View
2
Download
0
Category
Preview:
Citation preview
DIVISION 07 72 33 Roof Hatches Roof Safety Rails Safety Posts
DIVISION 07 72 36 Smoke Vents
Roof AccessoRies
Construction Products Group
www.activar.com
TO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOm TO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOmTO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOm TO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOm
ROOF HaTcH: Galvanized Steel or aluminumcertifications: RHG (galvanized) models include components or materials that are ASTM certified under Specifications A792/A792M-06a; A653/A653M-06a; C726-05; and A36/A36M-05. RHA (aluminum) models include components or materials that are ASTM certified under Specifications 209-06 and C726-05.
load/Deflection: Both steel and aluminum roof hatch covers have been tested and approved to support a minimum live load of 40 lbs./ft.2 with a maximum deflection of 1/190th of the span, maximum negative load of 50 lbs./ft.2 wind uplift, and 110 mph wind load when cover is in an open position.
Insulation: The curb includes a 1" fiberboard insulation surrounding the base, and 1" fiberglass insulation between the exterior cover and liner.
construction: RHG: 14 gauge galvanized steel with 12" high curb and 4" wide flange for securing to roof deck. The cover includes a 14 gauge galvanized steel exterior and 22 gauge liner with with a TPE draft seal gasket door seal. RHA: .090 aluminum with 12" high curb and 4" wide flange for securing to roof deck. The cover includes a .090 aluminum exterior and .040 aluminum liner with a TPE draft seal gasket door seal.
Hardware: Hardware includes a heavy duty hinge, heavy gauge automatic hold open arm with red grip, compression-operated shock-absorbing cylinder, exterior handle with integral padlock hasp, and interior locking handle with interior padlock hasp.
Finish: RHG: Bonderite®, pre-treated grey hammertone powder coat. RHA: Bonderite®, pre-treated bronze powder coat.
Model Opening Size Weight
RHG-1 30" x 36" 150 lbs.
RHA-1 30" x 36" 90 lbs.
RHG-2 54" x 30" 210 lbs.
RHA-2 54" x 30" 115 lbs.
RHG-3 96" x 30" 315 lbs.
RHA-3 96" x 30" 190 lbs.
RHG-4 36" x 36" 185 lbs.
RHA-4 36" x 36" 110 lbs.
RHG-5 48" x 48" 260 lbs.
RHA-5 48" x 48" 160 lbs.
Custom Sizes Available Upon Request
SaF-T-HaTcH ROOFTOP Safety Rail (Patent Pending)certifications: Meets OSHA required compliance for safe egress and ingress through rooftop hatch openings while hatch is in use. Complies with OSHA CFR 29-1910.232 and CFR 29-1910.27.
construction: Rail: 1-5/8" OD A53 grade B seamed galvanized steel with zinc-plated post caps. The base is factory galvanized 2" x 2" 16 gauge seamed steel with cast steel hot dipped galvanized clamps.
Guard: Zinc-plated 3/16" ASTM chain with quick links and hoops or optional galvanized self-closing rigid gate.
Finish: Safety Yellow Powder Coating.
Installation: Quickly installs by a clamping frame around curb base of roof hatch or fire hatch. Does not require “approved” installer. Fits all brands of existing roof hatches with cap flashing—field adjustable to fit flashing size.
Model Opening Size Weight Fits Roof Hatch
STH-1 30" x 36" 66 lbs. RHA/RHG-1
STH-2 54" x 30" 70 lbs. RHA/RHG-2
STH-3 96" x 30" 80 lbs. RHA/RHG-3
STH-4 36" x 36" 68 lbs. RHA/RHG-4
STH-5 48" x 48" 75 lbs. RHA/RHG-5
Custom Sizes Available Upon Request
1" (25mm) FIBERGLASS INSULATION
14 ga. GALVANIZED STEELOR .090 ALUMINUM
COMPRESSION CYLINDER TPE CONTINUOUS
HATCH SEAL
22 ga. GALVANIZED STEELOR .040 ALUMINUM
RED VINYL GRIP
14 ga. (1.9mm) GALVANIZED STEEL OR .090 ALUMINUM
ROOFING BY OTHERS
12"
WIDTH
TO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOm TO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOmTO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOm TO ORDeR call 1-800-554-6077 OR VISIT www.jlINDuSTRIeS.cOm
DOuBle leaF SmOKe VeNT ul-lISTeD OR Fm-aPPROVeD certifications: FM Approved and UL Listed. The smoke vents are equipped with a UL listed 165º F fusible link for automatic operation.
construction: Covers are 11 gauge aluminum insulated with fiberglass, 14 gauge galvanized steel curb and curb frame fully welded and ground smooth, gasketed and insulated for weather tightness.
Operation: Torsion spring drives open the covers automatically. Shock absorbers control the speed of the leaves as they open. The fusible link can be quickly and easily replaced.
Hardware: Heavy gauge aluminum 3/16" pivot hinges. Pull handles are provided for exterior or interior manual operation.
