View
389
Download
20
Category
Tags:
Preview:
DESCRIPTION
Protech products catalog
Citation preview
WE CREATE YOUR PASSION
WWW.PROTECH.BE
01-07cat2009.indd 101-07cat2009.indd 1 20-01-2009 20:47:0220-01-2009 20:47:02
CESSNA 400CESSNA 400RTF EP semi-scale airplane
high power brushless motor
included
2
01-07cat2009.indd 201-07cat2009.indd 2 20-01-2009 20:47:1220-01-2009 20:47:12
12V DC Automatic Li-PoBattery Charger and 230V Power Supply
(included)Professional 4-channel FM radio control
system with servo reverse function, charging socket and socket for fl ightsimulators
High Power Li-Po Batterypack 1200mAh - 11,1V
(included)
5 Channel FM long rangemicro receiver (installed)
3x B160 micro servos(installed & adjusted)
18A Brushless electronic speed controller (installed)
ALL YOU NEED IN ONE PACKAGE!
Item Nr: T0440.35M1 35 MHz MODE 1 T0440.35M2 35 MHz MODE 2 T0440.41M1 41 MHz MODE 1 T0440.41M2 41 MHz MODE 2 T0440.35M1 UK 35 MHz MODE 1 T0440.35M2 UK 35 MHz MODE 2
3
KIT CONTENTSStyrofoam wing, fuselage and tailplane. Preinstalled servos (3), receiver, 18A speed controller and brushless motor. 3 cell LiPo battery and charger. 4 Channel transmitter with trainer socket. All neces-sary hardware and glue. Full colour de cals and clear build ing in struc tions in Eng lish, Dutch, French and German.
REQUIRED FOR OPERATION• 8 x LR-6 size dry cells
TECHNICAL SPECS• Wingspan: 960 mm• Length: 762 mm• Wing area: 15,3 dm2
• Weight: 430 g• Motor: brushless motorFUNCTIONS• Rudder• Elevator• Ailerons• Motor
READY TO FLY ELECTRIC POWERED AIRPLANEEnjoy the fascination of model flying with this beautifully fi nished Cessna. The installed brushless driveset with Lipo is very powerful and allows this little Cessna to reach great heights effortlessly. The fl ying characteristics are mild and very forgiving just like on a high wing trainer so perfect for beginners or scale enthou-siasts who just want to enjoy a quiet and gentle fl ight. All electronics are factory installed and adjusted and the model can be completely fi nished by the time the battery is charged.
01-07cat2009.indd 301-07cat2009.indd 3 20-01-2009 20:47:1720-01-2009 20:47:17
EXTRA 330EXTRA 330RTF EP aerobatic airplane
high power brushless motor
included
4
01-07cat2009.indd 401-07cat2009.indd 4 20-01-2009 20:47:1920-01-2009 20:47:19
12V DC Automatic Li-PoBattery Charger and 230V Power Supply
(included)
Professional 4-channel FM radio control system with servo reverse function,
charging socket and socket for fl ightsimulators
High Power Li-Po Batterypack 1200mAh - 11,1V
(included)
5 Channel FM long rangemicro receiver (installed)
4x B160 micro servos(installed & adjusted)
25A Brushless electronic speed controller (installed)
ALL YOU NEED IN ONE PACKAGE!
Item Nr: T0441.35M1 35 MHz MODE 1 T0441.35M2 35 MHz MODE 2 T0441.41M1 41 MHz MODE 1 T0441.41M2 41 MHz MODE 2 T0441.35M1 UK 35 MHz MODE 1 T0441.35M2 UK 35 MHz MODE 2
5
KIT CONTENTSStyrofoam wing, fuselage and tailplane. Preinstalled servos (4), receiver, 25A speed controller and brushless motor.3 cell LiPo battery and charger. 4 Channel transmitter with trainer socket. All neces-sary hardware and glue. Full colour de cals and clear build ing in struc tions in Eng lish, Dutch, French and German
REQUIRED FOR OPERATION• 8 x LR-6 size dry cells
TECHNICAL SPECS• Wingspan: 940 mm• Length: 755 mm• Wing area: 14,6 dm2
• Weight: 510 g• Motor: brushless motorFUNCTIONS• Rudder• Elevator• Ailerons• Motor
READY TO FLY ELECTRIC POWERED AEROBATIC PLANEThe Extra 330 L is probably one of the most popular aerobatic trainer aircraft. This stunning styrofoam replica is exactly as thrilling to fl y as its fullsize counterpart. Even the most extreme aerobatics are possible thanks to the Extra's light weight and rigid structure. And with the installed brushless motor, the vertical performance is stunning. The Extra 330 L requires mini-mal assembly and can be made ready to fl y in under 1 hour, all necessary tools and hardware are included. The kit comes with a professional 4 channel radio with trainer socket for hobby grade fl ight simulators and a full range 5 channel receiver.
01-07cat2009.indd 501-07cat2009.indd 5 20-01-2009 20:47:2420-01-2009 20:47:24
6
AIRCOMBOAIRCOMBOCessna + Helixx 3D
high power brushless motor
included
TECHNICAL SPECIFICATIONS• Rotor Ø: 345mm• Weight: 230 g
FUNCTIONS• Left - Right• Forward - Backward• Climbing - Descending• Tail control
TECHNICAL SPECIFICATIONS• Wingspan: 960 mm• Length: 762 mm• Wing area: 15,3 dm2
• Weight: 430 g• Motor: brushless motor
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
01-07cat2009.indd Sec1:601-07cat2009.indd Sec1:6 20-01-2009 20:47:2620-01-2009 20:47:26
7
AIRCOMBO
12V DC Li-Po balance charger + 230V Power Supply
(included)
Professional 4-channel FM radio control system with servo reverse function,
charging socket and socket for fl ightsimulators
High Power Li-Po Batterypack 1200mAh - 11,1V
(included)
ALL YOU NEED IN ONE PACKAGE!
Item Nr: T0550.35M1 35 MHz MODE 1 T0550.35M2 35 MHz MODE 2 T0550.41M1 41 MHz MODE 1 T0550.41M2 41 MHz MODE 2 T0550.35M1 UK 35 MHz MODE 1 T0550.35M2 UK 35 MHz MODE 2
KIT CONTENTS• 100% ready to fl y Cessna 400, including 5-channel FM receiver, Brushless motor, Brushless ESC, 4 servos• 100% ready to fl y Helixx 3D, including 5-channel FM receiver, 3in1 gyro and 2 servos• 4-channel FM transmitter with servo reverse function• Automatic "Balance" Li-Po charger• 230V Powersupply• Li-Po batterypack 11,1V 1200mAh• Li-Po batterypack 7,4V 800mAh• USB adapter cable• FMS fl ightsimulator Freeware CD
REQUIRED FOR OPERATION• 8 x LR-6 size dry cells
AIRCOMBO CESSNA + HELIXX 3DDo you want to learn to fl y but can’t decide if you want to start with helicopters or airplanes? With the new AIRCOMBO you no longer have to choose: it has a com-plete airplane and a complete helicopter plus everything you will need to operate them. Transmitter, charger and batteries and even fl ight simulator software with PC interface are all included. This makes the AIRCOMBO the perfect starter kit for the beginning modeler. Even if you are an experienced modeler who wants to enjoy some fuss-free fl ying on a quiet summer evening the AIRCOMBO can be the solu-tion you were looking for.
High Power Li-Po Batterypack 800mAh - 7,4V
(included)
USB adapter cableto connect the transmitter to your PC
(included)
FMS Flightsimulator freewareLearn to fl y airplanes & helicopters
behind your screen(included)
01-07cat2009.indd Sec1:701-07cat2009.indd Sec1:7 20-01-2009 20:47:3120-01-2009 20:47:31
Pre-installed high performance CYCLON brushless motor, spinner and appropriate propeller for excellent performance
Pre-installed high quality programmable "Brushless ESC" with Li-Po battery cut-off safety function
The RTF SOLUTIONS series brings ARF models to the next level... Everything on these models is pre-assembled and pre-installed at the factory. Only little work needs to be done to get airborne. Most of the models can be completed in less then 3 hours. A true BUY & FLY model.The RTF SOLUTIONS models are equipped with a genuine CYCLON brushless motor, high quality servos, brushless speed controller and all are factory installed and adjusted.Just add your radio gear (TX & RX), batterypack and get airborne...
08-39Cat2009(RTF).indd 808-39Cat2009(RTF).indd 8 20-01-2009 20:53:0720-01-2009 20:53:07
Assembled landing gear Factory fi nished wing with pre-installed high quality aileron servos, pre-glued hinges, in-stalled control horns and push-rods
Factory fi nished fuselage with pre-installed high quality rudder & elevator servos, installed and adjusted push-rods
Factory finished elevator panel, pre-glued hinges, installed control horn. The elevator panel is marked with alignment lines for easy installation.
Factory rudder panel, pre-glued hinges, installed control horn and pre-glued hinges
08-39Cat2009(RTF).indd 908-39Cat2009(RTF).indd 9 20-01-2009 20:53:1820-01-2009 20:53:18
10
BEAVERBEAVERSemi-scale EP airplane
08-39Cat2009(RTF).indd 1008-39Cat2009(RTF).indd 10 20-01-2009 20:53:2820-01-2009 20:53:28
11
BEAVERItem Nr: T0431.RTF
READY TO FLY ELECTRIC POWERED SEMI-SCALE AIRCRAFTSemi-scale model of the famous post-ww2 de Havilland workhorse. The DHC-2 Beaver is widely used as a utility aircraft and often fi tted with skis or fl oats. Due to its very high rate of climb the aircraft is also used for skydiving.
TECHNICAL SPECIFICATIONS• Wingspan: 1020 mm• Length: 715 mm• Wing area: 17 dm2
• Weight: 910 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner
Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)
08-39Cat2009(RTF).indd 1108-39Cat2009(RTF).indd 11 20-01-2009 20:53:5520-01-2009 20:53:55
12
EV-97EV-97Semi-scale EP airplane
08-39Cat2009(RTF).indd 1208-39Cat2009(RTF).indd 12 20-01-2009 20:54:0120-01-2009 20:54:01
13
EV-97 EUROSTARItem Nr: T0416.RTF
Ready to fly electRic poweRed semi-scale aiRcRaftEV 97 Eurostar, aka Sportstar, has been manufactured in the Czech Republic and is mostly used as a trainer aircraft in Europe. The wings have been designed with little di-hedral, no taper and no washout other than that which comes from the large upturned wingtips which give the EV 97 its typical look. Protech has carefully reproduced these features in this beautiful scale model of the EV 97.
technical specifications• Wingspan: 960 mm• Length: 770 mm• Wing area: 16,3 dm2
• Weight: 600 g
functions• Rudder• Elevator• Ailerons• Motor
Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner
Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)
Rtf solutions Kit contents• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
RequiRed foR opeRation• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver
08-39Cat2009.indd 13 21-01-2009 16:02:13
14
JODEL ROBINSemi-scale EP airplane
08-39Cat2009(RTF).indd 1408-39Cat2009(RTF).indd 14 20-01-2009 20:54:2120-01-2009 20:54:21
15
Item Nr: T0452.RTF
READY TO FLY ELECTRIC POWERED SEMI-SCALE AIRCRAFTThe Robin R2160A is an all metal, low wing, aerobatic monoplane. It is powered by a 160hp Lycoming O320D engine. It is stressed to +6 -3g and has a MTOW of 900kg.PROTECH created a low-weight lovely looking ready-to-fl y semi-scale model of the original that will please many model pilots.
TECHNICAL SPECIFICATIONS• Wingspan: 1015 mm• Length: 810 mm• Wing area: 19,44 dm2
• Weight: 850 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner
Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
08-39Cat2009(RTF).indd 1508-39Cat2009(RTF).indd 15 20-01-2009 20:54:4620-01-2009 20:54:46
16
STAUDACHERSTAUDACHERSemi-scale EP airplane
08-39Cat2009(RTF).indd 1608-39Cat2009(RTF).indd 16 20-01-2009 20:54:5220-01-2009 20:54:52
17
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThis top performing unlimited aerobatic aircraft, built by Mr. Jon Staudacher, is America’s answer to the German Extra and Russian Sukhoi. Since its fi rst fl ight in 1990, it has won several medals and has been fl own in the U.S. Unlimited Team to great success. This attractive model is built up from a complete one-piece upper deck, combined with laser cut wood parts. The Staudacher is highly aerobatic and the fl ight envelope is limitless.
TECHNICAL SPECIFICATIONS• Wingspan: 1080 mm• Length: 930 mm• Wing area: 18,4 dm2
• Weight: 690 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner
Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
STAUDACHERItem Nr: T0418.RTF
08-39Cat2009(RTF).indd 1708-39Cat2009(RTF).indd 17 20-01-2009 20:54:5820-01-2009 20:54:58
18
NINJA JETNINJA JETJet Like EP airplane
08-39Cat2009(RTF).indd 1808-39Cat2009(RTF).indd 18 20-01-2009 20:55:0320-01-2009 20:55:03
19
READY TO FLY ELECTRIC POWERED JET-LIKE AIRPLANEWith the popular Apollo brushless motors it has become possible to develop serious power…The Ninja Jet is engineered to har-ness this power and convert it into plenty of forward motion. The lift surface is suffi cient to make approaches and landings non-criti-cal while the airfoil will guarantee lots of speed. The futuristic looks add to the attrac-tive nature of this purebred speedmonster and make it look like it’s already doing 100 km/h while it’s on the workbench.
TECHNICAL SPECIFICATIONS• Wingspan: 910 mm• Length: 870 mm• Wing area: 16,4 dm2
• Weight: 1030 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 8X6 propeller and spinner
Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver
Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)
NINJA JETItem Nr: T0419.RTF
08-39Cat2009(RTF).indd 1908-39Cat2009(RTF).indd 19 20-01-2009 20:55:1020-01-2009 20:55:10
20
PITTS S12PITTS S12Semi-scale EP biplane
08-39Cat2009(RTF).indd 2008-39Cat2009(RTF).indd 20 20-01-2009 20:55:1520-01-2009 20:55:15
21
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Pitts S12 is a highly evolved Pitts Special that boasts a 380 horse power Russian radial engine providing one of the most exhilarating rides available in the world today. Custom designed for extreme aerobatics it is big, bright and noisy deliver-ing a super steroids adventure. With a top speed of 385km/h this beast is not for the faint hearted! This model brings upper class aerobatics to your airfi eld!
TECHNICAL SPECIFICATIONS• Wingspan: 900 mm• Length: 840 mm• Wing area: 17,78 dm2
• Weight: 1080 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner
Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
PITTS S12Item Nr: T0456.RTF
08-39Cat2009(RTF).indd 2108-39Cat2009(RTF).indd 21 20-01-2009 20:55:2020-01-2009 20:55:20
22
BUCKER JUNGMANNBUCKER JUNGMANNSemi-scale EP biplane
08-39Cat2009(RTF).indd 2208-39Cat2009(RTF).indd 22 20-01-2009 20:55:2420-01-2009 20:55:24
23
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe BU-131 Jungmann, was originally a primary trainer for the Luftwaffe. An elegant, light machine, it weighed only 725 kg gross with lots of wing area, so it performed admirably on the 105 hp it was born with. It was such a good little trainer that Czechoslovakia, Switzerland and Spain all built the airplane under license, the Span-ish building them as late as the mid Sixties. The model combines unique design with top aerobatics.
TECHNICAL SPECIFICATIONS• Wingspan: 950 mm• Length: 820 mm• Wing area: 16,2 dm2
• Weight: 990 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2170 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner
Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
BUCKERJUNGMANN
Item Nr: T0458.RTF
08-39Cat2009(RTF).indd 2308-39Cat2009(RTF).indd 23 20-01-2009 20:55:3020-01-2009 20:55:30
24
CESSNA 182Semi-scale EP airplane
08-39Cat2009(RTF).indd 2408-39Cat2009(RTF).indd 24 20-01-2009 20:55:3420-01-2009 20:55:34
25
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Cessna 182, marketed under the name Skylane, is a four-seat (with the option of an additional two child seats, installed in the baggage area), high performance, single-engine, light airplane. Introduced in 1956, the 182 has been produced in a number of variants, including a version with retract-able landing gear, and is the second most popular Cessna model, after the 172.
TECHNICAL SPECIFICATIONS• Wingspan: 1120 mm• Length: 850 mm• Wing area: 16,7 dm2
• Weight: 940 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner
Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
CESSNA 182Item Nr: T0457.RTF
08-39Cat2009(RTF).indd 2508-39Cat2009(RTF).indd 25 20-01-2009 20:55:4320-01-2009 20:55:43
26
KATANA S15
26
Precision aerobatic EP airplane
08-39Cat2009(RTF).indd 2608-39Cat2009(RTF).indd 26 20-01-2009 20:55:4720-01-2009 20:55:47
27
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe perfect combination between perfor-mance and good looks! The symmetrical airfoil and extra root area provides excel-lent 3D aerobatic performance. Snapping roll and straight knife edge performance out of the box!
TECHNICAL SPECIFICATIONS• Wingspan: 1000 mm• Length: 1000 mm• Wing area: 23,4 dm2
• Weight: 990 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner
Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
KATANA S15Item Nr: T0455.RTF
Pm
08-39Cat2009(RTF).indd 2708-39Cat2009(RTF).indd 27 20-01-2009 20:56:0320-01-2009 20:56:03
28
ULTIMATEULTIMATEPrecision aerobatic EP biplane
08-39Cat2009(RTF).indd 2808-39Cat2009(RTF).indd 28 20-01-2009 20:56:0920-01-2009 20:56:09
29
ULTIMATEItem Nr: T0427.RTF
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEUltimate fun! The fi rst products of the Ultimate Aircraft Company were designed to improve the looks and performance of the Pitts Special. After they had produced new wings, canopy, fuselages, and wheel pants for the Pitts, it was a natural step to produce their own airplane. Soon, a legend was born.
