View
222
Download
0
Category
Preview:
Citation preview
20
Rainscreen and Infill Panel Systems Folded Louvre Panel
C COPYRIGHT OF THE DESIGNERSDR DESIGN RIGHTS
E: info@edmspanwall.com www.edmspanwall.comARCHITECTURAL
METAL PRODUCTS
21
These press formed banks of look-a-like louvres can be used to great effect increating a different facade texture in large building facades. Manufactured from0.9mm thickness aluminium PVF2 painted coil material or 1.2 to 1.5mm mill finishaluminium with a polyester powder paint finish to a standard RAL colour.
Standard profiles are available or the blade pitch and depth can be designed tointegrate into other building elements.
The louvre banks can be made active by perforating the horizontal return surface togive varying degrees of free air space.
Rainscreen and Infill Panel Systems Folded Louvre Panel
C COPYRIGHT OF THE DESIGNERSDR DESIGN RIGHTS
E: info@edmspanwall.com www.edmspanwall.comARCHITECTURAL
METAL PRODUCTS
22
Rainscreen and Infill Panel Systems Folded Louvre Panel
The EDM Architectural Metal Products folded louvre panel in a range of metal finishesis designed to be installed into Spanwall panel systems.
The folded louvre can also be installed into complete louvre bays with it’s own supportsystem.
C COPYRIGHT OF THE DESIGNERSDR DESIGN RIGHTS
E: info@edmspanwall.com www.edmspanwall.comARCHITECTURAL
METAL PRODUCTS
2335
35
35
12
30
35
40
40
14
14
14
14 1011
11
32.5
32
12
60˚
10
10
10
cutout
cutouts
120˚
95˚
111˚
111˚
111˚
The folded louvre panel edge frame detail can be designed to suit most installations.
The profiles shown below were manufactured in stainless steel for the George’s Quayin Dublin.
A ventilation requirement to the offices required air intake panels at each floor level.
Girth 200
Material Aluminium
Gauge To Project Specification
Length Up to 4.000
PPC Standard Colour
Girth 340
Material Aluminium
Gauge To Project Specification
Length Up to 4.000
PPC Standard Colour
Rainscreen and Infill Panel Systems Folded Louvre Panel Optional Profiles
C COPYRIGHT OF THE DESIGNERSDR DESIGN RIGHTS
E: info@edmspanwall.com www.edmspanwall.comARCHITECTURAL
METAL PRODUCTS
24
Rainscreen and Infill Panel Systems Spandrel Infill Panels into Curtain Walling System
Spandrel panels can be manufactured as folded trays in many different metals andfinishes. The spandrel panels can also be made as a bonded/insulated panel to suit theglazing rebate in curtain wall systems.
With all the knowledge and experience of the Spanwall composite panel manufacturingcompany within the Group EDM can offer fully insulated bonded composite infillpanels for all major curtain walling systems.
The edge details can be designed to give recessed, fully flush or expressed panels.
The outer skin can be prepainted PVF2 finish aluminium or P.P.C finished aluminium toany standard RAL colour.
The insulation core can be high density polystyrene or rockwool lamella slabs with adesigned thickness to meet required U values.
Flat facedinfill panel
Rebatedinfill panel
C COPYRIGHT OF THE DESIGNERSDR DESIGN RIGHTS
E: info@edmspanwall.com www.edmspanwall.comARCHITECTURAL
METAL PRODUCTS
25
EDM Products in conjunction with Spanwall composite panels can manufacture a widerange of fully bonded composite infill panels.
For fitting into curtain walling these bonded insulated panels can have various edgedetails to create flush façades or rebated panel details.
Designs to suit all major glazing and curtain walling sections are available in a rangeof external paint finishes.
Insulation cores to meet building regulations and fire performance can be specified.
Rainscreen and Infill Panel Systems Spandrel Infill Panels into Curtain Walling System
Recommended