Safety Kit - Otto Nussbaum...

SMART LIFT2.25 SL, SL E2.28 SL, SL E2.30 SL, SL E2.32 SL, SL E2.35 SL, SL E2.40 SL, SL E

HYMAX S28003000320035004000

Safety KitAssembly instructions

safety-kit.nussbaum-group.de/en

Questions ?

These assembly instructions can also be found as a video and PDF under:

safety-kit.nussbaum-group.de/en

safety-kit@nussbaum-group.de

safety-kit.nussbaum-group.de/en

Content

Guide bar 2x

Tools requiredAllen key wrench 5 mmAllen key wrench 3 mmNail puller

Screw M8 2xNuts 2xBase plate 2x Fixing bracket 2x

Time needed: 15 min

safety-kit.nussbaum-group.de/en

Safety system SL

Lift nut

Locking nut

Latch

Capture hook

safety-kit.nussbaum-group.de/en

Preparation

Ensure there is no load on the lift.

Unscrew cover panels

safety-kit.nussbaum-group.de/en

1 Move the carrier arm upwards, then disconnect the lift from mains power or lock the switch

or

safety-kit.nussbaum-group.de/en

2 Plug in the fixing bracket

safety-kit.nussbaum-group.de/en

3 If required, move the latch bar into position with a nail puller

safety-kit.nussbaum-group.de/en

4 Place the guide bar onto the spindle bearing and push from below into the fixing bracket

safety-kit.nussbaum-group.de/en

5 Fasten the guide bar with M8 screwEnsure that the guide bar and slot hole are fastened flush, the guide bar reaches slightly over the edge

safety-kit.nussbaum-group.de/en

Visual inspection Then do another safety inspection to ensure that nothing shifted during screw tightening.

The guide bar and fixing bracket remain installed on the lift.

Have you completed theupdate on both posts?

Now continue on toour sweepstakes

safety-kit.nussbaum-group.de/en

Confirm installation by entering the serial number and

enter to win one of five lifts!

There are 3 ways to win

Simply scan the QR code and confirm onlineor confirm installation at safety-kit.nussbaum-group.de/enor send the enclosed confirmation of installation by fax or post

Each month for five monthswe are giving away

1 SPRINTER mobile liftafter confirmation of safety kit installation.