View
1
Download
0
Category
Preview:
Citation preview
287 288
-Headed type- ~
D Catalog No. Hole shape Hole shape Hole shape Hole shape Hole shape
Equivalent to SKD11
60~63 HRC
D6~56
SRS-MHD SRS-HDD SRS-HDR SRS-HDE SRS-HDG
D10~56
SRS-MHDS SRS-HDDS SRS-HDRS SRS-HDES SRS-HDGS
P-0.4≧1.5(P dimension straight section 1.5 mm or longer) P≧W K= P²+W²
P≧W 0.15≦R<W2
P-2R≧1.5(P dimension straight section 1.5 mm or longer) K=(P-2R)²+(W-2R)²+2R
P>W P>W P²-W²≧1.5 (P dimension straight section 1.5 mm or longer)
-Straight type- ~
D Catalog No. Hole shape Hole shape Hole shape Hole shape Hole shape
Equivalent to SKD11
60~63 HRC
D6~56 SRS-MSD
D8~56
SRS-SDD SRS-SDR SRS-SDE SRS-SDG
D10~56
SRS-MSDS SRS-SDDS SRS-SDRS SRS-SDES SRS-SDGS
P-0.4≧1.5(P dimension straight section 1.5 mm or longer) P≧W K= P²+W²
P≧W 0.15≦R<W2
P-2R≧1.5(P dimension straight section 1.5 mm or longer) K= (P-2R)²+(W-2R)²+2R
P>W P>W P²-W²≧1.5 (P dimension straight section 1.5 mm or longer)
√ √√
√ √√
Alteration Code * +,-. Rs./Code
Alte
ratio
ns to
sha
ped
hole
PC WC
Shaped hole diameter change min. : P
W>PCWC≧
P・Wmin.2 ≧1.00
0.01mm increments For * only, if PC is 1.00~1.99, b=4. 126
max. : PW<
PCWC≦P・Kmax.+0.2
0.01mm increments
BC
Shaped hole depth change Shaped hole depth change 1≦BC<2 0.1 mm increments Cannot be used for L>40.
1261≦BC<Bmax. 1≦BC≦b 0.1 mm increments Cannot be used for L>40.
PKCShaped hole diameter tolerance change P+0.01
0 ⇨+0.0050
Shaped hole diameter tolerance change P・W ±0.01⇨+0.01
0252
Full
leng
th LKCFull length tolerance change L+0.4+0.2⇨
+0.050
�If combined with LKC, L dimension can be selected in 0.01mm increments.
252
LKZFull length tolerance change L+0.4+0.2⇨
+0.010
�If combined with LKZ, L dimension can be selected in 0.01mm increments.
Cannot be used for D>25.378
Head KC
Addition of single key flat to head
Key flat position change1°increments
126Addition of single key flat Cannot be used for D6.
Key flat position change 1°increments
D tolerance Catalog No. 0.1 mm increments L
0.01mm increments 0.005mm incrementsb d* +,-. , MT
(workpiece material thickness)
C (clearance)D m5 n5 Type D min. P max. P・Kmax. P・Wmin. R
6 +0.009 +0.004
+0.013 +0.008
Headed type (Dm5) SRS-MHD
SRS-HDD
SRS-HDR
SRS-HDE
SRS-HDG
Straight type(Dn5)
SRS-MSD
SRS-SDD
SRS-SDR
SRS-SDE
SRS-SDG
(6)
30.0~40.0
1.00~ 3.00 3.00 1.00
0.15≦
R <W - 2(
l o
nly )
MT≧0.15 Select a workpiece
material thickness of 0.15 mm or more.
C≧0.010 Select a clearance of 0.010 mm or more.
