View
214
Download
0
Category
Preview:
Citation preview
7/29/2019 Pumps for Life, Great pumps
1/2
HMA PUMPS
HMA grundfos SP designed for a long working life underground
1. Complete range of pumps and motors with flow rates of 0-475m3/h2. State-of-the-art hydraulics provide increased pump efficiency and reduced energy costs3. 100% high-grade stainless steel inside and outside provides maximum reliability4. Resistance to wear caused by sand and other abrasives.5. Resistance to aggressive water6. Motor burnout protection7. Dry-running protection8. Monitoring and communication via CU3 control unit for pumping system optimizationAPPLICATION
1. Raw water supply2. Irrigation systems3. Ground water supply4. Pressure boosting5. Overhead tank boosting6. Various industrial applicationsFlow range: 1-475m3/h
Head : 670m
Sizes : 3,4,6,8,10,12
Whatever your needs, HMA Grundfos Submersible range provides a highly efficient pumping
solution
1. High efficiency and reliability2. Corrosion resistant stainless steel3. State of the art hydraulic design4. Low maintenance costs5. Low installation costs6. High resistance to sand7. Low operating costs
Sand resistant materials and design
Groundwater often contains abrasives, such as sand, that sooner or later-will wear out both
pump and motor. In order to minimize wear and to provide maximum lifetime and optimum
performance, the SP range is designed to let the suspended particles be flushed out of the
pump with the pumped liquid. Both the chambers and the impellers of the SP range are
made of high-grade stainless steel.
7/29/2019 Pumps for Life, Great pumps
2/2
As standard, all HMA Grundfos SP models are made entirely of stainless steel DIN w-Nr
(AISI304). Where particularly aggressive liquids are encountered, the SP pumps are available
in extra high grade stainless steel DIN W- Nr. 1.4401 (AISI 316), or, for server conditions,
DIN W Nr. 1.4539 (AISI 904 L).
Erosion and corrosion of a pump mean loss of material and, consequently, a drop in
performance and efficiency of the pump. In terms of cost of Ownership, high efficiency of abrand new pump is useless if the efficiency starts to drop the moment the pump is brought
into operation. Therefore, HMA Grundfos SP pumps are made entirely of high grade
stainless steel. This material ensures high efficiency and low energy costs during the entire
life time of a pump.
The highly efficient submersible motors used with the HMA- Grundfos SP pumps, are rated
among the very best in two basic versions in a variety of sizes from 4 to 12.submersible
motors are 2-pole asynchronous squirrel-cage canned motors with thrust journal bearings.
The motors are made entirely of stainless steel, standard version to DIN W-Nr 14539.
Electrical tolerance comply with VDE 0530
Insulation class: B for 4 motors.H for 6 motors.
Enclosure class: IP 68
Voltages 3x380/415 v, 3x415v
Up to 2.2 KW also available in single phase
Motor size 4 6 8 10& 12
Liquid temp (c) 40 40 30 25
Maximum operating pressure: 4MPa (40 bar)
Higher temperature and pressure limits on request.
Connections: pipe threads 1 1/4-8Grundfos flanges 5, 6and 8
DIN flanges 6and 8
Recommended