View
0
Download
0
Category
Preview:
Citation preview
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Description
Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet isflexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined.Light elements snap in place and connect automatically though the magic of magnets.Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured cornerscomplete the system that can run up, around and across walls and ceilings. Finishes alignperfectly, always, because Running Magnet can be easily cut on site (except SuspensionUp&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchangedand repositioned quickly, without tools, with artistic results. The Running Magnet is perfectfor retail displays where frequent changes are typical and absolute performance is mandatory.
Construction
Extruded aluminum housing with integral DALI controllable track system.
Flanges for 5/8”. Also 1/2” flanges availableask Flos for part numbers.
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 1 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Photometrics
For current IES files please visitarchitectural.flosusa.com
Notes
Consult factory for other ceiling typesincluding accoustic tile ceilings and wood.
Listings: UL Listed, IP20 dry location only, Class 2, Meets California standards forcommercial interiors.
Recessed Profile
Trimless extruded aluminum profile to berecessed in sheet rock ceilings and walls(1/2” or 5/8” thick).
Linear profiles available as feed profiles toconnect to a driver and intermediate profilesto fill in remaining lengths.
Each feed profile comes with two end caps.
Available lengths: 39.4”, 59”, and 78.7” and98.4”
All linear profiles are field cuttable.
Corners available for continuous runs.
Track can be powered through corners.
Corners are not field cuttable.
Warranty
2 years from date of sale.
UP & DOWNSUSPENSIONRECESSED SURFACE
Lamps
Multi Spot: 10W, 4x210lm, 2700K, CRI 8010W, 4x210m, 3000K, CRI 80
Mini Glo-ball: 7W, 800lm, 2700K, CRI 807W, 880lm, 3000K, CRI 80
Mini Glo-Ball S:3.5W, 400lm, 2700K, CRI 803.5W, 440lm, 3000K, CRI 80
Find Me Suspension: 8W, 560lm, 2700K, CRI 908W, 600lm, 3000K, CRI 90
Spot Module:8W, 600lm, 3000K, CRI 908W, 550lm, 2700K, CRI 90
Light Strip, 11.8’’:7.5W, 460lm, 3000K, CRI 907.5W, 435lm, 2700K, CRI 90
Light Strip 23.6’’:15W, 920lm, 3000K, CRI 9015W, 870lm, 2700K, CRI 90
Light Strip 35.4’’:22.5W, 1380lm, 3000K, CRI 9022.5W, 1305lm, 2700K, CRI 90
Light Strip 47.2’’:30W, 1840lm, 3000K, CRI 9030W, 1740lm, 2700K, CRI 90 Spot 120:12.5W, 1060lm, 3000K, CRI9012.5W, 985lm, 2700K, CRI90
Anthony Spot:16W, 1404lm, 3000K, CRI9016W, 1310lm, 2700K, CRI90
Electrical
24V electrical systemlimited to a maximumload of 4A and 100W per driver.
Spot and linear luminaires available withindividually addressable DALI circuitry,0-10V Dimming (from 10% up to 100%) or built-in dimmer on each fixture head.
0-10V Fixtures come from the factory set up atthe lowest level 10% they always required a0-10V signal to achieve the maximum output.
EC to supply site cabling from driver to tracklocation and site UL listed enclosure.
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 2 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Luminaries
Light Strip Module HE
Find Me Suspension
Spot 120Spot Module Multi Spot
Mini Glo-Ball Mini Glo-Ball Suspension
Anthony Spot Track
How to Specify
Part Number Dimming Protocolor
Variant
Finish
0 3 7 0 0 0 1 94 0
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
2.04‘‘
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 3 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Profiles
The extruded aluminum housing creates a clean 1-3/8” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed untilafter installation.
Both profile types can be cut to different lengths in field.
3.4
‘‘1.4‘‘
4.9‘‘
L
Length Part Number Feed Profile
06.1638
06.1639
06.1640
06.1641
39.4’’ (1m)
59’’ (1.5m)
78.7 (2m)
98.4 (2.5m)
06.1643
06.1644
06.1645
06.1646
Part NumberIntermediate Profile
VariantFinish
14 = Black
How to Specify ex. 06.1638.14.90
.90 = UL Listed
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 4 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Optional Profile Mounting Kits
Horizontal 90º Corner
Inside Corner
Outside Corner
Fixed Low-Clearance Mounting Kit ( 2 units)
End Cap kit ( 2 units)Includes the End Feed connector
08.8866.14
08.8867.14ULAdjustable Ceiling Kits (2 units)
For easier installation without blocking rough-in.
