View
226
Download
1
Category
Preview:
Citation preview
Parabolic Tooth Profiles Belt Tooth Pitch Length Range Features & Type (mm) (mm) Benefits
MEGAPAINT
8 248 thru 4400
14 994 thru 4410
8 288 thru 4400
14 966 thru 4956
8 288 thru 4400
14 966 thru 4956
8 288 thru 4400
l Ultra High Torque Drop-In replacement for Poly Chain® l Fully functional in Poly Chain®, RPP® & HTD® pulleys l Available in silicone-free packaging (MTO)
l Super High Torque l High-Performance Tensile Cord & Rubber Compound l Double Nylon Tooth Facing
l Up to 10% increased capacity over standard RPP® constructions l Increased drive capacity with existing pulleys
l Specially designed for automotive paint lines l Silicone-Free Packaging (MTO) l Meets recognized automotive standard for painting processes
MEGAPAINT
TIGER HTB® DUAL HTB® OPEN-END HTB®
Curvilinear HTB® Tooth Profiles
TIGER 8 480 thru 4400
14 966 thru 4578
HTB® 3 Contact Jason 5 215 thru 2525
8 480 thru 4400
14 966 thru 4326
DUALHTB®
5 400 thru 1690 8 480 thru 4400
14 1190 thru 4578
OPEN-ENDHTB®
8 Up to 720 ft.
14 Up to 155 ft.
l Super High Torque HTB® l Chloroprene Rubber with Aramid Reinforcement
l Fiberglass Tensile Cord l Chloroprene Belt Body l Nylon Tooth Facing l 3M pitch - many sizes in stock, others available on Made to Order (MTO) basis
l Double-Sided Teeth for serpentine drives, reverse rotation of driven shafts
l 8mm pitch also available in Double-Sided l Roll Length varies with belt width (wider belts equal shorter rolls)
MADE IN USA
HTB is a registered trademark of Jason Industrial Inc.RPP is a registered trademark of Carlisle Power Transmission Products Inc.Poly Chain and HTD are registered trademarks of the Gates Corporation.
Belt Tooth Pitch Length Features & Type (mm) Range (mm) Benefits
Trapezoidal Tooth Profiles Belt Tooth Pitch Length Range Features & Type (Inch) (Inch) Benefits
XL 1/5 54XL - 1280XL
L 3/8 124L - 817L
H 1/2 210H - 2360H
XH 7/8 507XH - 1750XH
XXH 1-1/4 700XXH - 1800XXH
l Fiberglass Tensile Cord with high-dimensional stability
l Chloroprene Belt body with oil, heat, ozone and high tooth shear resistance
l Nylon Tooth Facing gives durability and wear resistance with increased power capacity
l Available in special constructions
DXLDLDH
1/5 60DXL thru 900DXL
3/8 124DL thru 817DL
1/2 240DH thru 1700DH
l Double Sided transmits power from either side of the belt – 100% from side with nylon tooth cover, while opposite side with ground tooth (no nylon tooth cover) has reduced rating of 50%.
l For 100% power transmission, place teeth with nylon cover against driver pulley teeth
l Double Sided total power rating is the same as for single sided (XL, L, H) belts
LXLLLLH
LXH
1/5 Up to 800 feet
3/8 Up to 360 feet
1/2 Up to 750 feet
7/8 Contact Jason
l Open-End Timing for linear, positioning and reversing drives
l Perfect alternative to chain or cable drives
l Available in standard widths - special width/length upon request
Megarubber Made to Order - Special Products Belt Type Description Features & Benefits
LT™ Low Temperature - Synchronous 8M pitch belt for extreme low temperature applications l Capable of full power operation to -40°F
HTG™ Hi-Temp Non-Marking - Synchronous 8M & H pitch belt for use on paper transfer machinery
l Heat resistance up to 320°F l Non-marking, Gray HNBR compound
LN1™ Low Noise - Synchronous 8M pitch for applications where minimum drive noise is critical
l Eliminates noise on low speed/high tension drives such as exercise equipment
HT™ High Temperature - Synchronous belt for use on high temperature applications
l Heat resistance up to 275°F l Available in 8M & H pitch
HTX™ High Temp Conveyor - Synchronous non-marking blue silicone 5M pitch belt - ideal for glass industry
l Heat resistance up to 345°F l Designed for use on conveyor systems
BLUE™GRIP
Silicone-Free Conveyor/Transfer - blue, non-marking abrasion resistant compound
l Available in L, H, T pitch l Variable extra thickness upon request
Non-Marking Chloroprene for Standard Timing & HTB®
Belt Type Compound Color Duro Features & Benefits
NON-MARKING CHLOROPRENE
PINK 70
GRAY 50* & 70
WHITE 40
YELLOW* 40
BLACK
BLUE FDA**
50
65
Non-Marking Chloroprene stock compounds are specially formulated for packaging, bottling and applications requiring belts to leave no imprint on surfaces.