Finish: 2 coats of factory-applied primer.
clear Opening Size 48" x 48" 48" x 72" 48" x 90" 48" x 96" 60" x 60" 60" x 96" 72"x 72"
FM-Approved FDFV-1 FDFV-2 FDFV-3 FDFV-4 FDFV-5 FDFV-6 FDFV-7
Custom Sizes Available Upon Request • Fusible Links with Higher Temperature UL-Listings Available Upon Reqest
clear Opening Size 48" x 48" 48" x 72" 48" x 90" 48" x 96" 60" x 60" 60" x 96" 60" x 120" 60" x 144" 66" x 144" 72" x 72"
UL-Listed UFV-1 UFV-2 UFV-3 UFV-4 -- -- -- -- -- --
FM-Approved FFV-1 FFV-2 FFV-3 FFV-4 FFV-5 FFV-6 FFV-7 FFV-8 FFV-9 FFV-10
Custom Sizes Available Upon Request • Fusible Links with Higher Temperature UL-Listings Available Upon Reqest
COVER FRAME 14 GA. GALV. STEEL
3/16" FORMED PIVOT HINGEWITH 3/8"CADMIUMSHOULDERPIVOT BOLT
COVER - 11 GA. ALUMINUM REINFORCING CHANNEL CONTINUOUS BULB GASKET
STEEL ROLLER WHEEL
3/8" CHROME VANADIUM TORSION SPRING
CURB FRAME14 GA. GALV. STEEL
WHEEL GUIDE WITH SAFETY CABLE
CENTER GUTTER 14 GA. GALV. STEEL
INSIDE DIMENSION REQUIRED
SECURING BY OTHERS
FULLY ENCLOSED AUTOMATIC PULL RELEASE LATCH UNIT
SHOCK ABSORBER WITH HOLD OPEN ARM - RED VINYL GRIP
COVER LINER 24 GA. GALV. STEEL
4"4"
1'-4"
14 GA. GALV. STEEL COVER FRAME
ACRYLIC DOME
11GA ALUM COVER
14 GA. GALV. STEEL CENTER GUTTER6063 - T5 EXTRUDED ALUM. RETAINING CAP
3/8” FORMED PIVOT HINGE WITH CADMIUM SHOULDER PIVOT BOLT
SHOCK ABSORBER & RED VINYL GRIP HOLD OPEN ARM14 GA. GALV. STEEL
CURB FRAME
GASKET - 8’ O.C.
CLEAR OPENING NO REQ’D
SECURING BY OTHERSFULLY ENCLOSED AUTOMATIC PULL RELEASE LATCH UNIT
WHEEL GUIDE & SAFETY CABLE
3/8” CHROME VANADIUM TORSION SPRING
SKYLIGHT FRAME .055 6063 - T5 EXTRUDED ALUM.
4” 4”
DOuBle leaF DOmeD SmOKe VeNTcertifications: FM Approved. The smoke vents are equipped with a UL listed 165º F fusible link for automatic operation.
construction: Dome frame is a minimum thickness of .072 aluminum and provides a self-contained sloping condensation and weepage gutter for drainage. Covers are one-piece acrylic dome (either white translucent or clear). The 14 gauge galvanized steel dome retaining frame is secured to the 14 gauge galvanized steel curb frame. The galvanized steel curb and curb frame are fully welded and ground smooth, gasketed and, insulated for weather tightness.
Operation: Torsion spring drives open the covers automatically. Shock absorbers control the speed of the leaves as they open. The fusible link can be quickly and easily reset and a new link inserted.
Hardware: Heavy gauge aluminum 3/16" pivot hinges. Pull handles are provided for exterior or interior manual operation.
Finish: 2 coats of factory-applied primer.
SuBmITTalS aVaIlaBle aT: www.jlINDuSTRIeS.cOm
JL INDUSTRIES INCORPORATED—Division of Activar Construction Products Group • Printed in USA • © 2007
maNuFacTuRING/waReHOuSING lOcaTIONSRa50702
lP-4 SaFeTy POSTThe LP-4 Safety Post provides a convenient and safe method of climbing off and onto fixed access ladders. Available in yellow powder coated steel, it meets ANSI A14.3 and OSHA requirements.
easy to Install: The LP-4 Safety Post comes pre-assembled and attaches directly to the top two rungs (square or round) with just four bolts.
easy to use: When at the top of the ladder extend the safety post. The spring counter weight makes it easy to lift with just one hand. Step on or off the ladder in a safe standing position while holding onto the post. A latch maintains the post at variable heights and is easily released for retracting the pole.
Safety features include a square post for a no slip grip and a ring at top for a harness.
weight: 25 lbs.
Finish: Yellow Powder Coat
5’-0”
SAFETY POST SIDE ELEVATION21 7/8˝
18 3/8˝
OVER
ALL
LA
DDER
HEI
GH
T
EQUA
L S
PACE
S A
T 12
˝ O.
C.