TECHNICAL SPECIFICATIONS• Wingspan: 900 mm• Length: 965 mm• Wing area: 17,5 dm2
• Weight: 1080 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner
Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
08-39Cat2009(RTF).indd 2908-39Cat2009(RTF).indd 29 20-01-2009 20:56:3320-01-2009 20:56:33
30
TOJEIRO EPTOJEIRO EPF3A style EP airplane
08-39Cat2009(RTF).indd 3008-39Cat2009(RTF).indd 30 20-01-2009 20:56:3820-01-2009 20:56:38
31
TOJEIRO EPItem Nr: T0428.RTF
Also available as KIT: T0428
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe model is built to the highest demands of todays F3A competiton.The fully symmetrical airfoil is modifi ed and improved to suit the extremely dif-fi cult patterns. The fuselage has a large surface to perform better knife-edge ma-noeuvres. The overall aerodynamic shape of the model produces the necessary drag to slow down in vertical downlines. The torsion free wooden fuselage guarantees extreme precision in all fl ying positions.
TECHNICAL SPECIFICATIONS• Wingspan: 1100 mm• Length: 1200 mm• Wing area: 24,7 dm2
• Weight: 1250 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 2500 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner
Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)
08-39Cat2009(RTF).indd 3108-39Cat2009(RTF).indd 31 20-01-2009 20:56:4620-01-2009 20:56:46
32
COLIBRI-ECOLIBRI-EEP powered trainer
08-39Cat2009(RTF).indd 3208-39Cat2009(RTF).indd 32 20-01-2009 20:56:5120-01-2009 20:56:51
33
COLIBRI-EItem Nr: T0424.RTF
READY TO FLY ELECTRIC POWERED TRAINER AIRPLANEThe COLIBRI ARF has a very stable char-acter, fi rst fl ights will go as planned. A well thought out construction gives the Colibri enough strength to withstand the beginners abuse without adding extra weight. Taking off and landing in high grass or on a rough surface won’t pose a single problem thanks to the high, rugged landing gear.
TECHNICAL SPECIFICATIONS• Wingspan: 1400 mm• Length: 1030 mm• Wing area: 30,8 dm2
• Weight: 1420 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 3S1P LiPo 3300 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner
Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells
Pre-installed high quality ball raced std servos, 3.5 kg torque (3 pcs)
08-39Cat2009(RTF).indd 3308-39Cat2009(RTF).indd 33 20-01-2009 20:57:0120-01-2009 20:57:01
34
EXTRA 260Precision aerobatic EP airplane
08-39Cat2009(RTF).indd 3408-39Cat2009(RTF).indd 34 20-01-2009 20:57:0720-01-2009 20:57:07
35
EXTRA 260Item Nr: T0453.RTF
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Extra 260 is a one-of-a-kind aircraft created by Walter Extra, a German aero-batic competitor and one of the world’s premier aerobatic aircraft designers and builders. This hand-built aircraft is rec-ognized for its beauty, high performance, and maneuverability. The Extra 260 is a successful blend of traditional and high-technology construc-tion.
TECHNICAL SPECIFICATIONS• Wingspan: 1320 mm• Length: 1150 mm• Wing area: 34 dm2
• Weight: 2120g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 4S1P LiPo 3300 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner
Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells
Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)
08-39Cat2009(RTF).indd 3508-39Cat2009(RTF).indd 35 20-01-2009 20:57:2520-01-2009 20:57:25
36
KATANA S40KATANA S40Precision aerobatic EP airplane
08-39Cat2009(RTF).indd 3608-39Cat2009(RTF).indd 36 20-01-2009 20:57:3320-01-2009 20:57:33
37
Item Nr: T0454.RTF
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe perfect combination between perfor-mance and good looks! The symmetrical airfoil and extra root area provides excel-lent 3D aerobatic performance. Snapping roll and straight knife edge performance out of the box!
TECHNICAL SPECIFICATIONS• Wingspan: 1350 mm• Length: 1350 mm• Wing area: 42,0 dm2
• Weight: 2140 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 4S1P LiPo 3300 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner
Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells
Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)
08-39Cat2009(RTF).indd 3708-39Cat2009(RTF).indd 37 20-01-2009 20:57:4020-01-2009 20:57:40
38
BUCKER JUNGMANNBUCKER JUNGMANNSemi-scale EP biplane
08-39Cat2009(RTF).indd 3808-39Cat2009(RTF).indd 38 20-01-2009 20:57:4620-01-2009 20:57:46
39
BUCKER
Item Nr: T0451.RTF
READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANEThe Bucker Jungmann, was originally a primary trainer for the Luftwaffe. An elegant, light machine, it weighed only 725 kg gross with lots of wing area, so it performed admirably on the 105 hp it was born with. It was such a good little trainer that Czechoslovakia, Switzerland and Spain all built the airplane under license, the Span-ish building them as late as the mid Sixties. The model combines unique design with top aerobatics.
TECHNICAL SPECIFICATIONS• Wingspan: 1400 mm• Length: 1200 mm• Wing area: 70,0 dm2
• Weight: 1980 g
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
RTF SOLUTIONS KIT CONTENTS• Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester fi lm. • Assembled landing gear• Pre-installed CYCLON "Brushless motor" with spinner and propeller• Pre-installed servos and pushrods adjusted• Pre-installed "Brushless ESC"• Pre-Cut and mounted canopy• Multi language assembly manual
REQUIRED FOR OPERATION• Battery 4S1P LiPo 3300 mAh• 4 Ch radio & receiver
Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner
Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells
Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)
BUCKER JUNGMANNJUNGMANN
08-39Cat2009(RTF).indd 3908-39Cat2009(RTF).indd 39 20-01-2009 20:57:5320-01-2009 20:57:53
4040
SKYSTAR IISKYSTAR IIIC powered high wing trainer
40-43Cat2009.indd 4040-43Cat2009.indd 40 20-01-2009 21:01:1120-01-2009 21:01:11
41
SKYSTAR IIAlmost reAdy to fly IC powered trAInerThe SkySTar rTF is an all balsa & ply al-most ready to fly trainer. Its lightweight but extremely strong construction makes this model perfect for the novice in r/C modelfly-ing. The wingspan of 1650mm and the large wing area gives this model excellent stability. The model is covered in a very attractive colour scheme for excellent orientation in the sky. The strong tricycle landing gear will withstand the hardest landings.
teChnICAl speCIfICAtIons• Wingspan: 1650 mm• Length: 1260 mm• Wing area: 48 dm2
• Weight: 2500 g• Motor: 2C .40-.46 IC engine 4C .52 IC engine
funCtIons• Rudder• Elevator• Ailerons• Motor
KIt Contentready built all balsa & ply fuselage, wing and panels, all parts are pre-covered in high quality polyester covering film, wheels, fuel tank, pre-bent landing gear, all necessary hardware, clear assembly instructions in English, German, Dutch and French.
requIred for operAtIon• 4-ch radio with 4 std size servos• 2C .40 size IC engine• Glowstart set #T0102.4• 5% plane fuelTHE BEST WAY TO GET STARTED WITH
IC POWERED AIRPLANES
Item Nr: T0352
40-43Cat2009.indd 41 21-01-2009 16:09:18
42
TOJEIRO 50IC powered F3A precision aerobatic airplane
40-43Cat2009.indd 4240-43Cat2009.indd 42 20-01-2009 23:07:5020-01-2009 23:07:50
43
TOJEIRO 50
Required for operation• 4-ch programmable radio• 5x High quality servos (min. 4kg)• Aircraft engine 2C .46 size• Glowstart set #T0102.4• Airplane fuel 20%
Technical specifi cations• Wingspan: 1325 mm• Length: 1400 mm• Wing area: 38,5 dm2
• Weight: 2,2 kg• Engine: 2C .40-.46 size 4C .52 size IC engine
Functions• Rudder• Elevator• Ailerons• Motor
ARTF COMPETITION AEROBATIC F3A AIR CRAFTIf you want the best: TOJEIRO.The TOJEIRO is designed by 3 members of the Belgium F3A World Championship team. The model is built to the highest demands of todays F3A competiton.The fully symmetrical airfoil is modifi ed and improved to suit the extremely dif-fi cult patterns. The fuselage has a large surface to perform better knife-edge ma-noeuvres. The overall aerodynamic shape of the model produces the necessary drag to slow down in vertical downlines. The torsion free wooden fuselage guarantees extreme precision in all fl ying positions.We experienced that the overall weight is extremely important to achieve a top performing model with a constant speed ability.At PROTECH we are convinced that it is possible to produce a wooden F3A model that will outperform all composite construction models on weight, stiffness and precision.
KIT CONTENTReady built balsa and plywood fuselage and tail, balsa sheeted lightweight sty-rofoam wing pan els*, pre-cov ered with Oracover® polyester fi lm. Pre-painted fibreglass mo tor cowl ing, pre-paint ed fi breglass wheel pants, fi breglass landing gear, wheels, fuel tank, en gine mount, ac- ces so ries and clear build ing in struc tions in Eng lish, Ger man, French and Dutch.
FUNCTIONS• Rudder• Elevator• Ailerons• Motor
Item Nr: T0405
40-43Cat2009.indd 4340-43Cat2009.indd 43 20-01-2009 23:09:2720-01-2009 23:09:27
12V DC Automatic Li-PoBattery Charger and 230V Power Supply
Item Nr: T0512.35M1 35 MHz MODE 1 T0512.35M2 35 MHz MODE 2 T0512.41M1 41 MHz MODE 1 T0512.41M2 41 MHz MODE 2 T0512.35M1 UK 35 MHz MODE 1 T0512.35M2 UK 35 MHz MODE 2
HELIXXLONG RANGER
Professional 4-channel FM radio control system with servo reverse function,
charging socket and socket for fl ightsimulators High Power Li-Po Batterypack 800mAh - 7,4V
44
44-57Cat2009.indd 4444-57Cat2009.indd 44 20-01-2009 21:17:0820-01-2009 21:17:08
12V DC Automatic Li-PoBattery Charger and 230V Power Supply
45
HELIXX3DItem Nr:
T0511.35M1 35 MHz MODE 1 T0511.35M2 35 MHz MODE 2 T0511.41M1 41 MHz MODE 1 T0511.41M2 41 MHz MODE 2 T0511.35M1 UK 35 MHz MODE 1 T0511.35M2 UK 35 MHz MODE 2
Professional 4-channel FM radio control system with servo reverse function,
charging socket and socket for fl ightsimulatorsHigh Power
Li-Po Batterypack 800mAh - 7,4V
44-57Cat2009.indd 4544-57Cat2009.indd 45 20-01-2009 21:17:1520-01-2009 21:17:15
46
ZOOM 425 SERIES
FEATURES
• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 30A BRUSHLESS ESC (installed)
T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK for ZOOM 425. The pack includes: 4x B205 micro servos, NT-410 Heading Lock gyro and a Micro 6 FM receiver
EVO18003S1PLi-Po batterypack 11,1V 3 cells 1800mAh
REQUIRED FOR OPERATION
ZOOM 425 ARF#T0520
• 6 CH TRANSMITTER with CCPM mixing function
PRO.306-35 (35MHz)PRO.306-40 (40-41MHz)6-Channel micro receiver with fail-safe function
FEATURES
• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 30A BRUSHLESS ESC (installed)• 4x HIGH PRECISION DIGITAL SERVOS (installed)• HEADING HOLD GYRO (installed)
EVO18003S1PLi-Po batterypack 11,1V 3 cells 1800mAh
REQUIRED FOR OPERATION
ZOOM 425 RTF#T0520.RTF
• 6 CH TRANSMITTER with CCPM mixing function
44-57Cat2009.indd 4644-57Cat2009.indd 46 20-01-2009 21:17:1820-01-2009 21:17:18
47
ZOOM 450 SERIES
T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK
T0502.500POWER SET : brush-less motor, 30A ESC, FLIGHTPOWER 2170mAh 11,1V Li-Po batterypack
FEATURES
• 90% ASSEMBLED AIRFRAME
REQUIRED FOR OPERATIONT0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK
EVO25-2170-3SLi-Po batterypack 11,1V 3 cells 2170mAh
FEATURES
• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 40A BRUSHLESS ESC (installed)
REQUIRED FOR OPERATION
FEATURES
• 90% ASSEMBLED AIRFRAME• BRUSHLESS MOTOR (installed)• 40A BRUSHLESS ESC (installed)• 4x DIGITAL SERVOS (installed)• HEADING HOLD GYROREQUIRED FOR OPERATION
EVO25-2170-3SLi-Po batterypack 11,1V 3 cells 2170mAh
T0503.350 (35MHz)T0503.400 (40-41MHz)ELECTRONICS PACK
FEATURES
• 90% ASSEMBLED AIRFRAME• SX-12 HELI ENGINE (included)
REQUIRED FOR OPERATION
FEATURES
• 90% ASSEMBLED AIRFRAME• SX-12 HELI ENGINE (included) • 5x HIGH PRECISION SERVOS (installed)• HEADING HOLD GYRO
ELEC
TRIC
IC P
OW
ERED
PRO.306-35PRO.306-40 6-Channel micro receiver with fail-safe function
PRO.306-35PRO.306-40 6-Channel micro receiver with fail-safe function
REQUIRED FOR OPERATION
ZOOM 450 EP#T0502
ZOOM 450 EP ARF#T0502.ARF
ZOOM 450 EP RTF#T0502.RTF
ZOOM 450 IC#T0503
• • •6 CH TRANSMITTER with CCPM
mixing is required for all ZOOM 450All ZOOM 450 IC models require
starting equipment• • •
ZOOM 450 IC RTF#T0503.RTF
44-57Cat2009.indd 4744-57Cat2009.indd 47 20-01-2009 21:17:2620-01-2009 21:17:26
EP powered 3D helicopter
3D MICRO EP
HELICOPTERS
SET TO
A NEW LEVEL
48
ZOOM 425ZOOM 425
44-57Cat2009.indd 4844-57Cat2009.indd 48 20-01-2009 21:17:4220-01-2009 21:17:42
KIT CONTENTS• 90% assembled airframe• Brushless outrunner motor• Brushless ESC 30A• Wooden main rotor blades• Canopy• Multi-coloured decalsheet• English, Dutch, German and French
instruction manualTECHNICAL SPECIFICATIONS• Rotor Ø: 710 mm• Weight: 650 g• Motor: brushless motor• Batteries: 3 cells Li-Po (11,1V)FUNCTIONS• Pitch axis• Roll• Nick• Tail rotor• Motorspeed
ALMOST READY TO FLY ELECTRIC MICRO HELICOPTERThe Zoom 425 is the (r)evolution of the legendary Zoom 400: It now has al of his strengths and none of its weaknesses. The chassis is stronger because of its G10 structure, the tail system totally reli-able thanks to the belt driven tail and the control system up to date with the 120° CCPM system. The Zoom 425 also fea-tures ball bearings on every moving part, ultra tough landing gear, rear mounted tail servo and brushless motor and speed controller as standard. Time to take this micro helicopter seriously...The ZOOM 425 EP is supplied 90% as-sembled. Brushless motor and ESC in-cluded
REQUIRED FOR OPERATION• 6-Ch computer radio w/ ccpm mix• Electronics pack 35 MHz #T0502.350 • Electronics pack 40-41 MHz #T0502.400• Li-Po batterypack 11,1V 3 cells 1800mAh
• Lightweight G10 chassis• Fully ballraced• 120° CCPM• Belt driven tail• Constant driven tail• Heavy duty center hub• Ball raced see-saw• Alloy motor mount
Item Nr: T0520
T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK for ZOOM 450. The pack includes: 4x B205 precision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver
BRUSHLESS MOTOR + BRUSHLESS MOTOR + 30A ESC INCLUDED
30A ESC INCLUDED
49
ZOOM 425
44-57Cat2009.indd 4944-57Cat2009.indd 49 20-01-2009 21:17:4820-01-2009 21:17:48
EP powered 3D helicopter
Designed to be
a class leading
3D micro machine
50
ZOOM 450 EPZOOM 450 EP
44-57Cat2009.indd 5044-57Cat2009.indd 50 20-01-2009 21:18:0720-01-2009 21:18:07
KIT CONTENTS• 90% assembled airframe• Wooden main rotor blades• Blowmoulded canopy• Multi-coloured decalsheet• English, Dutch, German and French
instruction manualTECHNICAL SPECIFICATIONS• Rotor Ø: 770-810mm• Weight: 750 g• Motor: brushless motor• Batteries: 3 cells Li-Po (11,1V)FUNCTIONS• Pitch axis• Roll• Nick• Tail rotor• Motorspeed
ALMOST READY TO FLY ELECTRIC MICRO HELICOPTERWhen you buy a 3D micro helicopter, you want one that doesn’t need a whole lot of upgrades. You want a 3D micro helicop-ter that performs straight out of the box, even for the most demanding extreme pilots. The ZOOM 450 bundles all the popular features in one lightweight pack-age. The frame is built up from rigid G10 frames and offers ample room for bat-tery and radio components. Tail power is transferred by belt for low maintenance and improved effi ciency. Control inputs from the 120° CCPM control system are translated to the 350mm blades thanks to the standard metal headblock.The ZOOM 450 EP is supplied 90% as-sembled. Electronics and Power Set are not included.
REQUIRED FOR OPERATION• 6-Ch computer radio w/ ccpm mix• Electronics pack 35 MHz #T0502.350 • Electronics pack 40-41 MHz #T0502.400 • Power set #T0502.500
ZOOM 450 EPItem Nr: T0502
T0502.500A special POWER SET is available to provide the ZOOM 450 with ballistic power. The set includes: 350W outrunner brushless motor, 30A ESC and a FLIGHTPOWER 2150mAh 11,1V Li-Po batterypack
T0502.350 (35MHz)T0502.400 (40-41MHz)ELECTRONICS PACK for ZOOM 450. The pack includes: 4x B205 precision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver
Designed by D. Franckx
51
• Lightweight G10 chassis• Fully ballraced• 120° CCPM• Belt driven tail
• Constant driven tail• Alloy center hub• Alloy ball raced see-saw• Alloy motor mount
44-57Cat2009.indd 5144-57Cat2009.indd 51 20-01-2009 21:18:1520-01-2009 21:18:15
IC powered 3D helicopter
the first 3D
ic powered
micro helicopter
52
ZOOM 450 ICZOOM 450 IC
44-57Cat2009.indd 5244-57Cat2009.indd 52 20-01-2009 21:18:3420-01-2009 21:18:34
Item Nr: T0503
53
ZOOM 450 IC
KIT CONTENT• 90% assembled airframe• Wooden main rotor blades• Pre-cut blowmoulded canopy• SX-12 engine w/ muffl er• Multi-coloured decalsheet• English, Dutch, German and French
instruction manualTECHNICAL SPECIFICATIONS• Rotor Ø: 770-810 mm• Weight: 900 g• Motor: SX-12 IC engine
ALMOST READY TO FLYIC POWERED MICRO HELICOPTERThis is what you get when you give a micro helicopter a nitro boost: The Zoom 450 IC. It has all the nice features of the Zoom 450 but is equipped with a SX-12 engine which gives you the same nitro rush associated with bigger helicopters. The Zoom 450 IC makes it possible to enjoy the sound and feel of a 3D nitro helicopter in your own backyard.
