SEC Training July 2011

•by CBackup Database and ops on CPU disk then transfer it to your PC hard Disk•Create empty database•Restore ops•Create boards in shelf 0:

•eUA 32 •eZ32•NDDI2•Use command ( config ) to check the status of the boards

•Create users:•User 3n00 / 4019 /•User 3n01 / Analog•User 3n02 / 4038•User 3n03 /Digital•Use command (listerm) to check every board terminals.•Use command ( termstat ) to check every user status.

•Create Hunt Group: Number (80) /Name (Workshop) / cyclic / contains (3n00 and 3n01 )•Put the users (3n01 and 3n03) in Pickup Group named Sales.•Configure Manager / Assistant :

•Manager is 3n00•Assistant is 3n03•The manager has a key for screening all directory numbers•The Assistant has a key for absence.•The Assistant has a key for manager mail.

•Manage Connection COS to forbid 3n01 from calling others.

Alcatel-Lucent OmniPCX Enterprise

• Manage Phone features COS to forbid 3n03 from Immediate forward and Do Not Disturb.

• External lines:– Create Trunk Group 1– Assign 2 trunks to Trunk Group 1– Prefix 9 is used for Trunk Group 1– Manage the Discriminator rules– Manage the Public COS– User 3n00 is authorized to call all external numbers (Local, National , and International )– User 3n01 is authorized to call (Local, and National)– User 3n02 is authorized to call (Local) only.– User 3n03 cannot call any external number.– Use command ( list_faisc) to list the trunk groups– Use command (trkstat) to monitor in real time the trunks status.

• Manage Incoming call Distribution to arrive on 3n03 then 3n00 and the overflow on 3n01 (entity 0)

• Create an attendant group with A0 as physical No.• Create attendant set B0 and B1 in group A0• Manage attendant group distribution, and attendant sets Call distribution• Create attendant call prefix and attendant group call prefix and individual attendant

set call prefixes and note the differences.