3 3.48 +0.012 +0.006
+0.016 +0.010
8 1.00~ 4.00 4.00 1.00 4 4.410 10 2.00~ 6.00 6.00 1.20 6 6.413 +0.015 +0.007
+0.020 +0.012
13 3.00~ 8.00 8.00 1.50
8
8.416 16 5.00~ 10.00 10.00 2.00 10.620 +0.017 +0.008
+0.024 +0.015
20 7.00~ 12.00 12.00 3.00 12.625 25 10.00~ 16.00 16.00 3.00 16.632+0.020 +0.009
+0.028 +0.017
32 15.00~ 20.00 20.00 4.00 20.638 38 19.00~ 26.00 26.00 5.00 26.645 45 25.00~ 35.00 35.00 6.00 36.050 50 33.00~ 40.00 40.00 7.00 41.056 +0.024 +0.011
+0.033 +0.020 56 38.00~ 45.00 45.00 8.00 46.0
10 +0.012 +0.006
+0.016 +0.010 Headed type
(Dm5) SRS-MHDS
SRS-HDDS
SRS-HDRS
SRS-HDES
SRS-HDGS
Straight type(Dn5)
SRS-MSDS
SRS-SDDS
SRS-SDRS
SRS-SDES
SRS-SDGS
10 40.1~80.0 (40.01)
2.00~ 6.00 6.00 1.20 6 6.413 +0.015 +0.007
+0.020 +0.012
13 3.00~ 8.00 8.00 1.50
8
8.416 16
40.1~100.0 (40.01)
5.00~ 10.00 10.00 2.00 10.620 +0.017 +0.008
+0.024 +0.015
20 7.00~ 12.00 12.00 3.00 12.625 25 10.00~ 16.00 16.00 3.00 16.632+0.020 +0.009
+0.028 +0.017
32 15.00~ 20.00 20.00 4.00 20.638 38 19.00~ 26.00 26.00 5.00 26.645 45 25.00~ 35.00 35.00 6.00 36.050 50 33.00~ 40.00 40.00 7.00 41.056 +0.024 +0.011
+0.033 +0.020 56 38.00~ 45.00 45.00 8.00 46.0
D(6)The D=6 straight type is a specification available for shape*(round)only. It is not available for shapes +,-.. L(40.01)When LKC・LKZ is selected, select an L dimension of 40.01 or larger. Effective depth of scrap retention grooves(table below). Perform shaped hole regrinding within the range of(Groove effective depth-1 mm).
Can be used only for workpiece materials with tensile strengths up to 1177 N/mm2(120 kgf/mm2). MT(workpiece material thickness)and C(clearance)are used as data for machining the scrap retention grooves. Specify the shaped hole dimensions(P・W・R)when selecting the button die finishing dimensions.
SCRAP RETENTION BUTTON DIES, CONFIGURABLE FULL LENGTH TYPE
The volume discount rate is also applicable to alteration costs. P.39
L b/a30.0~ 40.0 1/10040.1~100.0 0
L L≦40.0 L≧40.1P1.00~1.99 P2.00~3.99 P4.00~
Effective groove depth
Shaped hole depth B(BC) 3 5 6
L b/a30.0~ 40.0 1/10040.1~100.0 0
OrderCatalog No. - L - P - W - R(, only)- MT - C
SRS-MHD 10 - 35.1 - P5.00 - MT1.5 - C0.105SRS-HDRS 20 - 65 - P8.00 - W8.00 - R0.40 - MT1.5 - C0.105
Dispatch Days11 Price■Volume discount price P.37
Quantity 1~9 10~29 30~99 100~200 For larger orders, ask about prices/delivery.Discount rate Base unit price 5% 10% 15%
Price■Base unit price for headed type ■Base unit price for straight type
D SRS-MHD SRS-HDD・SRS-HDR SRS-HDE・SRS-HDG SRS-MHDS SRS-HDDS・SRS-HDRS
SRS-HDES・SRS-HDGS D SRS-MSD SRS-SDD・SRS-SDR SRS-SDE・SRS-SDG SRS-MSDS SRS-SDDS・SRS-SDRS
SRS-SDES・SRS-SDGS6 1,959 3,805 - - 6 1,928 - - -8 1,827 3,610 - - 8 1,783 3,610 - -10 1,827 3,610 2,413 5,242 10 1,783 3,610 2,413 5,24213 1,808 3,730 2,413 5,588 13 1,758 3,730 2,413 5,58816 1,934 4,171 2,539 6,388 16 1,884 4,171 2,539 6,38820 1,953 4,284 2,539 6,684 20 1,909 4,284 2,539 6,68425 2,388 4,643 3,194 7,403 25 2,281 4,643 3,194 7,40332 2,816 5,027 3,799 8,114 32 2,690 5,027 3,799 8,11438 3,616 5,607 4,870 9,393 38 3,440 5,607 4,870 9,26745 5,809 9,028 7,245 11,794 45 5,588 9,028 7,245 11,79450 6,596 9,815 8,039 12,739 50 6,332 9,815 8,039 12,73956 7,642 10,811 9,255 14,137 56 7,377 10,811 9,255 14,137
Alterations Catalog No. - L - P(PC)- W(WC)- R - MT - C -(BC・HC・TC, etc.)