FUNCTIONS• Pitch axis• Roll• Nick• Tail rotor• Motorspeed
T0503.350 (35MHz)T0503.400 (40-41MHz)ELECTRONICS PACK for ZOOM 450 IC. The pack includes: 5x B205 pre-cision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver
• Lightweight G10 chassis• Fully ballraced• 120° CCPM• Belt driven tail• Constant driven tail• Alloy center hub• Alloy ball raced see-saw• SX-12 heli engine
SX-12 heli engineincluded
REQUIRED FOR OPERATION• 6-Ch computer radio w/ ccpm mix• Electronics pack 35 MHz #T0502.350• Electronics pack 40-41 MHz #T0502.400• Protech Daytona 16% nitro fuel• 4,8V RX battery pack• Hex starter shaft #T0184• Starter #T0141
44-57Cat2009.indd 5344-57Cat2009.indd 53 20-01-2009 21:18:4120-01-2009 21:18:41
54
T0502.082Carbon fi bre main rotor blades 350mmFits Zoom 450 EP & IC
T502.205Carbon fi bre lower frame setFits Zoom 450 EP
T0502.083Carbon fi bre tail boomFits Zoom 450 EP & IC
T0502.206Carbon fi bre upper frame setFits Zoom 450 EP
T0520.200Carbon fi bre tail boomFits Zoom 425 EP
T0502.204Carbon fi bre tail fi n setFits Zoom 450 EP & IC
T0502.209Carbon fi bre chassis reinforcementFits Zoom 450 EP
T0520.204Carbon fi bre tail fi n setFits Zoom 425 EP
T0503.205Carbon fi bre lower frame setFits Zoom 450 IC
T0503.206Carbon fi bre upper frame setFits Zoom 450 IC
T0520.205Carbon fi bre lower frame setFits Zoom 425 EP
T0520.206Carbon fi bre upper frame setFits Zoom 425 EP
T0502.210Aluminium CNC machined rotor grip setFits Zoom 425 EP - 450 EP - 450 IC
T0502.211Aluminium CNC machined fl ybar control system. Fits Zoom 450 EP - 450 IC
T0520.201Carbon fi bre main rotor blades 315mmFits Zoom 425 EP
OPTION PARTS
FOR ZOOM 425 & 450
SERIES
T0502.233 Pinion gear 12T, 2 pcsT0502.234 Pinion gear 13T, 2 pcsT0502.235 Pinion gear 14T, 2 pcsT0502.236 Pinion gear 15T, 2 pcsT0502.237 Pinion gear 16T, 2 pcs
T0502.239One piece aluminium motor mount, fi ts Zoom 450 EP
44-57Cat2009.indd 5444-57Cat2009.indd 54 20-01-2009 21:18:4720-01-2009 21:18:47
55
up to .60 size up to .90 size
T0502.212Aluminium CNC machined see-saw setFits Zoom 425 EP - 450 EP - 450 IC
T0502.213Aluminium CNC machined wash-out base set. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.214Aluminium CNC machined wash-out base arm set. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.215Aluminium CNC machined linkage arm set. Fits Zoom 425 EP - 450 IC
T0502.216Aluminium CNC machined swashplate. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.217Aluminium CNC machined tail bearing mount. Fits Zoom 450 IC
T0502.222Aluminium engine washer set, 10pcs.Fits Zoom 450 IC
T0502.227Aluminium CNC machined tail rotor grip set. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.218Aluminium CNC machined tail boom mount set. Fits Zoom 450 IC
T0502.223Aluminium main frame washer set, 20pcs.Fits Zoom 425 EP - 450 EP - 450 IC
T0502.228Alu. CNC mach. 3D main center block 4-O rings. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.219Aluminium CNC machined tail gear case. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.224Aluminium main frame holder 4,5X25, 10pcs. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.229Alu. CNC mach. main shaft bearing block. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.220Aluminium CNC machined tail pitch lever. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.225Aluminium main frame holder 4,5X45, 10pcs. Fits Zoom 425 EP - 450 EP - 450 IC
T0502.221Precision tail pitch yoke setFits Zoom 425 EP - 450 EP - 450 IC
T0502.226Aluminium main frame holder 4,5X8,5, 20pcs. Fits Zoom 425 EP - 450 EP - 450 IC
44-57Cat2009.indd 5544-57Cat2009.indd 55 20-01-2009 21:19:0120-01-2009 21:19:01
RUNNER XBRUNNER XBIC powered racing buggy
1/10 SCALE4WD 3DIFF
BIGGER, STRONGER, FASTER
56
56-65Cat2009.indd 5656-65Cat2009.indd 56 21-01-2009 01:03:0321-01-2009 01:03:03
REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells • Nitro starter set
1/10 SCALE1/10 SCALE4WD 3DIFF4WD 3DIFF
TECHNICAL SPECIFICATIONSLength 430 mmWidth 280 mmHeight 205 mmWheelbase 300 mmWeight 2580 g
SX-
18 P
ULL START ENGINE INCLUDED
PULL E INCLLLLLLLLLLLLLUUUUUUUUUUUUUUUDECCCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUUUUUU
FEATURES• 100% Pre-built• PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset• Painted & trimmed body• 20 Sealed ball bearings• Countersunk alu. T6 chassis• CVD universal joints front• 3 Diff. with steel plan e tary gears• Metal spiral bevel gears & pinions• Fibreglass disc brake• 2-Shoe racing clutch• 4 “Big Bore” hydraulic constant
volume shock absorbers• Nylon moulded side guards• Dustproof injection moulded radio-
gear box• Adjustable wing mount• Racing tuned pipe & manifold• High grip off-road tyres (1/8th
style)
RUNNER XB RTRRRRRRRRRTTTTTTTTRRRRRRRR
READY TO RUN 1/10 SCALE IC POWERED RACING BUGGYThis is the 4WD off road buggy you’ve been waiting for! Completely factory as-sembled with a high torque .18 pull start engine and matched tuned exhaust sys-tem you’ll be ready to race in no time! The sturdy aluminium chassis holds preinstalled engine, R/C equipment, ser-vos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!
COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio
Item Nr: Combo set T0870.2
57
56-65Cat2009.indd 5756-65Cat2009.indd 57 21-01-2009 00:56:5321-01-2009 00:56:53
RUNNER MTRUNNER MT
1/10 SCALE4WD 3DIFF
BIGGER
, STRONGE
R, FASTER
IC powered racing buggy
58
56-65Cat2009.indd 5856-65Cat2009.indd 58 21-01-2009 00:57:0321-01-2009 00:57:03
REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells • Nitro starter set
1/10 SCALE1/10 SCALE4WD 3DIFF4WD 3DIFF
TECHNICAL SPECIFICATIONSLength 430 mmWidth 280 mmHeight 205 mmWheelbase 300 mmWeight 2580 g
SX-
18 P
ULL START ENGINE INCLUDED
PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDECCCCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUUUUUUU
FEATURES• 100% Pre-built• PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset• Painted & trimmed body• 20 Sealed ball bearings• Countersunk alu. T6 chassis• CVD universal joints front• 3 Diff. with steel plan e tary gears• Metal spiral bevel gears & pinions• Fibreglass disc brake• 2-Shoe racing clutch• 4 “Big Bore” hydraulic constant
volume shock absorbers• Nylon moulded side guards• Dustproof injection moulded radio-
gear box• Racing tuned pipe & manifold• High grip off-road tyres (1/8th
style)
RUNNER MT RTRRRRRRRRRTTTTTTTTRRRRRRRR
READY TO RUN 1/10 SCALE IC POWERED RACING TRUGGYThis is the 4WD off road truggy based on the RUNNER XB. Completely factory assembled with a high torque .18 pull start engine and matched tuned exhaust system you’ll be ready to race in no time! The sturdy aluminium chassis holds preinstalled engine, R/C equipment, ser-vos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!
COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio
Item Nr: Combo set T0880.2
59
56-65Cat2009.indd 5956-65Cat2009.indd 59 21-01-2009 00:57:0821-01-2009 00:57:08
RADICAL MTRADICAL MT
1/10 SCALE4WD 2SPEED
IC powered monster truck
2-SPEED2-SPEED GEARBOX INCLUDED
GEARBOX INCLUDED
60
56-65Cat2009.indd 6056-65Cat2009.indd 60 21-01-2009 00:57:2021-01-2009 00:57:20
REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells• Nitro starter set
1/10 SCALE1/10 SCALE4WD 2SPEED4WD 2SPEED
TECHNICAL SPECIFICATIONSLength 500 mmWidth 375 mmHeight 190 mmWheelbase 330 mmWeight 3300 g
SX-
18 P
ULL START ENGINE INCLUDED
PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDECCCCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUUUUUUU
FEATURES• 100% Pre-built• PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset• Painted & trimmed body• 20 Sealed ball bearings• Countersunk alu. T6 chassis• CVD universal joints front• 3 Diff. with steel plan e tary gears• Metal spiral bevel gears & pinions• Fibreglass disc brake• 2-Shoe racing clutch• 4 “Big Bore” hydraulic constant
volume shock absorbers• Nylon moulded side guards• Dustproof injection moulded radio-
gear box• Racing tuned pipe & manifold• High grip off-road tyres
RADICAL MT RTRRRRRRRRRTTTTTTTTRRRRRRRR
READY TO RUN 1/10 SCALE IC POWERED MONSTER TRUCKIf you are looking for the ultimate Fun Factor, the RADICAL MT is absolutely right for you. Completely factory as-sembled with a high torque .18 pull start engine and matched tuned exhaust sys-tem.The sturdy aluminium chassis holds preinstalled engine, R/C equipment, ser-vos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!
COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio
Item Nr: Combo set T0890.2
61
56-65Cat2009.indd 6156-65Cat2009.indd 61 21-01-2009 00:57:2521-01-2009 00:57:25
YADA STYADA STIC powered racing buggy
1/8 SCALE4WD
62
WHILE
OUR
COMPE
TITOR
S
ARE
MAKING
TOY
RTR
CAR
S
we Ar
e bu
ilding
RTR
RACIN
G CA
RS!
56-65Cat2009.indd 6256-65Cat2009.indd 62 21-01-2009 00:57:3721-01-2009 00:57:37
REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells• Nitro starter set
1/8 SCALE1/8 SCALE4WD4WD
63
TECHNICAL SPECIFICATIONSLength 485 mmWidth 305 mmHeight 160 mmWheelbase 334-340 mmWeight 3400 g
SX-
21 P
ULL START ENGINE INCLUDED
PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDDEDCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUUUUU
FEATURES• 100% Pre-built• PROTECH SX-21 pull start engine • 2-Channel steering wheel radioset• High torque servos• Painted & trimmed body• 22 Sealed ball bearings• Ball type front suspension• Countersunk alu. T6 chassis• Aluminium T6 radio plate• Aluminium T6 shock stays• CVD universal joints front• 3 Diff. with steel plan e tary gears• Steel spiral bevel gears & pinions• Steel main gear • Double disc brake• 3-Shoe racing clutch• 4 Hydraulic constant volume shock
absorbers• Nylon moulded side guards• Dustproof receiver box• Adjustable wing mount• Racing tuned pipe & manifold• High grip off-road tyres
YADA ST RTRRRRRRRRRTTTTTTTTRRRRRRRR
READY TO RUN 1/8 SCALE IC POWERED RACING BUGGYWhen you buy an RTR nitro buggy, you want one that doesn’t need a whole lot of upgrades. You want a buggy that performs straight out of the box even at competition level. The YADA ST RTR is engineered to handle and built to take it. With the YADA ST RTR you can feel how a top level 1/8 buggy handle, the perfect steering and balanced suspension will amaze you.
COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio
Item Nr: Combo set T30.2
56-65Cat2009.indd 6356-65Cat2009.indd 63 21-01-2009 00:57:4821-01-2009 00:57:48
YADA TRRYADA TRRIC powered racing truggy
64
56-65Cat2009.indd 6456-65Cat2009.indd 64 21-01-2009 00:57:5321-01-2009 00:57:53
65
REQUIRED FOR OPERATION• Daytona fuel 16% nitro 1L #D14161• 12x AA size penlight Ni-Cd cells• Nitro starter set
FEATURES• 100% Pre-built• PROTECH SX-26 pull start engine • 2-Channel steering wheel radioset• High torque servos• Painted & trimmed body• 22 Sealed ball bearings• Ball type front suspension• Countersunk alu. T6 chassis• Aluminium T6 radio plate• Aluminium T6 shock stays• CVD universal joints front• 3 Diff. with steel plan e tary gears• Steel spiral bevel gears & pinions• Steel main gear • Double disc brake• 3-Shoe racing clutch• 4 Hydraulic constant volume shock
absorbers• Dustproof receiver box• Adjustable wing mount• Racing tuned pipe & manifold• High grip off-road tyres
YADA TRR RTRRRRRRRRRTTTTTTTTRRRRRRRR
READY TO RUN 1/8 SCALE IC POWERED TRUGGYA truggy is a combination of a buggy and a monster truck. It has the handling and agility of a buggy and the smooth long travel suspension of a monster truck. The YADA TRR RTR is fully packed with features you fi nd on much more expen-sive racing truggyies. This Truggy per-forms out of the box without adding all expensive optionals.
Item Nr: Combo set T33.1 (Euro) Combo set T33.1UK (UK)
COMBO SET CONTENTS• Car 100% assembled with painted & trimmed body shell• 2-Channel pistol grip radio
TECHNICAL SPECIFICATIONSLength 550 mmWidth 450 mmHeight 180 mmWheelbase 368-372 mmWeight 3600 g
1/8 SCALE1/8 SCALE4WD4WD
SX-
26 P
ULL START ENGINE INCLUDED
PULL E INCLLLLLLLLLLLLUUUUUUUUUUUUUUUDDDEDCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLUUUUUUUUUUUU
56-65Cat2009.indd 6556-65Cat2009.indd 65 21-01-2009 00:57:5921-01-2009 00:57:59
AVENGER 4
4-CHANNEL FM DIGITAL PROPORTIONAL RADIO CONTROL SYSTEMModern styled 4 channel digital proportional radio control system suitable for all kind of indoor & parkfl y models as well for medium sized electric powered models.The radio features servo reverse function on all 4 channels, a charge socket and fl ightsimulator socket. The transmitter can be used as control system for the fl ight simulator REFLEX XTR, etc...The radio set is supplied with a long range 5 channel micro receiver and 3x B160 7.5g micro servos suitable for most small models.SET CONTENTS• 4 Channel transmitter• 5 Channel Micro receiver (long range)• 3 pcs Micro servos 7,5g B-160• 1 pair of crystals
REQUIRED FOR OPERATION• 8 x LR-6 size cells (TX)
Item Nr: T0221.35M1 35 MHz MODE 1 T0221.35M2 35 MHz MODE 2 T0221.41M1 41 MHz MODE 1 T0221.41M2 41 MHz MODE 2
66
R•
66-83cat2009.indd 6666-83cat2009.indd 66 20-01-2009 21:43:0220-01-2009 21:43:02
USBItem Nr: T0220
USB FLIGHT SIMULATOR CONTROLLERYou want to learn the first steps of flying RC airplanes or helicopters or you want to im-prove your skills? This USB flight simulator controller is the perfect and affordable solu-tion. Just connect the controller to one of the USB ports in your computer and install the supplied freeware FMS flight simulator.
KIT CONTENTS• USB controller• CD-rom with FMS software (Free bonus)
FLIGHT SIMULATORCONTROLLER
NOTICEThe FMS RC Flight Simulator software is supplied free of charge in this package. Updates on the FMS flight simulator can be downloaded from the internet (http://www.flying-model-simulator.com) Protech can not be held responsible for problems or damage caused by the instal-lation and use of this software.
MINIMUM SySTEM REqUIREMENTS FOR FMS RC FLIGHT SIMULATOR• Pentium 3 or AMD 800Mhz• Minimum 128MB RAM• 1GB free hard disk space• CD-Rom drive• DirectX compatible soundcard• 3D acceleration graphic card min. 32MB• Windows 98SE / 2000 / XP operating system with DirectX 7.0 or higher
67
66-83cat2009.indd 67 21-01-2009 01:24:35
68
PRO.303NT-420 micro heading hold gyro
Extreme tail holding power in a micro package! This gyro features transmit-ter/manual switchable heading hold and built-in drift cancel circuit.
Input voltage: 4,8V ~ 6.0VWeight: 5.7 gDimensions: 20x20x10mmGain: heading hold/standard
only 5.7 g
PRO.5-35 5-Ch. micro RX FM - 35 Mhz PRO.5-40 5-Ch. micro RX FM - 40 Mhz
5-Channel narrow band FM micro re-ceiver for indoor & parkfl yers or small models. Single conversion. Compatible with any radio brand. Normal crystals can be fi tted.
Channel: 5 chInput voltage: 3,5V ~ 7,0VWeight: 8 gDimensions: 31x17x9mmRange: full range
only 7g
B206DIGITAL Servo B-206 BB
Micro servo for use in the smallest models, indoor & parkfl yers, small electric powered helicopters.
Input voltage: 4,8V ~ 6,0VWeight: 11 g Dimensions: 20,8x20x12mmTorque: 2,5kg/cm @ 6,0VSpeed: 0,13s/60° @ 6,0V
B207DIGITAL Servo B-207 MG BB
Economy high torque ball raced stand-ard size servo for use in cars, boats and airplanes.
Input voltage: 4,8V ~ 6,0VWeight: 16 g Dimensions: 22,8x24,2x12mmTorque: 3,0 kg/cm @6,0VSpeed: 0,11s/60° @ 6,0V
T0270USB interface cable
USB interface cable connects almost all brands of transmitters to your PC for use with simulator software (not included), or use your transmitter as joystick with your preferred computer games.
