View
217
Download
1
Category
Preview:
Citation preview
Seven of the biggest names in technology have come together to create a world-first platform for
televisions; Digital Direct Broadcast.
W-Fi Dongle
Internet connectivity in DDB LED , DDB LCD
DDB product enables the user to access Internet. Internet functionality can be accessed by using below mode of Connectivity :
1 LAN Connection
2 Data Card
3 Wireless
Data Card
LAN Cable with RJ-45 Connector
Step - 1 : To use Internet feature through LAN (Wired)
Internet connectivity via Ethernet using LAN Cable
Ethernet Port
Connect LAN Cable to Ethernet Port
LED Blinks once active LAN connected
Note : Please check below mentioned in case the LED does not blink a) Check Proper internet Connectivity is available from Internet Service Provider. b) Check the correct LAN Cable is properly connected . (Cable for Telephone line will not work for internet)
Connect LAN Cable (from Modem / Internet source) to Ethernet Port of DDB Product.
Once the LAN Cable is connected LED (near Ethernet Port ) will start blinking, if LAN is Active (up with Internet Connection) If LED (near Ethernet Port) is not Blinking, then check Internet Cable / Internet Connectivity.
Step - 2 : Once the LAN Cable is connected & LED starts blinking near Ethernet Socket.
Internet connectivity via Ethernet using LAN Cable
Press “Source” Key
Press “OK” Key
Select NET CONNECT using Navigation Key
Select Setting using Navigation Key
Press “Source” Key from Remote of DDB TV
Select “NET CONNECT” by using Navigation Key & Press “OK” Key
Select “Setting” by using “BLUE” Colored Key to change Network Setup
Note : (I.P. Address Settings will be provided by the Internet Service Provider to the Customer)
Internet connectivity via Ethernet using LAN Cable
Step - 3 : After Choosing the “Setting”, Option Press “OK” Key in Remote.
Use Navigation Keys
Network Setup will appear with 3 Options of Connectivity (Wired, Wireless and Data Card)
Choose the required Connectivity with respect to the Connectivity available at Customer Place
For LAN connectivity
Select “Wired” Option using Navigation Keys and
Press Yellow Key to Enable the Wired Connection
Press “Yellow” Key
Press “OK” Key
Press “OK” Key, Confirmation Pop up will be displayed
Press “OK” Key to Enable the Wired Connection OR
Press “OK” Key
Note : (I.P. Address Settings will be provided by the Internet Service Provider to the Customer)
Internet connectivity via Ethernet using LAN Cable Step - 3 (a) : After enabling Wired Connection
Select IP Address Configuration for “Auto” / “Manual”
If we Select “Auto” using “Navigation” Key & “OK” Key
On Selection of Auto Settings -> IP Address. Gateway, Subnet Mask, Primary DNS and Secondary DNS
values will be configured automatically as per the Network Available at Customer Place.
LAN Cable not Connected
LAN Cable Connected
Press “OK” Key
Press “OK” Key
Speed of Internet will depends on the connectivity received from the Internet Service Provider To get better Internet connectivity, use Broad Band connectivity
If LAN Cable is not Connected, Pop Up will be displayed
Note : (I.P. Address Settings will be provided by the Internet Service Provider to the Customer)
Internet connectivity via Ethernet using LAN Cable
Using Number Key, Enter detail
Speed of Internet will depends on the connectivity received from the Internet Service Provider To get better Internet connectivity, use Broad Band connectivity
Step - 3 (b) : After enabling Wired Connection
If we Select “Manual” using “Navigation” Key & “OK” Key
We have to change the Settings -> IP Address. Gateway, Subnet Mask, Primary DNS and Secondary DNS
values manually by using Navigation & Numeric Keys as per the Network Available at Customer Place
Manually enter the IP Address. Gateway, Subnet Mask, Primary DNS and Secondary DNS value
Note : (I.P. Address Settings will be provided by the Internet Service Provider to the Customer)
Internet connectivity via Ethernet using LAN Cable
Step - 4 : Once the IP Address setting are configured
Press “OK” Key in Remote, It will be Connected to Internet and
Automatically it will go to Previous Menu (Network Setup)
Press OK to save the network configuration & press back key to go on main page.
