View
229
Download
0
Category
Preview:
Citation preview
KUBOTAEXCAVATORS
WHOLEGOODS PRICE LIST EFFECTIVE MARCH 17, 2014
These pages are a complete revision of thissection of your price book.
All prices are effective March 17, 2014.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-1
EQUIPMENT = 24.5%IMPLEMENTS = 15%PARTS = 8.5%
KUBOTAK Series K008-3T4
K008-3T4 Hydraulic Excavator
FEATURES ENGINE Rubber Tracks D722 Kubota E-TVCS Tier 4 Diesel Engine 2-Post Foldable ROPS 3 Cylinder, 4 Cycle Variable Width Track Frame 10.1 Net HP @ 2050 rpm Kubota 2 Hydraulic Pump Design 2 Gear Type Pumps OPERATIONAL DIMENSIONS Two Operating Pattern Selection System Max Digging Depth 5’ 8” Standard Front Dozer Blade Max Digging Radius @ Ground Level 9’ 11” 360 Degree Full Rotation Max Vertical Digging Depth 4’ 6” 55º Left And 60º Right Boom Swing Angle Max Dumping Height 6’ 8” 5.5 GPM Auxiliary Hydraulics Port Five Second Quick Preheat System DOZER BLADE DIMENSIONS Key Switch Stop System Width 28” / 34” Self Bleed Fuel System Height 7.9” Two Speed Travel Lift Above Ground 7.9” Drop Below Ground 7.1” BASIC UNIT K008T4, Rubber Tracks, 2-Post Foldable ROPS PERFORMANCE Digging Force @ Bucket (K9776) 2200 lbs. DIMENSIONS AND OPERATING WEIGHT Digging Force @ Dipper Arm 1010 lbs. K008T4 With K9776 Bucket Travel Speed 1.2 / 2.5 mph Overall Length 9’ 0” Climbing Ability 27% / 15 ° Overall Width 2’ 4” ~ 2’ 10” Ground Pressure 3.5 psi Overall Height 7’ 4” Lift Capacity 660 lbs. Operating Weight * 2200 lbs. Over End Ground Clearance 5.9” Blade Grounded 2 Ft. Load Point Height * Includes operator’s weight, 175 lbs. 6 Ft. Load Radius
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-5
KUBOTAK Series K008-3T4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
K008T4 2028 $21,740.00
With:
PART 2
K9775 36 $346.00
K9776 90 $419.00
K7759 36 $555.00
K7760 47 $564.00
K7768 55 $579.00
K7769 69 $645.00
PART 3
K7748 15 $287.00
KXB310Q 165 $5,630.00
K7761 99 $572.00
K7990 2.2 $575.00
K7773 5 $985.00
Description
K7802 50 $119.00
K7812 2.5 $20.00
PART 4K7787 154 $786.00
Required for KXB310Q installation on K008-3 & K008-3T4
For hydraulic breaker maintenance only. Requires hose assembly. Order 70003-00677 from parts.
Optional kit for use in close proximity with grass, brush, timber and similar material with potential for ignition. Requires K7812 Spark Arrestor Screen
Required for K7802 installation.
Rubber Tracks, 2-Post Foldable ROPS, Dozer Blade, Dipper Arm, and Counterweight
ROPS / OPG (Top Guard, Level I)
12 inch 0.63 cu. ft. H.D. Bucket (Bolt-on teeth)
16 inch 0.9 cu. ft. H.D. Bucket (Bolt-on teeth)
KXB310Q Hydraulic Hammer Tool Information
Spade Tool (Transverse To Boom)77700-00406
Hydraulic Breaker BracketRequired for KXB310Q Pin-On configuration.
kit, 9.8' long. Order 70000-03824 from Parts
Accumulator Charge Kit
77700-00403
Spark Arrestor Muffler Kit
Spark Arrestor Screen
Part Nos.77700-0033877700-00320
ATTACHMENTS
and K7990 Hose Kit
Hydraulic Breaker, 200 ft. lbs. ratedIncludes manual, one moil point and one chisel point.
For K008-3 & K008-3T4 requires K7761 Bracket
DESCRIPTION
For K008 requires K7761 Bracket and a longer hose
Replacement 2-Post Foldable ROPS
Replacement Moil PointReplacement Chisel PointSpade Tool (Parallel To Boom)
10 inch 0.49 cu. ft. H.D. Bucket (Bolt-on teeth)
Two Way Service Port Hydraulic KitThe K7748 converts the auxiliary hydraulics from one way to two way flow. Includes manual, hydraulic hoses, and fittings
10 inch 0.49 cu. ft. Bucket (Welded teeth)
14 inch 0.74 cu. ft. Bucket (Welded teeth)
BUCKETS
8 inch 0.35 cu. ft. H.D. Bucket (Bolt-on teeth)
MODEL K008T4 BASIC UNIT
Excavator Basic Unit
Hydraulic Breaker Hose Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-6
KUBOTAK Series U17VR1
U17VR1Zero Tail Swing Hydraulic Excavator
FEATURES ENGINEZero Tail Swing D902 Kubota E-TVCS Tier 4 Diesel Engine Rubber Track Model, Variable Track Gauge 3 Cylinder, 4 Cycle ROPS/OPG (Top Guard, Level I) 4-Post Canopy 15.2 Net HP @ 2300 rpm High Back Suspension Seat Kubota 3 Hydraulic Pump Design Operational Dimensions 1 Gear, 2 Variable Displacement Pumps Max Digging Depth 7’ 7” Hydraulic Joystick Controls With Wrist Rests Max Digging Radius @ Ground Level 12’ 7” Two Operating Pattern Selection System Max Vertical Digging Depth 6’ 3” Standard Front Dozer Blade with Extensions Max Dumping Height 8’ 0” 360 Degree Full Rotation 65 Degree Left, 58 Degree Right Boom Swing DOZER BLADE DIMENSIONS 7.3 Gpm Auxiliary Hydraulics Port Width 3’ 3” / 4’ 1” Five Second Quick Preheat System Height 10.3” Key Switch Stop System Lift Above Ground 11.0” Short Pitch Rubber Tracks Drop Below Ground 7.5” Self Bleed Fuel System Two Speed Travel PERFORMANCE Digging Force @ Bucket (K7970) 3417 lbs Basic Units Digging Force @ Dipper Arm 1918 lbs U17VR1, Rubber Tracks, 4-Post ROPS/OPG (Top Travel Speed (Low) 1.4 mph Guard, Level I) Travel Speed (High) 2.6 mph Climbing Ability 36% / 20° Dimensions and Operating Weight Lift Capacity 1,140 lbs U17VR1, Rubber Tracks, 4-Post ROPS/ OPG (Top Over End Guard, Level I) Blade Grounded Overall Length 11’ 7” 2.0 ft Load Point Height Overall Width 3’ 3” / 4’ 1” 8.0 ft Load radius Overall Height 7’ 8” Operating Weight 3814 lbs* Ground Clearance 5.9” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-7
KUBOTAK Series U17VR1
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
U17VR1 3527 $28,300.00
K7966 28 $772.00
K7970 80 $768.00
$29,840.00
18” 1.5 cu. ft. Trenching Bucket
Dipper armCounterweight
ATTACHMENTS:
Quick Coupler
Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) CanopyDozer Blade
STANDARD UNIT U17VR1 COMPLETE ORDER AND PRICE
BASIC UNIT:
EXCAVATOR WITH:
DESCRIPTION
HOW TO SELECT A U17VR1 EXCAVATOR(Sample Order Information Page)
Below is an example of a complete U17VR1 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a U17VR1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-8
KUBOTAK Series U17VR1ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
U17VR1 3527 $28,300.00
With:
PART 2
K7779A 70 $657.00
K7780A 78 $678.00
K7781 88 $748.00
K7785 95 $930.00
K7966 28 $772.00
K7967 50 $407.00
K7968 92 $618.00
K7969 70 $734.00
K7970 80 $768.00
K9607 12 $213.00
PART 3KXB360Q 247 $6,915.00
K7639 40 $583.00
K7754 54 $627.00
K7764 99 $673.00
K7773 5 $985.00
Description
K9919 20 $124.00
K9773 7 $323.00
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight
Canopy Work Light Kit
Travel Alarm Kit
Spade Tool (Parallel To Boom)Spade Tool (Transverse To Boom)
Replacement Moil PointReplacement Chisel Point
77700-0033977700-0032177700-0040477700-00407
KXB360Q Hydraulic Hammer Tool Information
Part Nos.
Emits an audible signal when traveling forward or reverse
HYDRAULIC BREAKER BRACKET
Required for KXB360Q Pin-On configuration
ACCUMULATOR CHARGE KIT
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
HYDRAULIC BREAKER BRACKET
Required for KXB360Q Quick Attach configuration
Includes manual, one moil point and one chisel point.
HYDRAULIC BREAKER HOSE KIT
Required for all KXB360Q installations
Requires K7639 hose kit and a mount bracket (K7754 or K7764)
Set of two ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
ATTACHMENTSHYDRAULIC BREAKER, 300 ft. lbs. rated
Excavator Basic Unit
DESCRIPTION
MODEL U17 BASIC UNITS
12 inch 1.0 cu. ft. Trenching Bucket
16 inch 1.3 cu. ft. Trenching Bucket
Bucket Hangers
18 inch 1.5 cu. ft. Trenching Bucket
Quick Coupler
Includes two mounting pins, 1 locking pin, and hardware.
9 inch 0.78 cu. ft. Trenching Bucket
16 inch 0.95 cu. ft. 2-Hole H. D. Bucket
18 inch 1.1 cu. ft. 2-Hole H. D. Bucket
QUICK ATTACH BUCKETS
BUCKETS
PIN-ON BUCKETS
9 inch 0.52 cu. ft. 2-Hole H. D. Bucket
12 inch 0.74 cu. ft. 2-Hole H. D. Bucket
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-9
KUBOTAK Series U17VR1
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4
K9782 20 $1,442.00
K9943A 3 $78.00 RETRACTABLE SEAT BELT OPTION (3”)
REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I)
ROPS / OPG (Top Guard, Level I)
As required in some states for OSHA compliance.
DESCRIPTION
ALLIED ATTACHMENT CONTACTS
DESCRIPTION CONTACT
Earth Auger Model D450
McMillen 503 Gay Street Delhi, Iowa 52223 (563) 922-2981 Fax (563) 922-2700
Vibratory Compactor Model 300
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel. (404) 435-6947, Fax: (216) 431-2601 Website: http://www.AlliedCP.com
Available from Parts 70000-01602 Spark Arrestor (Screen Type)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-10
KUBOTAK Series KX018-4
KX018-4 Hydraulic Excavator
FEATURES ENGINERubber Tracks Model, Variable Track Gauge D902 Kubota E-TVCS Tier 4 Diesel Engine ROPS/OPG (Top Guard, Level I) 4-Post Canopy or 3 Cylinder, 4 Cycle Heated Cab 15.2 Net HP @ 2300 rpm Suspension Seat Kubota 4 Hydraulic Pump Design 2 Gear, 2 Variable Displacement Pumps Operational DimensionsHydraulic Joystick Controls With Wrist Rests Max Digging Depth 7’ 9.7” Two Operating Pattern Selection System Max Digging Radius @ Ground Level 12’ 8” Standard Front Dozer Blade Max Vertical Digging Depth 6’ 7.9” 360 Degree Full Rotation Max Dumping Height 7’ 9.7” 75 Degree Left, 60 Degree Right Boom Swing 7.4 Gpm Auxiliary Hydraulics Port DOZER BLADE DIMENSIONSFive Second Quick Preheat System Width 3’ 3” / 4’ 3.2” Key Switch Stop System Height 9.1” Short Pitch Rubber Tracks Lift Above Ground 9.1” Self-Bleed Fuel System Drop Below Ground 9.1” Auto-downshift Two Speed Travel System Two Speed Travel PERFORMANCEBasic Units Digging Force @ Bucket (K7970) 3594 lbs. KX018-4R1, Rubber Tracks, 4-Post ROPS/OPG (Top Digging Force @ Dipper Arm 1852 lbs. Guard Level I) Canopy, Dipper Arm, Counterweight Travel Speed (Low) 1.4 mph KX018-4R2, Rubber Tracks, ROPS/OPG (Top Guard Travel Speed (High) 2.6 mph Level I) Heated Cab, Dipper Arm, Counterweight Climbing Ability 27% / 15° Lift Capacity 910 lbs. • Over End Dimensions And Operating Weight • Blade Grounded KX018-4R1, Rubber Tracks, 4-Post ROPS/OPG (Top • 2.0 ft Load Point Height Guard, Level I) Canopy, Dipper Arm, Counterweight • 8.0 ft Load radius Overall Length 12’ 2.1” Overall Width 3’ 3” / 4’ 3.2” Overall Height 7’ 7.7” Operating Weight 3747 lbs.* Ground Clearance 6.3” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-11
KUBOTAK Series KX018-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
KX018-4R1 3747 $30,500.00
K7966 28 $772.00 K7970 80 $768.00
$32,040.00
Counterweight
ATTACHMENTS:
Quick Coupler18” 1.5 cu. ft. Trenching Bucket
Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) Canopy
BASIC UNIT:EXCAVATOR WITH:
STANDARD UNIT KX018-4R1 COMPLETE ORDER AND PRICE
DESCRIPTION
Dozer BladeDipper arm
HOW TO SELECT A KX018-4 EXCAVATOR(Sample Order Information Page)
Below is an example of a complete KX018-4 order. To submit your order, please select the Basic Unit that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX018-4 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-12
KUBOTAK Series KX018-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX018-4R1 3747 $30,500.00
With:
KX018-4R2 3967 $34,000.00
With:
PART 2
K7779A 70 $657.00
K7780A 78 $678.00
K7781 88 $748.00
K7785 95 $930.00
K7966 28 $772.00
K7967 50 $407.00
K7968 92 $618.00
K7969 70 $734.00
K7970 80 $768.00
K9607 12 $213.00
PART 3KXB360Q 247 $6,915.00
K7639 40 $583.00
K7754 54 $627.00
K7764 99 $673.00
K7773 5 $985.00
Description
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, ROPS/OPG (Top Guard, Level I) Heated Cab, Dozer Blade, Dipper Arm, Counterweight
HYDRAULIC BREAKER, 300 ft. lbs. rated
Requires K7639 hose kit and a mount bracket (K7754 or K7764)
HYDRAULIC BREAKER HOSE KIT
12 inch 1.0 cu. ft. Trenching Bucket
18 inch 1.5 cu. ft. Trenching Bucket
Bucket Hangers
77700-00321
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
Set of two ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
ATTACHMENTS
Spade Tool (Transverse To Boom)
Replacement Chisel Point
Includes manual, one moil point and one chisel point.