Set includes adapters for FUTABA FF series (Square connector), FUTABA & HITEC Din, E-SKY / WALKERA / PROTECH mini Din
66-83cat2009.indd 6866-83cat2009.indd 68 20-01-2009 21:43:1020-01-2009 21:43:10
69
FLIGHTPACKS FLIGHTPACKS
B170-CServopack B170 (3pcs)Value servopack, buy 2 and get 1 free of charge.The B170 servo is perfectly suitable for indoor & parkfl ying models and small gliders. T0226.350 Flightpack 35 MHz
T0226.400 Flightpack 40 MHzT0226.410 Flightpack 41 MHzValue fl ightpack for indoor- & parkfl ying models containing a full range 6 channel micro receiver and 3 pcs of B170 7g micro servos.
T0225.350 Flightpack + Brushless ESC 18A, 35 MHzT0225.400 Flightpack + Brushless ESC 18A, 40 MHzT0225.410 Flightpack + Brushless ESC 18A, 41 MHzValue fl ightpack for indoor- & parkfl ying models containing a full range 6 channel micro receiver, 3 pcs of B170 7g micro servos and a Apollo brushless ESC 18A (2-3 Li-Po cells).
TECHNICAL SPECIFICATIONS B170 SERVOInput voltage: 4,8V ~ 6,0VWeight: 7 g Dimensions: 24x11x24 mmTorque: 1,4 kgSpeed: 0,12s/60°
TECHNICAL SPECIFICATIONS APOLLO ESC 18ANi-xx cells: 6-10 cellsLi-xx cells: 2-3 cellsCont. Amp: 18APeak Amp: 23ABEC: 5V 3A
66-83cat2009.indd 6966-83cat2009.indd 69 20-01-2009 21:43:2020-01-2009 21:43:20
7070
PRO.E18 Apollo brushless ESC 18A
Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2Brake: YesSoft start: YesContinuous current: 18APeak current: 23ABEC: 5V 3AWeight (incl. wires): 21 gDimensions: 47x22x7mm
PRO.E25 Apollo brushless ESC 25A
Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2-3Brake: YesSoft start: YesContinuous current: 25APeak current: 35ABEC: 5V 3AWeight (incl. wires): 23gDimensions: 47x22x7mm
PRO.E30 Apollo brushless ESC 30A Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2-3Brake: YesSoft start: YesContinuous current: 30APeak current: 40ABEC: 5V 3AWeight (incl. wires): 23gDimensions: 47x22x7mm
PRO.E40 Apollo brushless ESC 40A Input voltage: 5V ~ 12VNumber of cells: 6-10Number of Li-Po cells: 2-3Brake: YesSoft start: YesContinuous current: 40APeak current: 50ABEC: 5V 3AWeight (incl. wires): 23gDimensions: 47x22x7mm
PRO.E45 Apollo brushless ESC 45A
Input voltage: 6V ~ 22VNumber of cells: 6-16Number of Li-Po cells: 2-6Brake: YesSoft start: YesContinuous current: 45APeak current: 55ABEC: OPTOWeight (incl. wires): 30gDimensions: 70x22x7mm
PRO.E60 Apollo brushless ESC 60A
Input voltage: 6V ~ 22VNumber of cells: 6-16Number of Li-Po cells: 2-6Brake: YesSoft start: YesContinuous current: 60APeak current: 70ABEC: OPTOWeight (incl. wires): 33gDimensions: 70x22x7mm
PRO.E70 Apollo brushless ESC 70A
Input voltage: 6V ~ 22VNumber of cells: 6-16Number of Li-Po cells: 2-6Brake: YesSoft start: YesContinuous current: 70APeak current: 80ABEC: OPTOWeight (incl. wires): 33gDimensions: 70x22x7mm
Because of the great diversity in brushless motors on the market today, choosing a matching speed control-ler can be very diffi cult sometimes. That is why PROTECH has produced a series of multi-functional speed controllers that can be matched to virtually any existing brushless motor without elaborate setting up making them “plug and play”.
The APOLLO series come with 2 timing modes (2-5/18 degrees) and 1 frequency mode (8 kHz).
PRO.E-CARD Programming card Apollo ESC
Easy to use programming card to set-up your Apollo Brushless ESC without connecting the ESC to your receiver.
Select your preferred settings with the jumper connectors and connect the card to the ESC. All programming is automatically set.
66-83cat2009.indd 7066-83cat2009.indd 70 20-01-2009 21:43:2220-01-2009 21:43:22
7171
T0186Fail Safe unit
The PROTECH Fail-Safe unit is plugged in between your receiver and throttle servo. If the receiver detects an interferred signal, no signal or if the receiver battery voltage is low, the throttle servo will move to a preset position.
Dimensions: 35x14x8mmWeight: approx. 8gOperating voltage: 4,8~6,0 VFor AM and FM (PPM) use only
T0181Voltspy II
Ultra thin & lightweight on-board battery monitor for 4,8V and 6V RX-batterypacks.
Weight: 4 gDimension: 40x18x3mm
T0160Battery checker 4,8V & 6V
This handy unit measures the voltage of your RX batteries using a 400mA load. The readout is from a row of 10 LED’s. Switch selectable for 4 or 5 cell battery packs.
T0162Expanded scale voltmeter
An analog meter to measure the voltage of RX & TX batteries under a 300mA load. Supplied with plug in leads and probes.
T0219RX regulator for 2 lipo cells
Use your 2-cell Li-XX battery to pow-er your receiver and servos. 5 or 6V switchable output.
Dimensions: 20x30x7mmWeight: approx. 9gOutput current: 3AOutput voltage: 5~6,0 V
PRO.E35H Apollo brushless ESC40A Input voltage: 5V ~ 12VNumber of Li-Po cells: 2-3Brake: YesSoft start: NoContinuous current: 35APeak current: 40ABEC: 5V 3ATiming: AutoWeight (incl. wires): 30gDimensions: 47x22x7mm
PRO.E29-H Apollo brushless ESC 30A Input voltage: 5V ~ 12VNumber of Li-Po cells: 2-3Brake: ProgrammableSoft start: NoContinuous current: 30APeak current: 35ABEC: 5V 3ATimming: AutoWeight (incl. wires): 23gDimensions: 40x26x7mm
66-83cat2009.indd 7166-83cat2009.indd 71 20-01-2009 21:43:2720-01-2009 21:43:27
7272
BECBEC
BECBECBEC
FUTABAJR / HITECMPXFUTABAJR / HITEC
MPX
FUTABAJR / HITECMPX
FUTABA
JR / HITECMPX
FUTABA
JR / HITECMPX
FUTABA
JR / HITECMPX
FUTABA
JR / HITECMPX
FUTABA
JR / HITECMPX
FUTABA
JR / HITECMPX
PL010 Servo lead JR/HITEC, male
PL013.10 Extension lead 10cm JR/HITEC
PL011 Servo lead JR/HITEC, female
PL020 Servo lead FUTABA, male
PL021 Servo lead FUTABA, female
PL023.10 Extension lead 10cm FUTABA
PL013.50 Extension lead 50cm JR/HITEC
PL023.25 Extension lead 25cm FUTABA
PL013.100 Extension lead 100cm JR/HITEC
PL013.25 Extension lead 25cm JR/HITEC
PL023.50 Extension lead 50cm FUTABA
PL023.100 Extension lead 100cm FUTABA
PL030 BEC lead, male
PL031 BEC lead, female
PL033 Extension lead BEC
PL014 Y-lead JR/HITEC
PL024 Y-lead FUTABA
PL045 Switch universal FUTABA/JR/HITEC
PL035 Switch harness BEC
PL056 Charge lead Glowstart
PL016 Charge lead TX JR
PL057 Charging cable Dean connector
PL026 Charge lead TX FUTABA/HITEC
PL059 Charging cable universal RX + BEC
PL037 Charge lead BEC
PL058 Charging cable multi functional
PL017 Charge lead RX JR/HITEC
PL027 Charge lead RX FUTABA
PL052 Charge lead universal
PL053 Charge lead sealed lead acid batteries
JR / HITECFUTABA
66-83cat2009.indd 7266-83cat2009.indd 72 20-01-2009 21:43:3520-01-2009 21:43:35
7373
PL051 Charge lead TAMIYA
PL147 MPX connector MALE
PL148 MPX connector FEMALE
PL061 TX-battery lead JR
PL062 TX-battery lead FUTABA
PL055 Conversion lead TAMIYA - Mini Tamiya
PVC PVC PVC PVCPL074 Flexible PVC wire 1,0mm, 2x1m
SILICON SILICONPL080 Silicon wire 0,75mm, 2x1m
PL081 Silicon wire 1,5mm, 2x1m
PL071 Flexible PVC wire 0,25mm, 2x1m
PVC PVCPL075 Flexible PVC wire 1,5mm, 2x1m
PL076 Flexible PVC wire 2,5mm, 2x1m
PL073 Flexible PVC wire 0,75mm, 2x1m
PL072 Flexible PVC wire 0,50mm, 2x1m
SILICONSILICONSILICONSILICONPL083 Silicon wire 2,5mm, 2x1m
PL084 Silicon wire 2,5mm, 2x1m
PL082 Silicon wire 1,5mm, 2x1m
PL085 Silicon wire 4,0mm, 2x1m
SILICON
SILICONSILICON
SILICON
SILICONPL151 Tamiya female conn. w/ sil. wire 2,5mm
PL115 Tamiya Y lead. w/ sil. wire 2,5mm
PL150 Tamiya male conn. w/ sil. wire 2,5mm
PL054 Charge lead Tamiya special
SILICONSILICONPL152 AMP male conn. w/ sil. wire 2,5mm
PL153 AMP female conn. w/ sil. wire 2,5mm
PL265 BEC connectors, 1pair
PL266 BEC connector MALE, 5pcsPL268 BEC connector MALE, 25pcs
PL267 BEC connector FEMALE, 5pcsPL269 BEC connector FEMALE, 25pcs
PL255 DEANS connector FEMALE + Sil. wire2,5mm
PL256 DEANS connector MALE + Sil. wire2,5mm
SILICONSILICON
66-83cat2009.indd 7366-83cat2009.indd 73 20-01-2009 21:44:0920-01-2009 21:44:09
7474
PL121 G2 gold connectors, 2pair
PL122 G2 gold connectors, 5pair
PL123 G2 gold connectors, 50pair
PL131 G3.5 gold connectors, 2pair
PL132 G3.5 gold connectors, 5pair
PL125 G4 gold connectors, 2pair
PL126 G4 gold connectors, 5pair
PL127 G4 gold connectors, 50pair
PL230 G2 gold connectors, 2pcs
PL231 G2 gold connectors, 5pcs
G2 G2 G3.5G2G2
G4 G2 G2G4G4
PL133 G3,5 gold connectors, 50pair
G3.5
PL141 High power connector male, 2pcs
PL146 High power connector female, 25pcs
PL250 DEANS connector 1 pair
PL135 Battery Bars Gold Plated, 10pcs
PL251 DEANS connector MALE, 5pcsPL253 DEANS connector MALE, 25pcs
PL252 DEANS connector FEMALE, 5pcsPL254 DEANS connector FEMALE, 25pcs
PL260 Micro connector, setPL261 Micro connector, 5pcsPL262 Micro connector, 50pcs
PL140 High power connector, 1pair
PL143 High power connector male, 5pcs
PL145 High power connector male, 25pcs
PL144 High power connector female, 5pcs
PL142 High power connector female, 2pcs
PL235 G3,5 gold connectors, 2pcs
PL236 G3,5 gold connectors, 5pcs
PL237 G3,5 gold connectors, 25pcs
PL240 G4 gold connectors, 2pcs
PL241 G4 gold connectors, 5pcs
G3.5 G4 G4G3.5G3.5
G3.5
PL242 G4 gold connectors, 25pcs
G4
PL232 G2 gold connectors, 25pcs
G2
66-83cat2009.indd 74 21-01-2009 16:07:01
7575
PL160 TAMIYA motor connectors, 2sets
PL162 TAMIYA motor connectors, 50sets
PL161 TAMIYA motor connectors, 5sets
PL164 TAMIYA motor conn. + sil. wire, 1pair
PL171 Crocodile clips for bananaplugs, 1pair
PL172 Crocodile clips standard, 1pair
PL173 Banana plugs 4mm, 1pair
PL170 Car battery clips, 1pair
PL163 TAMIYA motor conn. + sil. wire, 1pair
PL100 MINI TAMIYA connector, 1pair
PL102 MINI TAMIYA connector female, 5pcs
PL101 MINI TAMIYA connector male, 5pcs
PL111 TAMIYA connector male, 5pcs
PL112 TAMIYA connector female, 5pcs
PL113 TAMIYA connector male, 50pcs
PL104 MINI TAMIYA connector female, 25pcs
PL114 TAMIYA connector female, 50pcs
PL110 TAMIYA connector, 1pair
PL103 MINI TAMIYA connector male, 25pcs
PL116 AMP connector, 1pair
PL117 AMP connector male, 5pcs
PL118 AMP connector female, 5pcs
PL119 AMP connector male, 50pcs
PL120 AMP connector female, 50pcs
66-83cat2009.indd 7566-83cat2009.indd 75 20-01-2009 21:45:0820-01-2009 21:45:08
7676
PL183 Heat shrink tubing 6mm, 2x25cm
PL184 Heat shrink tubing 9mm, 2x25cm
PL190 Heat shrink 46mm, 1m, orange
PL180 Heat shrink tubing 2mm, 2x25cm
PL181 Heat shrink tubing 3mm, 2x25cm
PL182 Heat shrink tubing 4mm, 2x25cm
PL191 Heat shrink 50mm, 1m, transp.
PL192 Heat shrink 70mm, 1m, red
PL193 Heat shrink 70mm, 1m, blue
PL195 Heat shrink 70mm, 1m, transp.
PL194 Heat shrink 91mm, 1m, transp
66-83cat2009.indd 7666-83cat2009.indd 76 20-01-2009 21:45:3420-01-2009 21:45:34
7777
66-83cat2009.indd 7766-83cat2009.indd 77 20-01-2009 21:45:4420-01-2009 21:45:44
• AC 220/230V input voltage
• 6-8 cells transmitter battery charge output. Charge current: 150mA
• Reverse polarity TX charging jack to suit every brand of radiosystem on the market.
• 4-5 cells receiver battery charge output. Charge current: 150mA
This 220/230V mains charg er is especially de signed to charge your transmitter and receiver bat ter ies over night. The charge current on both outputs is 150 mA.
RX -TX
Item Nr: T0242 Euro version T0242.UK UK version
CHARGER
78
SUITABLE FORSUITABLE FOR
ALL BRANDSALL BRANDS
66-83cat2009.indd 7866-83cat2009.indd 78 20-01-2009 21:45:4620-01-2009 21:45:46
• AC 220/230V input voltage
• 6-8 cells transmitter battery charge output. Charge current: 150mA
• Reverse polarity TX charging jack to suit every brand of radiosystem on the market.
• 4-5 cells receiver battery charge output. Charge current: 150mA
• BEC connector (RX output)
• 1,2V Glowstart battery charge output. Charge current: 200mA
• 7,2V Powerpack charge output. Charge current: 200mA
This multifunctional 220/230V mains adaptercharg er is especially de signed to charge 3 devices. You can charge your transmitter, receiver, glowstarter and 7,2V powerpack with the same charger.
MULTI
Item Nr: T0256 Euro version T0256.UK UK version
CHARGER 4
79
CHARGE UP TOCHARGE UP TO
4 DEVICES4 DEVICES
66-83cat2009.indd 7966-83cat2009.indd 79 20-01-2009 21:45:5120-01-2009 21:45:51
MULTI 6
• AC 220/230V input voltage
• For Ni-Cd, Ni-MH and Lead Acid batteries
• All six outputs can be used simultaneously
• LED display for each output
• Charge current output 50 - 60 - 80 - 140 - 180 - 500mA • Safety transformer
• Reverse polarity protection
• Fused AC input
The Multi Charger 6 is designed to charge Ni-Cd, Ni-MH and Lead acid batteries. You can se lect out of 6 out put ranges from 50 to 500 mA.
Item Nr: T0241 Euro version T0241.UK UK version
80
•
•
•
ALL 6 OUTPUTS CAN BE ALL 6 OUTPUTS CAN BE
USED SIMULTANEOUSLYUSED SIMULTANEOUSLY
66-83cat2009.indd 8066-83cat2009.indd 80 20-01-2009 21:45:5420-01-2009 21:45:54
• AC 220/230V & DC 12V input voltage
• For Ni-Cd & Ni-MH batteries
• Delta peak cut-off system (fast charge)
• Auto trickle charge
• Charging output RX & TX
• Outputs: Fast charge 6 - 8 cells 3000mA 7,2 - 9,6V
RX: 4 - 5 cells 150mA 4,8 - 6V
TX: 6-8 cells 150mA 7,2 - 9,6V
• Safety transformer
• Reverse polarity protection
• Fused AC input / DC output
The Mega Peak 3000 is the ideal Ni-Cd & Ni-MH battery charger for cars and elec tric glider pilots. The fast charg er is fully au to mat ic using a delta-peak cut off sys tem. With the RX and TX charg ing output you can charge your re ceiv er and trans mit ter bat ter ies.
MEGA PEAK
Item Nr: T0230 Euro version T0230.UK UK version
3000
81
UP TO 3A UP TO 3A
CHARGE CURRENTCHARGE CURRENT
66-83cat2009.indd 8166-83cat2009.indd 81 20-01-2009 21:46:0120-01-2009 21:46:01
• AC 220/230V & DC 12V input voltage
• For Ni-Cd & Ni-MH batteries
• Delta peak cut-off system (fast charge)
• Auto trickle charge
• LCD display
• Temperature sensor
• Outputs: Fast charge 4 - 8 cells (7,2 - 9,6V) AC: 0,1 to 4,5A DC: 0,1 to 5,5A RX: 4 - 5 cells 150mA 4,8 - 6V TX: 6-8 cells 150mA 7,2 - 9,6V
• Discharge function
• Reverse polarity protection
• Power switching supply
• Fused AC input / DC output
The Mega Peak 4500 charger is the ideal Ni-Cd & Ni-MH battery charger for car and electric glider pilots. The high power fast charger is fully automatic us-ing a delta-peak cut off system. The LCD display gives you accurate information about the selected charge current. The charger features a discharge function. With the RX and TX charge output you can charge your receiver and transmitter batteries simultaneously.