FRONT ELEVATION
7˝ (WALL)
7˝
2˝ X 5/16˝ TYPALUMINUM WALLTOP BRACKET
2˝ X 5/16˝ TYPALUMINUM WALLINTERMEDIATEBRACKET
TYP ALUMINUM SERRATEDRUNGS 1 1/4˝
4˝ X 2˝ X 5/16˝ALUMINUM ANGLESTANDARD FLOORBRACKET
ROOF HATCH
TOP OF DECKING12˝
(VER
IFY
FIEL
D DI
MEN
SIO
N)CU
RB(V
ERIF
Y)
8˝
SIDE ELEVATION
1 1/4˝ SQ. EXTRUDEDRUNG 6065-TS
1/4˝ RUNG, STAINLESSSTEEL FASTENERS ATBRACKETS
7/16˝ HOLES FOR3/8˝ Ø ANCHOR BOLTS(BY OTHERS)
2˝ X 5/16˝ ALUMINUM FLATBAR WALL BRACKET (SEEELEVATION FOR LOCATION)
NOTE: INTERMEDIATE BRACKETREQUIRED WHEN LADDERHEIGHT IS 10´-0˝ OR MORE
#12 X 1 1/4˝ STAINLESSSTEEL HEX HEAD TAPINGSCREWS
HL-1 EXTRACTEDALUMINUM CHANNELRAIL 6065-TSHL-2 EXTRUDED ALUMINUM COVER PLATE 6065-TS
TOP LADDER DETAIL
5´-0˝
R 13˝ 13˝ SQ. TUBE
1/4˝ STL.
LOCK NUT& WASHER
S.125˝ ØU-BOLT
1.50˝SQ. TUBE
8 1/4˝ IN DOWN POSITION45˝ IN UP POSITION 12˝
RUNG RUNG
CONSTANT FORCESPRING
3/8˝ Ø BOLT & NUTS
3/8˝ ALUM.
1/4˝ STAINLESS STL.
SQ. HOLE
SQ. HOLE
.80˝
2.25˝.875˝.875˝2.375˝
1.00˝4X • .375˝
SQ. HOLE
CLAMPINGPLATE
3/8˝ X 1.80˝SLOT
3/8˝ X 1.80˝SLOT
A375 ØU-CLIP
SHOP WELDBOTH SIDES
16˝
4.125˝4.00˝
CLAMPINGPLATE1.5˝ SQ. TUBE
SLOPE3.5˝
2.25˝
1.5625˝SQ. HOLE3.00˝
5’-0”
SAFETY POST SIDE ELEVATION21 7/8˝
18 3/8˝
OVER
ALL
LA
DDER
HEI
GH
T
EQUA
L S
PACE
S A
T 12
˝ O.
C.
FRONT ELEVATION
7˝ (WALL)
7˝
2˝ X 5/16˝ TYPALUMINUM WALLTOP BRACKET
2˝ X 5/16˝ TYPALUMINUM WALLINTERMEDIATEBRACKET
TYP ALUMINUM SERRATEDRUNGS 1 1/4˝
4˝ X 2˝ X 5/16˝ALUMINUM ANGLESTANDARD FLOORBRACKET
ROOF HATCH
TOP OF DECKING12˝
(VER
IFY
FIEL
D DI
MEN
SIO
N)CU
RB(V
ERIF
Y)
8˝
SIDE ELEVATION
1 1/4˝ SQ. EXTRUDEDRUNG 6065-TS
1/4˝ RUNG, STAINLESSSTEEL FASTENERS ATBRACKETS
7/16˝ HOLES FOR3/8˝ Ø ANCHOR BOLTS(BY OTHERS)
2˝ X 5/16˝ ALUMINUM FLATBAR WALL BRACKET (SEEELEVATION FOR LOCATION)
NOTE: INTERMEDIATE BRACKETREQUIRED WHEN LADDERHEIGHT IS 10´-0˝ OR MORE
#12 X 1 1/4˝ STAINLESSSTEEL HEX HEAD TAPINGSCREWS
HL-1 EXTRACTEDALUMINUM CHANNELRAIL 6065-TSHL-2 EXTRUDED ALUMINUM COVER PLATE 6065-TS
TOP LADDER DETAIL
5´-0˝
R 13˝ 13˝ SQ. TUBE
1/4˝ STL.
LOCK NUT& WASHER
S.125˝ ØU-BOLT
1.50˝SQ. TUBE
8 1/4˝ IN DOWN POSITION45˝ IN UP POSITION 12˝
RUNG RUNG
CONSTANT FORCESPRING
3/8˝ Ø BOLT & NUTS
3/8˝ ALUM.
1/4˝ STAINLESS STL.
SQ. HOLE
SQ. HOLE
.80˝
2.25˝.875˝.875˝2.375˝
1.00˝4X • .375˝
SQ. HOLE
CLAMPINGPLATE
3/8˝ X 1.80˝SLOT
3/8˝ X 1.80˝SLOT
A375 ØU-CLIP
SHOP WELDBOTH SIDES
16˝
4.125˝4.00˝
CLAMPINGPLATE1.5˝ SQ. TUBE
SLOPE3.5˝
2.25˝
1.5625˝SQ. HOLE3.00˝
Recommended