77700-00339
Quick CouplerIncludes two mounting pins, 1 locking pin, and hardware.
BUCKETS
16 inch 0.95 cu. ft. 2-Hole H. D. Bucket
77700-00407
Excavator Basic Unit
12 inch 0.74 cu. ft. 2-Hole H. D. Bucket
QUICK ATTACH BUCKETS
MODEL KX018-4 BASIC UNITS
Excavator Basic Unit
PIN-ON BUCKETS
9 inch 0.52 cu. ft. 2-Hole H. D. Bucket
18 inch 1.1 cu. ft. 2-Hole H. D. Bucket
Part Nos.
Spade Tool (Parallel To Boom)
Replacement Moil Point
77700-00404
HYDRAULIC BREAKER BRACKET
9 inch 0.78 cu. ft. Trenching Bucket
ACCUMULATOR CHARGE KIT
KXB360Q Hydraulic Hammer Tool Information
16 inch 1.3 cu. ft. Trenching Bucket
Required for KXB360Q Pin-On configuration
HYDRAULIC BREAKER BRACKET
DESCRIPTION
Required for KXB360Q Quick Attach configuration
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-13
KUBOTAK Series KX018-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K7420 2 $250.00
K7421 20 $202.00
K7424 7 $202.00
PART 4K7422 154 $1,300.00
K7423 390 $4,600.00
TBA TBA TBA
Level I) CANOPY
damaged factory mounted cabs. It does not include cabin The K7423 cab is configured as a replacement for
Travel Pedal Kit
electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
REPLACEMENT 4-POST ROPS / OPG (Top Guard,
RETRACTABLE SEAT BELT OPTION (3")
ATTACHMENTS (Cont.)
As required in some states for OSHA compliance.
Canopy Work Light Kit
ROPS / OPG (Top Guard, Level I)
Travel Alarm KitEmits an audible signal when traveling forward or reverse
DESCRIPTION
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
ALLIED ATTACHMENT CONTACTS
DESCRIPTION CONTACT
Earth Auger Model D450, 1475, 1975
McMillen 503 Gay Street Delhi, Iowa 52223 (563) 922-2981 Fax (563) 922-2700
Vibratory Compactor Model 300
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel. (404) 435-6947, Fax: (215) 431-2601 Website: http://www.AlliedCP.com
Available from Parts 70000-01602 Screen Type Spark Arrestor
TBA Block Heater
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-14
KUBOTAK Series U25ST4
U25ST4Zero Tail Swing Hydraulic Excavator
FEATURES ENGINEZero Tail Swing D1105 Kubota E-TVCS T4 Diesel Engine Rubber Track Models 3 Cylinder, 4 Cycle ROPS/OPG (Top Guard, Level I) 4-Post Canopy 19.8 Net HP @ 2400 rpm Suspension Seat Kubota 3 Hydraulic Pump Design OPERATIONAL DIMENSIONS 1 Gear, 2 Variable Displacement Pumps Max Digging Depth 9’ 3” Hydraulic Joystick Controls With Wrist Rests Max Digging Radius @ Ground Level 15’ 4” Two Operating Pattern Selection System Max Vertical Digging Depth 6’ 5” Standard Front Dozer Blade Max Dumping Height 10’ 6” 360 Degree Full Rotation 75 Degree Left, 55 Degree Right Boom Swing DOZER BLADE DIMENSIONS 12.7 Gpm Auxiliary Hydraulics Port Width 59” Five Second Quick Preheat System Height 11.8” Key Switch Stop System Lift Above Ground 14” Half Pitch Rubber Tracks Drop Below Ground 13” Self Bleed Fuel System Two Speed Travel PERFORMANCE Digging Force @ Bucket (K7978) 5765 lbs. BASIC UNITS Digging Force @ Dipper Arm 2745 lbs. U25R1T4, Rubber Tracks, 4-Post ROPS/OPG (Top Travel Speed (Low) 1.6 mph Guard, Level I) Travel Speed (High) 2.9 mph Climbing Ability 36%/ 20° DIMENSIONS AND OPERATING WEIGHT Lift Capacity 2,050 lbs. U25R1T4, Rubber Tracks, 4-Post ROPS/OPG (Top Over Front Guard, Level I) Blade Grounded Overall Length 13’ 7” 2.0 ft. Load Point Height Overall Width 4’ 11” 8.0 ft. Load radius Overall Height 7’ 11” Operating Weight* 5,625 lbs. Ground Clearance 11.2” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-15
KUBOTAK Series U25ST4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
U25R1T4 5357 $34,590.00
With:
K7974 39 $833.00
K7978 155 $1,040.00
$36,463.00
Dipper armCounterweight
STANDARD UNIT U25R1T4 COMPLETE ORDER AND PRICE
Quick Coupler
18” 2.2 cu. ft. Trenching Bucket
Excavator Basic Unit
ATTACHMENTS:
DESCRIPTION
Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) CanopyDozer Blade
BASIC UNIT:
HOW TO SELECT A U25ST4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete U25ST4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a U25R1T4 and get: Base Model, rubber tracks, 4-post ROPS/ OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-16
KUBOTAK Series U25ST4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
U25R1T4 5357 $34,590.00 With:
PART 2
K7788 130 $930.00
K7789 150 $988.00
K7790 164 $1,005.00
K7791 193 $1,073.00
K7974 39 $833.00
K9781 24 $251.00
K7975 110 $709.00
K7976 135 $820.00
K7977 150 $932.00
K7978 155 $1,040.00
K7979 180 $1,151.00
PART 3K7912 122 $2,200.00
KXB460Q 350 $8,450.00
Requires K7774 hose kit and a mount bracket (K7755 or K7765)
12 inch 1.44 cu. ft. 3-Hole H.D. BUCKET
Set of 2 bucket ear blanks. Converts buckets to
QUICK COUPLER
24 inch 3.40 cu. ft. 3-Hole H.D. BUCKET
Curl hole and power hole built into quick coupler.
Includes manual, one moil point, and one chisel point.
ATTACHMENTS
The K7978 bucket has four teeth. The K7912 Thumb tines contact the end of the teeth and do not mesh between the teeth.
16 inch 1.9 cu. ft. Trenching Bucket
24 inch 3.0 cu. ft. Trenching Bucket
HYDRAULIC THUMB KIT
QUICK ATTACH BUCKETS
BUCKET HANGERS
BUCKETS
PIN-ON BUCKETS (Order Attaching Pins from Parts)
18 inch 2.40 cu. ft. 3-Hole H.D. BUCKET
Includes two mounting pins, 1 locking pin, and hardware.
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,Dozer Blade, Dipper Arm, Counterweight
18 inch 2.2 cu. ft. Trenching Bucket
K7974 Quick Coupler required.
12 inch 1.4 cu. ft. Trenching Bucket
16 inch 2.12 cu. ft. 3-Hole H.D. BUCKET
Excavator Basic Unit
DESCRIPTION
MODEL U25ST4 BASIC UNITS
quick coupler style. Modification to match bucket contour required.
9 inch 1.0 cu. ft. Trenching Bucket
HYDRAULIC BREAKER, 400 ft. lbs. rated
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-17
KUBOTAK Series U25ST4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K7774 16 $645.00
K7755 54 $696.00
K7765 35 $677.00
K7773 5 $985.00
Description
Spade Tool (Transverse To Boom)
K9919 20 $124.00
K9962 370 $3,330.00
K9967 7 $293.00
PART 4 ROPS / OPG (Top Guard, Level I)K7847 154 $1,352.00
K9943A 3 $78.00
Part Nos.KXB460Q Hydraulic Hammer Tool Information
77700-00405
Required for KXB460Q Pin-On configuration
HYDRAULIC BREAKER HOSE KITRequired for all KXB460Q installations
HYDRAULIC BREAKER MOUNT BRACKETRequired for KXB460Q Quick Attach configuration
HYDRAULIC BREAKER MOUNT BRACKET
77700-00408
As required in some states for OSHA compliance.
Replacement Moil Point
Spade Tool (Parallel To Boom)
CANOPY WORK LIGHT KIT
STEEL CRAWLER KIT
ACCUMULATOR CHARGE KIT
77700-0034077700-00322
TRAVEL ALARM KIT
DESCRIPTION
Convert tracks from rubber to steel
Emits an audible signal when traveling forward or reverse
CANOPY
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
ATTACHMENTS (Cont.)
Replacement Chisel Point
RETRACTABLE SEAT BELT OPTION (3”)
REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I)
ALLIED ATTACHMENT CONTACTS DESCRIPTION CONTACT
Earth Auger Model D450, 1475, 1975
McMillen 503 Gay Street Delhi, Iowa 52223 (563) 922-2981 Fax (563) 922-2700
Vibratory Compactor Model 300
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel. (404) 435-6947, Fax: (216) 431-2601 Website: http://www.AlliedCP.com
Available from Parts 70000-73274 Block Heater Kit
70000-01602 Spark Arrestor (Screen Type)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-18
KUBOTAK Series KX71-3S4
KX71-3S4Hydraulic Excavator
FEATURES ENGINERubber or Steel Track Models V1505 Kubota E-TVCS Tier 4 Diesel Engine ROPS/OPG (Top Guard, Level I) 4-Post Canopy or 4 Cylinder, 4 Cycle Heated Cab 23.1 Net HP @ 2250 rpmSuspension Seat Kubota 3 Hydraulic Pump Design OPERATIONAL DIMENSIONS 1 Gear, 2 Variable Displacement Pumps Max Digging Depth 9’ 9” Hydraulic Joystick Controls Max Digging Radius @ Ground Level 16’ Two Operating Pattern Selection System Max Vertical Digging Depth 6’ 5” Standard Front Dozer Blade Max Dumping Height 10’ 5” 360 Degree Full Rotation 80 Degree Left, 60 Degree Right Boom Swing DOZER BLADE DIMENSIONS 13.1 gpm Adjustable Auxiliary Hydraulics Port Width 59” Five Second Quick Preheat System Height 12” Key Switch Stop System Lift Above Ground 13” Half Pitch Rubber Tracks Drop Below Ground 12” Self Bleed Fuel System Two Speed Travel PERFORMANCE Thumb Bracket & Relief Valves Digging Force @ Bucket (K7875) 6350 lbs. Swivel Negative Brake Digging Force @ Dipper Arm 3285 lbs. Travel Speed (Low) 1.8 mph BASIC UNITS Travel Speed (High) 2.9 mph KX71-3S4R1, Rubber Tracks, 4-Post ROPS/OPG Climbing Ability 36%/ 20° (Top Guard, Level I) Canopy Lift Capacity 1,760 lbs.KX71-3S4R2, Rubber Tracks, ROPS/OPG (Top Over Front Guard, Level I) Cab Blade Grounded KX71-3S4S1, Steel Tracks, 4-Post ROPS/OPG (Top 2.0 ft. Load Point Height Guard, Level I) Canopy 8.0 ft. Load radius KX71-3S4S2, Steel Tracks, ROPS/OPG (Top Guard, Level I) Cab DIMENSIONS AND OPERATING WEIGHT KX71-3S4R1, Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy Overall Length 14’ 11” Overall Width 4’ 11” Overall Height 8’ Operating Weight* 6305 lbs. Ground Clearance 11” KX71-3S4R2, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Heated Cab
Overall Length 14’ 11” Overall Width 4’ 11” Overall Height 7’ 11” Operating Weight* 6550 lbs.Ground Clearance 11” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-19
KUBOTAK Series KX71-3S4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
KX71-3S4R1 Excavator Basic Unit 6305 $38,300.00 With: Rubber Tracks
Dozer BladeDipper armCounterweight
K7870 Quick Coupler 72 $904.00 K7875 240 $1,269.00
$40,473.00
KX71-3S4R2 Excavator Basic Unit 6550 $42,560.00 With: Rubber Tracks
ROPS/OPG (Top Guard, Level I) CabDozer BladeDipper armCounterweight
K7862A 225 $1,205.00 $43,765.00
ATTACHMENTS:
4-Post ROPS/OPG (Top Guard, Level I) Canopy
ATTACHMENTS:
DESCRIPTION
24” 4.25 cu. ft. Trenching Bucket
STANDARD UNIT KX71-3S4R1 COMPLETE ORDER AND PRICEBASIC UNIT:
BASIC UNIT:STANDARD UNIT KX71-3S4R2 COMPLETE ORDER AND PRICE
24” 3.73 cu. ft. 3-Hole H. D. Bucket
HOW TO SELECT A KX71-3S4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX71-3S4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX71-3S4 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-20
KUBOTAK Series KX71-3S4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX71-3S4R1 6305 $38,300.00
With:
KX71-3S4R2 6550 $42,560.00
With:
KX71-3S4S1 6525 $38,300.00
With:
KX71-3S4S2 6770 $42,560.00
With:
PART 2 BUCKETS
K7792A 200 $1,000.00
K7793 214 $1,075.00
K7794 223 $1,123.00
K7796 260 $1,238.00
K7870 72 $904.00
K9807 88 $326.00
K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
K7473 305 $4,336.00
K7474 41 $150.00
K7458 245 $1,360.00
Set of 2 bucket ear blanks. Converts buckets to
Includes hoses and fittings. Tilts 45° each direction.
12 inch 2.60 cu. ft. 3-Hole Bucket
16 inch 2.80 cu. ft. 3-Hole Bucket
18 inch 3.20 cu. ft. 3-Hole Bucket
Thumb tines contact the end of the teeth and
24 inch 4.50 cu. ft. 3-Hole Bucket
Excavator Basic Unit
Excavator Basic Unit
Excavator Basic Unit
12 inch 2.13 cu. ft. Trenching Bucket
16 inch 2.83 cu. ft. Trenching Bucket
The K7874 bucket has four teeth. The K7902
BOLT ON CUTTING EDGE
quick coupler style. Modification to match
18 inch 3.19 cu. ft. Trenching Bucket
36 inch Grading Blade
Curl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.
BUCKET HANGERS
do not mesh between the teeth.
24 inch 4.25 cu. ft. Trenching Bucket
36 inch 3.0 cu. ft. TILT GRADING BUCKET
bucket contour required.
