View
243
Download
0
Category
Preview:
Citation preview
260SERIES
60 High-Efficiency Monocrystalline Quasar Cells;
Narrow distribution of conversion efficiency;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Low power tolerance of ±3%;
Quasar solar cell uses a novel technology, which improves light response
effectively, and results in higher conversion efficiency. This new technology
also succeeds in simplifying the production process, as well as reducing the
operation links and narrowing the distribution of conversion efficiency, thus
brings more advantages to the quality control. In addition, Quasar technol-
ogy could be combined with other new technology developed by CSUN’s
R&D center to improve conversion efficiency continuously.
Product workmanship: 10 years
Power output: 12 years (90% of Pmin) 20 years (83% of Pmin) 25 years (80% of Pmin)
CSUN250-60MCSUN255-60MCSUN260-60MCSUN265-60MCSUN270-60M
( Both expected in Nov. 2011)
Average Cell Efficiency
QUASAR
19%
Features
Guarantee
Certificates
Member of
note:mm(inch) 8x8(0.31x0.31)Drainage holes4 place
9(0.35)
35(1.38)
14(0
.55)
2(0.
078)
50(1
.97)
1640
(64.
54)
940(37)990(38.96)
Junction box
B
10.8(0.43)
A-A
B
A A
14x9(0.55x0.35)
Mounting slots8 place
Φ 6(0.24)
Ground holes2 place 86
0(33
.85)
1360
(53.
52)
1640×990×50mm
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
240 258 560 602
CSUN 270-60M CSUN 265-60M CSUN 260-60M CSUN 255-60M CSUN 250-60M
Open Circuit Voltage (Voc)
Optimum operating Voltage (Vmpp)
Maximum system voltage [V]
Current temperature coefficient
Series fuse rating[A]
Junction box
Front glass
Back sheet
Dimensions
Weight
37.6 37.3 37.9 37.8 37.5
30.3 30.1 30.7 30.5 30.2
1000
+0.039%/K
20
with 6 bypass diodes
White toughened safety glass, 3.2 mm
composite film
1640×990×50mm (L×W×H)
Module name QUASAR 270 QUASAR 265 QUASAR 260 QUASAR 255 QUASAR 250
Peak Power (Pmpp)
Short Circuit Current (Isc)
Optimum operating Current (Impp)
Module efficiency
Voltage temperature coefficient
Power temperature coefficient
Cable
Cell encapsulation
Frame
Cells
270 265 255 260 250
9.04 8.78 9.13 8.93 8.86
8.58 8.31 8.80 8.69 8.45
16.02% 15.40% 16.63% 16.32% 15.71%
-0.307%/K
-0.423%/K
6×10 pieces monocrystalline solar cells series strings (156mm×156mm)
length 900 mm, 1×4 mm
EVA (Ethylene-Vinyl-Acetate)
Anodized aluminum profile
Module type
19.8kg
0 10 20 30 400
2
4
6
8
10
Voltage[V]
Powe
r[W]
1000w/m2
800w/m2
600w/m2
400w/m2
200w/m2
0
50
100
150
200
25025oC
Curre
nt[A
]
0 10 20 30 400
2
4
6
8
10
Curre
nt[A
]
Voltage[V]
70oC 55oC 40oC 25oC 10oC
0
50
100
150
200
250
300
Powe
r[W]
AM1.5 1000W/m2
Dimensions
Packaging
Specifications
IV Curve
BACK VIEWFRONT VIEW
Quality and Certificates
CSUN190-48P
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 14.92%
48 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Certification Authority
TÜV Rheinland
TÜV InterCert
MCS
Power Range
175W-205W
160W-190W
175W-205W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
– 40 °C to + 85 °C
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.
Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%.Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
1000
-0.292%/K
+0.045%/K
-0.408%/K
15
6×8 pieces polycrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
White toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
Composite film
Anodized aluminum profile
1320×990×35mm(L×W×H) [51.97x38.98x1.38inch]
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Cells
190-48P
190
29.5
8.61
23.7
8.02
14.54%
185-48P
185
29.4
8.57
23.6
7.84
14.16%
180-48P
180
29.2
8.43
23.4
7.70
13.77%
175-48P
175
29.0
8.26
23.2
7.55
13.39%
195-48P
195
29.6
8.67
23.8
8.19
14.92%
IV-Curves
Dimensions
Maximum surface load capacity
Hail
Temperature range
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
1320×990×35mm 448 480 946 1014
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
0 5 10 15 20 25 300
2
4
6
8
10
0
50
100
150
200
Cur
rent
/A
Voltage/V
800W/m2
600W/m2
400W/m2
200W/m2
25oC
Pow
er/W
1000W/m2
0 5 10 15 20 25 30 350
2
4
6
8
10
0
50
100
150
200
Cur
rent
/A
Voltage/V
0oC
AM 1.5,1000W/m2
25oC 50oC 75oC
Pow
er/W
14(
0.55)
9(0.35)
35(1.38)
35(1
.38)
10.8(0.43)
2(0.
