View
3
Download
0
Category
Preview:
Citation preview
READ THESE INSTRUCTIONS BEFORE INSTALLING THE SYSTEM
Setting mark
1
2
3
1
2 3
4
5
6
7
Pin locking hole
5 mm
Centre line of rail
Pin movement
Take off side Landing side
Post
Rail
Dummy post
Minimum 400 mm fall
Take off side Landing side
Rail
Pivot point dowel
Rigging screw body adjustment
Steel cable or rope loop
Tighten bolt to correct torque to tension steel cable or rope assembly
Minimum 400 mm fall
Take off side Landing side
Minimum 400 mm fall
Minimum 400 mm fall
Take off side Landing side
Take off side Landing side
Take off side Landing side
Dummy and lower rail held by plastic tie
Note: If hedge is easily deformable the hedge can go all the way to the bottom of the rail
Landing side
Take off side
Recommended