MEGA PEAK
Item Nr: T0258 Euro version T0258.UK UK version
4500
Magnetic temperature sensor prevents overcharging from Ni-MH batteries
82
•
•
UP TO 5,5A UP TO 5,5A
CHARGE CURRENTCHARGE CURRENT
66-83cat2009.indd 8266-83cat2009.indd 82 20-01-2009 21:46:0420-01-2009 21:46:04
8383
66-83cat2009.indd 8366-83cat2009.indd 83 20-01-2009 23:36:0720-01-2009 23:36:07
84
CNC-machined aluminium radial mount system* available
Large cooling slots for optimal heat transfer.
Adapts easily to existing fi rewall.*
Multiple fi xation possibilities.*
(*) radial mount system optional
84-91cat2009.indd 8484-91cat2009.indd 84 20-01-2009 21:48:3020-01-2009 21:48:30
Ref. nr. VoltageRange
NbLi-Po
RPM/V Dimensions(mm)
Weight(g)
Shaft diameter(mm)
Max. load current
(A/60sec.)
Max. power(W/60sec.)
Max. thrust (kg)
Propeller
MC28-2225 7,2-11,1V 2-3 1460 Ø28x22 26g Ø 3,2mm 8A 85W 0,32kg 8x4,3MC28-2227 6-7,4V 2 1380 Ø28x22 26g Ø 3,2mm 7A 55W 0,38kg 8x4,3MC28-2609 6-7,4V 2 1850 Ø28x26 41g Ø 3,2mm 16A 115W 0,85kg 9x4,7MC28-2612 7,4 - 11,1V 2-3 1410 Ø28x26 41g Ø 3,2mm 14A 155W 0,65kg 8x6MC28-2614 7,4 - 11,1V 2-3 1260 Ø28x26 41g Ø 3,2mm 12A 130W 0,60kg 9x6MC28-3009 7,4 - 11,1V 2-3 1280 Ø28x30 54g Ø 3,2mm 18A 200W 0,85kg 8x6MC28-3012 7,4 - 11,1V 2-3 910 Ø28x30 54g Ø 3,2mm 14A 155W 0,80kg 9x6MC35-3010 7,4 - 11,1V 2-3 1350 Ø35x30 75g Ø 4mm 25A 275W 1,20kg 10x6MC35-3605 7,4 - 11,1V 2-3 1430 Ø35x36 105g Ø 4mm 42A 465W 1,30kg 10x6MC35-3606 7,4 - 11,1V 2-3 1200 Ø35x36 105g Ø 4mm 38A 420W 1,20kg 10x6MC42-4010 7,2-14,8V 2-4 950 Ø42x40 130g Ø 5mm 34A 500W 1,80kg 11x5,5MC42-5007 11,1-18,5V 3-5 700 Ø42x50 195g Ø 5mm 43A 795W 2,10kg 12x8MC42-6005 11,1-18,5V 3-5 700 Ø42x60 260g Ø 5mm 46A 850W 2,50kg 12x8MC50-5506 11,1-18,5V 3-5 730 Ø50x55 290g Ø 6mm 58A 1070W 3,50kg 12x6,5MC50-5508 14,8-18,5V 4-5 550 Ø50x55 290g Ø 6mm 55A 1020W 3,10kg 15x8MC50-6507 14,8-22,2V 4-6 420 Ø50x65 387g Ø 6mm 60A 1330W 4,20kg 16x8MC50-6509 14,8-25,9V 4-7 325 Ø50x65 387g Ø 6mm 50A 1295W 4,60kg 17x8
85
MC28-2225
Max Power:85WKV:
1460 rpm/vWeight:
26 g
MC28-2227
Max Power:55 WKV:
1380 rpm/vWeight:
26 g
MC28-2609
Max Power:115 W
KV: 1850 rpm/v
Weight:41 g
MC28-2612
Max Power:155 W
KV: 1410 rpm/v
Weight:41 g
MC28-2614
Max Power:130 W
KV: 1260 rpm/v
Weight:41 g
MC28-3009
Max Power:200 W
KV: 1280 rpm/v
Weight:54 g
MC28-3012
Max Power:155 W
KV: 910 rpm/vWeight:
54 g
MC35-3010
Max Power:275 W
KV: 1350 rpm/v
Weight:75 g
MC35-3605
Max Power:465 W
KV: 1430 rpm/v
Weight:105 g
MC35-3606
Max Power:420 W
KV: 1200 rpm/v
Weight:105 g
MC42-4010
Max Power:500 W
KV: 950 rpm/vWeight:130 g
MC42-5007
Max Power:795 W
KV: 700 rpm/vWeight:195 g
MC42-6005
Max Power:850 W
KV: 700 rpm/vWeight:260 g
MC50-5506
Max Power:1070 W
KV: 730 rpm/vWeight:290 g
MC50-5508
Max Power:1020 W
KV: 550 rpm/vWeight:290 g
MC50-6507
Max Power:1330 W
KV: 420 rpm/vWeight:387 g
MC50-6509
Max Power:1295 W
KV: 325 rpm/vWeight:387 g
RADIAL MOUNT SYSTEMFor 28 series: MC28-100For 35 series: MC35-100For 42 series: MC42-100For 50 series: MC50-100
84-91cat2009.indd 8584-91cat2009.indd 85 20-01-2009 21:48:3620-01-2009 21:48:36
86
Ref. nr. Description (1 pc)PH8060 Hyperdrive propeller 8x6PH9075 Hyperdrive propeller 9x7,5PH1080 Hyperdrive propeller 10x8
Ref. nr. Description (1 pc)PI2508 Indoor prop direct drive 2,5x0.8PI2510 Indoor prop direct drive 2,5x1PI3020 Indoor prop direct drive 3x2PI3030 Indoor prop direct drive 3x3PI4025 Indoor prop direct drive 4x2,5PI4040 Indoor prop direct drive 4x4PI4530 Indoor prop direct drive 4,5x3PI4540 Indoor prop direct drive 4,5x4PI5030 Indoor prop direct drive 5x3PI5043 Indoor prop direct drive 5x4.3PI6030 Indoor prop direct drive 6x3PI7035 Indoor prop direct drive 7x3,5PI8040 Indoor prop direct drive 8x4PI9050 Indoor prop direct drive 9x5PI1060 Indoor prop direct drive 10x6PI1170 Indoor prop direct drive 11x7PI1280 Indoor prop direct drive 12x8
Ref. nr. Description (1 pc)PS6050 Slow fl y propeller for geared motors 6x5PS7060 Slow fl y propeller for geared motors 7x6PS8043 Slow fl y propeller for geared motors 8x4,3PS8060 Slow fl y propeller for geared motors 8x6PS9047 Slow fl y propeller for geared motors 9x4,7PS9070 Slow fl y propeller for geared motors 9x7PS1047 Slow fl y propeller for geared motors 10x4,7PS1080 Slow fl y propeller for geared motors 10x8PS1147 Slow fl y propeller for geared motors 11x4,7PS1180 Slow fl y propeller for geared motors 11x8PS1260 Slow fl y propeller for geared motors 12x6PS1280 Slow fl y propeller for geared motors 12x8PS1365 Slow fl y propeller for geared motors 13x6,5PS1390 Slow fl y propeller for geared motors 13x9PS1470 Slow fl y propeller for geared motors 14x7PS1410 Slow fl y propeller for geared motors 14x10PS1575 Slow fl y propeller for geared motors 15x7,5PS1510 Slow fl y propeller for geared motors 15x10
A range of propellers designed for small and slowfl y electric powered models. The shape of the extra thin blades is developed to guarantee optimum perform-ance and low power consumption. The propellers are made from glass reinforced nylon for extra strength and can be used up to 7000 rpm/min.
MA940Motor mount set MEGAX 300
MA941Motor mount set MEGAX 400
MA942Motor mount set MEGAX 500-600
PS9070-3BLSlowfl y 3-bladed propeller for geared motors 9x7
PS1080-4BLSlowfl y 4-bladed propeller for geared motors 10x8
84-91cat2009.indd 8684-91cat2009.indd 86 20-01-2009 21:48:4620-01-2009 21:48:46
87
MA800Collet prop adapter for 2mm shaft M5, 1pc
MA801Collet prop adapter for 2,3mm shaft M5, 1pc
MA802Collet prop adapter for 3mm shaft M5, 1pc
MA803Collet prop adapter for 3,2mm shaft M5, 1pc
MA804Collet prop adapter for 4mm shaft M6, 1pc
MA805Collet prop adapter for 5mm shaft M6, 1pc
MA806Collet prop adapter for 5mm shaft M8, 1pc
MA807Collet prop adapter for 6mm shaft M8, 1pc
MA814Screw type adapter for 4mm shaft M8, 1pc
MA815Screw type adapter for 5mm shaft M8, 1pc
MA816Screw type adapter for 5mm shaft M10, 1pc
MA817Screw type adapter for 6mm shaft M10, 1pc
MA812Screw type adapter for 2,3mm shaft M8, 1pc
MA811Screw type adapter for 3,2mm shaft M6, 1pc
MA813Screw type adapter for 3,2mm shaft M8, 1pc
MA810Screw type adapter for 2,3mm shaft M6, 1pc
Ref. nr. DescriptionMA810 Screw type propeller adapter for 2,3mm shaft M6, 1pcMA812 Screw type propeller adapter for 2,3mm shaft M8, 1pcMA811 Screw type propeller adapter for 3,2mm shaft M6, 1pcMA813 Screw type propeller adapter for 3,2mm shaft M8, 1pcMA814 Screw type propeller adapter for 4,0mm shaft M8, 1pcMA815 Screw type propeller adapter for 5,0mm shaft M8, 1pcMA816 Screw type propeller adapter for 5,0mm shaft M10, 1pcMA817 Screw type propeller adapter for 6,0mm shaft M10, 1pc
Ref. nr. Description Spare colletMA840 Precision aluminium spinner Ø30mm for 2,3mm shaft, 1pc MA840.1MA841 Precision aluminium spinner Ø30mm for 3,0mm shaft, 1pc MA841.1MA842 Precision aluminium spinner Ø30mm for 3,2mm shaft, 1pc MA842.1MA843 Precision aluminium spinner Ø40mm for 3,0mm shaft, 1pc MA843.1MA844 Precision aluminium spinner Ø40mm for 3,2mm shaft, 1pc MA844.1MA845 Precision aluminium spinner Ø40mm for 4,0mm shaft, 1pc MA845.1MA846 Precision aluminium spinner Ø40mm for 5,0mm shaft, 1pc MA846.1
Spare collets see list below
Fits GRAUPNER* blades
Ref. nr. Description Slot width PinØ Spare collet Spare pins (2x)MA820 Precision spinner compl. Ø30mm for 2,3mm shaft 5mm 2mm MA820.1 MA820.2MA821 Precision spinner compl. Ø30mm for 3,0mm shaft 5mm 2mm MA821.1 MA820.2MA822 Precision spinner compl. Ø30mm for 3,2mm shaft 5mm 2mm MA822.1 MA820.2MA823 Precision spinner compl. Ø40mm for 3,0mm shaft 6mm 2mm MA823.1 MA823.2MA824 Precision spinner compl. Ø40mm for 3,2mm shaft 6mm 2mm MA824.1 MA823.2MA825 Precision spinner compl. Ø40mm for 4,0mm shaft 6mm 2mm MA825.1 MA823.2MA826 Precision spinner compl. Ø40mm for 5,0mm shaft 6mm 2mm MA826.1 MA823.2MA827 Precision spinner compl. Ø40mm for 3,0mm shaft 8mm 3mm MA823.1 MA827.2MA828 Precision spinner compl. Ø40mm for 3,2mm shaft 8mm 3mm MA824.1 MA827.2MA829 Precision spinner compl. Ø40mm for 4,0mm shaft 8mm 3mm MA825.1 MA827.2MA830 Precision spinner compl. Ø40mm for 5,0mm shaft 8mm 3mm MA826.1 MA827.2
Spare collets see list below
Spare pins seelist below
Slot width
Ref. nr. Description Spare colletMA800 Collet propeller adapter for 2,0mm shaft M5, 1pc MA800.1MA801 Collet propeller adapter for 2,3mm shaft M5, 1pc MA801.1MA802 Collet propeller adapter for 3,0mm shaft M5, 1pc MA802.1MA803 Collet propeller adapter for 3,2mm shaft M5, 1pc MA803.1MA804 Collet propeller adapter for 4,0mm shaft M6, 1pc MA804.1MA805 Collet propeller adapter for 5,0mm shaft M6, 1pc MA805.1MA806 Collet propeller adapter for 5,0mm shaft M8, 1pc MA806.1MA807 Collet propeller adapter for 6,0mm shaft M8, 1pc MA807.1
Precision spinnerPrecision spinner
84-91cat2009.indd 8784-91cat2009.indd 87 20-01-2009 21:49:1720-01-2009 21:49:17
88
M1040SX-12 engine w/ pull start
Performance pull start engines
M1041SX-12 ‘factory tuned’ engine w/ pull start
Performance pull start engines
M1020 slide carb. M1021 rotary carb.SX-15 ‘factory tuned’ engine w/ pull start
Performance pull start engines
M1042SX-21 3P ‘factory tuned’ engine w/ pull start
Performance pull start engines
M1043.0209mm slide carburatorFits M1042, M1043, M1044
M1044SX-21 8P OMEGA engine w/ boost chamber
These engines are specially produced by a world leading manufacturer according to our high specifications. This results in well finished, reliable & powerful engines.
M1046SX-46 ABC BB airplane engine
•2ballbearings•ABCliner-piston•1,62Hp•2.000-17.000rpm•1/4-28UNF crankshaftthread
Ref. nr. Description HP RPM Carb.Ø CrankshaftM1020 SX-15 ‘factory tuned’ engine w/ pull start 1,2 3.000-33.000 5,5mm slide std M5M1040 SX-12 engine w/ pull start 1,05 3.000-30.000 5,5mm slide std M5M1041 SX-12 ‘factory tuned’ engine w/ pull start 1,1 3.000-32.000 5,5mm slide std M5M1042 SX-21 3P ‘factory tuned’ engine w/ pull start 1,9 3.000-35.000 7mm slide std1/4-28UNFM1043 SX-21 8P OMEGA w/ pull start 2,3 3.000-40.000 7mm slide std1/4-28UNFM1044 SX-21 8P OMEGA engine w/ boost chamber 2,4 3.000-40.000 7mm slide std1/4-28UNFM1045 SX-26 3P ‘factory tuned’ engine w/ pull start 2,1 3.000-35.000 7mm slide std1/4-28UNF
M1043SX-21 8P OMEGA engine w/ pull start
Performance pull start engines
M1045SX-26 engine w/ pull start
Performance pull start engines
2cm3 2cm3 2,5cm3 3,5cm3 3,5cm3
Performance engines
3,5cm3 4,2cm3
ø9mm
Performance airplane engine
6,5cm3
AIRPLANE ENGINE
84-91cat2009.indd 88 21-01-2009 16:04:50
89
T0620.104Tuned pipe set for 1/10 touring cars. Fits NITRO FUN 4WD, NITRO SHAFT, MSX-3, KYOSHO ALPHA, AVIO RACING
1/10 CAR pipes
T0620.105Manifold 1/10 scale. Fits NITRO FUN 4WD, NITRO SHAFT, MSX-3, KYOSHO ALPHA, AVIO RACING
1/10 CAR manifold
T60.080Manifold 1/10 scale. Fits NITRO TECH 12, NITRO FUN 2WD, HPI RS4, KYOSHO SPI-DER, CEN TS-4, XT-4
1/10 CAR manifold
T0660.226Tuned pipe set for 1/10 touring cars. Fits NITRO TECH 12, NITRO FUN 2WD, HPI RS4, KYOSHO SPIDER, CEN TS-4, XT-4
1/10 CAR pipes
T53.041Manifold for 1/8 scale off-road cars.
1/8 CAR manifold
T0600.048 1/10 scaleStandard foam airfi lter, set
T0600.072 1/10 scaleReplacement foam for T0600.048
T0660.100 1/10 scaleCompetition on-road foam air fi lter, set
T51.051 1/8 scaleStandard off-road foam airfi lter w/ silicon connector 45°
T01.036.1 1/10 scaleOff-road foam airfi lter, set
T01.036.2 Foam fi lter element, 1pc
T53.0431/8 scale manifold spring
1/8 CAR
84-91cat2009.indd 8984-91cat2009.indd 89 20-01-2009 21:49:5320-01-2009 21:49:53
90
T0141.1Starter rubber airplane
A453Starter disc car 100mm
A451Starter disc car 120mm
M006Starter box car
Finally a uni ver sal start er box that you don’t have to as sem ble. The start er box can be used for both 1/8 and 1/10 scale on-and off-road ve hi cles. Just add your choice of two 6-cell bat tery packs or one 12V sealed lead acid bat tery. The start er box gives strong start with plen ty of torque for even the most fi n icky of en gines.
Automatic glowdriver with glowshot charger in clud ed
T0183Electric geared engine starter 12V for engines up to 1.20 size. The starter is supplied with 2 aluminium cones. The small cone accepts spinners up to 70mm and the big cone up to 120mm.
HANDY, LIGHT &EXTREMELY POWERFUL
T0163Digital tacho meter
Precision propeller RPM measuring tool with LCD screen.Suitable for 2 and 3 bladed props. Measure up to 40.000 RPM.
84-91cat2009.indd 9084-91cat2009.indd 90 20-01-2009 21:50:0320-01-2009 21:50:03
91
5.5mm7mm8mm
10mm
8mm9mm
10mm12mm
T0102.2Glow start with meter
The ideal glow start for the active competition pilot. This blue anodised aluminium bodied glow start tests the condition of your glow plug during starts. If the meter needle indicates green, then the glow plug is in perfect condi-tion. If the meter needle indicates red, the glow plug is broken or not operating correctly.
T0119Remote glow unit
The ideal system for completely covered or dif-fi cult to access engines. This remote glow unit is supplied with 2 different glow plug adapters to fi t most glow plugs on the market.
T0117Peg glow clip
A lot of airplane modellers still prefer the peg type clip. PROTECH offers a high quality ver-sion with brass contact point.
T0101Glow clip standard
The PROTECH glow clips all feature a rugged metal construction, custom designed internal plug grip with a spring and sliding center contact, to give a perfect connection in all conditions.
T0101.2Glow clip extra long
The PROTECH glow clips all feature a rug-ged metal construction, custom designed internal plug grip with a spring and sliding center contact, to give a perfect connection in all conditions. The extra long version is especially for cowled engines, car engines and helicopters.