For K7473 36” grading bucket
Excavator Basic Unit
PIN-ON BUCKETS (Order attaching pins from Parts)
DESCRIPTION
MODEL KX71-3S4 BASIC UNITS
QUICK ATTACH BUCKETS
QUICK COUPLER
Steel Tracks, ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-21
KUBOTAK Series KX71-3S4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3K7902 190 $2,558.00
KXB460Q 350 $8,450.00
K7774 16 $645.00
K7758 54 $754.00
K7766 35 $793.00
K7773 5 $985.00
Description
K7461 300 $1,878.00
K9919 20 $124.00
K9736 370 $2,847.00
K9967 7 $293.00
K9989 20 $370.00
K9988 2 $66.00
KXB460Q Hydraulic Hammer Tool Information
Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a mount bracket (K7758 or K7766)
Required for KXB460Q Quick Attach configuration
Part Nos.
Required for K9989 installation.
SPARK ARRESTOR MUFFLER KITOptional kit for use in close proximity with grass, brush, timber and similar material with potential for ignition. Requires K9988 Heat Insulation Kit.
HEAT INSULATION KIT
TRAVEL ALARM KITEmits an audible signal when traveling forward or reverse
77700-00408
CANOPY WORK LIGHT KIT
24” EXCAVATING RAKE, QUICK ATTACH
Spade Tool (Parallel To Boom)Spade Tool (Transverse To Boom)
77700-0034077700-00322
Required for all KXB460Q installationsHYDRAULIC BREAKER HOSE KIT
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
Replacement Moil PointReplacement Chisel Point
HYDRAULIC BREAKER, 400 ft. lbs. rated
BREAKER MOUNT BRACKET
77700-00405
STEEL CRAWLER KITConvert tracks from rubber to steel
K7870 Quick Coupler required.
ATTACHMENTS
DESCRIPTION
BREAKER MOUNT BRACKET
HYDRAULIC THUMB KIT
ACCUMULATOR CHARGE KIT
Required for KXB460Q Pin-On configuration
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-22
KUBOTAK Series KX71-3S4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4K7890 180 $1,195.00
K7899 400 $5,807.00
K9943A 3 $78.00
K7856C 8 $470.00
CANOPY
RADIO OPTIONCompatible with cab models only. Kit includes AM/FM/WB radio, MP3 port, mounting kit, speakers, and antenna
RETRACTABLE SEAT BELT OPTION (3”)As required in some states for OSHA compliance.
damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
DESCRIPTION
ROPS / OPG (Top Guard, Level I)
The K7899 cab is configured as a replacement for REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
REPLACEMENT 4-POST ROPS/OPG (Top Guard, Level I)
ALLIED ATTACHMENT CONTACTS DESCRIPTION CONTACT:
Earth Auger Model 975, 1475, 1975
McMillen 503 Gay Street Delhi, IA 52223 (800) 922-2981 Fax (563) 922-2082
Vibratory Compactor Model 500B
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel. (404) 435-6947, Fax (216) 431-2601 Website: http://www.AlliedCP.com
Available from Parts
70000-73274 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-23
KUBOTA
This page intentionally left blank.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-24
KUBOTAK Series KX91-3S2
KX91-3S2Hydraulic Excavator
FEATURES DIMENSIONS AND OPERATING WEIGHT
Rubber Or Steel Track Models KX91R1S2, Rubber Tracks, 4-Post ROPS/ OPG (Top ROPS/OPG (Top Guard, Level I) 4-Post Canopy Guard, Level I) Canopy or Cab Overall Length 15’ 7” Suspension Seat Overall Width 5’ 1” Kubota 3 Hydraulic Pump Design Overall Height 8’ 1 Gear, 2 Variable Displacement Pumps Operating Weight* 7110 lbs. Hydraulic Joystick Controls Ground Clearance 11.6” Accumulator Two Operating Pattern Selection System KX91R2S2, Rubber Tracks, ROPS/ OPG (Top Guard, Standard Front Dozer Blade Level I) Heated Cab Float Angle Blade Option Overall Length 15’ 7” 360 Degree Full Rotation Overall Width 5’ 1” 80 Degree Left, 50 Degree Right Boom Swing Overall Height 8’ 10.9 gpm Adjustable Auxiliary Hydraulics Port Operating Weight* 7330 lbs. Five Second Quick Preheat System Ground Clearance 11.6” Key Switch Stop System Half Pitch Rubber Tracks ENGINE Self-Bleed Fuel System D1703-M Kubota E-TVCS Interim Tier 4 Diesel Engine Two Speed Travel 2013 Production Using TPEM Auto Idler 3 Cylinder, 4 Cycle Travel Negative Brake 28.3 Net HP @ 2250 rpm Thumb Bracket & Relief Valves Third Line OPERATIONAL DIMENSIONS Swivel Negative Brake Max Digging Depth 10’ 5” Max Digging Radius @ Ground Level 16’ 10” BASIC UNITS Max Vertical Digging Depth 7’ 10” KX91R1S2, Rubber Tracks, 4-Post ROPS/OPG (Top Max Dumping Height 11’ 7” Guard, Level I) Canopy KX91R1AS2, Rubber Tracks, 4-Post ROPS/OPG DOZER BLADE DIMENSIONS (Top Guard, Level I) Canopy, Angle Dozer Blade Width 61.0” KX91R1AES2, Rubber Tracks, 4-Post ROPS/OPG Height 13.2” (Top Guard, Level I) Canopy, Extendible Dipper Lift Above Ground 14.6” Arm, Angle Dozer Blade Drop Below Ground 14.6” KX91R2S2, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab PERFORMANCE KX91R3S2, Rubber Tracks, Air Conditioned Digging Force @ Bucket (K7875) 8059 lbs. ROPS/OPG (Top Guard, Level I) Cab Digging Force @ Dipper Arm 3592 lbs. KX91R2AS2, Rubber Tracks, ROPS/OPG (Top Travel Speed (Low) 1.9 mph Guard, Level I) Cab, Angle Dozer Blade Travel Speed (High) 2.9 mph KX91R3AS2, Rubber Tracks, Air Conditioned ROPS/ Climbing Ability 36% / 20° OPG (Top Guard, Level I) Cab, Angle Dozer Blade Lift Capacity 2,950 lbs. KX91S1S2, Steel Tracks, 4-Post ROPS/OPG (Top • Over Front Guard, Level I) Canopy • Blade Grounded KX91S3S2, Steel Tracks, Air Conditioned ROPS/ • 2.0 ft. Load Point Height OPG (Top Guard, Level I) Cab • 8.0 ft. Load radius
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-25
KUBOTAK Series KX91-3S2
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
KX91R1AS2 Excavator Basic Unit 7,140 $46,410.00 With: Rubber Tracks
Angle Dozer BladeDipper ArmCounterweight
K7862A 225 $1,205.00 $47,615.00
KX91R2S2 Excavator Basic Unit 6,930 $47,770.00 With: Rubber Tracks
Dozer BladeDipper ArmCounterweight
K7870 Quick Coupler 72 $904.00 K7875 240 $1,269.00
$49,943.00
4-Post ROPS/OPG (Top Guard, Level I) Canopy
ROPS/OPG (Top Guard, Level I) Cab
24” 3.73 cu. ft. 3-Hole H. D. BucketATTACHMENTS:
24” 4.25 cu. ft. Trenching Bucket
ATTACHMENTS:
STANDARD UNIT KX91R2S2 COMPLETE ORDER AND PRICEBASIC UNIT:
STANDARD UNIT KX91R1AS2 COMPLETE ORDER AND PRICEBASIC UNIT:
DESCRIPTION
HOW TO SELECT A KX91-3S2 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX91-3S2 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX91R1AS2 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, angle dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-26
KUBOTAK Series KX91-3S2ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX91R1S2 6,710 $43,660.00
With:
KX91R1AS2 7,140 $46,410.00
With:
KX91R1AES2 7,635 $49,600.00
With:
The widest trenching bucket approved for use with the KX91R1AES2 is 16” (K7793 or K7873). Thumbs and hydraulic breakers are not
KX91R2S2 6,930 $47,770.00
With:
KX91R3S2 6,930 $50,860.00
With:
KX91R2AS2 7,360 $50,520.00
With:
KX91R3AS2 7,360 $53,610.00
With:
KX91S1S2 6,897 $43,660.00
With:
KX91S3S2 7,150 $50,860.00
With:
PART 2
K7792A 200 $1,000.00
K7793 214 $1,075.00
K7794 223 $1,123.00
K7796 260 $1,238.00
K7870 72 $904.00
K9807 88 $326.00
Excavator Basic Unit
Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,
Excavator Basic Unit
Steel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I)
BUCKETS
PIN-ON BUCKETS (Order Attaching Pins from Parts)
Dozer Blade, Dipper Arm, Counterweight
coupler style. Modification to match bucket contour required.
Cab, Dozer Blade, Dipper Arm, Counterweight
12 inch 2.60 cu. ft. 3-Hole Bucket
Includes two mounting pins, 1 locking pin and hardware.
16 inch 2.80 cu. ft. 3-Hole Bucket
18 inch 3.20 cu. ft. 3-Hole Bucket
BUCKET HANGERSSet of 2 bucket ear blanks. Converts buckets to quick
24 inch 4.50 cu. ft. 3-Hole Bucket
QUICK ATTACH BUCKETS
QUICK COUPLERCurl hole and power hole built into quick coupler.
Excavator Basic Unit
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
Excavator Basic Unit
I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight
Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Angle Dozer Blade, Dipper Arm, Counterweight
Excavator Basic Unit
Angle Dozer Blade, Dipper Arm, Counterweight
Excavator Basic Unit
Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab,
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Dozer Blade, Extendible Dipper Arm, Counterweight
approved for use with the extendible arm.
Excavator Basic Unit
Dozer Blade, Dipper Arm, Counterweight
Excavator Basic Unit
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,
Dozer Blade, Dipper Arm, CounterweightRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,
DESCRIPTION
MODEL KX91-3S2 BASIC UNITS
Excavator Basic Unit
Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab,
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-27
KUBOTAK Series KX91-3S2ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2 BUCKETS (Cont.)K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
K7473 305 $4,336.00
K7474 41 $150.00
K7458 245 $1,360.00
PART 3 ATTACHMENTSK7902 190 $2,558.00
KXB460Q 350 $8,450.00
K7774 16 $645.00
K7758 54 $754.00
K7773 5 $985.00
K7461 300 $1,878.00
K9919 20 $124.00
K9928 370 $2,645.00
K9774 7 $280.00
K9939 50 $505.00
K9959A 2.2 $31.00
Emits an audible signal when traveling forward or reverse
Optional kit for use in close proximity with grass, brush, timber and similar cellulose material with potential for ignition. Requires K9959A Heat Insulation Kit.
ACCUMULATOR CHARGE KIT
SPARK ARRESTOR MUFFLER KIT
Required for K9939 installation.
Not approved for use with extendible arm.
12 inch 2.13 cu. ft. Trenching Bucket
16 inch 2.83 cu. ft. Trenching Bucket
18 inch 3.19 cu. ft. Trenching Bucket
Convert tracks from rubber to steel
Required for KXB460Q installations
BREAKER MOUNT BRACKET
Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7758 mount bracket
HYDRAULIC BREAKER HOSE KIT
36" Grading Blade
HYDRAULIC THUMB KITK7870 Quick Coupler required
HYDRAULIC BREAKER, 400 ft. lbs. rated
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
DESCRIPTION
Includes hoses and fittings. Tilts 45° each direction
The K7874 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
For K7473 36” grading bucket
24 inch 4.25 cu. ft. Trenching Bucket
36 inch 3.0 cu. ft. TILT GRADING BUCKET
BOLT ON CUTTING EDGE
24 INCH EXCAVATING RAKE, QUICK ATTACH
HEAT INSULATION KIT
TRAVEL ALARM KIT
Required for KXB460Q Quick Attach configuration
CANOPY WORK LIGHT KIT
STEEL CRAWLER KIT
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-28
KUBOTAK Series KX91-3S2ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4
K7892 165 $1,077.00
K7893 463 $5,807.00
K9946 4 $124.00
K7856C 8 $470.00
radio, MP3 port, mounting kit, speakers, and antenna
DESCRIPTION CONTACT:McMillen
Available from Parts
Compatible with cab models only. Kit includes AM/FM/WB
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
Delhi, IA 52223
Website: http://www.AlliedCP.com
503 Gay Street
(800) 922-2981 Fax (563) 922-2082
Tel. (404) 435-6947, Fax (216) 431-2601
3900 Kelly AvenueCleveland, OH 44114
Allied Construction Products, LLC
Model 975, 1475, 1975Earth Auger
DESCRIPTION
RADIO OPTION
REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I) CANOPY
ALLIED ATTACHMENT CONTACTS
The K7893 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
As required in some states for OSHA compliance.