Profile Quantities Ceiling kit
2
3
1000 mm/ 1500 mm [39.37’’ / 59.06’’]
2000 mm/ 2500 mm [78.74’ / 98.42’’’]
08.8865.14A90
Corners
5.9‘‘
5.9‘‘
3.15‘‘
3.15‘‘
5.9‘‘
5.9‘‘
Dimension
Dimension
Dimension
Part Number 90º Corner
Part Number Inside Corner
Part Number Outside Corner
5.9’’ x 5.9’’
3.15” x 3.15”
5.9’’ x 5.9’’
06.1648
06.1650
06.1651
.90 = 5/8’’ Ceilingthikness
.90 = 5/8’’ Ceilingthikness
.90 = 5/8’’ Ceilingthikness
Finish Variant
Variant
Variant
Finish
Finish
14 = Black
14 = Black
14 = Black
How to Specify ex. 06.1648.14.90
How to Specify ex. 06.1650.14.90
How to Specify ex. 06.1651.14.90
Description Part Number DrawingImage QTY
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 5 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Required Drivers
QTY Image
LEDSB60W24V-NDM-D01
LEDSB60W24V-NDM-U01
LED power supply source for remote installation,24V/60W, 120-277V, Magnitude, UL Listed
LED power supply source for remote installation,24V/60W, 120-277V, ERP, UL Listed
LEDSB96W24V-NDM-D01
LEDSB96W24V-NDM-U01
LEDSB30W24V-NDM-D01
LEDSB40W24V-NDM-U01
LED power supply source for remote installation,24V/96W, 120-277V, Magnitude, UL Listed
LED power supply source for remote installation,24V/96W, 120-277V, ERP, UL Listed
LED power supply source for remote installation,24V/30W, 120-277V, Magnitude, UL Listed
LED power supply source for remote installation,24V/40W, 120-277V, ERP, UL Listed
Item Number Description Drawing
12.1”
6.8”
7.4”1.4”
1.45”
1.37”7.12”
2.36”
11.4”
11.7”
3,3”
75.18 ”
59.82 ”
24.9”
102.6”
205.2”
Dimming controllers
Dimming Control Unit Box 24V 0-10VRequired for a 0-10V Dimming installation. 1 DCU can control up to 25 fixtures08.0613.14A
3,3” 0.66”
2.1
4”
Image Part Number Description DrawingQTY
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 6 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Light Strip Module HE
Spot Module
CCT CRI
90
90
90
90
3000
2700
3000
2700
3000
2700
3000
2700
440460
880920
13201380
17601840
435435
833870
12491305
16651740
7.5W 105º
15W 105º
22.5W 105º
14 = Black
30W 105º
03.7001
03.7000
03.7003
03.7002
03.7005
03.7004
03.7007
03.7006
11.8’’ (300mm)
23.6’’ (600mm)
35.4’’ (900mm)
47.2’’ (1200mm)
Delivered LumensInitial Lumens
Watts BeamSpread
Part NumberLight Strip Length Finish Dimming Protocol
6.7‘‘
1.97‘
‘
ø 1.34‘‘
Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically withmagnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V from 10-100%. Clear end caps included for continuous look when installing end-to-end.
Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V (from 10-100%). Standard beam spread is 14°. Additional interchangeable lenses available in23° and 33°, and 10° x 40° elliptical beam spread.
90º
360º
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
08.8427.14
Flood Lens Accessory 23°
Wide Flood Lens Accessory 33°
Elliptical Lens Accessory
Extra long snoot for added shielding in aluminumwith black finish (does not protude from channelwhen tucked up into housing)
Initial Lumens
CRI CCT DeliveredLumens
418
404
600903000
550902700
8W
8W
14º
14º
03.6302 A90 = Dimmable on board
ADD = DALI
A9V = 0-10V03.6303
Watts BeamSpread
Part Number Finish Dimming Protocol
2.8
‘‘1.
3‘‘
SEE TABLE
5.16‘‘
.90 = Dimmable on board
.DD = DALI
.9V = 0-10V
14 = Black
Part Number DescriptionImage
How to Specify ex. 03.7001.14.90
How to Specify ex. 03.6302.14A90
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 7 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Multi Spot 4
Spot 120
4 accent Spot LED module can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture (from 20-100%), DALI and 0-10V (from 10-100%). Standard beam spread is 14° additional interchangeable lenses available in20° and 30°, and elliptical beam spread
Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on board fixture (from 39-100%), DALI and 0-10V (from 10-100%) Standard beam spread are 25º and 33º. Honeycomb and cross baffle included.
