View
0
Download
0
Category
Preview:
Citation preview
Roof
Edg
e Sy
stem
s
www.jm.com
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
fasc ia coping gutter
downspout accessor ies
custom edges
Presto-Lock Coping
Presto-Weld Drip Edge
Presto-Tite F
asci
a
Overview • Full system is covered under one warranty
• Custom & radius profiles available; can accommodate multiple nailers
• Slotted fastening holes for proper thermal movement & correct fastener placement
• Available in standard & custom finishes
Installation Benefits• Non-penetrating design eliminates
stripping in or heat-welding, typical of other designs
• Pre-fabricated miters & accessories ensure a proper fit & save time & labor by eliminating field fabrication
• 12’ lengths
• No unsightly cover plates
• Full snap on design for easy installation
• Arrives at the job site with all fasten ers, splice plates and drivers included (Sealant and fasteners provided by others for Presto-Lock Fascia)
Testing
800-445-1500 • www.jm.com
Presto-Tite FasciaFully Adhered or Mechanically Attached Single-Ply
24 ga. & .040” fascia cover
System Benefits
Johns Manville Roof Edges
Johns Manville’s line of roof edge systems is engineered and tested to withstand the harshest of conditions and is specifically designed to compliment the Johns Manville
line of roof systems. The roof edge is the most vulnerable part of the roof because it is subject to wind forces that greatly impact the integrity of the entire roof system. Johns Manville can provide a full system warranty that covers both the membrane and the roof edge. Check with your Johns Manville sales representative.
Presto-Tite Fascia Built-Up or Modified Version
24 ga. & .040” fascia cover
Presto-Tite Extended Fascia Single-Ply Version
Presto-Tite Canted Fascia Existing Beveled Wood Nailer Version
22 ga, 24 ga, .040, .050” & .063” fascia cover
Presto-Lock Fascia Fully Adhered or Mechanically Attached Single-Ply (shown) & Built-
Up or Modified Versions 24 ga., .040”, .050” & .063” fascia cover
Presto-Tite Extended FasciaFully Adhered or Mechanically Attached Single-Ply (shown) & Built-
Up or Modified Versions 22 ga., .050” & .063” fascia cover
Presto-Tite Canted Fascia Galvanized Waterdam Version
22 ga, 24 ga, .040, .050” & .063” fascia cover
Presto-Lock CopingTapered (shown), Flat or Existing Slope Versions
24 ga., .040”, .050” & .063” coping cover
Johns Manville Roof Edges
Presto-Tite Fascia HG Fully Adhered or Mechanically Attached Single-Ply (shown) & Built-Up or
Modified Versions.050” & .063” fascia cover
51 Lexington Street Lewiston, ME 04240p: 800-445-1500f: 207-784-0125
www.jm.com
© 2017. By presenting this catalog, Johns Manville does not claim to serve in any but an advisory capacity and can undertake no liability. If necessary, all recommendations contained herein regarding the use of our products should be modified to conform with local conditions and the materials employed. Johns Manville reserves the right to make changes or to amend any of the information contained in this publication, whether to present new information obtained, or as needed to conform to a specified project, job or climactic condition. 0416
Materials & Finishes
Johns Manville also offers standard coil anodized finishes in clear, medium bronze, dark bronze and black. In addition to our standard finishes, Johns Manville can provide custom color, postcoated Kynar paint finishes and batch anodized finishes on all mill aluminum gauges listed.
IMPORTANT NOTE: Due to shade variations in the anodizing process and mill finishes, it is recommended that the contractor work with the architect or building owner to sort and install products according to the owner’s preference. Johns Manville offers no warranty to anodized or mill finishes and will not be held responsible for shade variations inherent to the anodizing process.
Kynar based fluropolymer coating is a high-grade architectural finish offering excellent resistance to degradation caused by nature’s elements and airborne contaminants. A limited thirty (20) year warranty is available on the standard coil-coated colors shown. A limited thirty (30) year warranty is available on custom, postcoated aluminum applications.
These color samples are printer’s reproductions and may vary slightly from actual colors supplied. Finished color chip samples are available upon request. Johns Manville will not be held responsible for color selections chosen from printed literature.
Kynar 500® is a registered trademark of Elf Atochem, North America, Inc.
Other Available Finishes:Galvanized Steel: 16 ga., 20 ga., 24 ga. & 22 ga.110 Copper: 16 oz. & 20 oz.304-2B Stainless Steel: 24 ga., 22 ga. & 20 ga.
Almond
Matte Black
Champagne (Metallic)
Sandstone
Burgundy (Brandywine)
Weathered Zinc
Dark Bronze
Teal
Mansard Brown
Patina Green
Cityscape
Terra Cotta
Zinc
Slate Gray
Cardinal (Regal) Red
Silversmith
Hunter Green
Clear Anodized
Hartford Green Colonial Red
Hemlock Green Forest (Sherwood) Green
Stone White
Charcoal (Charcoal Gray)
(Classic) Copper Penny
Bone White
Midnight (Extra Dark) Bronze
Silver (Metallic)**
Sierra Tan
Sky (Military) Blue
Sand Stone *
Medium Bronze
Interstate (Regal) Blue
Express Colors –
Standard Colors –
Premium Colors –
Award Blue
EvergreenMusket GrayGranite Slate Blue
Aged Copper
Mill Finish
Recommended