078)
940(37)
8×8 (0.31×0.31)
14×9 (0.55×0.35)
Ф6(0.24)
540(
21.2
5)
1040
(40.
93)
990(38.96)
1320
(51.
95)
Note:mm(inch)A-A
FRONT VIEW BACK VIEW
Drainage holes4 places
Mounting slots 8 places
Ground holes
Junction box
A A
B
CSUN195-72M
Features
Quality and Certificates
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Highest Module Efficiency: 16.06%
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
10-year limited product warranty;
25-year power output warranty.*
Certifications:
72 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Certification Authority
TÜV Rheinland
TÜV InterCert
UL
ASU-PTL
VDE
CSA
CEC
FSEC
MCS
Power Range
170W-200W
160W-200W
170W-195W
155W-185W
155W-180W
155W-190W
160W-190W
160W-195W
170W-200W
Test Standard
IEC61215
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
UL1703
IEC61215 UL1703
IEC61215 UL1703
IEC61215 IEC61730
Specifications
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23 m/s (51.2mph)
– 40 °C to + 85 °C
Maximum surface load capacity
Hail
Temperature range
Dimensions(L×W×H)
IV-Curves
0 10 20 30 40 500
1
2
3
4
5
6
0
50
100
150
200
Voltage/V
1000W/m 2
Cur
rent
/A
800W/m 2
600W/m 2
400W/m 2
200W/m 2
25oC
Pow
er/W
0
1
2
3
4
5
6
0 10 20 30 40 500
50
100
150
200
Curr
ent/
A
Voltage/V
0oC 25 oC
75 oC 50 oC
Pow
er/W
AM 1.5,1000W/ m2
Type
Peak Power (Pmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Optimum operating Voltage (Vmpp)
Optimum operating Current (Impp)
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Weight
1000(IEC)/600(UL)
-0.307%/K
+0.039%/K
-0.423%/K
10
6×12 pieces monocrystalline solar cells series strings
125mm×125mm (5inch)
with 3 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
white toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
composite film
anodised aluminium profile
15.6kg (34.4lbs)
205-72M
205
45.6
5.82
38.0
5.40
16.06%
200-72M
200
45.3
5.72
37.6
5.32
15.67%
195-72M
195
45.1
5.63
37.0
5.28
15.27%
190-72M
190
45.0
5.56
36.5
5.21
14.88%
185-72M
185
44.8
5.48
35.8
5.17
14.49%
Cells
Dimensions
Note:mm(inch)8x8(0.31x0.31)
10.8(0.43)
9(0.35)
35(1.38)
800(
31.4
9)
2(0.
078)
14(0
.55)
50/3
5(1.
97/1
.38)
1580
(62.
2)
14x9(0.55x0.35)
Φ 6(0.24)
758(29.83)808(31.8)
Drainage holes4 places
Junction box
B
B
A-A
A A
Mounting slots8 places
Ground holes2 places 13
00(5
1.16
)
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%. Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
1580×808×35mm (L×W×H) [62.2×31.81×1.38inch]
1580×808×35mm
Container 20’ Container40’Container20’HC Container40’HC
384 408 896 952
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
FRONT VIEW BACK VIEW
CSUN200-48M
Features
Quality and Certificates
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%
* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
10-year limited product warranty;
25-year power output warranty.*
Certifications:
48 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Highest Module Efficiency: 15.69%
Certification Authority
TÜV Rheinland
TÜV InterCert
MCS
Power Range
175W-205W
175W-200W
175W-205W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
Specifications
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%. Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
1000
-0.307%/K
+0.039%/K
-0.423%/K
15
6×8 pieces monocrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
White toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
Composite film
Anodized aluminum profile
1320×990×35mm(L×W×H) [51.97x38.98x1.38inch]
Type
Pmpp [W]
Voc [V]
Isc [A]
Vmpp [V]
Impp [A]
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Cells
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
– 40 °C to + 85 °C
Maximum surface load capacity
Hail
Temperature range
IV-Curves
Dimensions
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
1320×990×35mm 448 480 946 1014
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
205-48M
205
30.0
8.86
24.2
8.47
15.69%
200-48M
200
29.9
8.78
24.1
8.30
15.31%
195-48M
195
29.7
8.71
23.9
8.16
14.92%
190-48M
190
29.6
8.59
23.8
7.99
14.54%
185-48M
185
29.4
8.50
23.7
7.81
14.16%
0 5 10 15 20 25 30 350
50
100
150
200
250
0
2
4
6
8
10
200W/m2
Voltage/V
400W/m2
600W/m2
800W/m2
1000W/m2 25oC
Pow
er/W
Cur
rent
/A
0 5 10 15 20 25 30 350
2
4
6
8
10
0
50
100
150
200
250
75oC
AM 1.5,1000W/m2
Cur
rent
/A
Voltage/V
0oC 25oC 50oC
Pow
er/W
990(38.96) 940(37)
1320
(51.
