21, 2012
- Slide 13
- SIS Software Install If you want Shortcuts to be put under the
Start menu in a SIS folder simply click Install. Otherwise define a
different folder name or click Do not create shortcuts. Multibeam
Advisory Committee March 21, 2012 13
- Slide 14
- SIS Software Install During the install process a dialog box
will appear asking about installing a MATLAB compiler runtime,
click OK. Multibeam Advisory Committee March 21, 2012 14
- Slide 15
- SIS Software Install After the install is done Reboot the
machine to finish the process. Multibeam Advisory Committee March
21, 2012 15
- Slide 16
- SIS Software Install Restart SIS and reconnect with the TRU
through the pulldown menu. If the TRU does not appear, Rescan, and
select it. Multibeam Advisory Committee March 21, 2012 16
- Slide 17
- SIS Software Install It is now time to import your PU settings
(offsets, device settings, etc). Under the File menu select Import
PU parameters. Multibeam Advisory Committee March 21, 2012 17
- Slide 18
- SIS Software Install A dialog box will appear. Browse to the
location you saved you PU parameters (normally in the
E:/sisdata/common/pu_param directory. Select your saved file and
click OK. Multibeam Advisory Committee March 21, 2012 18
- Slide 19
- SIS Software Install Dont worry if you see plenty of blinking
red fields after doing this. Go to the File menu and select
quit.everything will be ok. Multibeam Advisory Committee March 21,
2012 19
- Slide 20
- SIS Software Install Start up SIS again and connect to the TRU
through the pulldown menu. Multibeam Advisory Committee March 21,
2012 20
- Slide 21
- SIS Software Install It is now time to import all of you user
settings such as screen layouts, datagram subscribtions, external
sensors, etc. Go the the File menu and select User settings.
Multibeam Advisory Committee March 21, 2012 21
- Slide 22
- SIS Software Install You should only load user settings from a
machine with the same number of hard drives. This is not normally a
problem as the usual is to load settings from the same machine.
Click Ok. Multibeam Advisory Committee March 21, 2012 22
- Slide 23
- SIS Software Install The Import User Settings dialog box will
appear. Click on the file selection box for User Parameters
(circled in the figure above). Multibeam Advisory Committee March
21, 2012 23
- Slide 24
- SIS Software Install Select the User Settings parameters file.
This file will end in a.params suffix. Multibeam Advisory Committee
March 21, 2012 24
- Slide 25
- SIS Software Install Click on the file selection box for
Datagram subscriptions. Multibeam Advisory Committee March 21, 2012
25
- Slide 26
- SIS Software Install Select the Datagram subscriptions file.
This file will end in a.dgmsubs suffix. Multibeam Advisory
Committee March 21, 2012 26
- Slide 27
- SIS Software Install Click on the file selection box for Survey
templates. Multibeam Advisory Committee March 21, 2012 27
- Slide 28
- SIS Software Install Select the Survey template file. This file
will end in a.srvtpl suffix. Multibeam Advisory Committee March 21,
2012 28
- Slide 29
- SIS Software Install Click on the file selection box for
Projections. Multibeam Advisory Committee March 21, 2012 29
- Slide 30
- SIS Software Install Select the Projections file. This file
will end in a.proj suffix. Make sure you DO NOT select the file
that ends with a.srvtpl.proj suffix. Multibeam Advisory Committee
March 21, 2012 30
- Slide 31
- SIS Software Install Click on the file selection box for Frame
settings. Multibeam Advisory Committee March 21, 2012 31
- Slide 32
- SIS Software Install Select the Frames file. This file will end
in a.frames suffix. Multibeam Advisory Committee March 21, 2012
32
- Slide 33
- SIS Software Install Click on the file selection box for
External sensor settings. Multibeam Advisory Committee March 21,
2012 33
- Slide 34
- SIS Software Install Select the External Sensors file. This
file will end in a.extsens suffix. Multibeam Advisory Committee
March 21, 2012 34
- Slide 35
- SIS Software Install Click the Accept button now that you have
filled out all of the fields. Multibeam Advisory Committee March
21, 2012 35
- Slide 36
- SIS Software Install Click the Accept button. If you are
importing these settings from another sounder make sure that you
change the Sounders serial to match the sounder you are importing
for. Multibeam Advisory Committee March 21, 2012 36
- Slide 37
- SIS Software Install Click the Ok button, you are done
importing settings. Multibeam Advisory Committee March 21, 2012
37
- Slide 38
- SIS Software Install Quit SIS in order to finalize the loading
of the User settings. Multibeam Advisory Committee March 21, 2012
38
- Slide 39
- SIS Software Install Start up SIS again and connect to the TRU
through the pulldown menu. Multibeam Advisory Committee March 21,
2012 39
- Slide 40
- SIS Software Install The one parameter that the above method
does not correctly set (apparently) is the grid engines cell size.
To fix this select View -> Tear Off -> New Survey. Multibeam
Advisory Committee March 21, 2012 40
- Slide 41
- SIS Software Install Change the Number of cells in processing
grid: to 128x128 and change the Cell size (m) to 150 for the EM122
and 5 for the EM710. It might be necessary to change to EM710s grid
cell size to 10m depending upon the size of the survey area.
Multibeam Advisory Committee March 21, 2012 41
- Slide 42
- Datagram Distribution Configuration SIS as part of the install
process wiped out the datagram distribution parameters. Open the
software and add a source port of 4310 for Centerbeam Depth and a
the desired IP and destination port (for the Kilo Moanas EM120 you
should enter 192.168.1.40:5634 and for the EM710 you should enter
192.168.50:5635). Multibeam Advisory Committee March 21, 2012 42
R/V Kilo Moanas EM122 Data Distribution settings. R/V Kilo Moanas
EM710 Data Distribution settings.