Press “OK” Key
Speed of Internet will depends on the connectivity received from the Internet Service Provider
To get better Internet connectivity, use Broad Band connectivity
Step - 5 : After Completing of all “ Ethernet Settings” >> Press “Back” Key on Remote to return into main Screen
Select the application you want to use.
Select any eNet options like : V Apps, eMail, Web or Chat to browse the Internet.
Press “Back ” Key
Internet connectivity via Ethernet using LAN Cable
Step - 1 : To use Internet features through Wi-Fi Dongle (Wireless) Wi-Fi Network is Required
Connect Wi-Fi Dongle in USB Port of DDB TV
Configure the Wi-Fi Dongle with the Wireless Connectivity available at Customer Place
Enter the User Name and Pass Word of Local Wi-Fi Network (If applicable)
Connect Wi-Fi Dongle with USB Port
Note : Customer has to purchase Wi-Fi Dongle to use Wi-Fi Network
Wi-Fi Dongle
Internet connectivity via Wi-Fi Dongle using Wi-Fi N/W
Step - 2 : Once the LAN Cable is connected & LED starts blinking near Ethernet Socket.
Internet connectivity via Ethernet using LAN Cable
Press “Source” Key
Press “OK” Key
Select Multimedia using Navigation Key
Select Setting using Navigation Key
Press “Source” Key from Remote of DDB TV
Select “NET CONNECT” by using Navigation Key & Press “OK” Key
Select “Setting” by using “BLUE” Colored Key to change Network Setup
Note : (I.P. Address Settings will be provided by the Internet Service Provider to the Customer)
Step - 3 : After Choosing the “Setting” Option >> Press “OK” Key in Remote
Network Setup will appear with 3 Options of Connectivity (Wired, Wireless and Data Card)
Choose the required Connectivity with respect to the Connectivity available at Customer Place
For Wireless connectivity
. Select “Wireless” Option using Navigation Keys and
Press “Yellow” Key to Enable the Wireless Connection
Internet connectivity via Wi-Fi Dongle using Wi-Fi N/W
Use Navigation Keys
Press “Yellow” Key
Press “OK” Key Press “OK” Key
Press “OK” Key, Confirmation Pop up will be displayed
Press “OK” Key to Enable the Wireless Connection OR
Note : 1 .I.P. Address Settings will be provided by the Internet Service Provider to the Customer
2. In case of Manual the data will be manually entered like in case of Wired Setup
Step - 3 (a) : After enabling the “ Wireless” Option
Press OK Keys
Press “OK” Key
Speed of Internet will depends on the connectivity received from the Internet Service Provider To get better Internet connectivity, use Broad Band connectivity
If Wi-Fi Dongle is not Connected Pop Up will be displayed
Wi-Fi Dongle not Connected
Internet connectivity via Wi-Fi Dongle using Wi-Fi N/W
Wi-Fi Dongle Connected
Select IP Address Configuration for “Auto” / “Manual”
If we Select “Auto” using “Navigation” Key & “OK” Key
On Selection of Auto Settings -> IP Address. Gateway, Subnet Mask, Primary DNS and Secondary DNS
values will be configured automatically as per the Network Available at Customer Place.
Note : (I.P. Address Settings will be provided by the Internet Service Provider to the Customer)
Step – 4 : Once the AUTO Option is Selected by using Navigation Keys it will be Highlighted with Blue Color
Press “OK” Key in Remote, It will be show Available WI – FI Networks at Customer Place
Select the Required Wi- Fi Network using Navigation Keys (enter password if Wi-Fi is secured)
Press “OK” Key, DDB will be Connected with Internet through Selected Wireless network
Press Back Key to go to Source Menu
Press OK Keys
Internet connectivity via Wi-Fi Dongle using Wi-Fi N/W
Speed of Internet will depends on the connectivity received from the Internet
Service Provider
To get better Internet connectivity, use Broad Band connectivity
Press yellow Key to get virtual Keypad on screen to enter Password.
Step - 5 : After Completing of all “ Settings” >> Press “Back” Key on Remote to return into main Screen
Select any Net options like : V Apps, eMail, Web , Chat to browse the Internet.
