View
2
Download
0
Category
Preview:
Citation preview
Hydraulic Scissor Lift
Extended Height – 32’
38’ Rad Center with Matsing 12.6 Antenna
Dual Hydraulically Actuated Lifting Cylinders
Velocity Fuses for Rapid Fluid Loss Control
5-Stage Scissor Assembly with Guying Eyelets
Multi-Port Coax Bulkhead Per Design
Powder Coated for Corrosion Resistance
Stainless Steel Hardware for Corrosion Protection
Hydraulic Reservoir and Control System
Hydro-Safe®, Bio-degradable Vegetable Based Hydraulic Fluid
Includes Rotating Mounting Frame for Matsing® 12.6 Antenna
Pneumatic Masts:
45’ 800-lb. Payload Capacity
60’ 530-lb. Payload Capacity
59’ 1,200-lb. Payload Capacity
Guy Kit & Protective Weather Cover Included
Generators:
10 kW 1-Phase, 3-Wire, 120/240 Volt
20 kW 1-Phase, 3-Wire, 120/240 Volt
36 kW 1-Phase, 3 Wire, 120/240 Volt
Block Heater and Battery Charger Included
Optional Automatic Transfer Switch
UL® Listed Equipment Cabinet:
As Needed For Project Requirements
Options/Add-ons:
3-Sector Antenna Mounting System
Mast Mounting Frame for 12.6 Antenna
Mid-Level Microwave Mount
Pan & Tilt Microwave Mount with Controller
26,000-lb. GVWR
35,000-lb Pintle Hitch with 7,000-lb. Tongue Load (Vertically Adjustable)
25,000-lb. Tongue Jack, Conspicuity Markings
7,000-lb. Leveling Jacks (4), Adjustable Safety Chains
Universal Mounting, Non-Skid Hot Dipped Galvanized Steel Grating Deck
Hot Dipped Galvanized Safety Railing Around Perimeter of Trailer
Hot Dipped Galvanized, Multiple Position Outriggers
Traversing Axle Carriage (To Balance load Distribution)
235/80R16 - Load Range H Tires, Spare Tire Included
Electric Brakes, (Both Axles) With Emergency Break-Away
91” or 101” OSHA Compliant Crows Nest Mast Support Structure
DOT Compliant LED Lighting and Conspicuity Markings
Storage Boxes — Saddlebag (2), Crows Nest (1)
Retractable Rear Approach Steps
12/18
22’ Trailer (DOT Compliant)
Recommended