School of Medicine Multipurpose Room Control System

School of Medicine Multipurpose Room Control System

 1  

To  report  a  problem  with  the  system  please  contact  the  Help  Desk  @  463-­‐7777.  

DVD/VCR    

   Environment    

To  get  started  press  the  touch  panel.  You  can  then  choose  any  of  the  available  sources  (Laptop,  Computer,  DVD/VCR,  etc.)  displayed  on  the  source  selection  bar  by  swiping  left  and  right  and  then  dragging  it  into  the  black  space  below  the  options.  NOTE:  The  touch  panel  is  programmed  to  control  rooms  based  on  the  placement  of  the  room  dividers  between  rooms  104,  105,  and  106.  

Dragging  DVD/VCR  or  Bluray  into  the  black  space  will  enable  it  and  the  master  controls  will  appear  for  the  feature.  Below  is  an  example  of  the  controls  for  the  DVD/VCR  source.  

Press  Environment  to  access  lighting  controls,  shade  controls,  projector  controls,  and  the  projector  screen.  

Depending  on  the  lighting  control  option,  the  shades  may  change  configuration  as  well  to  accommodate  the  chosen  lighting  control.  

 2  

To  report  a  problem  with  the  system  please  contact  the  Help  Desk  @  463-­‐7777.  

Exiting  the  System    

There  are  two  layers  of  shades  –  solar  and  blackout  that  can  be  controlled  through  the  shade  controls  screen.  

Projector  Screen  usage  can  be  controlled  through  this  screen.  

Tap  Exit  and  then  Continue  to  shut  down  the  system.  The  system  will  now  power  off.  

Projector  usage  can  be  controlled  through  this  screen.