Press “BACK” Key
Internet connectivity via Wi-fi
Step - 1 : To use Internet features through Data Card
Connect Data Card in USB Port of DDB TV.
Configure the Data Card with DDB TV
Enter the User Name and Pass Word of data Card
Note : - Customer has to use his own DATA CARD. For Good Connectivity, Data Transfer Rate should be more than 1.2Mbps
Connect Data Card with USB Port
Internet connectivity using Data Card
Step - 2 : Once the LAN Cable is connected & LED starts blinking near Ethernet Socket.
Internet connectivity via Ethernet using LAN Cable
Press “Source” Key
Press “OK” Key
Select NET CONNECT using navigation key
Select Setting using Navigation Key
Press “Source” Key from Remote of DDB TV
Select “NET CONNECT” by using Navigation Key & Press “OK” Key
Select “Setting” by using “BLUE” Colored Key to change Network Setup
Step - 3 : After Choosing the “Setting”, Option >> Press “OK”. Key. in Remote
Press “OK” Key
Press “OK” Key
Network Setup will appear with 3 Options of Connectivity (Wired , Wireless and Data Card)
Choose the required Connectivity with respect to the Connectivity available at Customer Place
For Data Card connectivity
Select “Data Card” Option Using Navigation Keys
Press “OK” Key on Remote to Configure the Data Card Settings
Check the displayed Device Name, Device Number, User Name and Pass Word of the Data Card
If Data Card data is Correct with respect to Service Provider then Press “Green” Key to Connect
If it is not Correct then Press “Blue” Key to Edit the Data Card Details with respect to Service
Provider
Internet connectivity using Data Card
Note : - Customer has to use his own DATA CARD. For Good Connectivity, Data Transfer Rate should be more than 1.2Mbps
Press“ Blue” Key to
Open Key Board
Step - 4 : After Choosing the “DATA CARD Setting” Option
Press “Blue” Key to open Virtual Keyboard to Enter Customer Data Card Device Name
Internet connectivity using Data Card
Press“ Blue” Key
to Clear Data
Use “Blue” Key to Clear the Existing Operator Name (Airtel)
Existing Operator Name is Cleared
Operator Name is cleared
Use Navigation
Keys
Step - 4 : After Clearing existing Operator Name
Internet connectivity using Data Card
Enter the Customer Data Card Device Name (Operator Name)
Select required Letter using Navigation keys on Virtual Key Board and Press “OK” Key on Remote
Use “Yellow“ Key to create Symbols, CAPS Letters and Small Letters in the Virtual Key Board
Press Yellow
Key Virtual Key Board with Symbols Virtual Key Board with CAPITAL Letters
Press “Green”
Key
Step - 4 : Once the Device Name (Data Card) is Selected as per the Service Provider (Ex:- TATA Photon +)
Internet connectivity using Data Card
Press “Green” Key to Save & Exit to Previous Page
Select Device Number using Navigation Keys
Repeat the same Process to Enter Device Number, User Name & Password
Select Auto Reconnect to be “ON” using Navigation Keys
Note : - Customer has to use his own DATA CARD. For Good Connectivity, Data Transfer Rate should be more than 1.2Mbps
Press “Green”
Key
Step - 4 : Once all the details are Entered Correctly (Device Name, Device Number, User Name & Password)
Internet connectivity using Data Card
Press “Green” Key to Connect to Internet
POP UP will be Displayed in the screen “Device Connect Successfully”
Press “OK” Key to save the Settings and Automatically It will go to Previous Menu
Press Back Key to got o Source Menu
Now the Internet Connection is UP
We can Access Internet through Data Card
Internet connectivity via Ethernet using LAN Cable
Step – 6 : After Connecting the Internet Connectivity
Press “OK” Key
Select “V Portal” by using Navigation Key and Press “OK” Key in Remote
Different Option Like You Tube, Face book, Twitter will be available
Internet connectivity via Ethernet using LAN Cable
Press “OK” Key
Step – 6 : After Connecting the Internet Connectivity
Select “WEB” by using Navigation Key & Press “OK” Key in Remote
This function enables to browse the website by entering the link at URL text box of browser.