ROPS / OPG (Top Guard, Level I)
RETRACTABLE SEAT BELT OPTION (3”)
Model 500BVibratory Compactor
70000-00297 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-29
KUBOTA
This page intentionally left blank.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-30
KUBOTAK Series U35-4
U35-4Tight Tail Swing Hydraulic Excavator
FEATURES ENGINETight Tail Swing D1703-M Kubota E-TVCS Tier 4 Diesel Engine Auto Idler 3 Cylinder, 4 Cycle Rubber Or Steel Track Models 23.9 Net HP @ 2200 rpm ROPS/OPG (Top Guard, Level I) 4-Post Canopy or Air Conditioned Cab OPERATIONAL DIMENSIONSSuspension Seat Max Digging Depth 9’ 8.9” Kubota 3 Hydraulic Pump Design Max Digging Radius @ Ground Level 16’ 11.3” 1 Gear, 2 Variable Displacement Pumps Max Vertical Digging Depth 6’ 7.3” All Controls Hydraulic Pilot Controls Max Dumping Height 11’ 0.7” Accumulator Two Operating Pattern Selection System STANDARD DOZER BLADE DIMENSIONS Digital Control Pane Width 67” Attachment Flow Presets, Service Alerts Height 13.5” Standard Front Dozer Blade with Float Lift Above Ground 14.65” Optional Float Angle Blade w/ Bolt-on Cutting Edge Drop Below Ground 14.53” 360 Degree Full Rotation 71 Degree Left, 45 Degree Right Boom Swing PERFORMANCE 15.8 gpm Adjustable Auxiliary Hydraulics Port Digging Force @ Bucket (K7875) 7924 lbs. Auxiliary Hydraulics Diverter Valve Digging Force @ Dipper Arm 4451 lbs. Thumb Bracket & Relief Valves Travel Speed (Low) 1.9 mph Five Second Quick Preheat System Travel Speed (High) 2.9 mph Key Switch Stop System Climbing Ability 58% / 30° Half Pitch Rubber Tracks Lift Capacity 3,230 lbs. Self-Bleed Fuel System • Over Front Auto-Downshift Two Speed Travel System • Blade Grounded Swivel Negative Brake • 2.0 ft. Load Point Height Travel Negative Brake • 8.0 ft. Load radius Third Line BASIC UNITS U35-4R1 Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) U35-4R1A Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I), Angle Dozer Blade U35-4R3 Rubber Tracks, Air Conditioned, ROPS/ OPG (Top Guard, Level I) Cab U35-4R3A Rubber Tracks, Air Conditioned ROPS/ OPG (Top Guard, Level I) Cab, Angle Dozer Blade DIMENSIONS AND OPERATING WEIGHT U35R1, Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Overall Length 15’ 7” Overall Width 5’ 7” Overall Height 8’ 1.2” Operating Weight* 8129 lbs. Ground Clearance 11.34” U35R2S2, Rubber Tracks, Air Conditioned, ROPS/OPG (Top Guard, Level I) Cab Overall Length 15’ 7” Overall Width 5’ 7” Overall Height 8’ 1.2” Operating Weight* 8451lbs. Ground Clearance 11.34” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-31
KUBOTAK Series U35-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
U35-4R1A Excavator Basic Unit 8,478 $48,700.00 With: Rubber Tracks
Angle Dozer BladeDipper armCounterweight
K7862A 225 $1,205.00 $49,905.00
U35-4R3 Excavator Basic Unit 8,451 $52,900.00 With: Rubber Tracks
Dozer BladeDipper armCounterweight
K7870 Quick Coupler 72 $904.00 K7875 240 $1,269.00
$55,073.00
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab
4-Post ROPS/OPG (Top Guard, Level I) Canopy
BASIC UNIT:
ATTACHMENTS:24” 3.73 cu. ft. 3-Hole H. D. Bucket
ATTACHMENTS:
24” 4.25 cu. ft. Trenching Bucket
DESCRIPTION
STANDARD UNIT U35-4R3 COMPLETE ORDER AND PRICE
BASIC UNIT:STANDARD UNIT U35-4R1A COMPLETE ORDER AND PRICE
HOW TO SELECT A U35-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete U35-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a U35-4R1A and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, angle dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-32
KUBOTAK Series U35-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1U35-4R1 8,129 $45,900.00 With:
U35-4R1A 8,478 $48,700.00 With:
U35-4R3 8,451 $52,900.00 With:
U35-4R3A 8,800 $55,700.00 With:
PART 2 BUCKETS
K7792A 200 $1,000.00 K7793 214 $1,075.00 K7794 223 $1,123.00 K7796 260 $1,238.00
K7870 QUICK COUPLER 72 $904.00
K9807 88 $326.00
K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
K7473 305 $4,336.00
K7474 41 $150.00
K7458 245 $1,360.00
BUCKET HANGERS
16 inch 2.80 cu. ft. 3-Hole Bucket18 inch 3.20 cu. ft. 3-Hole Bucket24 inch 4.50 cu. ft. 3-Hole Bucket
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)Canopy, Angle Dozer Blade, Dipper Arm, Counterweight
Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Excavator Basic UnitRubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
36 inch Grading Blade
For K7473 36” grading bucket
12 inch 2.13 cu. ft. Trenching Bucket
Excavator Basic Unit
12 inch 2.60 cu. ft. 3-Hole Bucket
Excavator Basic Unit
DESCRIPTION
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight
PIN-ON BUCKETS (Order attaching pins from Parts)
Canopy, Dozer Blade, Dipper Arm, Counterweight,
Includes hoses and fittings. Tilts 45° each direction.
QUICK ATTACH BUCKETS
36 inch 3.0 cu. ft. TILT GRADING BUCKET
BOLT ON CUTTING EDGE
Curl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.
16 inch 2.83 cu. ft. Trenching Bucket
18 inch 3.19 cu. ft. Trenching Bucket
Set of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
The K7874 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
24 inch 4.25 cu. ft. Trenching Bucket
MODEL U35-4 BASIC UNITSExcavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-33
KUBOTAK Series U35-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3 ATTACHMENTS
K7910 190 $2,558.00
KXB460Q 350 $8,450.00
K7774 16 $645.00
K7758 54 $754.00
K7773 5 $985.00
`
K7461 300 $1,878.00
K7940 6 $135.00
K9784 TRAVEL ALARM KIT 7 $280.00
TBA TBA TBA
TBA HEAT INSULATION KIT TBA TBA
PART 4
K9786 165 $1,550.00
K9787 390 $6,600.00
K7479 4 $280.00
K9946 3 $124.00
K7942A RADIO OPTION 8 $248.00
DESCRIPTION CONTACT:McMillen
Earth Auger 503 Gay StreetModel 975, 1475, 1975 Delhi, IA 52223
Vibratory Compactor 3900 Kelly AvenueModel 500B
Available from Parts
HYDRAULIC THUMB KITK7870 Quick Coupler required
Emits an audible signal when traveling forward or reverse.
HYDRAULIC BREAKER HOSE KITRequired for KXB460Q installations
(800) 922-2981 Fax (319) 922-2700Allied Construction Products, LLC
Cleveland, OH 44114
ROPS / OPG (Top Guard, Level I)
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
Website: http://www.AlliedCP.comTel: (404) 435-6947, Fax: (216) 431-2601
70000-00297 Block Heater Kit
24 INCH EXCAVATING RAKE, QUICK ATTACH
REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I) CANOPY
The K9787 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
ACCUMULATOR CHARGE KIT
CANOPY WORK LIGHT KIT
SPARK ARRESTOR MUFFLER KITOptional kit for use in close proximity with grass, brush, timber and similar cellulose materials with potential for ignition. TBA heat insulation kit required.
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
RETRACTABLE SEAT BELT OPTION (3”)
Required for TBA installation.
Cab Mirror KitIncludes two side mirrors, one for each side, one rear mirror, and attaching hardware
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
BREAKER MOUNT BRACKETRequired for KXB460Q Quick Attach configuration
As required in some states for OSHA compliance
HYDRAULIC BREAKER, 400 ft. lbs. ratedIncludes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7758 mount bracket
DESCRIPTION
ALLIED ATTACHMENT CONTACTS
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-34
KUBOTAK Series KX121-3ST3
KX121-3ST3Hydraulic Excavator
FEATURES DIMENSIONS AND OPERATING WEIGHT Auto Idler KX121R1TA, Rubber Tracks, 4-Post ROPS/ OPG (Top Rubber Or Steel Track Models Guard, Level 1) Canopy, 6-in-1 Dozer Blade, ROPS/OPG (Top Guard, Level 1) 4-Post Canopy or Air Dipper Arm, Counterweight Conditioned Cab Overall Length 16’ 9” Suspension Seat Overall Width 5’ 7” Kubota 2 Hydraulic Pump Design Overall Height 8’ 3” 1 Gear, 1 Variable Displacement Pumps Operating Weight* 9,615 lbs. Hydraulic Joystick Controls Ground Clearance 13.0” Two Operating Pattern Selection System Standard Front Dozer Blade KX121R3TA, Rubber Tracks, Air Conditioned ROPS/ 360 Degree Full Rotation OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Blade,80 Degree Left, 50 Degree Right Boom Swing Dipper Arm, Counterweight 15.9 gpm Adjustable Auxiliary Hydraulics Port Overall Length 16’ 9” Five Second Quick Preheat System Overall Width 5’ 7” Key Switch Stop System Overall Height 8’ 2 Half Pitch Rubber Tracks Operating Weight* 9,815 lbs. Self-Bleed Fuel System Ground Clearance 13.0” Two Speed Travel Swivel Negative Brake * Includes operator’s weight, 175 lbs. Thumb Bracket and Relief Valves Third Line ENGINE V2203 E-TVCS Interim Tier 4 Diesel Engine BASIC UNITS 2013 Production Using TPEM KX121R1TA, Rubber Tracks, 4-Post ROPS/ OPG (Top 4 Cylinder, 4 Cycle Guard, Level 1) Canopy, 6-in-1 Dozer Blade, Dipper 39.0 Net HP @ 2250 rpm Arm, Counterweight KX121R3TA, Rubber Tracks, Air Conditioned OPERATIONAL DIMENSIONS ROPS/ OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Max Digging Depth 11’ 6” Blade, Dipper Arm, Counterweight Max Digging Radius @ Ground Level 18’ 0” KX121S1TA, Steel Tracks, 4-Post ROPS/ OPG (Top Max Vertical Digging Depth 8’ 2” Guard, Level 1) 6-in-1 Dozer Blade, Dipper Arm, Max Dumping Height 12’ 9” Counterweight KX121S3TA, Steel Tracks, Air Conditioned DOZER BLADE DIMENSIONS ROPS/OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Width 67” Blade, Dipper Arm, Counterweight Height 13.8” Lift Above Ground 15.7” Drop Below Ground 15.9” PERFORMANCE Digging Force @ Bucket (K7875) 8,754 lbs. Digging Force @ Dipper Arm 3,947 lbs. Travel Speed (Low) 1.7 mph Travel Speed (High) 3.1 mph Climbing Ability 36% / 20° Lift Capacity 3,960 lbs. • Over Front • Blade Grounded • 2.0 ft. Load Point Height
• 8.0 ft. Load radius
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-35
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
KX121R1TA 9,615 $55,200.00 With:
K7864A 225 $1,235.00 $56,435.00
KX121R3TA 9,815 $61,220.00 With:
K7870 72 $904.00 K7875 240 $1,269.00 K7902 Hydraulic Thumb Kit 190 $2,558.00
$65,951.00
STANDARD UNIT KX121R1TA COMPLETE ORDER AND PRICEBASIC UNIT:
DESCRIPTION
Excavator Basic Unit
6-in-1 Dozer Blade
24” 4.30 cu. ft. 3-Hole H. D. BucketATTACHMENTS:
Dipper arm
Counterweight
Rubber Tracks
STANDARD UNIT KX121R3TA COMPLETE ORDER AND PRICEBASIC UNIT:
Excavator Basic Unit
6-in-1 Dozer Blade
Counterweight
Dipper arm
ATTACHMENTS:Quick Coupler24” 4.25 cu. ft. Trenching Bucket
Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) Canopy
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab
HOW TO SELECT A KX121-3ST3 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX121-3ST3 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX121R1TA and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level 1) canopy, 6-in-1 dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-36
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX121R1TA 9,615 $55,200.00 With:
KX121R3TA 9,815 $61,220.00 With:
KX121S1TA 9,755 $55,200.00 With:
KX121S3TA Excavator Basic Unit 9,955 $61,220.00 With:
PART 2
K7792A 200 $1,000.00
K7793 214 $1,075.00
K7794 223 $1,123.00
K7796 260 $1,238.00
K7797 283 $1,357.00
K9836A 194 $988.00
K7870 72 $904.00
K9807 88 $326.00
K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm,
Counterweight
BUCKET OPTIONS
PIN-ON BUCKETS (Order attaching pins from Parts)
MECHANICAL QUICK ATTACH OPTIONSQUICK COUPLERCurl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.
BUCKET HANGERSSet of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
18 inch 3.19 cu. ft. Trenching BucketThe K7874 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
24 inch 4.25 cu. ft. Trenching Bucket
12 inch 2.13 cu. ft. Trenching Bucket
16 inch 2.83 cu. ft. Trenching Bucket
QUICK ATTACH BUCKETS
Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight
Excavator Basic Unit
Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight
30 inch 5.80 cu. ft. 3-Hole Bucket
36 inch 4.17 cu. ft. Drainage Bucket
18 inch 3.20 cu. ft. 3-Hole Bucket
24 inch 4.50 cu. ft. 3-Hole Bucket
Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm,
Counterweight
Excavator Basic Unit
DESCRIPTION
MODEL KX121-3ST3 BASIC UNITS
6-in-1 Dozer Blade ModelsExcavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
Steel Tracks, Air Conditioned ROPS/OPG (Top Guard,
12 inch 2.6 cu. ft. 3-Hole Bucket
16 inch 2.80 cu. ft. 3-Hole Bucket
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-37
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
K7461 300 $1,878.00
K7876 265 $1,467.00
K7877A 230 $1,129.00
K7458 270 $1,360.00
K7473 305 $4,336.00
K7454 485 $4,920.00
K7100 72 $1,900.00
K7101 180 $1,150.00
K7106 180 $1,040.00
K7107 180 $250.00
K7110 180 $1,015.00
K7111 180 $1,030.00
K7116 160 $985.00
K7117 185 $1,020.00
K7118 190 $1,085.00
K7119 240 $1,270.00
K7125 300 $1,895.00
Mechanical operation only. Requires K7107 completion kit.
Contains components required to complete the K7106 kit.
DESCRIPTION
MECHANICAL QUICK ATTACH OPTIONS (Cont.)
36” Grading Blade
36 inch 3.0 cu. ft. TILT GRADING BUCKET
Includes hoses and fittings. Tilts 45° each direction.
39 inch 4.72 cu. ft. Tilt Grading Bucket
KK Hydraulic Upgrade Base Kit
KK Hydraulic Upgrade Completion Kit
30 inch 5.31 cu. ft. Trenching Bucket
36 inch 6.64 cu. ft. Drainage BucketK7877A not authorized for thumb applications
Includes hoses and fittings. Tilts 45° each direction
KUBOTA KONNECT® (KK) QUICK COUPLER OPTIONS
KK Hydraulic Quick Coupler Base KitBase coupler. Requires K7101 completion kit.
KK Hydraulic Coupler Completion KitContains hoses, fittings, guards, electrical components required to complete K7100 Kit
KK Mechanical Coupler Base Kit
KK Mechanical Coupler Completion Kit
Converts the K106 Mechanical System to a KK Hydraulic System. Must also order the K7111
Contains hoses, fittings, guards, electrical components required to complete K7110 Kit
12" 2.13 cu. ft. KK Quick Attach Trenching Bucket
16" 2.83 cu. ft. KK Quick Attach Trenching Bucket
24” Excavating Rake
24" 4.25 cu. ft. KK Quick Attach Trenching Bucket
18" 3.19 cu. ft. KK Quick Attach Trenching BucketThe K7118 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
24" KK Quick Attach Excavating Rake
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-38
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
K7120 265 $1,467.00
K7121 230 $1,240.00
K7122 270 $1,400.00
K7123 305 $4,230.00
K7124 185 $5,150.00
K7127 24 $365.00
K7128 24 $365.00
PART 3
K7902 190 $2,558.00
K7474 36 $150.00
K7455 44 $150.00
KXB510Q 610 $9,300.00
K7774 16 $645.00
K7992 95 $797.00 Hammer
K7126 95 $885.00 for KXB510Q Hammer
K7773 5 $985.00
K9919 4 $124.00
HYDRAULIC BREAKER HOSE KITRequired for KXB510Q installations
Mechanical Quick Attach (K7870) Hammer Bracket for KXB510Q
39" 4.72 cu. ft. KK Quick Attach Tilt Grading Bucket
ATTACHMENTS
HYDRAULIC THUMB KITK7870, K7100, K7106, or K7110 Quick Coupler required
36" Bolt On Cutting EdgeFor K9836A, K7877A, K7473, K7121, or K7123 36" Buckets
BUCKET HANGERS, CONTOURED BUCKETS
30" 5.31 cu. ft. KK Quick Attach Trenching Bucket
36" 6.64 cu. ft. KK Quick Attach Drainage Bucket
36" KK Quick Attach Grading Blade
36" 3.0 cu. ft. KK Quick Attach Tilt Grading Bucket
KK Quick Attach (K7100, K7106, or K7110) Hammer Bracket
ACCUMULATOR CHARGE KITRequired for hydraulic breaker maintenance only, one kit for servicing all breakers.
