View
214
Download
2
Category
Preview:
Citation preview
Weight:Complete solenoid: appr. 320 gArmature: appr. 45 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Long life expectancy through plasticbobbin armature bearing.* On request, the solenoid can also besupplied with service-free DU armaturebearing for maximum durability.
Force vs. Stroke diagram F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Force vs. stroke characteristics measured withoutreturn spring
H D* 62 06 – F – 24 V DC 100 % ED Order specifications
H Linear solenoidD* DU armature
62 SizesDesign type
06
4686-R
Pull type solenoidThrust type solenoid
Combi type solenoid with return spring2)
Coil terminalsF Flying leads (10 cm standard length)A Push-on connector (optional)
24 Nominal voltage (standard voltage)3)
100 % ED Perm. duty cycle under air cooled conditions (LK)
H6206-F
24 V DC 100% ED
2) Series H 6286-R-... solenoids are available withreturn spring F (0 mm) = 2.5 N and F (15 mm) =0.75 N
3) Other DC voltages are available on request.
100 50 30 15 5 % Perm. duty cycle (ED)4)
11 20 33 50 130 W Nominal coil power Pn45 16 ms Actuation time (ED)
4) If solenoid is mounted directly onto a flat metalsurface of at least 160 cm2, the duty cycle can beextended up to 1.3 x nominal rating
0 5 10 15 20
s/mm
F/N
0,81
2345
8
100 %ED
100
50
3015
510
20
806050
30
H62 Series Linear Solenoid Thrust and/or Pull Type
Doc
umen
t LN
SH
62/1
2
Rev
isio
n 003
Preferred types competitively priced and available on a quick delivery.
H6286-R-F-24VDC 100%EDH6206-F-24VDC 100%EDH6246-F-24VDC 100%ED
Email: sales@impulseautomation.co.ukWebsite: www.impulseautomation.co.uk
Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.
Impulse Automation LimitedUnited Kingdom
Company Registration 665193
Ø13
10
5,5
50
63 ±0,5
4
Ø4
1225
27
M344
3834
27
M3
50 30,5±0,5
82,5
44
38
34
27
M3
Ø13
1225
27
M3
10+1
M4
Dimensions given with armature in fully home position–––––––>Direction of stroke
Dimensions given with armature in fully home position–––––––>Direction of stroke
H6206 pull type solenoid
H6246 thrust type solenoid
Ø13
10
5,5
50
93,5
4
Ø4
1225
M3
27
44
38
34
27
M3 30,5 0,5
10+1
M4
Dimensions given with armature in fully home position–––––––>Direction of stroke
H6286-R combi type solenoid with return spring
H62 Series Linear Solenoid Thrust and/or Pull Type
Doc
umen
t LNSH62/22
R
evis
ion
003
Email: sales@impulseautomation.co.ukWebsite: www.impulseautomation.co.uk
Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.
Impulse Automation LimitedUnited Kingdom
Company Registration 665193
Recommended