User’s favorite pages with their thumb links are displayed at the front page
Internet connectivity via Ethernet using LAN Cable
Press “OK” Key
Use “RED” / “Blue” Key to change Chat Option
Step – 6 : After Connecting the Internet Connectivity
Select “ Chat” by using Navigation Key & Press “OK” Key in Remote
This function is used for instant messaging support with most popular Chat Servers
(i.e. Google Talk, Face book - for text Chat only
Internet connectivity via Ethernet using LAN Cable
Press “OK” Key
Step – 6 : After Connecting the Internet Connectivity
Select “email” by using Navigation Key & Press “OK” Key in Remote
This function is used to send and receive mails from the configured mail server.
UPnP- Universal Plug n Play
• UPnP stands for Universal Plug and Play- This function
allows the devices on your home network to discover each other and access services.
• This function is also used for streaming media on the network.
• To access this feature Internet must be connected; TV and the DLNA certified device both must be on same network.
• Select “UPnP” option to access the multimedia content from the host(DLNA certified device).
• Press Yellow key to filter the mobile files, without filtering you can’t access mobile files.
File Sharing
• To access this feature, enter the IP address of Desktop/Laptop in given window of HOST IP.
• Press OK key to access the shared folder. • Create a share in Windows PC. • Right click on folder to be shared. Click on properties. • Got to sharing Tab. Enable share option and click ON. • User can create the sharing with different security levels. • Based on the security level (configurations) File sharing client • Procedure to Share Folder in PC: • Required User name & Password to access the shared media contents. • To enter username & password, press yellow key. • Press green key to connect to the Host device. NOTE: You cannot access mobile files through File Sharing.
Qwerty Keypad Remote can be used for better browsing experience by connecting RF dongle into USB port. It
Works as Keypad & Mouse of Computer.
Qwerty Remote (RF Remote , Part Number : FM-1100065181)
This Section of Remote Works as Mouse of Computer
Left Key
(Mouse
Key)
Right Key
(Mouse
Key)
This Key works as Flying
Cursor (to access Press &
Hold this Key and Face
towards TV)
RF Dongle
To use Qwerty Remote, First we need to insert RF Dongle in the USB Port of DDB TV.
Qwerty Remote will not work if the RF Dongle is not inserted properly in the USB Port of DDB TV.
Key F1 works as a RED Key F2 work as a GREEN Key F3 work as a YELLOW Key F4 work as a BLUE Key F5 work as Internet key Key F6 work as 3D key Key F7 works as D2H key. Key “Alt” works as MOSAIC key. Key “Page Up” works as DTV menu. Key “Page Down” works as ATV Menu.
Wi-Fi Dongle
Wi-Fi Dongle
(USB,WIFI DON,NETCORE,NW360,300Mbps,5502 , Part Number : SP-1100092772)
Wi-Fi Dongle is required if DDB TV Customer want to access Internet through Wi-Fi Network.
Wi-Fi Dongle is connected in the USB Port of DDB TV
USB Hub can be used to connect additional USB Devices.
If Customer want to connect more than one accessories to the USB Port then Customer has to use USB Hub
In this USB Hub 4 Slots are provided to which it is possible to use 4 accessories like : Wi-Fi Dongle Data Card,
Qwerty Remote Dongle, & USB.
Multiple USB Port to connect USB Devices
1. It is recommended to use only one USB Device at a time in USB Hub 2. If any of the device not detected or not working properly then Remove the particular Device or
Hub & reconnect. If still not detecting then Switch OFF & Switch ON Mains. 3. USB Port can give max 500mA current to the connected Device
USB Hub
(USB,HUB 4 PORTS,i-BALL P423/AMKETTE,7525 Part Number : SP-1100092897)
Matrix for DDB LED / LCD Accessories
Screen Size of DDB LED / LCD
USB HUB Qwerty Remote Wi-Fi Dongle
32”
To be Purchased additionally by the Customer To be Purchased Additionally by the Customer
42”
46”
Will be supplied with Product from factory
58”
55” Will be supplied with Product from factory
65” Will be supplied with Product from factory
Recommended