Shaving Stand for Brush and Razor. - media.prusaprinters.org€¦ · My old shaving stand was small...

6.54 hrs

1 pcs

f

0.15 mm

k

0.40 mm

h

1

54.00 g

d

PrusaMK3/S

Print Files (.gcode) DOWNLOAD ALL FILES

Summary

My old shaving stand was small and unstable. So I made a new one a littlebigger and the top part is angled up to hold in the brush and razor better.

Household > Bathroom

stand shaving

Printed in PLA Filamentum Ivory White.

JeepingJohnny

Shaving Stand forBrush and Razor.

VIEW IN BROWSER

updated 11. 5. 2020 | published 11. 5. 2020

10.6 MB

6.54 hrs f 0.15 mm k 0.40 mm h PLA 54.00 g d PrusaMK3/S

updated 11. 5. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

2.7 MBupdated 11. 5. 2020

10.7 MBupdated 11. 5. 2020

592.5 KBupdated 11. 5. 2020

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

shaving-stand_015mm_pla_mk3s_6h33m.gcode

shaving-stand.3mf

shaving-stand.stl

shaving-stand-15.blend