SRS-MHD 13 - 35 - PC8.02 - MT1.5 - C0.105 - TC4.0
P Bmax.1.00~1.99 2.00~3.99 4.00~
3 5 6
Alteration Code * +,-. Rs./Code
Alte
ratio
ns to
hea
d
WKCAddition of double key flats in parallel Can be combined with KC for shapes +,-.. Cannot be used for D6 straight type.
126 252 for * only
KFC
Double key flats at 0°and a selected angle 1° increments
Double key flats at 0°and a selected angle 1° increments
126 252 for * only Cannot be combined with KC・WKC.
Cannot be used for L(LC)<16 or D>25. Cannot be used for straight types.
Cannot be combined with KC・WKC. Cannot be used for L(LC)<16 or D>25. Cannot be used for straight types.
HCHead diameter change D≦HC<(D+3) 0.1 mm increments
126
TCHead thickness change 2≦TC<5 0.1mm increments(If combined with TKC・TKM, 0.01 mm increments can be selected.) Full length remains as specified.
126
TKC Head thickness tolerance change T +0.30 ⇨ +0.02
0 126
TKM Head thickness tolerance change T+0.30 ⇨ 0
-0.02 126
RCCan be used for headed types only. Head thickness is machined to a tolerance of -0.04~ 0 relative to the retainer surface.
126
Othe
rs
SKCSingle key flat on shank Can be used for headed types only. Can be used for D≧8. Cannot be combined with KC・WKC・KFC. Cannot be used for straight types.
378
Clearance
Punch shaped hole
Die shaped hole
R≦0.2R≦0.2
P0+
0.01
P
K
W
D2
0-0.01
R
K
D m5A
Aφ0.01 A0.02
0.01/12
±0.
01
±0.01
±0.
01P
±0.
01P
±0.
01P
±0.01W ±0.01W ±0.01W
┕┋ ┖┌ ┗┍ ┘┎ ┙┏
R≦0.2
DA
φ0.01 A
n5
+0.
010
P
D 0
0.02 A
K
-0.012
R
K
R≦0.2
-10.01/12
±0.
01P
±0.
01P
±0.
01P
±0.
01P
±0.01W ±0.01W ±0.01W ±0.01W
┕┋ ┖┌ ┗┍ ┘┎ ┙┏
PRODUCTS DATA
P.1229
ab
d
(D+3)
L3
B=2
b5
+0.
2+
0.4
0+
0.3
0-0.2
-0.03-0.01
D
B=2
bd
L
ab
3+
0.2
+0.
4
-0.
03-
0.01
D
PC P
WCW
PC PP
L ┄
90°
270°
180° 0°
90°
270°
180° 0°
B
BC
┄
90°
180° 0°
270°
90°
180° 0°
270°
TC
T
HC
T
-0.0
40
D2-1-0.01
0
┄
Recommended