95)
8×8 (0.31×0.31)Drainage holes4 places
14×9 (0.55×0.35)Mounting slots 8 places
Ф6(0.24)Ground holes 2 places
A A
540(
21.2
5)
1040
(40.
93)
Junction boxNote:mm(inch)
B
B
14(
0.55
)
9(0.35 )
35(1.38)
35(1
.38)
10.8(0.43)
2(0.
078)
A-A
FRONT VIEW BACK VIEW
Quality and Certificates
CSUN210-54P
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 14.67%
54 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Certification Authority
TÜV Rheinland
TÜV InterCert
Intertek
MCS
Power Range
190W-230W
180W-215W
180W-215W
190W-230W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
Specifications
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.
Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%.Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
1000
-0.292%/K
+0.045%/K
-0.408%/K
15
6×9 pieces polycrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
white toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
composite film
anodised aluminium profile
1480x990x50mm (LxWxH) [58.25x38.96x1.97inch]
Type
Peak Power (Pmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Optimum operating Voltage (Vmpp)
Optimum operating Current (Impp)
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Cells
210-54P
210
33.2
8.54
26.5
7.93
14.33%
205-54P
205
33.0
8.45
26.4
7.77
13.99%
200-54P
200
32.8
8.36
26.2
7.64
13.65%
195-54P
195
32.6
8.23
26.0
7.50
13.31%
215-54P
215
33.3
8.62
26.6
8.08
14.67%
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
IV-Curves
Dimensions
0 5 10 15 20 25 30 35 400
2
4
6
8
10
0
50
100
150
200
250
Voltage/V
0oC
AM 1.5,1000W/m2
25oC 50oC
Cur
rent
/A
75oC
Pow
er/W
0
2
4
6
8
10
0 5 10 15 20 25 30 350
50
100
150
200
Cur
rent
/A
Voltage/V
1000W/m2 25oC
800W/m2
600W/m2
400W/m2
200W/m2
Pow
er/W
FRONT VIEW BACK VIEW
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
– 40 °C to + 85 °C
Maximum surface load capacity
Hail
Temperature range
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
1480×990×50mm 280 301 600 645
Note:mm(inch)
10.8(0.43)
9(0.35)
35(1.38)
700(
27.5
5)
1200
(47.
23) 2(
0.07
8)
14(0
.55)
50/3
5(1.
97/1
.38)
1480
(58.
25)
940(37)990(38.96)
8x8(0.31x0.31)Drainage holes4 place
Junction box
B
A-A
A A
14x9(0.55x0.35)Mounting slots8 place
Φ 6(0.24)Ground holes2 place
Quality and Certificates
CSUN220-54M
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.36%
54 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
Certification Authority
TÜV Rheinland
TÜV InterCert
Intertek
MCS
Power Range
190W-230W
190W-230W
185W-225W
190W-230W
Test Standard
UL1703
IEC61215 IEC61730
IEC61215 IEC61730
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
IEC61215 IEC61730
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
– 40 °C to + 85 °C
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.
Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%.Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
1000
-0.307%/K
+0.039%/K
-0.423%/K
15
6×9 pieces monocrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
white toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
composite film
anodised aluminium profile
1480×990×50mm(L×W×H)[58.25×38.96×1.97inch]
Type
Peak Power (Pmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Optimum operating Voltage (Vmpp)
Optimum operating Current (Impp)
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Cells
225-54M
225
33.6
8.84
27.1
8.30
15.36%
220-54M
220
33.5
8.75
27.0
8.15
15.02%
215-54M
215
33.4
8.62
26.9
7.99
14.67%
210-54M
210
33.3
8.52
26.7
7.83
14.33%
230-54M
230
33.7
8.90
27.3
8.42
15.70%
Maximum surface load capacity
Hail
Temperature range
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
1480×990×50mm 280 301 600 645
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
IV-Curves
Dimensions
0
2
4
6
8
10
0 5 10 15 20 25 30 350
50
100
150
200
250
400W/m2
Voltage/V
Cur
rent
/A 600W/m2
800W/m2
200W/m2
1000W/m2
25oC
Pow
er/W
0
2
4
6
8
10
0 5 10 15 20 25 30 35 400 5 10 15 20 25 30 35 400
50
100
150
200
250
75oCCur
rent
/A
50oC 25oC 0oC
Voltage/V
AM 1.5, 1000W/m2
Pow
er/W
990(38.96)
700(
27.5
5)
940(37)
1480
(58.
25)
1200
(47.
23)
8×8 (0.31×0.31)Drainage holes4 places
14×9 (0.55×0.35)Mounting slots 8 places
Ф6(0.24)Ground holes 2 places
A A
B
Junction box
FRONT VIEW BACK VIEW
Note:mm(inch)
35(1.38)
50/3
5(1.
97/1
.38)
10.8(0.43)
2(0.
078)
A-A
9(0.35)
14(
0.55)
Quality and Certificates
CSUN240-60P
Features
10-year limited product warranty;
25-year power output warranty.*
Certifications:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.40%
60 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Certification Authority
TÜV Rheinland
TÜV InterCert
UL
Intertek
CEC
FSEC
MCS
Power Range
210W-255W
210W-240W
225W-240W
200W-240W
220W-240W
200W-240W
210W-255W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
UL1703
IEC61215 UL1703
IEC61215 UL1703
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm(1inch) with impact speed of 23 m/s (51.2mph)
– 40 °C to + 85 °C
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.
Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%.Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
0
2
4
6
8
0 10 20 30 400
50
100
150
200
250
Cur
rent
/A
Voltage/V
200W/m 2
25oC
400W/m 2
600W/m 2
800W/m 2
1000W/m 2
Pow
er/W
0 10 20 30 400
2
4
6
8
0
50
100
150
200
250
Voltage/V
Curr
ent/
A
0oC 25 oC 50 oC 75 oC
AM 1.5,1000W/m 2
Pow
er/W
1000
-0.292%/K
+0.045%/K
-0.408%/K
15
6×10 pieces polycrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
white toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
composite film
anodised aluminium profile
1640×990×50mm (L×W×H) [64.57×38.98×1.97inch]
19.8kg (43.7lbs)
Type
Peak Power (Pmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Optimum operating Voltage (Vmpp)
Optimum operating Current (Impp)
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Weight
Cells
245-60P
245
37.1
8.74
29.7
8.25
15.09%
240-60P
240
36.9
8.67
29.6
8.11
14.78%
235-60P
235
36.8
8.59
29.5
7.97
14.47%
230-60P
230
36.7
8.52
29.4
7.83
14.17%
250-60P
250
37.3
8.81
29.9
8.36
15.40%
IV-Curves
Dimensions
Note:mm(inch) 8x8(0.31x0.31)
10.8(0.43)
9(0.35)
35(1.38)
860(
33.8
5)
2(0.
078)
14(0
.55)
50(1
.97)
1640
(64.
54)
14x9(0.55x0.35)
Φ 6(0.24)
940(37)990(38.96)
Drainage holes4 place
Junction box
B
B
A-A
A A
Mounting slots8 place
Ground holes2 place
1360
(53.
