Saraj - Komerc d.o.o. business presentation

Preview:

Citation preview

General Information

Company Name: Saraj – Komerc d.o.o.Address: Batuški Lug bb - Industrijska zona bb

70240 Gornji Vakuf – UskopljeActivity: Production of Covers for Fuel Filters, Springs and TubesProperty: 100% privateExisting since: 1983.Number of employees: 262General Manager: Emir Čolić

Organisation structure

Infrastructure

“Saraj-Komerc” has three production sites on two locations. Surface of production sites on location 1 is 9.000 m2, whereas surface of production site on location 2 is 7.500 m2.

Infrastructure

“Saraj-Komerc” has bought “Tvornica Opruga” facility (location 2) for production of springs in 2010. Facility has been rebuilt, and free capacities were allocated for all technologies.

The whole space of this facility is allocated for new projects. Facility includes a new Zn/Ni plating line.

Products and services

“Saraj-Komerc” production range includes Cover assemblies for Fuel Filters, Springs and tubes for Diesel Fuel Pumps and Coolers. The company also provides services of plating and brazing to it’s customers. We have become a supplier recognizible for it’s quality.

Production of covers for fuel

filters

A set of different technologies is used for production of cover assemblies such as:

Stamping CNC machining Tubing Assembly and brazing Plating Tooling production and maintenance

Stamping

There are more than 40 presses, both excenter andhydraulic, ranging from 10 to 200 tons. Presses are placed inboth production locations, and are used for production of lidswhich are then assembled into cover assemblies. Materialsused for stamping are black steel and stainless steel.

CNC machining

There are more than 20 CNC machines whichare used for production of individual partswhich are then assembled into cover assemblies.

Tubing

Tubing involves different processes such as cutting, chamfering, reaming, forming and bending. Variety of different tubes from steel and stainless steel are used in production of cover assemblies but also as final products which are assembled into Diesel Fuel Pumps and Coolers by our customers.

Assembly and Brazing

Individual parts are assembledinto cover assemblies. Assembledparts are then brazed in BrazingOvens. The ovens are allocated topart families, depending on the basematerial used for their production(black steel and stainless steel).

“Saraj-Komerc” has three plating lines. Two platinglines are allocated for Tin plating and Zinc plating,whereas the third plating line is allocated for Zinc-Nickelplating.

Plating

Tooling workshop

Tooling workshop is used forproduction of simple tubing tools,different fixtures and gauges, andmaintenance of existing stampingtools.

Production of springs

“Saraj – Komerc” started it’s business in 1983. with production of springs. Over the time the company developed new customers and wide range of springs. All types of springs are nowadays produced, with a material range of ø 0,2 – 16 mm. Springs are produced from both steel and stainless steel, and using different platings and passivations.

Quality and Ecology

“Saraj-Komerc” has implemented ISO 9001 QMS in December 2002.Certification was conducted by TÜV Bayern München.

Environment Management System according to ISO 14001 wasimplemented in February 2007. Ecological and environmental aspects ofbusiness are highly respected. Personnel is continualy trained about therelevance of environmental standards.

Activities on implementation of ISO/TS 16949 started in 2011.

References

Contacts

Address:Saraj-Komerc d.o.o. Batuški Lug bb - Industrijska zona bbBA - 70240 Gornji Vakuf - Uskoplje

Phones:+387 (0)30 265 836 – General Manager+387 (0)30 265 835 – Technology+387 (0)30 265 837 – Production and control+387 (0)30 265 315 – Fax and accountant

e-mail:ecolic@saraj-komerc.comm.huskic@saraj-komerc.comnermin@saraj-komerc.com