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
Flood Lens Accessory 20°
Wide Flood Lens Accessory 30°
Elliptical Lens Accessory
CCT
* Dimmable on board 12.5W, DALI and 0-10V Dimming fixtures are 14W
CRI
90
90
90
90
2700
2700
3000
3000
706985
430985
7311060
4441060
12.5W14W
12.5W14W
25º
33º
03.6285
03.6284
03.6286
03.6287
DeliveredLumens
Initial Lumens
Watts* BeamSpread
Part Number Finish Part Number 0-10V Dimming
2.7‘‘
0.8
7‘‘
1.57‘‘
7.87‘‘
1.3‘‘
ø 1.8‘‘
4.8‘‘
5.1‘‘
4.7‘‘
14 = Black
40 = White
Initial Lumens
CRI CCT DeliveredLumens
674
630
4 X 210903000
4 X 210902700
10W
10W
11º
11º
03.6306
03.6305
Watts BeamSpread
Part Number Finish Dimming Protocol
14 = Black
.90 = Dimmable on board
.DD = DALI
.9V = 0-10V
.90 = Dimmable on board (12.5W)
.DD = DALI (14W)
.9V = 0-10V (14W)
Part Number DescriptionImage
How to Specify ex. 03.6306.14.90
How to Specify ex. 03.6285.14.90
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 8 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Anthony Spot
Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on board fixture(from 39-100%), DALI and 0-10V (from 10-100%) Standard beam spread are 15º and 22º.
Initial Lumens
CRI CCT DeliveredLumens
1010
1052
1085
1129
1310
1310
90
90
2700
2700
1404
1404
90
90
3000
3000
16W
16W
16W
16W
15º
22º
15º
22º
03.6277
03.6274
03.6278
03.6275
Watts BeamSpread
Part Number Dimming ProtocolFinish
22‘‘
40
‘‘
165’
’
ø 110‘‘
130‘‘
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
Optional Accessories
08.8418.68A
08.8419.14A
08.0050.00
Elliptical lens
Honeycomb
Flood lens. To obtain flood optics (35º) order Anthony Spot Medium + flood lens.
A90 = Dimmable on board
ADD = DALI
A9V = 0-10V
Part Number DescriptionImage
How to Specify ex. 03.6277.14.90
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 9 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Other Light Module
Mini Glo - Ball SuspensionMini Glo -Ball Find Me Suspension
Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%, DALI and 0-10V from 10-100%.
CCT
CCT
CRI
CRI
80
80
80
80
3000
3000
2700
2700
880
440
528
271
800
400
488
259
7W
3.5W
7W
3.5W
03.6261
03.6263
03.6260
03.6262
Initial Lu-menss
Initial Lumenss
Delivered Lu-menss
Delivered Lu-menss
Watts
Watts
Part Number
Part Number
Dimming Protocol
Dimming Protocol
Dimming Protocol
2.8‘‘
2.8‘‘
2.8‘‘
3.3‘‘ 118‘‘
118‘‘
3.6‘‘
8.7‘‘
ø 4.3‘‘
ø 4.3‘‘
ø 1.3‘‘
[300
0 m
m]
MA
X.
[300
0 m
m]
MA
X.
5.11‘‘ 5.07‘‘ 5.11‘‘
CCT CRI
90
90
3000
2700
600 365
560 344
8W 14º
8W 14º
03.6273
03.6272
Initial Lumens DeliveredLumens
Watts Beam Spread
Finish
Finish
Finish
Part Number
Mini Glo - Ball
Mini Glo - Ball Suspension
Find Me Suspension
14 = Black
14 = Black
14 = Black
06 = Chrome
30 = White
How to Specify ex. 03.6260.30B90
How to Specify ex. 03.6263.30B90
How to Specify ex. 03.6273.30C90
B90 = Dimmable on board
.DD = DALI
.9V = 0-10V
B90 = Dimmable on board
.DD = DALI
.9V = 0-10V
C90 = Dimmable on board
.DD = DALI
.9V = 0-10V
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 10 of 10
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019
Visit FLOS Worldwide YouTube channel for installation videos
How to Specify
A. Select and position corners
1. Horizontal - Connect sections on flat surfaces (90º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270° corner)
B. Fill lengths between corners with Linear Housings
3.3’, 4.9’, 6.6’ or 8.2’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.
C. Drivers
Quantity of drivers determined by total wattage or light elements in section (approximately one every 10 feet). Maximum driver distance is 15’. Locate drivers nearby. Dimming hardwires into profile, bypasses driver.
D. Select Spot heads
Linear strips are available in five nominal lengths: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with a built-in dimming knob and DALI and 0-10V from 10-100%
Recommended