52)
Maximum surface load capacity
Hail
Temperature range
1640×990×50mm
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
240 258 560 602
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
FRONT VIEW BACK VIEW
CSUN250 -60M
Features
Quality and Certificates
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
10-year limited product warranty;
25-year power output warranty.*
Certifications:
60 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Highest Module Efficiency: 16.02%
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Certification Authority
TÜV Rheinland
TÜV InterCert
UL
Intertek
CEC
FSEC
MCS
Power Range
210W-255W
210W-250W
230W-250W
210W-255W
220W-250W
210W-255W
210W-255W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
UL1703
IEC61215 UL1703
IEC61215 UL1703
Specifications
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%. Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
1000
-0.307%/K
+0.039%/K
-0.423%/K
15
6×10 pieces monocrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
white toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
composite film
anodised aluminium profile
1640×990×50mm (L×W×H) [64.57×38.98×1.97inch]
19.8kg (43.7lbs)
260-60M
260
37.6
8.93
30.3
8.58
16.02%
255-60M
255
37.5
8.86
30.2
8.45
15.71%
250-60M
250
37.3
8.78
30.1
8.31
15.40%
245-60M
245
37.2
8.69
30.0
8.17
15.09%
240-60M
240
37.0
8.62
29.8
8.06
14.78%
Type
Peak Power (Pmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Optimum operating Voltage (Vmpp)
Optimum operating Current (Impp)
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Weight
Cells
Operating Condition & Packaging
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
– 40 °C to + 85 °C
Maximum surface load capacity
Hail
Temperature range
IV-Curves
Dimensions
note:mm(inch) 8x8(0.31x0.31)
14x9(0.55x0.35)
Drainage holes4 place
10.8(0.43)
9(0.35)
35(1.38)
860(
33.8
5)
2(0.
078)
14(0
.55)
50(1
.97)
1640
(64.
54)
Φ 6(0.24)
940(37)990(38.96)
Junction box
B
B
A-A
A A
Mounting slots8 place
Ground holes2 place
1360
(53.
52)
1640×990×50mm
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
240 258 560 602
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
FRONT VIEW BACK VIEW
Quality and Certificates
Features
CSUN290-72P
10-year limited product warranty;
25-year power output warranty.*
Certifications:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.24%
72 High-Efficiency Polycrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Certification Authority
TÜV Rheinland
TÜV InterCert
UL
Intertek
CEC
FSEC
MCS
Power Range
255W-305W
240W-290W
245W-285W
240W-290W
275W-290W
240W-290W
255W-305W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
UL1703
IEC61215 UL1703
IEC61215 UL1703
Operating Condition & Packaging
Specifications
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
– 40 °C to + 85 °C
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ±10%. Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
290-72P
290
44.3
8.75
35.6
8.15
14.98%
285-72P
285
44.1
8.67
35.4
8.05
14.72%
280-72P
280
44.0
8.58
35.3
7.94
14.46%
275-72P
275
43.8
8.48
35.2
7.82
14.20%
295-72P
295
44.4
8.83
35.7
8.26
15.24%
1000
-0.292%/K
+0.045%/K
-0.408%/K
15
6×12 pieces polycrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16inch2)
white toughened safety glass, 3.2 mm (1/8inch)
EVA (Ethylene-Vinyl-Acetate)
composite film
anodised aluminium profile
1956×990×50mm (L×W×H) [76.98×38.98×1.97inch]
23.8kg (52.4lbs)
0
2
4
6
8
10
0 10 20 30 40 500
50
100
150
200
250
300
Cur
rent
/A
1000W/m 2
800W/m 2
600W/m 2
400W/m 2
200W/m 2
25oC
Voltage/V
Pow
er/W
0
2
4
6
8
10
0 10 20 30 40 500
50
100
150
200
250
300
350
Cur
rent
/A
75 oC
Voltage/V
50 oC 25 oC 0oC
AM 1.5,1000W/m 2
Pow
er/W
Note:mm(inch)8x8(0.31x0.31)
10.8(0.43)
9(0.35)
35(1.38)
1176
(46.
28)
2(0.
078)
14(0
.55)
50(1
.97)
1956
(76.
98)
14x9(0.55x0.35)
Φ 6(0.24)
940(37)990(38.96)
Drainage holes4 place
Junction box
B
B
A-A
A A
Mounting slots8 place
Ground holes2 place
1676
(65.
96)
IV-Curves
Dimensions
Type
Peak Power (Pmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Optimum operating Voltage (Vmpp)
Optimum operating Current (Impp)
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Weight
Cells
Maximum surface load capacity
Hail
Temperature range
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
1956×990×50mm 200 215 480 516
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
FRONT VIEW BACK VIEW
Quality and Certificates
Features
CSUN295-72M
10-year limited product warranty;
25-year power output warranty.*
Certifications:
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd. www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
72 High-Efficiency Monocrystalline Solar Cells;
Passing mechanical load test of 5400Pa according to IEC 61215(advanced test);
Tested to withstand hails with maximum diameter of 25mm with impact speed of 23m/s;
The high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness
and impact resistance;
Integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing;
Our module technology avoids any problems of water freezing and warping;
Low power tolerance of ±3%;
Black backsheet is also available.
