Shakarganj Mills Limited

Steps Towards Advance Technology

“LPS, GIS & SMS SYSTEM”( LPS = Loading Point System

GIS=Geographical Information SystemSMS = Short Message Service)

By: Manzoor Hussain Malik

Senior Vice President (Agri.)

Shakarganj Mills Limited

Shakarganj Mills Limited

We are using advance technologies like LPS, GIS and SMS in Shakarganj Mills.

LPS System is used at Check Posts to identify the Sugarcane Loaded Vehicle with GPS Position.

GIS System is used for Grower Wise Survey with Field Pictures and GPS position.

SMS System is used to check the Current Yard Balance, Crushing & Recovery etc.

HOW LPS WORK

Following technologies are required for this system :-

1. GSM – Group Special Mobile (Telenor)

2. GPS – Global Positioning System

3. GPRS – General Packet Radio Service

(Mobile Internet)

4. Java Supported Symbian Mobile (Nokia C5-03)

HOW LPS WORK

Following Items must be checked before the start of Software :-

1. Time/Date must be correct

2. Operator Signals must be available

3. Mobile Internet must be enabled on SIM

4. Mobile must be configured for Internet

SOFTWARE FUNCTIONS FOR LPS & GIS SYSTEM

LPS & GIS SYSTEM

New Registration Check Registration Configuration 0 Pending Photos

Powered by Shakarganj

Feedback of submitted

record

To submit new record

To define Company and

Area

Captured Images

waiting to Upload

Snap of Vehicle Registration

These snaps are taken at Check Post and Send to SML Server through Software with a unique code.

Snap of Vehicle with Driver

Snaps of Vehicle

Verification

The snaps and unique code are verified at Token-I

Verification

The snaps and unique code are verified at Token-I

SNAPING PROCESSSTEP-1: Identification

Image-1 : Data of Board

SNAPING PROCESSSTEP-1: Identification

Image-2 : Grower or CNIC Image

SNAPING PROCESSSTEP-1: Identification

Image-3 : Growers Home Image

SNAPING PROCESSSTEP-2: Field Side - I

Image-1 : Data of Board

SNAPING PROCESSSTEP-2: Field Side - I

Image-2 : Field Close

SNAPING PROCESSSTEP-2: Field Side - I

Image-3 : Field Overall

SNAPING PROCESSSTEP-3: Field Side - II

Image-1 : Data of Board

SNAPING PROCESSSTEP-3: Field Side - II

Image-2 : Field 2nd Side Close

SNAPING PROCESSSTEP-3: Field Side - II

Image-3 : Field 2nd Side Overall

SNAPING PROCESSSTEP-4,5,6: If needed (Separate Site)

Image-1 : Data of Board

Image-2 : Field Close

Image-3 : Field Overall

(Repeat step 3)

Complete Set of Pictures with Relevant Data

GEOGRAPHICAL LOCATION OF GROWER

Sugarcane Plot Marked

A GSM modem is a specialized type of modem which accepts a SIM card, and operates over a subscription to a mobile operator, just like a mobile phone.

A Subscriber identification module (SIM) is used with GSM Modem to Send and Receive SMS.

Following Equipments are required for SMS System

SENDING TEXT MESSAGE

At your Cell Phone, write text message with the given Codes and send to Specific Number

To: 03418205328

Text:Balance

RECEIVING TEXT MESSAGE

System will automatically read the message and send back required information after verification of Sender Number.

From: 03418205328

Text:Yard Balance = 258Crushing = 9,750Recovery = 9.73