*Dual durometer construction and requires a black 70 durometer chloroprene underply
**Does not imply that belts made from blue FDA are FDA-approved. Reference to FDA means raw materials used to produce compound comply with US Code of Federal Regulations Title 21, Part 177.2600
MADE IN USA
MADE IN USA
RSYNCH-1 © Copyright 2013 Jason Industrial Inc. Printed in USA
MEGADYNE HEADQUARTERS
Via Trieste 16, 10075Mathi (TO) - ITALYmail@megadyne.itwww.megadyne.it
JASON HEADQUARTERS
340 Kaplan DriveFairfield, NJ 07004Ph: 973-227-4904Fax: 973-227-1651www.jasonindustrial.com
EUROPEMIDDLE EASTAFRICA
MATHI (Italy)*VENICE (Italy)MILAN (Italy)*MINSK (Belarus)PRAGUE (Czech Republic)PARIS (France)ST. JEANNE DE MAURIENNE (France)*LYON (France)BORCHEN (Germany)*ULM (Germany)BUDAPEST (Hungary)BYDGOSZCZ (Poland)BARCELONA (Spain)*DUDLEY (U.K.)STOCKHOLM (Sweden)
AMERICAS
FAIRFIELD, NJ (U.S.A.)CAROL STREAM, IL (U.S.A.)BELL, CA (U.S.A.)TAMPA, FL (U.S.A.)DALLAS, TX (U.S.A.)PORTLAND, OR (U.S.A.)CHARLOTTE, NC (U.S.A.)*GREENVILLE, SC (U.S.A.)*DORVAL, Quebec (Canada)MISSISSAUGA, Ontario (Canada)EDMONTON, Alberta (Canada)AZCAPOTZALCO (Mexico)SAO PAULO (Brasil)SOROCABA (Brasil)COLOMBIA
*MANUFACTURING FACILITIES
Jason Industrial Inc.®A MEGADYNE GROUP CO.
ASIA/PACIFIC
NINGBO (R.P.C.)*QINGDAO (R.P.C.)*SHANGHAI (R.P.C.)FOSHAN (R.P.C.)
Non-Marking Latex for Standard Timing & HTB®
Belt Type Compound Color Duro Features & Benefits
NON-MARKING LATEX RED 40
YELLOW 40
BLACK 60
l Formulated for extremely high co-efficient of friction. Ideal for conveying and incline applications.
l All Latex compounds are Non-Marking
l All Latex compounds are Dual Durometer constructions and require a Black 70 Durometer Chloroprene underply
Additional Options for Standard Timing & HTB®
Option Compound Color Duro Features & Benefits
MADE INUSA
Anti-Static Compound BLACK 70
l For use in applications where static build-up and discharge could damage electrical components
ExtraBacking BLACK 70
l Additional thickness of standard black chloroprene compound l Also used as foundation for secondary shaping/machining of belt back
l Available with any compound
l Usually limited to 1/2" overall thickness - all pitches
Tensile Members - Special Tracking Construction
l Fiberglass cord with alternate S&Z twist is standard. For right or left hand tracking characteristics, S-Twist or Z-Twist construction is available.
l All Special Compounds for Standard Timing and HTB® are fully-molded (not glued-on) layers. Compounds are homogeneously vulcanized with belt body ensuring uniform structure and maximum adhesion. l Dual-Durometer constructions cannot be made to the standard belt thickness; they must have a minimum of 1/16" of extra backing. l Class 1 Grinding Thickness Capability ± .005"
l Many special constructions for Standard Timing and HTB® are available from stock. They are generally available 3 weeks after receipt of order and often in less time.
BELT SLEEVE CUTTINGJason Industrial keeps all of our ribbed, banded and synchronous belting products in sleeve form. This allows for maximum flexibility when it comes to your urgent requests. From this sleeve stock, we can cut to conventional industry standard dimensions. Or, if you need special non-stock belt widths, we can quickly measure and execute your exact request - this can include custom branding or part numbers.
MADE INUSA
Recommended