View
39
Download
1
Category
Preview:
Citation preview
The tubing is normally used to extract liquids and gas from oil/gas-bearing formations, inject water and compressed air (gas) into oil and gas wells, and perform various types of well reconditioning and workover operations. These are pipes threaded at both ends and complete with a coupling screwed on one end. The tubing is manufactured with plain or externally upset ends and box couplings, and the following options or their combinations can be available:• Standard tubing• High-strength tubing• Corrosion-resistant tubing (steel class 1, 3, or Cr 5%)
• Cold-resistant tubing• Higher operational reliability tubing• Tubing with enhanced passage properties• Type F-3,2 thread-connection tubing• Premium gas-tight threaded connections for tubing ChT-VT and ChT-VTm1 (modification for make-up with NEW VAM and VAGT)• Special-purpose tubingThe tubing is manufactured on high-technology equipment at the PNTZ Oil Pipe Rolling Plant Finish Center. All seamless tubing production phases fully comply with ISO 9001 and API Specification Q1, API Spec 5CT, GOST R 53366, GOST 633-80.
SEAMLESS TUBING
TU 1327-343-00186619-2011 CORROSION- AND COLD-RESISTANT STEEL SEAMLESS TUBING FOR GAS-CONDENSATE AND OIL FIELDS, INCLUDING TUBING WITH PREMIUM CONNECTIONS
TUBING SCHEDULE
GOST R 53366-2009 TUBING
Standard End typeTube size
GradeDiameter, mm Wall thickness, mm Length, m
GOST 633-80
Plain or externally upset ends 60–114 4.2–8.6 9.50–11.87
Д, К, Е, Л, М, Р (D, K, E, L, M, R),
J55,K 72,
N80 type 1,N80 type Q, L80 type 1,
R95,C90 type 1,Т95 type 1,
P110
GOST R 53366-2009
API 5CT PSL1
TU 14-159-340-2016
TU 1327-343-00186619-2011
TU 1327-371-00186619-2014
TU 14-159-335-2010
Tube typeTube size
Grade Threaded connection typeDiameter, mm Wall thickness, mm Length, m
Plain or externally upset ends 60 5.0
Make A: 9.50–10.5
Make B: Class 1: 7.0–8.5
Class 2: 8.5–10.0
Д, К, Е, Л, М, Р (D, K, E, L, M, R)
НКТ (NKT), rounded triangular thread
НКТВ (NKTV), tubes with rounded triangular thread
and externally upset ends
НКМ (NKM), high-reliability pressure-tight trapezoidal
thread with "metal-to-metal" seal assembly
Plain or externally upset ends tubing, plain high-reliability pressure-tight tubing
735.5
7.0
896.5
8.0
Plain, high-reliability pressure tight plain tubing 114 7.0
Tube typeTube size
Grade Threaded connection typeDiameter, mm Wall thickness, mm Length, m
Plain or externally upset ends 60.324.24
R2 8.53–10.36
J55, K72,
N80 type 1, N80 type Q, L80 type 1,
R95, C90 type 1, T95 type 1,
Р110 A.9 SR16
НКТ (NKT), NU, НКТВ (NKTV), EU, rounded triangular thread
НКМ (NKM), high-reliability pressure-tight trapezoidal
thread with "metal-to-metal" seal assembly
4.835.00
Plain or externally upset ends tubing, plain high-reliability pressure-tight tubing
73.025.517.017.82
88.90
5.496.457.348.00
Plain, high-reliability pressure tight plain tubing 101.60
5.746.506.65
114.306.887.00
API SPEC 5CT TUBING
TU 14-159-340-2016 STEEL SEAMLESS TUBING AND TUBE COUPLINGS WITH GAS-TIGHT PREMIUM CONNECTIONS CHT-VT, CHT-VTM1
TU 1327-343-00186619-2011 CORROSION- AND COLD-RESISTANT STEEL SEAMLESS TUBING FOR GAS-CONDENSATE AND OIL FIELDS, INCLUDING TUBING WITH PREMIUM THREAT CONNECTIONS
TU 1327-371-00186619-2014 STEEL SEAMLESS TUBING AND TUBE COUPLINGS WITH TYPE F THREADED CONNECTION
Tube type
Tube size
Grade Threaded connection typeDiameter Wall thickness,
mmLength, m
inch mm
With externally upset ends
2 3/8 60.32 4.83
R2 8.53–10.36