T0102.5Glow start with Ni-Cd battery
The glow start combines a locking glow clip together with a removable high capacity 1,2V rechargeable Ni-Cd battery.
T0161Cross wrench 4-way w/ glow plug holder
An internal clip holds the glow plug tight for easy installation and removal. The cross wrench is chrome plated for extra durability.
T0156Cross wrench 4-way XL w/ glow plug holder
An internal clip holds the glow plug tight for easy installation and removal. This cross wrench is chrome plated for extra durability.
T0102.4Glow start with charger
The glow start combines a locking glow clip together with a removable high capacity 1,2V re-chargeable Ni-Cd battery. The set contents: high quality glow socket with blue anodised aluminium battery holder, 1,2V Ni-Cd battery and a 5 hours mains (230V AC) charger.
T0102.4UKGlow start with charger UK
T0102.8Glow start with charger
The glow start combines a locking glow clip together with a high capacity 1,2V rechargeable Ni-Cd battery. The set contents: high quality glow socket with a 1,2V 1300mAh Ni-Cd battery and a 4 hours mains (230V AC) charger.
T0102.8UKGlow start with charger UK
E0415Fuel bottle 500ml
E0417 Fuel bottle 250ml
84-91cat2009.indd 9184-91cat2009.indd 91 20-01-2009 21:50:1920-01-2009 21:50:19
92
Ref. nr. Description Synthetic oil %
Castor oil %
Nitro%
D14101 Daytona fuel CAR 10% 1L 10% 2% 10%D14102 Daytona fuel CAR 10% 2,5L 10% 2% 10%D14161 Daytona fuel CAR 16% 1L 10% 2% 16%D14162 Daytona fuel CAR 16% 2,5L 10% 2% 16%D14251 Daytona fuel CAR 25% 1L 10% 2% 25%D14252 Daytona fuel CAR 25% 2,5L 10% 2% 25%
D16099After run oil 50ml, 1pc
Special after run oil to protect your engine from moisture and humidity impacts. Use this special after run oil before you want to store your engine for a longer period of time. Just remove your glowplug, put some drops of after run oil in your engine and turn the crankshaft around slowly. Your engine is fully protected.
D14161Daytona fuel CAR 16%1L
D14162Daytona fuel CAR 16%2,5L
D14251Daytona fuel CAR 25%1L
D14252Daytona fuel CAR 25%2,5L
D14101Daytona fuel CAR 10%1L
D14102Daytona fuel CAR 10%2,5L
This DAYTONA range of high quality fuels is produced by the world champion fuel manufacturer Jonker. All fuels are mixed with a special oil composed of 3 different synthetic oils and castor oil. Designed by a chemical engineer especially for model engine use.
92-103cat2009.indd 9292-103cat2009.indd 92 20-01-2009 21:53:3720-01-2009 21:53:37
93
R10001ROSSI glow plug P1, HOT, 1pc
R10002ROSSI glow plug P2, HOT, 1pc
R10003ROSSI glow plug P3, MEDIUM, 1pc
R10004ROSSI glow plug P4, COLD, 1pc
R10005ROSSI glow plug P5, EXTRA COLD, 1pc
R10006ROSSI glow plug P6, COLD, 1pc
R10007ROSSI glow plug P7, COLD, 1pc
R10008ROSSI glow plug P8, EXTRA COLD, 1pc
Rossi glowplugs, the perfect choice for performance. This range of glowplugs is manu-factured by a world leading Italian manufacturer. The number indicates the thick-ness of the heating wire. The highest number is the coldest plug available.
PA009Fuel filter standard SMALL, 2pc
PA011Fuel filter standard LARGE, 1pc
PA012Profi fuel fi lter SMALL, 1pc
PA013Profi fuel fi lter LARGE, 1pc
PA014Profi fuel fi lter EXTRA LARGE, 1pc
MA512One way valve, 1 pc
PA020Fueling valve SMALL, metha-nol, 1pc
PA021Fueling valve LARGE, metha-nol, 1pc
PA022Fueling valve LARGE, gasoline, 1pc
PA023Fueling tip SMALL for PA020, 1pc
PA024Fueling tip LARGE for PA021 & PA022, 1pc
MA173Metal pressure nipple M3, 1pc
MA174Metal pressure nipple M4, 1pc
MA305Metal pressure nipple M5, 1pc
PA010Metal pressure nipple M4, 90°, 1pc
PA003Filling nozzle w/ fi lter, 1pc
PA015Clutch w/ fi lter, 1pc
PA001Fuel stopper & mount, 2pcs
PA002Fuel line stopper, 4pcs
PA017Profi fuel fi lter LARGE w/ sin-tered bronze fi lter element, 1pc
T0147Hand crank fuel pump, 1pc
High quality hand crank fuel pump to fi ll or drain the fuel tank of your model. The hand crank fuel pump can be used for all types of methanol based fuels.
T0148Electric fuel pump 12V, 1pc
High quality electric fuel pump to fi ll or drain the fuel tank of your model. The pump can be used for all types of methanol based fuels. Can be used as stand alone unit or built-in in a fi eld box.
92-103cat2009.indd 9392-103cat2009.indd 93 20-01-2009 21:53:4420-01-2009 21:53:44
94
Ref. nr. Description Interior Ø
Exterior Ø
Wallthickness
Length in package
MA600 Silicon tube blue-line 2,0mm 3,5mm 0,75mm 1mMA600.25 Silicon tube blue-line 2,0mm 3,5mm 0,75mm 25mMA601 Silicon tube blue-line 2,0mm 5,0mm 1,50mm 1mMA601.25 Silicon tube blue-line 2,0mm 5,0mm 1,50mm 25mMA601.50 Silicon tube blue-line 2,0mm 5,0mm 1,50mm 50mMA602 Silicon tube blue-line 2,0mm 6,0mm 2,00mm 1mMA602.25 Silicon tube blue-line 2,0mm 6,0mm 2,00mm 25mMA603 Silicon tube blue-line 2.5mm 6,0mm 1,75mm 1mMA603.25 Silicon tube blue-line 2.5mm 6,0mm 1,75mm 25mMA610 Silicon tube blue-line 10,0mm 14.0mm 2,00mm 1mMA610.25 Silicon tube blue-line 10,0mm 14.0mm 2,00mm 25m
J20101Silicon tube YELLOW 2x5mm, 1mJ20101.25Silicon tube YELLOW 2x5mm, 25m
J20102Silicon tube RED 2x5mm, 1mJ20102.25Silicon tube RED 2x5mm, 25m
J20103Silicon tube GREEN 2x5mm, 1mJ20103.25Silicon tube GREEN 2x5mm, 25m
MA630Fuel tube TYGON 4041 3x6mm, 1mMA630.2Fuel tube TYGON 4041 3x6mm, 2m
MA631Fuel tube NEOPRENE 3x6mm, 1mMA631.2Fuel tube NEOPRENE 3x6mm, 2m
MA611.010Sil icon exhaust tube blue-l ine 11x15mm, 10cmMA611.025Sil icon exhaust tube blue-l ine 11x15mm, 25cmMA611.050Sil icon exhaust tube blue-l ine 11x15mm, 50cm
MA612.010Sil icon exhaust tube blue-l ine 15x21mm, 10cmMA612.025Sil icon exhaust tube blue-l ine 15x21mm, 25cmMA612.050Sil icon exhaust tube blue-l ine 15x21mm, 50cm
MA613.010Sil icon exhaust tube blue-l ine 19x25mm, 10cmMA613.025Sil icon exhaust tube blue-l ine 19x25mm, 25cmMA613.050Sil icon exhaust tube blue-l ine 19x25mm, 50cm
MA176Plastic tube coupler elbow, 1pc
MA177Plastic tube coupler straight, 1pc
MA178Plastic tube coupler ‘T-piece’, 1pc
MA300Silicon exhaust defl ector 45°, 10mm, 1pc
MA302Silicon exhaust defl ector 45°, 8mm, 1pc
MA303Silicon exhaust defl ector 45°, 6mm, 1pc
92-103cat2009.indd 9492-103cat2009.indd 94 20-01-2009 21:54:1420-01-2009 21:54:14
95
MA166Fuel tank 284ml62x48x120mm
MA167Fuel tank 340ml67x47x129mm
MA168Fuel tank 400ml68x58x128mm
MA186Fuel tank 450ml74x62x128mm
MA162Fuel tank 55ml35x29x68mm
MA163Fuel tank 110ml48x38x89mm
MA164Fuel tank 170ml51x42x97mm
MA165Fuel tank 227ml56x47x102mm
PA030Fuel tank hardware STANDARD, 1set
PA031Fuel tank hardware LARGE, 1set
MA440 Fuel tank hardware METHANOLMA441 Fuel tank hardware GASOLINE
MA433Fuel tank 600ml80x66x152mm
MA434Fuel tank 1000ml80x95x165mm
MA187Fuel tank 570ml77x62x141mm
MA427Fuel tank 100ml49x39x90mm
MA428Fuel tank 150ml50x47x94mm
MA429Fuel tank 250ml54x54x108mm
MA430Fuel tank 300ml60x54x112mm
MA431Fuel tank 400ml65x52x137mm
MA432Fuel tank 500ml69x65x154mm
92-103cat2009.indd 9592-103cat2009.indd 95 20-01-2009 21:54:3320-01-2009 21:54:33
96
Ref. nr. Description (1pc)AP06030 APC propeller 6x3AP06040 APC propeller 6x4AP07030 APC propeller 7x3AP07040 APC propeller 7x4AP07050 APC propeller 7x5AP07060 APC propeller 7x6AP07060-P APC propeller 7x6 pusher
AP07070 APC propeller 7x7AP07080 APC propeller 7x8AP08040 APC propeller 8x4AP08050 APC propeller 8x5AP08060 APC propeller 8x6AP08070 APC propeller 8x7AP08080 APC propeller 8x8AP09040 APC propeller 9x4AP09050 APC propeller 9x5AP09060 APC propeller 9x6AP09060-P APC propeller 9x6 pusher
AP09070 APC propeller 9x7AP09080 APC propeller 9x8AP09560 APC propeller 9,5x6AP10030 APC propeller 10x3AP10040 APC propeller 10x4AP10050 APC propeller 10x5AP10060 APC propeller 10x6AP10060-P APC propeller 10x6 pusher
Ref. nr. Description (1pc)AP10070 APC propeller 10x7AP10070-P APC propeller 10x7 pusher
AP10080 APC propeller 10x8AP10545 APC propeller 10,5x4,5AP10560 APC propeller 10,5x6AP11030 APC propeller 11x3AP11040 APC propeller 11x4AP11050 APC propeller 11x5AP11060 APC propeller 11x6AP11060-P APC propeller 11x6 pusher
AP11070 APC propeller 11x7AP11070-P APC propeller 11x7 pusher
AP11080 APC propeller 11x8AP11090 APC propeller 11x9AP11010 APC propeller 11x10AP11540 APC propeller 11,5x4AP11560 APC propeller 11,5x6AP12040 APC propeller 12x4AP12050 APC propeller 12x5AP12060 APC propeller 12x6AP12070 APC propeller 12x7AP12080 APC propeller 12x8AP12090 APC propeller 12x9AP12010 APC propeller 12x10AP12338 APC propeller 12,25x3,75AP12560 APC propeller 12,5x6
Ref. nr. Description (1pc)AP13040 APC propeller 13x4AP13060 APC propeller 13x6AP13070 APC propeller 13x7AP13080 APC propeller 13x8AP13090 APC propeller 13x9AP13590 APC propeller 13,5x9AP14050 APC propeller 14x5AP14060 APC propeller 14x6AP14060-P APC propeller 14x60-PAP14070 APC propeller 14x7AP14080 APC propeller 14x8AP14010 APC propeller 14x10AP15060 APC propeller 15x6AP15080 APC propeller 15x8AP15010 APC propeller 15x10AP16060 APC propeller 16x6AP16080 APC propeller 16x8AP16010 APC propeller 16x10AP17060 APC propeller 17x6AP17080 APC propeller 17x8AP17012 APC propeller 17x12AP18080 APC propeller 18x8AP18010 APC propeller 18x10AP18012 APC propeller 18x12AP20080 APC propeller 20x8AP20010 APC propeller 20x10AP20012 APC propeller 20x12AP20014 APC propeller 20x14AP21010 APC propeller 21x10AP22010 APC propeller 22x10AP22014 APC propeller 22x14AP24014 APC propeller 24x14AP26014 APC propeller 26x14
APC THIN ELECTRIC SERIESAP06055E APC THIN EP prop 6x5,5AP07050E APC THIN EP prop 7x5AP08040E APC THIN EP prop 8x4AP08060E APC THIN EP prop 8x6AP08060EP APC THIN EP 8x6 pusherAP08080E APC THIN EP prop 8x8AP09045E APC THIN EP prop 9x4,5AP09060E APC THIN EP prop 9x6AP09075E APC THIN EP prop 9x7,5AP09090E APC THIN EP prop 9x9
MA511Rubber fi nger guard
Protects your fi nger while starting your aircraft engine.
T0163Digital tacho meterPrecision propeller RPM measuring tool with LCD screen.Suitable for 2 and 3 bladed props. Measure up to 40.000 RPM.
Ref. nr. Description (1pc)AP10050E APC THIN EP prop 10x5AP10070E APC THIN EP prop 10x7AP10010E APC THIN EP prop 10x10AP11055E APC THIN EP prop 11x5,5AP11070E APC THIN EP prop 11x7AP11080E APC THIN EP prop 11x8AP11085E APC THIN EP prop 11x8,5AP11010E APC THIN EP prop 11x10AP12060E APC THIN EP prop 12x6AP12080E APC THIN EP prop 12x8AP12010E APC THIN EP prop 12x10AP12012E APC THIN EP prop 12x12AP13040E APC THIN EP prop 13x4AP13065E APC THIN EP prop 13x6,5AP13080E APC THIN EP prop 13x8AP13010E APC THIN EP prop 13x10AP14070E APC THIN EP prop 14x7AP14085E APC THIN EP prop 14x8,5AP14010E APC THIN EP prop 14x10AP14012E APC THIN EP prop 14x12AP15040E APC THIN EP prop 15x4AP15060E APC THIN EP prop 15x6AP15080E APC THIN EP prop 15x8AP15010E APC THIN EP prop 15x10AP16080E APC THIN EP prop 16x8AP16010E APC THIN EP prop 16x10AP16012E APC THIN EP prop 16x12AP17080E APC THIN EP prop 17x8AP17010E APC THIN EP prop 17x10AP17012E APC THIN EP prop 17x12AP18080E APC THIN EP prop 18x8AP18010E APC THIN EP prop 18x10AP18012E APC THIN EP prop 18x12AP19010E APC THIN EP prop 19x10AP19012E APC THIN EP prop 19x12AP20080E APC THIN EP prop 20x8AP20010E APC THIN EP prop 20x10AP20011E APC THIN EP prop 20x11AP20013E APC THIN EP prop 20x13AP20015E APC THIN EP prop 20x15AP20514E APC THIN EP prop 20,5x14
92-103cat2009.indd 9692-103cat2009.indd 96 20-01-2009 21:54:5220-01-2009 21:54:52
97
A series of high precision glass reinforced nylon spinners with aluminium CNC-machined backplate. These spinners are perfectly bal-anced to avoid any vibration to your model or engine.
2-Blade DescriptionMA550.38 Alu spinner Ø38mmMA550.44 Alu spinner Ø44mmMA550.51 Alu spinner Ø51mmMA550.57 Alu spinner Ø57mmMA550.63 Alu spinner Ø63mmMA550.70 Alu spinner Ø70mmMA550.76 Alu spinner Ø76mmMA550.82 Alu spinner Ø82mmMA550.89 Alu spinner Ø89mmMA550.95 Alu spinner Ø95mmMA550.102 Alu spinner Ø102mmMA550.114 Alu spinner Ø114mmMA550.127 Alu spinner Ø127mmMA550.140 Alu spinner Ø140mmMA550.152 Alu spinner Ø152mmMA550.165 Alu spinner Ø165mm
D1
D2
Ref. nr. Description D1 D2MA552.14 Spinner adapter M5x0,8 M4MA552.24 Spinner adapter U7/32-32 M4MA552.34 Spinner adapter 1/4-28UNF M4MA552.44 Spinner adapter 5/16-24UNF M4MA552.45 Spinner adapter 5/16-24UNF M5MA552.46 Spinner adapter 5/16-24UNF M6MA552.54 Spinner adapter 3/8-24UNF M4MA552.55 Spinner adapter 3/8-24UNF M5MA552.56 Spinner adapter 3/8-24UNF M6MA552.64 Spinner adapter M8x1 M4MA552.74 Spinner adapter M8x1,25 M4MA552.75 Spinner adapter M8x1,25 M5MA552.76 Spinner adapter M8x1,25 M6MA552.84 Spinner adapter M10x1,25 M4MA552.85 Spinner adapter M10x1,25 M5MA552.86 Spinner adapter M10x1,25 M6MA552.94 Spinner adapter M7x1 M4MA552.95 Spinner adapter M7x1 M5MA553.14 Spinner adapter M6x1 M4
Ref. nr. Description Size
MA850 Alu. propellernut M5
MA851 Alu. propellernut M6
MA852 Alu. propellernut M7x1
MA853 Alu. propellernut M8x1
MA854 Alu. propellernut M8x1.25
MA855 Alu. propellernut M10x1
MA856 Alu. propellernut 1/4x28UNF
MA857 Alu. propellernut 5/16x24UNF
MA858 Alu. propellernut 3/8x24UNF
2-Blade DescriptionMA123/. Nylon spinner Ø38mmMA124/. Nylon spinner Ø44mmMA125/. Nylon spinner Ø50mmMA126/. Nylon spinner Ø57mmMA127/. Nylon spinner Ø63mmMA128/. Nylon spinner Ø69mmMA129/. Nylon spinner Ø89mm
Available in different colours:
W=white, B=blue,
G=yellow, R=red, Z=black
Ref. nr. Description SizeMA865 Cone prop. nut M5MA866 Cone prop. nut M6
2-Blade DescriptionMA560/. Profi spinner Ø45mmMA561/. Profi spinner Ø51mmMA562/. Profi spinner Ø57mmMA563/. Profi spinner Ø63mmMA565/. Profi spinner Ø75mm
Ref. nr. DescriptionAK102 Prop & spinner reamer
The ideal tool to enlarge the hole in your propeller or spinner perfectly centered. The reamer is divided in 5 sections: 4,5mm - 6,2mm - 7mm - 8mm - 9,5mm. The reamer is made from fi rst-class HSS steel.