CANOPY WORK LIGHT KIT
Converts Mechanical Quick Attach Buckets to KK quick coupler style. Already contoured to match mechanical quick coupler bucket profile.
BUCKET HANGERS, NON-CONTOURED BUCKETSConverts other brand buckets to KK quick coupler style. Modification to match bucket contour required.
DESCRIPTION
KUBOTA KONNECT® (KK) QUICK COUPLER OPTIONS (Cont.)
39" Bolt On Cutting EdgeFor K7454 or K7124 39” Tilt Grading Bucket
HYDRAULIC BREAKER, 500 ft. lbs. ratedIncludes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7992 or K7126 mount bracket
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-39
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K9929 439 $3,762.00
K9777 3 $280.00
K9949 8 $240.00
K9969 HEAT INSULATION KIT 2.2 $16.00
PART 4
K7894 220 $1,106.00
K7895 450 $5,903.00
K9946 4 $124.00
K7856C 8.2 $470.00
radio, MP3 port, mounting kit, speakers, and antenna
DESCRIPTION CONTACT:Earth Auger McMillenModel 975, 1475, 1975 503 Gay Street
Delhi, Iowa 52223
Vibratory CompactorModel 500B 3900 Kelly Avenue
Flail MowerModel 30EX PO Box 22
Hughson, CA 95326
Available from Parts
STEEL CRAWLER KITConvert tracks from rubber to steel
TRAVEL ALARM KITEmits an audible signal when traveling forward or reverse
SPARK ARRESTOR MUFFLER KIT
Optional kit for use in close proximity with grass, brush, timber and similar cellulose material with potential for ignition. Requires K9969 Heat Insulation Kit
Required for K9949 installation
The K7895 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
Compatible with cab models only. Kit includes AM/FM/WB
Website: http://www.AlliedCP.com
Allied Construction Products, LLC
RETRACTABLE SEAT BELT OPTION (3”)As required in some states for OSHA compliance.
RADIO OPTION
(563) 922-2981 Fax (563) 922-2700
Cleveland, OH 44114Tel: (404) 435-6947, Fax: (216) 431-2601
Rockhound Attachments
Tel: (800) 426-5615, Fax: (360) 230-2322
70000-00297 Block Heater Kit
ROPS / OPG (Top Guard, Level I)
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
DESCRIPTION
ATTACHMENTS (Cont.)
Website: http://www.Rockhound.com
REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I) CANOPY
ALLIED ATTACHMENT CONTACTS
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-40
KUBOTAK Series KX040-4
KX040-4 Hydraulic Excavator
FEATURES BASIC UNITS (cont’d)Eco Plus System KX040-4S1P, Steel Tracks, 4-Post ROPS/OPG (TOP Auto Idler GUARD, LEVEL I) Canopy, Dozer Blade, SP2 Rubber Or Steel Track Models KX040-4S1AP, Steel Tracks, 4-Post ROPS/OPG (TOP ROPS/OPG (Top Guard, Level I) 4-Post Canopy or Air GUARD, LEVEL I) Canopy, Angle Dozer Blade, SP2 Conditioning Cab KX040-4S1TP, Steel Tracks, 4-Post ROPS/OPG (TOP Suspension Seat GUARD, LEVEL I) Canopy, 6-in-1 Dozer Blade, SP2 Kubota 1 Hydraulic Pump Load Sensing System KX040-4S3, Steel Tracks, Air Conditioned ROPS/OPG 1 Variable Displacement Pump (TOP GUARD, LEVEL I) Cab, Dozer Blade All Controls Hydraulic Pilot Controls KX040-4S3A, Steel Tracks, ROPS/OPG (TOP GUARD, Two Operating Pattern Selection System LEVEL I) Air Conditioned Cab, Angle Dozer Blade Accumulator KX040-4S3T, Steel Tracks, ROPS/OPG (TOP GUARD, Digital Control Panel LEVEL I) Air Conditioned Cab, 6-in-1 Dozer Blade Attachment Flow Presets, Service Alerts KX040-4S3P, Steel Tracks, Air Conditioned ROPS/OPG Standard Front Dozer Blade w/ Float (TOP GUARD, LEVEL I) Cab, Dozer Blade, SP2 Optional Float Angle Blade w/ Bolt-on Cutting Edge KX040-4S3AP, Steel Tracks, ROPS/OPG (TOP GUARD, 360 Degree Full Rotation LEVEL I) Air Conditioned Cab, Angle Dozer Blade, SP2 70 Degree Left, 55 Degree Right Boom Swing KX040-4S3TP, Steel Tracks, ROPS/OPG (TOP GUARD, 17.2 gpm Adjustable Auxiliary Hydraulics Port 1 LEVEL I) Air Conditioned Cab, 6-in-1 Dozer Blade, SP2 Auxiliary Hydraulics Diverter Valve 9.8 gpm Adjustable Auxiliary Hydraulics Port 2 Option DIMENSIONS AND OPERATING WEIGHT Thumb Bracket and Relief Valves KX040-4R1, Rubber Tracks, 4-Post ROPS/OPG (TOP Five Second Quick Preheat System GUARD, LEVEL I) Canopy, Dozer Blade Key Switch Stop System Overall Length 16’ 8.2” Half Pitch Rubber Tracks Overall Width 5’ 6.9”
Self-Bleed Fuel System Overall Height 8’ 1.8” Auto-Downshift Two Speed Travel System Operating Weight* 9,545 lbs. Swivel Negative Brake Ground Clearance 12.9” Travel Negative Brake Third Line KX040-4R3A, Rubber Tracks, Air Conditioned ROPS/OPG (TOP GUARD, LEVEL I) Cab, BASIC UNITS Angle Dozer Blade KX040-4R1, Rubber Tracks, 4-Post ROPS/OPG (TOP Overall Length 16’ 8.1” GUARD, LEVEL I) Canopy, Dozer Blade Overall Width 5’ 6.9” KX040-4R1A, Rubber Tracks, ROPS/OPG (TOP GUARD, Overall Height 8’ 1.8” LEVEL I) Canopy, Angle Dozer Blade Operating Weight* 9,195 lbs. KX040-4R1T, Rubber Tracks, ROPS/OPG (TOP GUARD, Ground Clearance 12.9” LEVEL I) Canopy, 6-in-1 Dozer Blade * Includes operator’s weight, 175 lbs. KX040-4R1P, Rubber Tracks, 4-Post ROPS/OPG (TOP GUARD, LEVEL I), Canopy, Dozer Blade, SP2 ENGINEKX040-4R1AP, Rubber Tracks, 4-Post ROPS/OPG (TOP D1803 Kubota DI CRS Turbo Tier 4 Diesel Engine GUARD, LEVEL I) Canopy, Angle Dozer Blade, SP2 3 Cylinder, 4 Cycle KX040-4R1TP, Rubber Tracks, 4-Post ROPS/OPG (TOP 40.4 Net HP @ 2200 rpm GUARD, LEVEL I) Canopy, 6-in-1 Dozer Blade, SP2 KX040-4R3, Rubber Tracks, Air Conditioned ROPS/OPG OPERATIONAL DIMENSIONS (TOP GUARD, LEVEL I) Cab, Angle Dozer Blade Max Digging Depth 11’ 2.7” KX040-4R3A, Rubber Tracks, Air Conditioned ROPS/OPG Max Digging Radius @ Ground Level 17’ 9.0” (TOP GUARD, LEVEL I) Cab, Angle Dozer Blade Max Vertical Digging Depth 7’ 4.8” KX040-4R3T, Rubber Tracks, Air Conditioned ROPS/OPG Max Dumping Height 12’ 9.5” (TOP GUARD, LEVEL I) Cab, 6-in-1 Dozer Blade KX040-4R3P, Rubber Tracks, Air Conditioned ROPS/OPG STANDARD DOZER BLADE DIMENSIONS (TOP GUARD, LEVEL I) Cab, Dozer Blade, SP2 Width 66.9” KX040-4R3AP, Rubber Tracks, Air Conditioned ROPS/OPG Height 15.75” (TOP GUARD, LEVEL I), Cab, Angle Dozer Blade, SP2 Lift Above Ground 15.17” KX040-4R3TP, Rubber Tracks, Air Conditioned ROPS/OPG Drop Below Ground 15.94” (TOP GUARD, LEVEL I), Cab, 6-in-1 Dozer Blade, SP2 KX040-4S1, Steel Tracks, 4-Post ROPS/OPG (TOP PERFORMANCE GUARD, LEVEL I) Canopy, Dozer Blade Digging Force @ Bucket (K7875) 9,535 lbs. KX040-4S1A, Steel Tracks, 4-Post ROPS/OPG (TOP Digging Force @ Dipper Arm 4,112 lbs. GUARD, LEVEL I) Canopy, Angle Dozer Blade Travel Speed (Low) 1.8 mph KX040-4S1T, Steel Tracks, 4-Post ROPS/OPG (TOP Travel Speed (High) 3.1 mph GUARD, LEVEL I) Canopy, 6-in-1 Dozer Blade Climbing Ability 36% / 20° KX040-4S1P, Steel Tracks, 4-Post ROPS/OPG (TOP Lift Capacity 4,080 lbs. GUARD, LEVEL I) Canopy, Dozer Blade, SP2 Over Front, Blade Grounded 2.0 ft. Load Point Height, 8.0 ft. Load radius
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-41
KUBOTAK Series KX040-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
KX040-4R1 9,195 $54,200.00 With:
K7864A 225 $1,235.00 $55,435.00
KX040-4R3A 9,855 $62,900.00 With:
K7870 72 $904.00 K7875 240 $1,269.00 K7910 Hydraulic Thumb Kit 195 $2,558.00
$67,631.00
Rubber Tracks
Rubber Tracks
Quick Coupler
Excavator Basic Unit
Angle Dozer BladeDipper arm
ATTACHMENTS:
BASIC UNIT:
Dipper armCounterweight
24” 4.30 cu. ft. 3-Hole H. D. Bucket
24” 4.25 cu. ft. Trenching Bucket
Counterweight
4-Post ROPS/OPG (Top Guard, Level I) Canopy
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab
Dozer Blade
STANDARD UNIT KX040-4R3A COMPLETE ORDER AND PRICEBASIC UNIT:
DESCRIPTION
Excavator Basic Unit
ATTACHMENTS:
STANDARD UNIT KX040-4R1 COMPLETE ORDER AND PRICE
HOW TO SELECT A KX040-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX040-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX040-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-42
KUBOTAK Series KX040-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
Excavator Basic Unit 9,195 $54,200.00
With:
Canopy, Dozer Blade, Dipper Arm, Counterweight
9,545 $56,700.00
With:
Canopy, Angle Dozer Blade, Dipper Arm, Counterweight
KX040-4R1T 9,635 $60,550.00 With:
Excavator Basic Unit 9,195 $55,800.00 With:
Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2
Excavator Basic Unit 9,545 $58,300.00
With:
Canopy, Angle Dozer Blade, Dipper Arm, Counterweight, SP2
KX0404R1TP 10,010 $62,150.00 With:
Excavator Basic Unit 9,500 $60,400.00
With:
Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Excavator Basic Unit 9,855 $62,900.00
With:
KX040-4R3T 9,655 $66,750.00 With:
Excavator Basic Unit 9,500 $62,000.00 With:
Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2
Excavator Basic Unit 9,855 $64,500.00 With:
KX0404R3TP Excavator Basic Unit 10,010 $68,350.00 With:
Excavator Basic Unit 9,350 $55,700.00 With:
Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
KX040-4R3A
Counterweight
Excavator Basic Unit
DESCRIPTION
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
KX040-4R3APRubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
MODEL KX040-4 BASIC UNITS
KX040-4R1
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
KX040-4R1A Excavator Basic Unit
KX040-4R3P
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm, Counterweight, SP2
KX040-4S1Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
Excavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight
KX040-4R1PRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
KX040-4R1AP
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
Excavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight,
KX040-4R3
SP2
Level I) Cab, Angle Dozer Blade, Dipper Arm,
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-43
KUBOTAK Series KX040-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
9,700 $58,200.00 With:
Excavator Basic Unit 9,635 $62,050.00 With:
Excavator Basic Unit 9,350 $57,300.00 With:
Excavator Basic Unit 9,700 $59,800.00 With:
10,010 $63,650.00 With:
Excavator Basic Unit 9,635 $61,900.00 With:
Excavator Basic Unit 10,010 $64,400.00 With:
9,655 $68,250.00 With:
Excavator Basic Unit 9,655 $63,500.00 With:
Excavator Basic Unit 10,010 $66,000.00 With:
Excavator Basic Unit 10,010 $69,850.00 With:
Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm,Counterweight, SP2
KX040-4S3T Excavator Basic UnitSteel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm, Counterweight
KX040-4S3PSteel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2
KX040-4S3APSteel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2
KX0404S3TP
Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight
KX040-4S1A Excavator Basic UnitSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Dozer Blade, Dipper Arm, Counterweight
KX040-4S1PSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
KX040-4S1APSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
SP2
KX0404S1TPSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight, SP2
KX040-4S3
Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
KX040-4S3ASteel Tracks, Air Conditioned ROPS/OPG (Top Guard,
Steel Tracks, Air Conditioned ROPS/OPG (Top Guard,
DESCRIPTION
MODEL KX040-4 BASIC UNITS (Cont.)
Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2
Steel Tracks, Air Conditioned ROPS/OPG (Top Guard,
Excavator Basic Unit
KX040-4S1TSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight
Canopy, Angle Dozer Blade, Dipper Arm, Counterweight,
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-44
KUBOTAK Series KX040-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7792A 200 $1,000.00
K7793 214 $1,075.00
K7794 223 $1,123.00
K7796 260 $1,238.00
K7797 283 $1,357.00
K9836A 194 $988.00
K7870 72 $904.00
K9807 88 $326.00
K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
K7461 300 $1,878.00
K7876 265 $1,467.00
K7877A 230 $1,129.00
K7458 270 $1,360.00
K7473 305 $4,336.00
K7454 485 $4,920.00
12 inch 2.13 cu. ft. Trenching Bucket
16 inch 2.83 cu. ft. Trenching Bucket
18 inch 3.19 cu. ft. Trenching BucketThe K7874 bucket has four teeth. The K7910 Thumb tines contact the end of the teeth and do not mesh between the teeth.
30 inch 5.80 cu. ft. 3-Hole Bucket
36 inch 4.17 cu. ft. Drainage Bucket
QUICK ATTACH BUCKETS
MECHANICAL QUICK ATTACH OPTIONS
QUICK COUPLERCurl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.
BUCKET HANGERS
Set of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
Includes hoses and fittings. Tilts 45° each direction.
39 inch 4.72 cu. ft. Tilt Grading BucketIncludes hoses and fittings. Tilts 45° each direction
DESCRIPTION
BUCKET OPTIONS
12 inch 2.6 cu. ft. 3-Hole Bucket
16 inch 2.80 cu. ft. 3-Hole Bucket
18 inch 3.20 cu. ft. 3-Hole Bucket
24 inch 4.50 cu. ft. 3-Hole Bucket
36 inch 6.64 cu. ft. Drainage Bucket
24 inch 4.25 cu. ft. Trenching Bucket
24” Excavating Rake
30 inch 5.31 cu. ft. Trenching Bucket
36” Grading Blade
36 inch 3.0 cu. ft. TILT GRADING BUCKET
PIN-ON BUCKETS (Order attaching pins from Parts)
K7877A not authorized for thumb applications
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-45
KUBOTAK Series KX040-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
K7100 72 $1,900.00
K7101 180 $1,150.00
K7106 180 $1,040.00
K7108 180 $250.00
K7110 180 $1,015.00
K7112 180 $1,030.00
K7116 160 $985.00
K7117 185 $1,020.00
K7118 190 $1,085.00
K7119 240 $1,270.00
K7125 300 $1,895.00
K7120 265 $1,467.00
K7121 230 $1,240.00
K7122 270 $1,400.00
K7123 305 $4,230.00
K7124 185 $5,150.00
K7127 24 $365.00
K7128 24 $365.00
KK Hydraulic Quick Coupler Base Kit
KK Hydraulic Coupler Completion Kit
Converts the K106 Mechanical System to a KK Hydraulic System. Must also order the K7112
Contains hoses, fittings, guards, electrical components required to complete K7110 Kit
12" 2.13 cu. ft. KK Quick Attach Trenching Bucket
16" 2.83 cu. ft. KK Quick Attach Trenching Bucket
18" 3.19 cu. ft. KK Quick Attach Trenching Bucket
24" KK Quick Attach Excavating Rake
36" 6.64 cu. ft. KK Quick Attach Drainage Bucket
36" KK Quick Attach Grading Blade
BUCKET HANGERS, NON-CONTOURED BUCKETS
Contains hoses, fittings, guards, electrical components required to complete K7100 Kit
KK Mechanical Coupler Base KitMechanical operation only. Requires K7108 completion kit.
DESCRIPTION
Contains components required to complete the K7106 kit.
KK Hydraulic Upgrade Base Kit
KK Hydraulic Upgrade Completion Kit
The K7118 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
Converts other brand buckets to KK quick coupler style. Modification to match bucket contour required.
BUCKET HANGERS, CONTOURED BUCKETS
36" 3.0 cu. ft. KK Quick Attach Tilt Grading Bucket
39" 4.72 cu. ft. KK Quick Attach Tilt Grading Bucket
KUBOTA KONNECT® (KK) QUICK COUPLER OPTIONS
Base coupler. Requires K7101 completion kit.
KK Mechanical Coupler Completion Kit
Converts Mechanical Quick Attach Buckets to KK quick coupler style. Already contoured to match mechanical quick coupler bucket profile.
24" 4.25 cu. ft. KK Quick Attach Trenching Bucket
30" 5.31 cu. ft. KK Quick Attach Trenching Bucket
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-46
KUBOTAK Series KX040-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K7910 190 $2,558.00
K7474 41 $150.00
K7455 44 $150.00
KXB510Q 610 $9,000.00
K7774 16 $645.00
K7992 95 $797.00
K7126 95 $885.00 for KXB510Q Hammer
K7773 5 $985.00
K7940 6 $135.00
K9929 439 $3,762.00
K7927 2 $143.00
PART 4K9153 250 $1,850.00
CANOPY
K9152 390 $8,150.00
K7479 4 $280.00
K9946 4 $124.00
Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7992 or K7126 mount bracket
HYDRAULIC BREAKER HOSE KIT
Required for KXB510Q installations
Mechanical Quick Attach (K7870) Hammer Bracket for
KK Quick Attach (K7100, K7106, or K7110) Hammer Bracket
Cab Mirror Kit
KXB510Q Hammer
ATTACHMENTS
HYDRAULIC THUMB KITK7870, K7100, K7106, or K7110 Quick Coupler required
36" Bolt On Cutting EdgeFor K9836A, K7877A, K7473, K7121, or K7123 36" Buckets
39" Bolt On Cutting EdgeFor K7454 or K7124 39” Tilt Grading Bucket
HYDRAULIC BREAKER, 500 ft. lbs. rated
The K9152 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
As required in some states for OSHA compliance.
one rear mirror, and attaching hardware
RETRACTABLE SEAT BELT OPTION (3”)
ACCUMULATOR CHARGE KITRequired for hydraulic breaker maintenance only, one kit for servicing all breakers.
CANOPY WORK LIGHT KIT
STEEL CRAWLER KITConvert tracks from rubber to steel
TRAVEL ALARM KITEmits an audible signal when traveling forward or reverse
ROPS / OPG (Top Guard, Level I)REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I)
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
DESCRIPTION
Includes two side mirrors, one for each side,
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-47
KUBOTAK Series KX040-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4K7942A 8 $248.00
DESCRIPTION CONTACT:Earth Auger McMillenModel 975, 1475, 1975 503 Gay Street
Delhi, Iowa 52223
Vibratory CompactorModel 500B 3900 Kelly Avenue
Flail MowerModel 30EX PO Box 22
Hughson, CA 95326
Available from Parts
ROPS / OPG (Top Guard, Level I) (Cont.)RADIO OPTION
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
DESCRIPTION
Cleveland, OH 44114Tel: (404) 435-6947, Fax: (216) 431-2601
Rockhound Attachments
Tel: (800) 426-5615, Fax: (360) 230-2322
70000-00297 Block Heater Kit
Website: http://www.AlliedCP.com
Website: http://www.Rockhound.com
(563) 922-2981 Fax (563) 922-2700Allied Construction Products, LLC
ALLIED ATTACHMENT CONTACTS
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-48
KUBOTAK Series U55-4
U55-4Tight Tail Swing Hydraulic Excavator
FEATURES ENGINEEco Plus System V2607 Kubota DI CRS Tier 4 Diesel Engine Auto Idler 4 Cylinder, 4 Cycle Rubber Or Steel Track Models 47.1 Net HP @ 2200 rpm 4-Post ROPS/OPG (Top Guard Level I) Canopy or Air Conditioned Cab Suspension Seat OPERATIONAL DIMENSIONS Kubota 3 Hydraulic Pump Load Sensing System Max Digging Depth 11’ 10.3” 1 Gear, 2 Variable Displacement Pumps Max Digging Radius @ Ground Level 19’ 6.1” All Controls Hydraulic Pilot Controls Max Vertical Digging Depth 4’ 11.6” Two Operating Pattern Selection System Max Dumping Height 13’ 2.3” Accumulator Digital Control Panel STANDARD DOZER BLADE DIMENSIONS Attachment Flow Presets, Service Alerts Width 77.2” Standard Front Dozer Blade w/ Float Height 16.1” Optional Float Angle Blade w/ Bolt-on Cutting Edge Lift Above Ground 17.3” 360 Degree Full Rotation Drop Below Ground 16.1” 70 Degree Left, 55 Degree Right Boom Swing 19.8 gpm Adjustable Auxiliary Hydraulics Port 1 PERFORMANCE Auxiliary Hydraulics Diverter Valve Digging Force @ Bucket (K7919) 11,177 lbs. 9.8 gpm Adjustable Auxiliary Hydraulics Port 2 Option Digging Force @ Dipper Arm 6,261 lbs. Thumb Bracket And Relief Valves Travel Speed (Low) 1.8 mph Five Second Quick Preheat System Travel Speed (High) 3.1 mph Key Switch Stop System Climbing Ability 36% / 20° Half Pitch Rubber Tracks Lift Capacity 3,700 lbs. Self-Bleed Fuel System Over Front Auto-Downshift Two Speed Travel System Blade Grounded Swivel Negative Brake 4.0 Ft. Load Point Height Travel Negative Brake 12.0 Ft. Load Radius Third Line DIMENSIONS AND OPERATING WEIGHT BASIC UNITS U55-4R1, Rubber Tracks, ROPS/OPG (Top Guard Level U55-4R1, Rubber Tracks, ROPS/OPG (Top Guard, I) Canopy, Dozer Blade, Dipper Arm, Counterweight Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight U55-4R1P, Rubber Tracks, ROPS/OPG (Top Guard, Level Overall Length 18’ 1.3” I) Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2 Overall Width 6’ 5.2” U55-4R1A, Rubber Tracks, ROPS/OPG (Top Guard, Level Overall Height 8’ 4.4” I) Canopy, Angle Dozer Blade, Dipper Arm, Counterweight Operating Weight* 11,915 lbs. U55-4R1AP, Rubber Tracks, ROPS/OPG (Top Guard, Ground Clearance 12’ 0.2” Level I) Canopy, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 U55-4R3AP, Rubber Tracks, ROPS/OPG (Top Guard U55-4R3, Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) A/C Cab, Angle Dozer Blade, Dipper Arm, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight Counterweight, SP2 U05-4R3P, Rubber Tracks, A/C ROPS/OPG (Top Guard, Overall Length 18’ 1.3” Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2 Overall Width 6’ 5.2” U55-4R3A, Rubber Tracks, A/C ROPS/OPG (Top Guard, Overall Height 8’ 4” Level I) Cab, Angle Dozer Blade, Dipper Arm, Operating Weight* 12,535 lbs. Counterweight Ground Clearance 12.0.2” U55-4R3AP, Rubber Tracks, A/C ROPS/OPG (Top Guard, * Includes operator’s weight, 175 lbs. Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 U55-4S3A, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight U55-4S3AP, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-49
KUBOTAK Series U55-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
U55-4R1 12,200 $67,000.00 With:
K7915 100 $851.00 K7919 295 $1,219.00
$69,070.00
U55-4R3AP 12,535 $77,600.00 With:
K7915 100 $851.00 K7937 195 $2,147.00 K7919 295 $1,219.00
$81,817.00
Dipper arm
Two Service Ports
Excavator Basic Unit
Hydraulic Thumb
Counterweight
Rubber Tracks
24” 6.3 cu. ft. Trenching Bucket
Angle Dozer BladeDipper arm
Quick Coupler
Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) Canopy
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab
ATTACHMENTS:
BASIC UNIT:
DESCRIPTION
BASIC UNIT:
Dozer Blade
Excavator Basic Unit
ATTACHMENTS:
STANDARD UNIT U55-4R3AP COMPLETE ORDER AND PRICE
Quick Coupler
CounterweightOne Service Port
24” 6.3 cu. ft. Trenching Bucket
STANDARD UNIT U55-4R1 COMPLETE ORDER AND PRICE
HOW TO SELECT A U55-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete U55-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a U55-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard Level I) Canopy, dozer blade, dipper arm, counterweight, and one service port
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-50
KUBOTAK Series U55-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
U55-4R1 12,200 $67,000.00 With:
U55-4R1P 12,200 $68,600.00 With:
U55-4R1A 11,915 $69,800.00 With:
U55-4R1AP 11,915 $71,400.00 With:
U55-4R3 12,400 $73,200.00 With:
U55-4R3P 12,400 $74,800.00 With:
U55-4R3A 12,535 $76,000.00 With:
U55-4R3AP 12,535 $77,600.00 With:
U55-4S3A 12,755 $77,500.00 With:
U55-4S3AP 12,755 $79,100.00 With:
Canopy, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2
Excavator Basic Unit
DESCRIPTION
Excavator Basic Unit
Excavator Basic Unit
Excavator Basic Unit
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Blade, Dipper Arm, Counterweight
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Blade, Dipper Arm, Counterweight, SP2
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab,
Excavator Basic Unit
Excavator Basic Unit
Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight
Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2
Excavator Basic Unit
Excavator Basic Unit
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
MODEL U55 BASIC UNITS
Excavator Basic Unit
Excavator Basic Unit
Dozer Blade, Dipper Arm, Counterweight, SP2
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-51
KUBOTAK Series U55-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7915 100 $851.00
K7916 82 $294.00
K7917 249 $1,138.00
K7918 275 $1,155.00
K7919 295 $1,219.00
K7920 338 $1,486.00
K7921 368 $1,658.00
K7926 265 $1,200.00
K7922 230 $1,138.00
K7474 41 $150.00
K7924 270 $1,627.00
K7878 51 $200.00
PART 3K7937 195 $2,147.00
K7932 325 $1,090.00
KXB560Q 820 $12,250.00
K7931 99 $797.00
K7941 22 $567.00
K7773 5 $985.00
K7940 20 $135.00
K7927 7 $143.00
K7938 1298 $5,150.00
Bolt On Cutting Edge for K7924 48” Drainage Bucket
Bolt On Cutting Edge for K7922 36” Drainage Bucket
36 inch 3.48 cu. ft. Cemetery Bucket
36 inch 6.64 cu. ft. Drainage BucketPre-drilled for bolt on cutting edge.
48 inch 8.50 cu. ft. Drainage Bucket
on models with K7937 thumb.Pre-drilled for bolt on cutting edge. Not authorized for use
Includes two mounting pins, 1 locking pin and hardware.