J55,N80 type 1,N80 type Q, L80 type 1,
R95,C90 type 1,Т95 type 1,
P110 A.10 SR16
NU — НКТ (NKT), plain ends, rounded triangular thread
EU — НКТ (NKT), externally upset ends, rounded triangular thread
2 7/8 73.025.517.017.82
3 1/2 88.9 6.45
Plain
2 3/8 60.324.244.83
2 7/8 73.025.517.017.82
3 1/2 88.95.496.457.34
4 1/2 114.3 6.88
Tube typeTube size
GradeThreaded connection type
Diameter, mm Wall thickness, mm Length, m ChT-VT ChT-VTm1
Plain tubing with gas-tight premium connections ChT-VT/ChT-VTm1
(compatible with VAGT and NewVAM)
60 (60.3) 5.0 (4.83)
9.5–10.5
Д, К, Е, Л, М, Р(D, K, E, L, M, R),
H40,J55,K55,
N80 тип Q,L80 тип 1,
R95,90 тип 1,
P110
73 (73.02)5.5 (5.51)
7.0 (7.01)
89 (88.9)5.5 (5.49)
6.5 (6.45)
114 (114.3)7.0 (6.88)
8.6 (8.56)
Tube typeTube size
Grade
Threaded connection type
НКМ (NKM), НКТ
(NKT), NU
НКТВ (NKTV), НКТВ-У (NKTV-EXTRA), EU, EU-У (EU-EXTRA)
Premium class
Diameter, mm Wall thickness, mm Length, m ChT-VT ChT-VTm1
Plain or externally upset ends;plain, high-reliability pressure-tight tubing;
plain, gas-tight tubing with premium connections ChT-VT/ChT-VTm1
(compatible with VAGT and NewVAM)
60 (60.32) 5.0 (4.83)
9.5–10.5
К, Е, Л(K, E, L),
N80 type 1,N80 type Q,L80 type 1,
C90Т95
73 (73.02)5.5 (5.51)
7.0 (7.01)
89 (88.90)5.5 (5.49)
6.5 (6.45)
114 (114.30)7.0 (6.88)
8.6 (8.56)
Tube typeTube size
Grade Threaded connection typeDiameter, mm Wall thickness, mm Length, m
Plain
735.5
9.5–10.5 Д, К, Е, Л, М, Р (D, K, E, L, M, R),
F-3,2, rounded triangular thread with 3.175 mm pitch, w/o forced run-out as per
TU 0071-001-20970456-2010
7.0
896.5
8.0
The casing pipes are used to control wellbore walls during well construction and operation. These are pipes threaded at both ends and complete with a coupling screwed on one end.The casing tubes are seamless tubes complete with couplings, and the following options or their combinations are available:• Standard• High-strength tubing• Corrosion-resistant tubing (steel class 1 or Cr 3%)
• Cold-resistant tubing• Higher operational reliability tubing• Premium gas-tight threaded connections for casing ChT-VСThe casing is manufactured on PNTZ and ChTPZ high-technology equipments. All seamless casing manufacture phases fully comply with ISO 9001 and API Specification Q1, API Spec 5CT, GOST R 53366, GOST 632-80. 100% of casing and tube couplings are subject to nondestructive control.
CASING TUBE SCHEDULE
SEAMLESS CASING PIPES
Standard End typeTube size
GradeDiameter, mm Wall thickness, mm Length, m
GOST 632-80
Plain 102–426 5.2–14.8 9.5–11.87
Д, К, Е, Л, М, Р(D, K, E, L, M, R),
J55,K 55,M65,
N80 type 1,N80 type Q,L80 type 1,
R95,C90 type 1,Т95 type 1,
P110
GOST R 53366-2009
API 5CT PSL1
TU 14-159-353
TU 14-159-344-2016
TU 1321-344-00186619-2012
TU-14-3-1575-88
TU 1321-357-00186619-2013
GOST R 53366-2009 STEEL SEAMLESS CASING
Tube typeTube size
Grade Threaded connection typeDiameter, mm Wall thickness, mm Length, m
Steel, seamless casing
114.30
5.21
R2 8.53–10.36 R3 10.36–11.87
J55,K55,
N80 type 1,N80 type Q,L80 type 1,
R95,C90 type 1,Т95 type 1,
P110 A.9 SR16
ОТТМ, trapezoidal thread BC, buttress thread
ОТТГ (OTTG), high-reliability pressure-tight trapezoidal thread
with "metal-to-metal" seal assembly SC, short round thread LC, long round thread
5.69
6.35
7.37
8.56
10.20
139.70
6.20
6.98
7.72
9.17
10.54
146.05
7.00
7.70
8.50
9.50
10.70
168.28
7.32
8.00
8.94
10.59
12.06
177.80
8.05
9.19
10.36