Alu.
spi
nner
s fo
r 2-b
lade
d pr
ops
rang
ing
from
38m
m to
165
mm
.
Alu.
spi
nner
s fo
r 3-b
lade
d pr
ops
rang
ing
from
38m
m to
165
mm
.
Balance your props and spinner before using them on this friction free balancer. The mandrel will hold all sizes props and spinners. A well balanced prop unit will save your engine bearings and protect your model from vibrations.
3-Blade DescriptionMA551.38 Alu spinner Ø38mmMA551.44 Alu spinner Ø44mmMA551.51 Alu spinner Ø51mmMA551.57 Alu spinner Ø57mmMA551.63 Alu spinner Ø63mmMA551.70 Alu spinner Ø70mmMA551.76 Alu spinner Ø76mmMA551.82 Alu spinner Ø82mmMA551.89 Alu spinner Ø89mmMA551.95 Alu spinner Ø95mmMA551.102 Alu spinner Ø102mmMA551.114 Alu spinner Ø114mmMA551.127 Alu spinner Ø127mmMA551.140 Alu spinner Ø140mmMA551.152 Alu spinner Ø152mmMA551.165 Alu spinner Ø165mm
Ref. nr. DescriptionMA510 Prop balancer
Available in different colours:W=white, G=yellow, R=red, Z=black
Tough, high impact spinners for right-hand rotation 2-bladed pro-pellers.
A complete line of aluminium spinners ranging from 38mm to 165mm. All spinners are supplied with matching backplate and spinner adapter nut. The perfect concentric fi t guarantees maximum strength and good balance, even at extreme RPM.
92-103cat2009.indd 9792-103cat2009.indd 97 20-01-2009 21:54:5820-01-2009 21:54:58
98
MA145Wheel w/ nylon rim 50mm, 2pcs
MA185Wheel w/ nylon rim 125mm, 2pcs
MA146Wheel w/ nylon rim 57mm, 2pcs
MA151Wheel w/ alu rim 19mm, 1pcs
MA147Wheel w/ nylon rim 63mm, 2pcs
MA152Wheel w/ alu rim 25mm, 1pcs
MA148Wheel w/ nylon rim 69mm, 2pcs
MA153Wheel w/ alu rim 30mm, 1pcs
MA149Wheel w/ nylon rim 73mm, 2pcs
MA143Wheel w/ nylon rim 38mm, 2pcs
MA183Wheel w/ nylon rim 90mm, 2pcs
MA144Wheel w/ nylon rim 44mm, 2pcs
MA184Wheel w/ nylon rim 100mm, 2pcs
MA155Tailwheel assembly small w/ wheel
PA004Steerable noseleg .25 size* wheel not included
PA005Steerable noseleg .40 size* wheel not included
MA156Undercarriage Ø3,5mm
MA157Undercarriage Ø4mm
MA780Landing gear axle, Ø4mm, 2pcs
MA781Landing gear axle, Ø5mm, 2pcs
MA782Landing gear axle, Ø6mm, 2pcs
MA473Aluminium wheel collar 2mm w/ hex set screw, 4pcs
MA474Aluminium wheel collar 2,5mm w/ hex set screw, 4pcs
MA475Aluminium wheel collar 3mm w/ hex set screw, 4pcs
MA476Aluminium wheel collar 4mm w/ hex set screw, 4pcs
MA477Aluminium wheel collar 5mm w/ hex set screw, 4pcs
MA478Aluminium wheel collar 6mm w/ hex set screw, 4pcs
MA750Nylon landing gear clamp SMALL, 4pcs
MA751Nylon landing gear clampMEDIUM, 4pcs
MA752Nylon landing gear clamp LARGE, 4pcs
MA753Nylon landing gear clamp, fl at, SMALL, 4pcs
MA754Nylon landing gear clamp, fl at, MEDIUM, 4pcs
MA755Nylon landing gear clamp, fl at, LARGE, 4pcs
WHEEL
S&
UNDER
CARR
IAGES
WHEEL
CO
LLARS
92-103cat2009.indd 9892-103cat2009.indd 98 20-01-2009 21:55:1120-01-2009 21:55:11
99
MA135Nylon engine mount .10-.15
MA136Nylon engine mount .20-.30
MA139Nylon engine mount .30-.40
MA140Nylon engine mount .45-.61
MA188Nylon engine mount .61-.90
MA680Steering arm Ø3mm, 16mm, 1pc
MA742Wheel cover holder 5mm, 2pcs
MA743Wheel cover holder 6mm, 2pcs
MA171Steering arm Ø3mm, 33mm, 1pc
MA172Steering arm Ø4mm, 33mm, 1pc
MA741Wheel cover holder 4mm, 2pcs
MA740Wheel cover holder 3mm, 2pcs
MA681Steering arm Ø4mm, 16mm, 1pc
MA449Wheel collar 1,5mm w/ hex set screw, 5pcs
MA450Wheel collar 2mm w/ hex set screw, 5pcs
MA448Wheel collar 2,5mm w/ hex set screw, 5pcs
MA451Wheel collar 3mm w/ hex set screw, 5pcs
MA650Plastic clevis w/ brass pin MI-CRO, 2pcs
MA452Wheel collar 4mm w/ hex set screw, 5pcs
MA651Plastic clevis M2 w/ brass pin SMALL, 2pcs
MA453Wheel collar 5mm w/ hex set screw, 5pcs
MA652Plastic clevis M3 w/ brass pin LARGE, 2pcs
MA454Wheel collar 6mm w/ hex set screw, 5pcs
MA101Plastic clevis M2, 4pcs
MA104Plastic clevis w/ locking screw, for wires up to Ø2mm, 2pcs
MA100Plastic snap link, 4pcs
MA654Aluminium clevis heavy duty M2, 2pcs
MA655Aluminium clevis heavy duty M3, 2pcs
MA660Aluminium clevis heavy duty M3, 2pcs
MA661Aluminium clevis heavy duty M4, 2pcs
ENGIN
EMO
UNTS
CLEV
ISES
MA490.1Metal clevis M2, 5pcs
MA490Metal clevis M2, 10pcs
MA491.1Metal clevis M2,5, 5pcs
92-103cat2009.indd 9992-103cat2009.indd 99 20-01-2009 21:55:5420-01-2009 21:55:54
100
MA492Metal clevis M3, 10pcs
MA485.1Threaded coupler M2 Ø0,8mm, 5pcs
MA491Metal clevis M2,5, 10pcs
MA492.1Metal clevis M3, 5pcs
MA481Threaded coupler M2 Ø1,6mm, 10pcs
MA485Threaded coupler M2 Ø0,8mm, 10pcs
MA480.1Threaded coupler M2 Ø1,2mm, 5pcs
MA480Threaded coupler M2 Ø1,2mm, 10pcs
MA481.1Threaded coupler M2 Ø1,6mm, 5pcs
MA482.1Threaded coupler M2 Ø2,1mm, 5pcs
MA482Threaded coupler M2 Ø2,1mm, 10pcs
MA483.1Threaded coupler M2,5Ø2,3mm, 5pcs
MA484.1Threaded coupler M3Ø2,8mm, 5pcs
MA483Threaded coupler M2,5Ø2,3mm, 10pcs
MA484Threaded coupler M3Ø2,8mm, 10pcs
MA486.1Threaded coupler M2 for carbon rod Ø3mm, 5pcs
MA486Threaded coupler M2 for car-bon rod Ø3mm, 10pcs
MA487.1Threaded coupler M3 for carbon rod Ø3mm, 5pcs
MA765Solid brass turnbuckles M2,5, 2pcs
MA766Solid brass turnbuckles M3, 2pcs
MA541.10Brass cable coupler M3, 10pcs
MA540Brass cable coupler M2, 2pcs
MA540.10Brass cable coupler M2, 10pcs
MA541Brass cable coupler M3, 2pcs
MA487Threaded coupler M3 for car-bon rod Ø3mm, 10pcs
MA499Metal clevis M3 + threaded coupler M3 for carbon rod Ø3mm, 2pcs
MA495Metal clevis M2 + threaded cou-pler M2 - Ø2,1mm, 2pcs
MA496Metal clevis M2,5 + threaded coupler M2,5 - Ø2,3mm, 2pcs
MA497Metal clevis M3 + threaded cou-pler M3 - Ø2,8mm, 2pcs
MA498Metal clevis M2 + threaded coupler M2 for carbon rod Ø3mm, 2pcs
THRE
ADED
COUP
LERS
BALL
LINKS
MA102Ball link M2 LARGE, 2pcs
MA103Ball link M2 SMALL, 2pcs
MA500Ball link M2 standard, 10pcs
92-103cat2009.indd 10092-103cat2009.indd 100 20-01-2009 21:56:3520-01-2009 21:56:35
101
MA700Ball link M2 w/ M1,6 screw, 2pcs
MA706Ball link M3 LONG, 2pcs
MA707Ball link M3 SHORT w/ M3 screw, 2pcs
MA501Ball link M3 standard, 10pcs
MA502Ball l ink M2,5 standard, 10pcs
MA711Aluminium precision ball link M3, 2pcs
MA708Ball link M3 LONG w/ M3 screw, 2pcs
MA709Aluminium precision ball link M2, 2pcs
MA710Aluminium precision ball link M2,5, 2pcs
MA712Aluminium precision ball link M4, 2pcs
MA521Metal push rod Ø2,5mm w/ M2 thread, 200mm, 5pcs
MA520Metal push rod Ø1,7mm w/ M2 thread, 200mm, 5pcs
MA522Metal push rod Ø2,1mm w/ M2,5 thread, 200mm, 5pcs
MA523Metal push rod Ø2,6mm w/ M3 thread, 200mm, 5pcs
MA530Steel push rod fully threaded M2, 200mm, 5pcs
MA531Steel push rod fully threaded M2,5, 200mm, 5pcs
MA532Steel push rod fully threaded M3, 200mm, 5pcs
MA685Carbon push rod Ø3mm w/ M2 metal clevises, 300mm, 1set
MA686Carbon push rod Ø3mm w/ M3 metal clevises, 300mm, 1set
MA691 Plastic push rod set 1m, 2pcsMA692 Plastic push rod set 1.5m, 2pcs
MA701Ball link M2 SHORT w/ M1,6 screw, 2pcs
MA702Ball link M2 LONG w/ M1,6 screw, 2pcs
MA703Ball link M2 SHORT, 2pcs
MA704Ball link M2 LONG, 2pcs
MA705Ball link M3 SHORT, 2pcs
MA760Tripple rod connector for Ø2mm wires, 1pc
MA761Tripple rod connector for Ø3mm wires, 1pc
PA006Adjustable push rod connec-tor, 4pcs
PUSH
RODS
MA672Control horn 19mm SMALL, 1,6mm holes w/ M2 screws, 2pcs
MA673Heavy duty control horn 34mm, 2,5mm holes w/ M3 screws, 2pcs
MA670Control horn 8mm MICRO, 1mm holes, 2pcs
MA671Control horn 19mm SMALL, 1mm holes w/ M2 screws, 2pcs
CONT
ROL
HORN
S
Plastic push rod with M2 threaded coupler and M2 metal clevis + Ø1mm steel piano wire inside the
inner plastic tube.
92-103cat2009.indd 10192-103cat2009.indd 101 20-01-2009 21:57:1720-01-2009 21:57:17
102
MA114Control horn 30mm LARGE, 1,6mm holes w/ M2 screws, 2pcs
MA113Control horn 22mm SMALL, 1,6mm holes w/ M2 screws, 2pcs
MA675Adjustable control horn heavy duty, 32mm w/ M2 screws, 2pcs
MA460Control horn 29mm SMALL, 2,2mm holes w/ TP-screws, 2pcs
MA461Control horn 34mm LARGE, 1,6mm holes w/ 2.2mm TP-screws, 2pcs
MA462Control horn reinforced 34mm LARGE, 1,6mm holes w/ 2.2mm TP-screws, 2pcs
MA676Adjustable control horn heavy duty, 32mm w/ M2,2 TP-screws, 2pcs
MA725Pin hinge 47mm x Ø3,5mm, 12pcs
MA720Pinned hinge 32x14mm, 10pcs
MA471Pinned hinge 34x17mm, 10pcs
MA472Pinned hinge 39x20mm, 10pcs
MA118Rubber bands 80x6mm, 12pcs
MA120Rubber bands 125x10mm, 8pcs
MA121Rubber bands 150x10mm, 8pcs
MA119Rubber bands 100x6mm, 12pcs
MA181Rubber bands 200x13mm, 6pcs
MA122Rubber bands 180x10mm, 6pcs
MA690Cable control set complete
MA170Aileron linkage, 1pair
MA723Flex hinge 20x10mm SMALL, 12pcs
MA724Flex hinge 28x16mm LARGE, 12pcs
MA470Poly hinge 25x20mm, 12pcs
MA722Flex hinge 7x3,5mm MICRO, 12pcs
HINGE
S
RUBB
ERBA
NDS
MA732Nylon threaded block M6, 2pcs
MA730Nylon threaded block M4, 2pcs
MA731Nylon threaded block M5, 2pcs
MA870Cockpit latch, 1pc
MA876Tow release for gliders up to 3,5m, 1pc
MA877Tow release for gliders up to 7m, 1pc
MA873U-shaped rubber band to contour canopies, motorcowl-ings, etc., 1m
WING
MOUN
TS
CANO
PY
ACC.
TOW
RE
LEASE
92-103cat2009.indd 10292-103cat2009.indd 102 20-01-2009 21:58:5320-01-2009 21:58:53
103
AT006Bust REGGY 1/4110x120mm
AT007Bust MIKE/JET 1/4155x133mm
AT008Bust PHILIP 1/4145x117mm
AT009Bust RONNY 1/5185x110mm
AT010Bust ERIC 1/5105x101mm
AT011Bust WERNER 1/5100x100mm
AT028Bust EMIL 1/845x53mm
AT029Bust NORBERT 1/845x53mm
AT030Bust SERGE 1/845x53mm
AT031Bust JAN/JEAN 1/845x53mm
AT032Bust TOM/JET 1/846x54mm
AT050Bust MARC 1/4105x105mm
AT051Bust DENNIS 1/4120x120mm
AT052Bust CAPTAIN 1/4145x134mm
AT053Bust CO-PILOT 1/4130x140mm
AT054Bust NAVIGATOR 1/4136x140mm
AT055Bust WEEKEND 1/4130x135mm
AT060Bust DENNIS 1/595x93mm
AT061Bust CAPTAIN 1/5118x116mm
AT012Bust EVA 1/5135x97mm
AT013Bust CASCADEUR 1/685x70mm
AT014Bust PIRATE 1/690x71mm
AT015Bust BLERIOT 1/6135x100mm
AT017Bust NADIA 1/680x70mm
AT019Bust LOUIS 1/692x73mm
AT020Bust ANN 1/693x68mm
AT021Bust PIETER/JET 1/677x73mm
AT024Bust GUYNEMER 1/678x78mm
AT025Bust PETER 1/660x71mm
AT026Bust LESTER 1/663x71mm
AT027Bust LUC 1/762x60mm
AT022Bust GRAND GUERRE 1/680x72mm
AT023Bust PIERRE 1/666x73mm
AT062Bust CO-PILOT 1/5102x110mm
AT063Bust NAVIGATOR 1/5114x108mm
AT064Bust WEEKEND 1/5105x105mm
AT070Bust DENNIS 1/675x75mm
AT071Bust MAT/JET 1/675x68mm
AT072Bust CAPTAIN 1/685x80mm
AT073Bust CO-PILOT 1/682x78mm
AT074Bust NAVIGATOR 1/685x81mm
AT075Bust WEEKEND 1/690x86mm
AT076Bust SPORTMAN 1/690x80mm
All the Pilot busts are painted and fi nished.
92-103cat2009.indd 10392-103cat2009.indd 103 20-01-2009 21:59:3620-01-2009 21:59:36
104
MA200Plastic coupling unit, 1pc
MA201Plain bore insert for 2mm shaft, 1pc
MA202Plain bore insert for 2,3mm shaft, 1pc
MA203Plain bore insert for 3mm shaft, 1pc
MA204Plain bore insert for 3,2mm shaft, 1pc
MA205Plain bore insert for 4mm shaft, 1pc
MA206Plain bore insert for 5mm shaft, 1pc
MA207Plain bore insert for 6mm shaft, 1pc
MA214Coupling insert w/ M3 thread, 1pc
MA209Coupling insert w/ M5 thread, 1pc
MA210Coupling insert w/ M6 thread, 1pc
MA211Coupling insert w/ 1/4-28UNF thread, 1pc
MA208Coupling insert w/ M4 thread, 1pc
MA212Double convertor, 1pc
MA220Rudder micro 20x32mm, 1pc
MA221Rudder mini 25x40mm, 1pc
MA222Rudder small 30x45mm, 1pc
MA224Rudder large 40x60mm, 1pc
MA225Rudder X-large 45x68mm, 1pc
MA223Rudder medium 35x53mm, 1pc
BOAT RUDDERS
Shiny brass rudder blades with brass rudder posts sleeved with a threaded glass filled nylon bearing tube. All brass nuts and retaining washers supplied, together with a strong, glass fi lled nylon tiller arm. Available in 6 sizes to suit a wide variety of applications.
DURAFLEX COUPLINGS
These couplings are available in a wide range of sizes to suit almost all applications. You can make up your own coupling by choosing two brass inserts that suit the shaft to be joined, then push them into a coupling unit to form the complete unit. These couplings are suitable for electric and IC powered drive units and accept a drive angle up to 15°. All coupling inserts with set screw fi tting are supplied with a 1,5mm hex key.