30 inch 8.00 cu. ft. Trenching Bucket
36 inch 8.00 cu. ft. Trenching Bucket
FROST RIPPER
HYDRAULIC BREAKER
ACCUMULATOR CHARGE KIT
Required for all KXB560Q installations
BREAKER MOUNT BRACKETRequired for all KXB560Q installations
BREAKER HOSE KIT
Includes manual, one moil point and one chisel point. Requires K7931 Breaker Mount Bracket and K7941 Hose Kit.
CANOPY WORK LIGHT KIT
TRAVEL ALARM KIT
Steel Crawler Kit
12 inch 3.00 cu. ft. Trenching Bucket
18 inch 4.50 cu. ft. Trenching Bucket
24 inch 6.30 cu. ft. Trenching Bucket
HYDRAULIC THUMB KIT
QUICK ATTACH BUCKETS
Quick Coupler
ATTACHMENTS
The K7918 bucket has four teeth. The K7937 thumb tines contact the end of the teeth and do not mesh between the teeth.
K7915 Quick Coupler required.
Set of two ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
Bucket Hangers
DESCRIPTION
Converts tracks from rubber to steel
Required for hydraulic breaker maintenance only, one kit for servicing all breakers
Emits an audible signal when traveling forward or reverse.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-52
KUBOTAK Series U55-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4
K7935 250 $1,550.00
K7936 390 $6,600.00
K7479 4 $280.00
K9946 4 $124.00
K7942A 6 $248.00
V4218A 3 $176.00 STROBE LIGHT KIT
DESCRIPTION
RETRACTABLE SEAT BELT OPTION (3”)As required in some states for OSHA compliance.
RADIO OPTION
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
Cab Mirror KitIncludes two side mirrors, one for each side, one rear mirror, and attaching hardware
The K7936 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, air conditioner, heater, or defroster. Refer to illustrated parts list to order these components.
REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I) CANOPY
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
ROPS / OPG (Top Guard, Level I)
Cab pre-wired with switch. A new bracket must be created for the installation. See installation instructions.
ALLIED ATTACHMENT CONTACTS
DESCRIPTION CONTACT:
Earth Auger Model 975, 1475, 1975
McMillen 503 Gay Street Delhi, IA 52223 Tel: (800) 922-2981, Fax (319) 922-2700 Website: www.paladinbrands.com
Vibratory Compactor Model 500B, 1000B
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: hppt://www.AlliedCP.com
Flail Mower Model 30EX
Rockhound Attachments PO Box 220 Hughson, CA 95326 Tel: (800) 426-5615, Fax (360) 230-2322 Website: www.rockhound.com
Available from Parts
70000-73274 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-53
KUBOTA
This page intentionally left blank.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-54
KUBOTAK Series KX057-4
KX057-4Hydraulic Excavator
FEATURES ENGINEEco Plus System V2607 Kubota DI CRS Tier 4 Diesel Engine Auto Idler 4 Cylinder, 4 Cycle Rubber Or Steel Track Models 47.1 Net HP @ 2200 rpm 4-Post ROPS/OPG (Top Guard, Level I) Canopy or Air Conditioned Cab Suspension Seat OPERATIONAL DIMENSIONS Kubota 3 Hydraulic Pump Load Sensing System Max Digging Depth 12’ 8.2” 1 Gear, 2 Variable Displacement Pumps Max Digging Radius @ Ground Level 20’ 0.5” All Controls Hydraulic Pilot Controls Max Vertical Digging Depth 5’ 7.3” Two Operating Pattern Selection System Max Dumping Height 13’ 8.6” Accumulator Digital Control Panel STANDARD DOZER BLADE DIMENSIONS Attachment Flow Presets, Service Alerts Width 77.2” Standard Front Dozer Blade w/ Float Height 16.1” Optional Float Angle Blade w/ Bolt-on Cutting Edge Lift Above Ground 17.3” 360 Degree Full Rotation Drop Below Ground 16.1” 70 Degree Left, 55 Degree Right Boom Swing 19.8 gpm Adjustable Auxiliary Hydraulics Port 1 PERFORMANCE Auxiliary Hydraulics Diverter Valve Digging Force @ Bucket (K7919) 11,177 lbs. 9.8 gpm Adjustable Auxiliary Hydraulics Port 2 Option Digging Force @ Dipper Arm 5,644 lbs. Thumb Bracket And Relief Valves Travel Speed (Low) 1.8 mph Five Second Quick Preheat System Travel Speed (High) 3.1 mphKey Switch Stop System Climbing Ability 36% / 20° Half Pitch Rubber Tracks Lift Capacity 3,410 lbs. Self Bleed Fuel System Over Front Auto-Downshift Two Speed Travel System Blade Grounded Swivel Negative Brake 4.0 Ft. Load Point Height Travel Negative Brake 12.0 Ft. Load Radius Third Line DIMENSIONS AND OPERATING WEIGHT KX057-4R1, Rubber Tracks, ROPS/OPG (Top Guard, BASIC UNITS Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight KX057-4R1, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Overall Length 18’ 1.3” Canopy, Dozer Blade, Dipper Arm, Counterweight Overall Width 6’ 5.2” KX057-4R1P, Rubber Tracks, ROPS/OPG (Top Guard, Overall Height 8’ 4.4” Level I) Canopy, Dozer Blade, Dipper Arm, Operating Weight* 12,200 lbs. Counterweight, SP2 Ground Clearance 12’ 0.2” KX057-4R1A, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Canopy, Angle Dozer Blade, Dipper Arm, KX057-4R3AP, Rubber Tracks, ROPS/OPG (Top Guard, Counterweight A/C Cab, Angle Dozer Blade, Dipper Arm, KX057-4R1AP, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Counterweight, SP2 Canopy, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 Overall Length 18’ 1.3” KX057-4R3, Rubber Tracks, A/C ROPS/OPG (Top Guard, Overall Width 6’ 5.2” Level I) Cab, Dozer Blade, Dipper Arm, Counterweight Overall Height 8’ 4” KX057-4R3P, Rubber Tracks, A/C ROPS/OPG (Top Guard, Operating Weight* 12,535 lbs. Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2 Ground Clearance 12.0.2” KX057-4R3A, Rubber Tracks, A/C ROPS/OPG (Top Guard, * Includes operator’s weight, 175 lbs. Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, KX057-4R3AP, Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 KX057-4S3A, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight KX057-4S3AP, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-55
KUBOTAK Series KX057-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
KX057-4R1 11,637 $71,200.00 With:
K7915 100 $851.00 K7919 295 $1,219.00
$73,270.00
KX057-4R3AP 12,252 $81,800.00 With:
K7915 100 $851.00 K7937 195 $2,147.00 K7919 295 $1,219.00
$86,017.00
DESCRIPTION
4-Post ROPS/OPG (Top Guard, Level I) Canopy
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab
Dipper arm
BASIC UNIT:
Rubber Tracks
24” 6.3 cu. ft. Trenching Bucket
One Service PortCounterweight
ATTACHMENTS:
Excavator Basic Unit
Excavator Basic UnitRubber Tracks
Dipper arm
Quick Coupler
24” 6.3 cu. ft. Trenching Bucket
CounterweightTwo Service Ports
Quick Coupler
Dozer Blade
Angle Dozer Blade
Hydraulic Thumb
ATTACHMENTS:
STANDARD UNIT KX057-4R1 COMPLETE ORDER AND PRICE
STANDARD UNIT KX057-4R3AP COMPLETE ORDER AND PRICE
BASIC UNIT:
HOW TO SELECT A KX057-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX057-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX057-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm, counterweight, and one service port
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-56
KUBOTAK Series KX057-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX057-4R1 12,200 $71,200.00 With:
KX057-4R1P 12,200 $72,800.00 With:
KX057-4R1A 12,620 $74,000.00 With:
KX057-4R1AP 12,620 $75,600.00 With:
KX057-4R3 12,400 $77,400.00 With:
KX057-4R3P 12,400 $79,000.00 With:
KX057-4R3A 12,620 $80,200.00 With:
KX057-4R3AP 12,620 $81,800.00 With:
KX057-4S3A 12,755 $81,700.00 With:
KX057-4S3AP 12,755 $83,300.00 With:
Excavator Basic Unit
Excavator Basic Unit
Excavator Basic Unit
Excavator Basic Unit
Excavator Basic Unit
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Blade, Dipper Arm, Counterweight
Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)
Dozer Blade, Dipper Arm, Counterweight, SP2
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2
Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight
Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2
Excavator Basic Unit
Canopy, Angle Blade, Dipper Arm, Counterweight, SP2
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I)
Excavator Basic Unit
Excavator Basic Unit
Excavator Basic Unit
DESCRIPTION
Excavator Basic Unit
MODEL KX057-4 BASIC UNITS
Cab, Dozer Blade, Dipper Arm, Counterweight
Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab,
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-57
KUBOTAK Series KX057-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7915 100 $851.00
K7916 82 $294.00
K7917 249 $1,138.00
K7918 275 $1,155.00
K7919 295 $1,219.00
K7920 338 $1,486.00
K7921 368 $1,658.00
K7926 265 $1,200.00
K7922 230 $1,138.00
K7474 41 $150.00
K7924 270 $1,627.00
K7878 51 $200.00
PART 3 ATTACHMENTSK7937 195 $2,147.00
K7932 325 $1,090.00
KXB560Q 820 $12,250.00
K7931 99 $797.00
K7941 22 $567.00
K7773 5 $985.00
K7940 20 $135.00
K7927 7 $143.00
Required for hydraulic breaker maintenance only, one kit for servicing all breakers
24 inch 6.30 cu. ft. Trenching Bucket
30 inch 8.00 cu. ft. Trenching Bucket
36 inch 8.00 cu. ft. Trenching Bucket
36 inch 6.64 cu. ft. Drainage BucketPre-drilled for bolt on cutting edge
ACCUMULATOR CHARGE KIT
Required for all KXB560Q installations
Quick Coupler
DESCRIPTION
QUICK ATTACH BUCKETS
CANOPY WORK LIGHT KIT
TRAVEL ALARM KIT
BREAKER MOUNT BRACKETRequired for all KXB560Q installations
BREAKER HOSE KIT
Bucket Hangers
Bolt On Cutting Edge for K7924 48” Drainage Bucket
12 inch 3.00 cu. ft. Trenching Bucket
18 inch 4.50 cu. ft. Trenching Bucket
48 inch 8.50 cu. ft. Drainage Bucket
36 inch 3.48 cu. ft. Cemetery Bucket
K7915 Quick Coupler required.
Pre-drilled for bolt on cutting edge
Includes manual, one moil point and one chisel point. Requires K7931 Breaker Mount Bracket and K7941 Hose Kit.
The K7918 bucket has four teeth. The K7937 thumb tines contact the end of the teeth and do not mesh between the teeth.
Emits an audible signal when traveling forward or reverse.
Includes two mounting pins, 1 locking pin and hardware.
Set of two ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
HYDRAULIC THUMB KIT
Bolt On Cutting Edge for K7922 36” Drainage Bucket
FROST RIPPER
HYDRAULIC BREAKER
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-58
KUBOTAK Series KX057-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3K7938 1298 $5,150.00
PART 4
K7933 250 $1,550.00
K7934 390 $6,600.00
K7479 4 $280.00
K9946 4 $124.00
K7942A 6 $248.00
V4218A 3 $176.00
As required in some states for OSHA compliance.
The K7934 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, air conditioner, heater, or defroster. Refer to illustrated parts list to order these components.
ATTACHMENTS (Cont.)
Cab pre-wired with switch. A new bracket must be created for the installation. See installation instructions.
