Service Learning Project SLICE Prototype Fabrication Experience Ability Switch Test Box

Service Learning ProjectSLICE

Prototype Fabrication Experience

Ability Switch Test Box

Ability Switch Test Box

Ability Switch in Use

Electronic Circuit

Power source Current Path Load Control (Indicator)

Schematic Diagram

Electronic Circuit

Open Circuit

Open Circuit

Closed Circuit

Closed Circuit

Resistance/resistor symbol.

Typical fixed resistors.

Carbon Composition fixed Resistors

Color-code bands on a 4-band resistor.

100 Ohms Resistor, ¼ watt

Ability Switch for Special Need Students

Switch Push Button

Switches Push Button

Phono Plug

Phono Jack

Light Emitting Diode(Anode to positive)

Light Emitting Diode

Light Emitting Diode

Battery Box

Battery Box

Bring the Wires Inside

Holes for Jack & LED

Jack & LED Wired

Jack & LED Wired

LED should be flush mounted inside box

After solder & test apply Hot Glue to LED

Completed Inside of Box

Add Label to back side of box

Label applied

Final Test