GOST 632-80 CASING AND TUBE COUPLINGS, TU-14-3Р-29-2007 STEEL SEAMLESS CASING, ELECTRIC-WELDED CASING, AND TUBE COUPLINGS WITH HIGHER OPERATIONAL RELIABILITY WITH BUTTRESS TYPE THREADED CONNECTION, TU-14-3-1575-88 CASING 351 MM, 377 MM, AND 426 MM IN DIAMETER AND TUBE COUPLINGS
Tube typeTube size
Grade Threaded connection typeDiameter, mm Wall thick-
ness, mm Length, m
Steel, seamless casing
114 (114.3)
6.4
9.50–11.87
Д, К, Е, Л, М, Р (D, K, E, L, M, R)
ОТТМ, trapezoidal thread
BC, buttress thread
ОТТГ (OTTG), high-reliability pressure-tight trapezoidal thread with "metal-to-metal" seal
assembly
SC, short round thread
LC, long round thread
7.4
8.6
10.2
140 (139.7)
7.0
7.7
9.2
10.5
146 (146.1)
7.0
7.7
9.2
10.5
168 (168.3)
7.3
Д, К, Е, Л, М(D, K, E, L, M)
8.0
8.9
10.6
12.1
178 (177.8)
8.1
9.2
10.4
11.5
245 (244.5)
7.9
Д, К, Е(D, K, E) ОТТМ, trapezoidal thread
8.9
10.0
299 (298.5)
9.5
11.0
12.4
14.8
324 (323.9)
9.5
11.0
12.4
14.0
351 (351.0)
10.0
Д (D) SC, short round thread
11.0
12.0
377 (377.0)
10.0
11.0
12.0
426 (426.1)
10.0
11.0
12.0
Tube typeTube size
Grade Threaded connection typeDiameter, mm Wall thickness,
mm Length, m
Steel, seamless casing
114 (114.30) 7.4 (7.37)
9.50–11.87
Д, К, Е, Л, М, Р(D, K, E, L, M, R)
К55,N80 type Q,L80 type 1,
R95,P110 A.10 SR16
Gas-tight premium threads ChT-VC and ChT-HT (high-torque option)
140 (139.70)
7.7 (7.72)
9.2 (9.17)
10.5 (10.54)
12.1 (12.09)
146 (146.10)
7.7
8.5
9.5
10.7
168 (168.28)
8.9 (8.94)
10.6 (10.59)
12.1 (12.06)
13.34
178 (177.80)
9.2 (9.19)
10.4 (10.36)
11.5 (11.51)
12.7 (12.65)
TU 14-159-344-2016 STEEL SEAMLESS CASING WITH PREMIUM CONNECTIONS
API SPEC 5CT CASING
Tube type
Tube size
Grade Threaded connection typeDiameter, mm Wall thickness,
mmLength, m
inch mm
Steel, seamless casing
4 1/2 114.30
5.21
R2 8.53–10.36
R3 10.36–11.87
J55,К55,
N80 type 1,N80 type Q,L80 type 1,
R95,C90 type 1,Т95 type 1,
P110 A.10 SR16
BC, buttress thread
SC, short round thread
LC, long round thread
5.69
6.35
7.37
8.56
5 1/2 139.70
6.20
6.98
7.72
9.17
10.54
6 5/8 168.28
7.32
8.94
10.59
12.06
7 177.80
8.05
9.19
10.36
TU 1321-357-00186619-2013 COLD-RESISTANT STEEL SEAMLESS CASING TUBES AND TUBE COUPLINGS
Tube type
Tube size
Threaded connection type
Triangular thread
ОТТМ ОТТГ (OTTG)
Diameter, mm Wall thickness, mm Length, m Short Extended
Steel, seamless casing
114
6.4
9.5-11.87
Д (D) ДЕЛМ (DELM) ДЕЛМ (DELM)
7.4 ДЕЛМ (DELM) ДЕЛМ (DELM)
8.6 ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
10.2 ЛМ (LM) ЛМ (LM) ЛМ (LM)
140
7.0 Д (D) ДЕЛМ (DELM) ДЕЛМ (DELM)
7.7 Д (D) ДЕЛМ (DELM) ДЕЛМ (DELM)
9.2 ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
10.5 ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
146
7.0 Д (D) ДЕЛМ (DELM) Д (D)
7.7 Д (D) ДЕЛМ (DELM) ДЕЛМ (DELM)
8.5 ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
9.5 ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
10.7 Д (D) ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
168
7.3 Д (D) ДЕ (DE) ДЕ (DE)
8.0 ДЕ (DE) ДЕЛ (DEL) ДЕЛ (DEL)
8.9 Д (D) ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
10.6 ДЕЛ (DEL) ДЕЛ (DEL) ДЕЛ (DEL)
12.1 ДЕЛ (DEL) ДЕЛ (DEL) ДЕЛ (DEL)
178
8.1 Д (D) ДЕЛ (DEL) ДЕЛ (DEL)
9.2 Д (D) ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
10.4 ДЕЛМ (DELM) ДЕЛМ (DELM) ДЕЛМ (DELM)
11.5 ДЕЛ (DEL) ДЕЛ (DEL) ДЕЛ (DEL)
Tube typeTube size
Grade Threaded connection typeDiameter, mm Wall thickness, mm Length, m
Steel, seamless casing 102 (101.6) 6.5 9.50–11.87 Е, Л (E, L) ОТТМ, trapezoidal thread
TU 14-159-353-2012 SMALL DIAMETER STEEL SEAMLESS CASING AND TUBE COUPLINGS
Recommended