MA175Boat aerials, 1pc
104-112cat2009.indd 104104-112cat2009.indd 104 20-01-2009 22:47:0620-01-2009 22:47:06
105
MA1304Rubber shock mount M5, 2pcs
MA1311Rubber shock mount M4, 2pcs
MA1315Rubber shock mount M5, 2pcs
MA1316Rubber shock mount M6, 2pcs
MA1301Rubber shock mount M4, 2pcs
MA1302Rubber shock mount M4, 2pcs
MA1303Rubber shock mount M4, 2pcs
MA1312Rubber shock mount M4, 2pcs
MA1313Rubber shock mount M4, 2pcs
MA1317Rubber shock mount M6, 2pcs
MA1318Rubber shock mount M6, 2pcs
MA1330Rubber shock mount M4, 4pcs
MA1310Rubber shock mount M3, 2pcs
MA1331Rubber shock mount M5, 4pcs
MA1314Rubber shock mount M5, 2pcs
MA1332Rubber shock mount M6, 4pcs
MA1300Rubber shock mount M3, 2pcs
MA1307Rubber shock mount M6, 2pcs
MA1305Rubber shock mount M5, 2pcs
MA1306Rubber shock mount M6, 2pcs
Ref. nr. Description D1 D2 L1 L2 HardnessMA1300 Rubber shock mount, 2pcs M3 8mm 6mm 8mm 55°shoreMA1301 Rubber shock mount, 2pcs M4 10mm 10mm 10mm 55°shoreMA1302 Rubber shock mount, 2pcs M4 10mm 10mm 15mm 55°shoreMA1303 Rubber shock mount, 2pcs M4 15mm 15mm 15mm 55°shoreMA1304 Rubber shock mount, 2pcs M5 15mm 15mm 15mm 55°shoreMA1305 Rubber shock mount, 2pcs M5 15mm 15mm 20mm 55°shoreMA1306 Rubber shock mount, 2pcs M6 20mm 15mm 20mm 55°shoreMA1307 Rubber shock mount, 2pcs M6 20mm 15mm 15mm 55°shore
Ref. nr. Description D1 D2 D3 L1 L2 HardnessMA1310 Rubber shock mount, 2pcs M3 8mm M3 6mm 8mm 55°shoreMA1311 Rubber shock mount, 2pcs M4 10mm M4 10mm 10mm 55°shoreMA1312 Rubber shock mount, 2pcs M4 10mm M4 10mm 15mm 55°shoreMA1313 Rubber shock mount, 2pcs M4 15mm M4 15mm 15mm 55°shoreMA1314 Rubber shock mount, 2pcs M5 15mm M5 15mm 15mm 55°shoreMA1315 Rubber shock mount, 2pcs M5 15mm M5 15mm 20mm 55°shoreMA1316 Rubber shock mount, 2pcs M6 20mm M6 15mm 20mm 55°shoreMA1317 Rubber shock mount, 2pcs M6 20mm M6 15mm 15mm 55°shoreMA1318 Rubber shock mount, 2pcs M6 25mm M6 15mm 30mm 55°shore
Ref. nr. Description D1 D2 L1 L2 HardnessMA1330 Rubber shock mount M4 8mm 1,4mm 8mm 55°shoreMA1331 Rubber shock mount M5 10mm 0,9mm 10mm 55°shoreMA1332 Rubber shock mount M6 13mm 1,3mm 10mm 55°shore
Finally an easy solution to lower the noise and vibration of your model. These rubber shock mounts can be easily installed using a standard motor mount. Just enlarge the holes in the fi rewall , slide the rubber shock mount in place and reattach the motor mount. Can be used for engines from 2,5cc up to 100cc.
104-112cat2009.indd 105104-112cat2009.indd 105 20-01-2009 22:47:3020-01-2009 22:47:30
106
Ref. nr. Description (packed 10pcs)MA2020 Pan head screw M1,6x6MA2021 Pan head screw M1,6x8MA2022 Pan head screw M1,6x12MA2023 Pan head screw M2x6MA2024 Pan head screw M2x8MA2025 Pan head screw M2x12MA2026 Pan head screw M2x20MA2027 Pan head screw M2,5x8MA2028 Pan head screw M2,5x12MA2029 Pan head screw M2,5x16MA2030 Pan head screw M2,5x20
Ref. nr. Description (packed 10pcs)MA2031 Pan head screw M3x8MA2032 Pan head screw M3x12MA2033 Pan head screw M3x16MA2034 Pan head screw M3x20MA2035 Pan head screw M3x25MA2036 Pan head screw M3x30MA2037 Pan head screw M4x10MA2038 Pan head screw M4x12MA2039 Pan head screw M4x16MA2040 Pan head screw M4x20MA2041 Pan head screw M4x25MA2042 Pan head screw M4x30
Ref. nr. Description (packed 10pcs)
MA2260 Countersunk screw M3x6MA2261 Countersunk screw M3x8MA2262 Countersunk screw M3x10MA2263 Countersunk screw M3x12MA2264 Countersunk screw M3x16MA2265 Countersunk screw M3x20MA2267 Countersunk screw M3x30MA2268 Countersunk screw M4x10MA2269 Countersunk screw M4x12MA2270 Countersunk screw M4x16MA2271 Countersunk screw M4x20MA2272 Countersunk screw M4x25MA2273 Countersunk screw M4x30
Ref. nr. Description (packed 10pcs)MA2060 Socket head screw M2x5MA2061 Socket head screw M2x8MA2062 Socket head screw M2x12MA2063 Socket head screw M2,5x12MA2064 Socket head screw M2,5x20MA2065 Socket head screw M3x6MA2066 Socket head screw M3x8MA2067 Socket head screw M3x10MA2068 Socket head screw M3x12MA2069 Socket head screw M3x16MA2070 Socket head screw M3x20MA2071 Socket head screw M3x25MA2072 Socket head screw M3x30MA2073 Socket head screw M4x10MA2074 Socket head screw M4x12MA2075 Socket head screw M4x16MA2076 Socket head screw M4x20MA2077 Socket head screw M4x30MA2078 Socket head screw M4x35MA2079 Socket head screw M4x40MA2080 Socket head screw M5x10MA2081 Socket head screw M5x16MA2082 Socket head screw M5x20MA2083 Socket head screw M5x25MA2084 Socket head screw M5x30MA2085 Socket head screw M5x40MA2086 Socket head screw M6x10MA2087 Socket head screw M6x16MA2088 Socket head screw M6x20MA2089 Socket head screw M6x25MA2090 Socket head screw M6x30MA2091 Socket head screw M6x35MA2092 Socket head screw M6x45
Ref. nr. Description (packed 10pcs)MA2180 Countersunk socket head screw M3x6MA2181 Countersunk socket head screw M3x8MA2182 Countersunk socket head screw M3x10MA2183 Countersunk socket head screw M3x12MA2184 Countersunk socket head screw M3x16MA2185 Countersunk socket head screw M3x20MA2186 Countersunk socket head screw M3x25MA2187 Countersunk socket head screw M3x30MA2188 Countersunk socket head screw M4x10MA2189 Countersunk socket head screw M4x12MA2190 Countersunk socket head screw M4x16MA2191 Countersunk socket head screw M4x20MA2192 Countersunk socket head screw M4x25MA2193 Countersunk socket head screw M4x30MA2194 Countersunk socket head screw M4x35MA2195 Countersunk socket head screw M4x40MA2196 Countersunk socket head screw M5x10MA2197 Countersunk socket head screw M5x16MA2198 Countersunk socket head screw M5x20MA2199 Countersunk socket head screw M5x25MA2200 Countersunk socket head screw M5x30MA2201 Countersunk socket head screw M5x40
Ref. nr. Description (packed 10pcs)MA2120 E-clips 1,5mmMA2121 E-clips 1,9mmMA2122 E-clips 2,3mmMA2123 E-clips 3,2mmMA2124 E-clips 4mmMA2125 E-clips 5mmMA2126 E-clips 6mmMA2127 E-clips 7mm
104-112cat2009.indd 106104-112cat2009.indd 106 20-01-2009 22:47:4620-01-2009 22:47:46
107
Ref. nr. Description (packed 10pcs)MA2210 Pan head TP-screw 2,2x6.5MA2211 Pan head TP-screw 2,2x9.5MA2212 Pan head TP-screw 2,9x6.5MA2213 Pan head TP-screw 2,9x9.5MA2215 Pan head TP-screw 2,9x13MA2216 Pan head TP-screw 2,9x16MA2217 Pan head TP-screw 2,9x19MA2218 Pan head TP-screw 3,5x13MA2219 Pan head TP-screw 3,5x16MA2220 Pan head TP-screw 3,5x25MA2221 Pan head TP-screw 3,5x32MA2222 Pan head TP-screw 4,2x13MA2223 Pan head TP-screw 4,2x16MA2224 Pan head TP-screw 4,2x19MA2225 Pan head TP-screw 4,2x25
Ref. nr. Description (packed 10pcs)MA2240 Countersunk TP-screw 2,9x6.5MA2241 Countersunk TP-screw 2,9x9.5MA2242 Countersunk TP-screw 2,9x13MA2243 Countersunk TP-screw 2,9x16MA2244 Countersunk TP-screw 2,9x25MA2245 Countersunk TP-screw 3,9x13MA2246 Countersunk TP-screw 3,9x16MA2247 Countersunk TP-screw 3,9x19MA2248 Countersunk TP-screw 4,2x13MA2249 Countersunk TP-screw 4,2x16MA2250 Countersunk TP-screw 4,2x22MA2251 Countersunk TP-screw 4,2x25MA2252 Countersunk TP-screw 4,2x32
Ref. nr. Description (packed 10pcs)MA2050 Set screw M3x3MA2051 Set screw M3x5MA2052 Set screw M4x4MA2053 Set screw M4x6MA2054 Set screw M4x10MA2055 Set screw M4x16MA2056 Set screw M5x5MA2057 Set screw M5x10MA2058 Set screw M5x20
Ref. nr. Description (packed 10pcs)MA2280 Shim ring steel 4x8x0,3mmMA2281 Shim ring steel 5x10x0,3mmMA2282 Shim ring steel 6x12x0,3mmMA2283 Shim ring steel 8x14x0,3mmMA2285 Shim ring steel 4x8x0,5mmMA2286 Shim ring steel 5x10x0,5mmMA2287 Shim ring steel 6x12x0,5mmMA2288 Shim ring steel 8x14x0,5mm
Ref. nr. Description (packed 4pcs)MA2130 Hex blind nuts M3MA2131 Hex blind nuts M4
Ref. nr. Description (packed 4pcs)MA2160 Nylon bolt M4x20MA2161 Nylon bolt M5x30MA2162 Nylon bolt M6x40
Ref. nr. Description (packed 10pcs)MA2101 Flat washers 2,2x5mmMA2102 Flat washers 2,7x6mmMA2103 Flat washers 3,2x7mmMA2104 Flat washers 4,3x9mmMA2105 Flat washers 5,3x10mmMA2106 Flat washers 6,4x12mmMA2107 Flat washers 8,4x16mm
Ref. nr. Description (packed 4pcs)MA2140 Blind nuts M3MA2141 Blind nuts M4MA2142 Blind nuts M5MA2143 Blind nuts M6
Ref. nr. Description (packed 10pcs)MA2010 Nylstop nut M2MA2011 Nylstop nut M3MA2012 Nylstop nut M4MA2013 Nylstop nut M5MA2014 Nylstop nut M6
Ref. nr. Description (packed 10pcs)MA2000 Hexagonal nut M1,6MA2001 Hexagonal nut M2MA2002 Hexagonal nut M2,5MA2003 Hexagonal nut M3MA2004 Hexagonal nut M4MA2005 Hexagonal nut M5
Ref. nr. Description (packed 10pcs)PL200 Cable tie 2,5x102mm, 10pcsPL201 Cable tie 2,5x200mm, 10pcsPL202 Cable tie 3,5x145mm, 10pcsPL203 Cable tie 3,5x215mm, 10pcsPL204 Cable tie 4,7x160mm, 10pcsPL205 Cable tie 4,7x200mm, 10pcsPL206 Cable tie 4,7x285mm, 10pcsPL207 Cable tie 4,7x360mm, 10pcs
Ref. nr. Description (packed 5pcs)T51.061 Quick release cable ties 7x290mm, 5pcs
Ref. nr. Description (packed 10pcs)PA007 Body clips 1/8 scalePA008 Body clips 1/10 scale
104-112cat2009.indd 107104-112cat2009.indd 107 20-01-2009 22:47:5420-01-2009 22:47:54
108
PT115Hex wrench 1,5mm
PT260Socket driver 6,0mm
PT458Phillips screwdriver 5,8mm
PT280Socket driver 8,0mm
PT250Socket driver 5,0mm
PT440Phillips screwdriver 4,0mm
PT330Flat screwdriver 3,0mm
PT255Socket driver 5,5mm
PT450Phillips screwdriver 5,0mm
PT340Flat screwdriver 4,0mm
PT130Hex wrench 3,0mm
PT350Flat screwdriver 5,0mm
PT140Hex wrench 4,0mm
PT270Socket driver 7,0mm
PT245Socket driver 4,5mm
PT430Phillips screwdriver 3,0mm
PT150Hex wrench 5,0mm
PT120Hex wrench 2,0mm
PT125Hex wrench 2,5mm
R/C PROFI TOOLSA superb range of professional R/C tools for the demanding modeller. The ergo-nomic shape of the 7075 T-6 aluminium hollow handle guarantees a perfect grip. All tips are made of special hardened steel for long life and to prevent damage to the screw heads. Special attention is given to the length of the tools, so that even diffi cult places are accessible.
104-112cat2009.indd 108104-112cat2009.indd 108 20-01-2009 22:48:0720-01-2009 22:48:07
109
PT400Phillips screwdriver set, 4pcs (3mm; 4mm; 5mm; 5,8mm)
PT100Hex wrench set, 4pcs (1,5mm; 2mm; 2,5mm; 3mm)
104-112cat2009.indd 109104-112cat2009.indd 109 20-01-2009 22:48:3920-01-2009 22:48:39
110
T0165Sealing iron
T0165.UKSealing iron UK
The automatic sealing iron is the tool you need for a perfect cover-ing job. The temperature of this sealing iron is adjustable for all fi lms on the market. The temperature is controlled automatically within a range of ±2°C.
• The iron shoe is custom designed to reach all diffi cult spots.• The shoe is Tefl on coated for a smooth covering.
This is the tool a lot of modellers were waiting for. The fi ne seal-ing iron will reach any place on your model. The temperature can be switched from high to low.Round & fl at iron shoe included.
• Optimum shaped fl at and round trim shoe.• Trim shoes are coated with non-scratch Tefl on.
T0166Fine sealing iron
T0166.UKFine sealing iron UK
AK100Curved scissors
Purposely designed curved scis sors to cut all plastic ma te ri als, es pe cial ly polycarbonate. The curved an gle will help you to cut smooth curves for wheels, etc ... The scis sors are made of hard ened steel and will cut up to 2 mm thick polycarbonate.
T0164Z-bender
For easy bending of conrol rod ends to fi t servo-arms. Hardened steel jaws.
The ideal tool to enlarge the hole in your propel-ler or spin ner, perfectly centered. The reamer is divided in 5 sections: 4,5 mm - 6,2 mm - 7 mm - 8 mm - 9,5 mm. The ream er is made of fi rst class HSS steel.
The ideal tool to make perfect lyround holes in any kind of plas tic ma te ri al. To drill or en large holes from 3 mm to 14 mm. The ream er is made from of class HSS steel.
AK102Propeller & spinner reamer
AK101Knife edge reamer
104-112cat2009.indd 110104-112cat2009.indd 110 20-01-2009 22:48:4720-01-2009 22:48:47
111
PROTECH CA GLUES
A120-25CA glue 120
MEDIUM, 25g
A180-25CA glue 180THICK, 25g
A105-50CA glue 105THIN, 50g
A120-50CA glue 120
MEDIUM, 50g
A180-50CA glue 180THICK, 50g
A500-285-min epoxy glue, 28g
A600Nut lock, 15g
Use nut lock on all nuts & bolts which need to be protected from vibrations, but still need to loosened easely.
A105-25CA glue 105THIN, 25g
LX906Air fi lter oil, 50ml
Special oil for foam fi lters only. The oil is applied on the foam fi lter by squeezing the foam and the oil becomes sticky to provide optimal dust fi ltering.
Silicon oils for shock absorbers & differentialsA range of high quality silicon oils. The advantage of silicon oil is the constant viscosity under different tem per a tures. The higher the number, the thicker the viscosity. Silicon oils from 100 to 2500 cps are used in shock absorbers and from 2500 to 100000 cps can be used in differentials.
SL450Silicon oil 450 cps, 50mlSL500Silicon oil 500 cps, 50mlSL600Silicon oil 600 cps, 50mlSL700Silicon oil 700 cps, 50mlSL800Silicon oil 800 cps, 50mlSL900Silicon oil 900 cps, 50mlSL1000Silicon oil 1000 cps, 50ml
TH
INTH
ICK
SL2500Silicon oil 2500 cps, 50mlSL5000Silicon oil 5000 cps, 50mlSL10000Silicon oil 10000 cps, 50mlSL30000Silicon oil 30000 cps, 50mlSL50000Silicon oil 50000 cps, 50mlSL100000Silicon oil 100000 cps, 50ml
SO
FT
MED
IUM
HA
RD
Silicon differential oil
SL001High speed grease, 250g
Special sticky grease for differentials, gears and ball bearings. Water repellent.
SL100Silicon oil 100 cps, 50mlSL150Silicon oil 150 cps, 50mlSL200Silicon oil 200 cps, 50mlSL250Silicon oil 250 cps, 50mlSL300Silicon oil 300 cps, 50mlSL350Silicon oil 350 cps, 50mlSL400Silicon oil 400 cps, 50ml
TH
INM
EDIU
M
A601Stud lock, 15g
Use stud lock on all nuts & bolts which may never be-come loose anymore.
104-112cat2009.indd 111104-112cat2009.indd 111 20-01-2009 22:48:5520-01-2009 22:48:55
This catalog is an edition of PROTECH®, Geelseweg 80, B-2250 OLEN (Belgium). This catalog is protected by a copyright and nothing from this edition may be reproduced or used without any prior written authorisation. Whilst every effort has been made to ensure the accuracy of the information in this catalog, errors do creep in and PROTECH® can accept no responsibility for failures, wrong specifi cations, accuracy of colours, losses or damages caused. PROTECH® denies any responsability claims or damages caused by use of our products. PROTECH® is not responsable for product changes or availability of our products. The products of dangerous nature included in this catalog are submissive to special handling and storage specifi cations. Please check with your local authorities for existing legislation.
104-112cat2009.indd 112104-112cat2009.indd 112 20-01-2009 22:49:2220-01-2009 22:49:22
Recommended