Our standard modules are designed, developed and manufactured for
both residential and commercial, rooftop and ground-mounted, as well as
on-grid and off-grid photovoltaic projects.
Quality of our products is the reason of CSUN’s life. We select the best raw
materials and conduct regular testing to ensure that they can meet our
rigorous quality standards. Every module has been tested before delivery
to make sure the efficiency tolerance is in a narrow range. Each link is
strictly controlled to ensure the benefit of our customers.
Highest Module Efficiency: 15.75%
* 12 year at 90% of the minimal rated power output, 20 year at 83%, and 25 year at 80%* Note: All specifications, warranties, certifications about module of “CSUN” series also apply to that of “SST”.
Certification Authority
TÜV Rheinland
TÜV InterCert
UL
Intertek
CEC
FSEC
MCS
Power Range
255W-305W
255W-305W
255W-295W
245W-300W
265W-300W
245W-300W
255W-305W
Test Standard
IEC61215 IEC61730
IEC61215 IEC61730
IEC61215 IEC61730
UL1703
UL1703
IEC61215 UL1703
IEC61215 UL1703
Operating Condition & Packaging
Specifications
The electrical data relates to standard test conditions [STC]: 1,000 W/m²; AM 1,5; 25°C.Performance deviation of Pmpp: ± 3%; Performance deviation of Voc, Isc, Vmp and Imp: ± 10%.Certified in accordance with IEC61215, IEC61730-1/2 and UL1703.
0 10 20 30 40 500
2
4
6
8
10
0
50
100
150
200
250
300
1000W/m 225oC
Cur
rent
/A
Voltage/V
800W/m 2
600W/m 2
400W/m 2
200W/m 2
Pow
er/W
0
2
4
6
8
10
0 10 20 30 40 500
50
100
150
200
250
300
350
Curr
ent/
A
75 oC
AM 1.5,1000W/m 2
Voltage/V
0oC
50 oC 25 oC
Pow
er/W
1000
-0.307%/K
+0.039%/K
-0.423%/K
15
6×12 pieces monocrystalline solar cells series strings
156mm×156mm (6inch)
with 6 bypass diodes
length 900 mm (35.4inch), 1×4 mm2 (0.16in2)
white toughened safety glass, 3.2 mm
EVA (Ethylene-Vinyl-Acetate)
composite film
anodised aluminium profile
1956×990×50mm (L×W×H) [76.98×38.98×1.97inch]
23.8kg (52.4lbs)
305-72M
305
44.9
8.87
36.2
8.43
15.75%
300-72M
300
44.8
8.80
36.1
8.32
15.49%
295-72M
295
44.6
8.73
35.9
8.22
15.23%
290-72M
290
44.5
8.67
35.8
8.11
14.98%
285-72M
285
44.4
8.60
35.7
7.99
14.72%
IV-Curves
tested up to 5,400 Pa according to IEC 61215
maximum diameter of 25 mm with impact speed of 23m/s (51.2mph)
– 40 °C to + 85 °C
Dimensions
Note:mm(inch) 8x8(0.31x0.31)
10.8(0.43)
9(0.35)
35(1.38)
1176
(46.
28)
2(0.
078)
14(0
.55)
50(1
.97)
1956
(76.
98)
14x9(0.55x0.35)
Φ 6(0.24)
940(37)990(38.96)
Drainage holes4 place
Junction box
B
A-A
A A
B
Mounting slots8 place
Ground holes2 place 16
76(6
5.96
)
Type
Peak Power (Pmpp)
Open Circuit Voltage (Voc)
Short Circuit Current (Isc)
Optimum operating Voltage (Vmpp)
Optimum operating Current (Impp)
Module efficiency
Maximum system voltage [V]
Voltage temperature coefficient
Current temperature coefficient
Power temperature coefficient
Series fuse rating[A]
Junction box
Cable
Front glass
Cell encapsulation
Back sheet
Frame
Dimensions
Weight
Cells
Maximum surface load capacity
Hail
Temperature range
1956×990×50mm
Dimensions(L×W×H) Container 20’ Container40’Container20’HC Container40’HC
200 215 480 516
www.chinasunergy.comChina Sunergy (Nanjing) Co., Ltd.
FRONT VIEW BACK VIEW
Recommended