Steel Crawler Kit
RADIO OPTION
one rear mirror, and attaching hardware
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
RETRACTABLE SEAT BELT OPTION (3”)
REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I) CANOPY
STROBE LIGHT KIT
DESCRIPTION
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
Converts tracks from rubber to steel
ROPS / OPG (Top Guard, Level I)
Cab Mirror KitIncludes two side mirrors, one for each side,
ALLIED ATTACHMENT CONTACTS
DESCRIPTION CONTACT:
Earth Auger Model 975, 1475, 1975
McMillen 503 Gay Street Delhi, IA 52223 Tel: (800) 922-2981, Fax (319) 922-2700 Website: www.paladinbrands.com
Vibratory Compactor Model 500B, 1000B
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: hppt://www.AlliedCP.com
Flail Mower Model 30EX
Rockhound Attachments PO Box 220 Hughson, CA 95326 Tel: (800) 426-5615, Fax (360) 230-2322 Website: www.rockhound.com
Available from Parts 70000-73274 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-59
KUBOTA
This page intentionally left blank.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-60
KUBOTAK Series KX080-4
KX080-4 ExcavatorTight Tail Swing Utility Class Excavator
FEATURES ENGINEEco Plus System V3307 Kubota DI CRS Turbo Tier 4 Diesel Engine Auto Idler 4 Cylinder, 4 Cycle Rubber Or Steel Track Models 67.3 Net HP @ 2000 rpm Air Conditioned ROPS/OPG (Top Guard, Level I) Cab Cloth Suspension Seat OPERATIONAL DIMENSIONS Kubota 3 Hydraulic Pump Load Sensing System Max Digging Depth 15’ 1” 1 Gear, 2 Variable Displacement Pumps Max Digging Radius @ Ground Level 23’ 6.3” All Controls Hydraulic Pilot Controls Max Vertical Digging Depth 12’ 7.6”Two Operating Pattern Selection System Max Dumping Height 17’ 2.7” Accumulator Standard Front Dozer Blade w/ Float DOZER BLADE DIMENSIONS Optional Float Angle Blade w/ Bolt-on Cutting Edge Width 86.6” 360 Degree Full Rotation Height 19.7” 70 Degree Left, 60 Degree Right Boom Swing Lift Above Ground 19.7” 17.6 gpm Adjustable Auxiliary Hydraulics Port 1 Drop Below Ground 19.7” 26.4 gpm Adjustable Auxiliary Hydraulics Port 2 Thumb Bracket and Relief Valves PERFORMANCE Five Second Quick Preheat System Digging Force @ Bucket (K7427) 14,660 lbs.Key Switch Stop System Digging Force @ Dipper Arm 8,554 lbs. Half Pitch Rubber Tracks Travel Speed (Low) 1.7 mph Self-Bleed Fuel System Travel Speed (High) 3.1 mph Auto-Downshift Two Speed Travel System Climbing Ability 36% / 20° Swivel Negative Brake Lift Capacity 6,500 lbs. Travel Negative Brake Over Front Third Line Blade Grounded 4.0 Ft. Load Point Height 12.0 Ft. Load Radius BASIC UNITS KX080-4R3, Rubber Tracks, Air Conditioned DIMENSIONS AND OPERATING WEIGHT ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, KX080-4R3, Rubber Tracks, Air Conditioned ROPS/OPG Dipper Arm, Counter weight (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, KX080-4R3A, Rubber Tracks, Air Conditioned Counter weight ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Overall Length 21’ 1.9” Blade, Dipper Arm, Counter weight Overall Width 7’ 2.6” KX080-4S3, Steel Tracks, Air Conditioned Overall Height 8’ 4” ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Operating Weight* 18,280 lbs. Dipper Arm, Counter weight Ground Clearance 15.4” KX080-4S3A, Steel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer KX080-4S3, Steel Tracks, Air Conditioned ROPS/OPG Blade, Dipper Arm, Counter weight (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm,KX080-4W3, 24” Wide Steel Tracks, Air Conditioned Counter weight ROPS/OPG (Top Guard, Level I) Cab, Wide Dozer Overall Length 21’ 1.9” Blade, Dipper Arm, Counter weight Overall Width 7’ 2.6” Overall Height 8’ 4” Operating Weight* 18,390 lbs. Ground Clearance 15.4” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-61
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
19,140 $112,300.00 With:
K7414A 539 $2,660.00 $114,960.00
KX080-4S3 Excavator Basic Unit 18,390 $107,000.00
K7402 140 $1,560.00 K7434A 527 $2,610.00 K7405 370 $4,083.00
$115,253.00
Counterweight
QUICK COUPLER
Dipper arm
36” 12.1 cu. ft. Pin-on TRENCHING BUCKET
36” 12.1 cu. ft. TRENCHING BUCKET
ATTACHMENTS:
Steel Tracks (450 mm, 17.7”)
Excavator Basic UnitRubber Tracks
Angle Dozer BladeAir Conditioned ROPS/OPG (Top Guard, Level I) Cab
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab
Dipper armCounterweight
KX080-4R3A
HYDRAULIC THUMB
Dozer Blade
STANDARD UNIT KX080-4R3A COMPLETE ORDER AND PRICE
STANDARD UNIT KX080-4S3 COMPLETE ORDER AND PRICE
With:
ATTACHMENTS:
DESCRIPTION
BASIC UNIT:
BASIC UNIT:
HOW TO SELECT A KX080-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX080-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX080-4R3A and get: Base model, rubber tracks, air conditioned ROPS/OPG (Top Guard, Level I) cab, angle dozer blade, dipper arm, and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-62
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1KX080-4R3 18,280 $107,000.00
With:
KX080-4R3A 19,140 $112,300.00
With:
KX080-4S3 18,390 $107,000.00 With:
KX080-4S3A 19,250 $112,300.00 With:
KX080-4W3 18,670 $110,700.00 With:
PART 2 BUCKETS
K7416 405 $1,674.00
K7417 460 $2,150.00
K7418 505 $2,387.00
K7419 539 $2,660.00
K7436 565 $2,474.00
K7437 615 $2,586.00
K7438 665 $2,656.00
K7402 140 $1,560.00
K7407 139 $429.00
DESCRIPTION
EXCAVATOR BASIC UNIT
Steel Tracks (450 mm, 17.7”), EXCAVATOR BASIC UNIT
EXCAVATOR BASIC UNIT
MODEL KX080-4 BASIC UNITS
30 inch 10.8 cu. ft. TRENCHING BUCKET
36 inch 12.1 cu. ft. TRENCHING BUCKET
48 inch 10.8 cu. ft. GRADING BUCKET
Wide Steel Tracks (600 mm, 24”),
60 inch 13.5 cu. ft. GRADING BUCKET
QUICK ATTACH BUCKETS
QUICK COUPLER
EXCAVATOR BASIC UNIT
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight
Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, 92.5” Wide Dozer Blade, Dipper Arm, Counterweight
Includes two mounting pins, 1 locking pin, and
54 inch 12.2 cu. ft. GRADING BUCKET
contour required.
hardware.
PIN-ON BUCKETS (Order Attaching Pins from Parts)
BUCKET HANGERS
coupler style. Modification to match bucket
18 inch 6.5 cu. ft. TRENCHING BUCKET
Set of two ear blanks. Converts buckets to quick
24 inch 9.4 cu. ft. TRENCHING BUCKET
Steel Tracks (450 mm, 17.7”), EXCAVATOR BASIC UNIT
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-63
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7426 393 $1,804.00
K7427 448 $2,148.00
K7428 493 $2,336.00
K7429 527 $2,610.00
K7441 553 $2,418.00
K7442 603 $2,530.00
K7444 850 $7,456.00
K7443 652 $2,626.00
K7448 500 $2,227.00
K7451 79 $162.00
K7452 89 $185.00
K7453 109 $202.00
PART 3
K7405 370 $4,083.00
KXB600F 875 $13,500.00
KXB860Q 1,110 $16,000.00
K7477A 16 $787.00
K7475 175 $1,372.00
K7476 160 $1,338.00
K7993 95 $1,338.00
BOLT-ON CUTTING EDGE
K9857 Additional Weight Kit required with K7405 Thumb applications
48 inch 10.8 cu. ft. GRADING BUCKET
36 inch 12.1 cu. ft. TRENCHING BUCKET
30 inch 10.8 cu. ft. TRENCHING BUCKET
K9857 Additional Weight Kit required with K7405 Thumb applications
DESCRIPTION
54 inch 9.6 cu. ft. TILT GRADING BUCKETIncludes hoses and fittings. Tilts 45° each direction
BREAKER MOUNT BRACKET
Includes manual, one moil point and one chisel point. Requires a K7477A hose kit, and a K7475 or K7476 mount bracket
Includes manual, one moil point and one chisel point. Requires a K7477A hose kit, and a K7993 mount bracket
HYDRAULIC BREAKER, 1,200 ft. lbs. rated
HYDRAULIC BREAKER BRACKET
configuration
Required for all KXB600F and KXB860Q installations
HYDRAULIC BREAKER BRACKET
K7402 quick coupler required
For K7438, and K7443 60” grading bucketsBOLT-ON CUTTING EDGE
For K7436 and K7441 48” grading buckets
54 inch 12.2 cu. ft. GRADING BUCKET
60 inch GRADING BLADE
K9857 Additional Weight Kit required with K7405 Thumb applications
For K7437, K7442, and K7444 54” grading buckets
60 inch 13.5 cu. ft. GRADING BUCKET
18 inch 6.5 cu. ft. TRENCHING BUCKET
Required for KXB600F Quick Attach configuration
BOLT-ON CUTTING EDGE
HYDRAULIC BREAKER, 750 ft. lbs. rated
ATTACHMENTS
24 inch 9.4 cu. ft. TRENCHING BUCKET
Required for KXB600F Pin-On
Required for KXB860Q Quick Attach configuration
HYDRAULIC BREAKER HOSE KIT
HYDRAULIC THUMB KIT
QUICK ATTACH BUCKETS (continued)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-64
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K7773 5 $985.00
K7449 300 $3,220.00
K4080 1400 $17,372.00
K4081 380 $610.00
K7462 533 $3,880.00
K7463 555 $3,719.00
K7464 720 $4,252.00
K7465 707 $3,872.00
K7467 315 $1,400.00
K7466 295 $1,346.00
K7468 1015 $6,250.00
K7471 980 $5,670.00
K7472 960 $5,670.00
K7482A 1877 $6,820.00
K7483A 300 $7,405.00
K7446 48 $420.00
K7445 1 $83.00
K7459 440 $1,060.00
REPLACEMENT BLADE KIT FOR K4080 SHREDDER
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
EXCAVATING RAKE, 36”, Pin-on
EXCAVATING RAKE, 36”, Quick Attach
FLAIL BRUSH SHREDDER
Additional Weight Kit
STEEL CRAWLER KIT (600 mm, 23.6”)
DOZER BLADE EXTENSION KITKit consists of left / right blade extensions, two tie down labels, and an Installation Manual. The extensions are welded to the dozer blade to match the width of the K7483A Steel Track Conversion Kit.
TRAVEL ALARM KIT
EXCAVATING RAKE, 48”, Pin-on
EXCAVATING RAKE, 48”, Quick Attach
FROST RIPPER, 24”, Pin-On
FROST RIPPER, 24”, Quick Attach
SOLID TINE GRAPPLE, 36”, Pin-on
COMPACTION WHEEL, 18”, Pin-On
COMPACTION WHEEL, 18”, Quick Attach
STEEL CRAWLER KIT (450 mm, 17.7”)Convert tracks from rubber to steel
Bolts on to the existing counter weight. Increases minimum tail turning radius from 4’ 9.5” to 4’ 11”
Emits an audible signal when traveling forward or reverse.
Brush Guard Kit
Convert tracks from rubber to steel. The K7446 weld-on dozer blade extensions are recommended for theK7483A. Not authorized for angle blade models
ATTACHMENTS (Cont.)
ACCUMULATOR CHARGE KIT
Quick coupler mount, integrated thumb saddle, hoses, hydraulic quick couplers, safety chain debris deflector guards, manual
DESCRIPTION
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-65
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4K7469 463 $8,850.00
V4218A 3 $176.00
K7804 6 $489.00
K9943A 3 $78.00
E9299A 4 $310.00 AM/FM Radio with MP3 Port and 7-Channel Weather Band. The antenna, two speakers and harness come already preinstalled in the cab
Cab pre-wired with switch. A new bracket must be created for the installation. See installation instructions.
RETRACTABLE SEAT BELT OPTION (3”)
ROPS / OPG (Top Guard, Level I)
As required in some states for OSHA compliance.
RADIO OPTION
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
STROBE LIGHT KIT
The K7469 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, air conditioner, heater, or defroster. Refer to illustrated parts list to order these components.
ARM REST KITFor excavators serial number 10000 and below. Standard equipment on excavators serial number 10001 and above.
DESCRIPTION
ALLIED ATTACHMENT CONTACTS
DESCRIPTION CONTACT:
Earth Auger Model 1975
McMillen 503 Gay Street Delhi, IA 52223 (800) 922-2981 Fax (319) 922-2700
Vibratory Compactor Model 1000B
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: http://www.AlliedCP.com
Rotary Grapple Model PC025B with RGP-252 Rotator Not authorized for use with hydraulic thumbs
Eastern & Central USA Tel: (503 444-2103 Fax: (603) 444-0327 sales@rotobecusa.com www.rotobec.com
Western USA Tel: (250) 765-1161 Fax: (250) 765-0035 rotobecwestsales@shaw.ca www.rotobec.com
Available from Parts
70000-73274 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-66
KUBOTAK Series Replacement Engines
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
D722E3BH 220 $3,150.00
D722E3BH3 220 $3,150.00
D1105E2BH1 200 $3,867.00 D1105E3BH7 200 $3,983.00
D902EBH 200 $2,570.00 D902E2BH1 200 $3,449.00 D902E3BH 200 $3,553.00
D902E3BH3 TBA TBAD902E4BH2 200 $3,565.00
D782E2U15 200 $3,615.00 D782E3BH4 200 $3,431.00 D902E3BH2 200 $3,553.00
D1105E2BH6 200 $3,971.00
D1105E3U25 240 $3,983.00
V1505E2BH3 300 $4,255.00 V1505E3BH 300 $4,472.00 V1505E4BH1 300 $4,610.00
V1505E2BH7 300 $4,494.00 D1503M2BH2 441 $4,598.00 D1703E3BH2 441 $5,164.00 D1703E3BH1 431 $5,200.00
D1703T4BU1 440 $4,870.00 D1703T4BU2 440 $4,870.00
V2203E2BH4 300 $4,807.00 V2203M2BH2 300 $5,225.00 V2203M2B3N 300 $5,003.00 V2203E3BH2 440 $5,200.00
D1803E4BH1 610 $9,380.00 D1803E4BH2 610 $9,380.00
V2203E3BH3 440 $5,200.00 V2203E3BH1 440 $5,200.00
V2203M2BH2 512 $5,225.00 V2403E3BH1 440 $5,408.00 V2403E3BH2 440 $5,408.00
V2607DIE3B 610 $6,700.00 Interim Tier 4
Replacement engine for U15 Tier 4
Replacement engine for KX41-3 Tier 4
Replacement engine for U15 Tier 2
Replacement engine for KX91-2/S Tier 2
Replacement engine for U17 Tier 4
Replacement engine for K008-3 Tier 4
DESCRIPTION
Replacement engine for KX71-3S4 Tier 4
Replacement engine for KX121-3S with AC Tier 2Replacement engine for KX121-3S AC Interim Tier 4
Replacement engine for KX040-4 cab models Tier 4
Replacement engine for U45-3S AC Interim Tier 4
Replacement engine for KX161-3 Tier 2
Replacement engine for U45S-3S Canopy Interim Tier 4
Replacement engine for U35S2 Interim Tier 4
Replacement engine for KX121-2/S Tier 2Replacement engine for KX121-3S Tier 2
Replacement engine for KX161-3S AC Interim Tier 4Replacement engine for KX161-3S Canopy Interim Tier 4
Replacement engine for U35-4 canopy models Tier 4Replacement engine for U35-4 cab models Tier 4
Replacement engine for KX040-4 canopy models Tier 4
Replacement engine for K008 Tier 4
Replacement engine for KX91-3/U35 Tier 2Replacement engine for KX91-3S2
Replacement engine for KX41-3 Tier 2
Replacement engine for U25-3S Tier 4
Replacement engine for KX61-2/S Tier 2
Replacement engine for KX41-2/SV Tier 2Replacement engine for KX41-2 Tier 4
Replacement engine for KX41-3
Replacement engine for KX71-3 Tier 2
Replacement engine for KX057-4 & U55 canopy models
Replacement engine for KX71-3S Interim Tier 4
Replacement engine for KX018-4 Tier 4 S/N above #40442Replacement engine for KX018-4 Tier 4 S/N 40441 and below
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-67
KUBOTAK Series Replacement Engines
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
V2607DIE3H 610 $6,700.00 Interim Tier 4
V2607E4BH1 610 $11,400.00 models Tier 4
V2607E4BH2 610 $11,400.00 models Tier 4
V38DIE2BH 613 $7,505.00 V3307DT3BH 610 $8,500.00 V3307TE4BH 610 $12,980.00
Replacement engine for KX080-3 Tier 3
Replacement engine for KX057-4 & U55-4 cab
Replacement engine for KX080-4 Tier 4
Replacement engine for KX057-4 & U55-4 canopy
DESCRIPTION
Replacement engine for KX057-4 & U55 cab models
Replacement engine for KX080-3 Tier 2
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-68
Recommended