View
3
Download
0
Category
Preview:
Citation preview
CONCEP
T
TV WIDTH
350 164 30
RECOMMENDED(COULD BE ADJUSTED)
20mm INFILL PANEL IS CONSIDERED
26
169
729MINIMUM
INNERCABINET HEIGHT
BOTTOMCLOSURE PANELFORCLADDING
TOP TRAYFOR
CLADDING2024
MAX TRAVEL 999mm
CUT OUT SIZE (W x D)MINIMUM CUT OUT WIDTH (W)= TV WIDTH + 10mm (LEFT CLEARANCE) + 10mm(RIGHT CLEARANCE)
MINIMUM CUT OUT DEPTH (D)= 169mm + TV DEPTH + 10mm (FRONT CLEARANCE)
MAX SCREEN HEIGHT (H) (CONSIDERING 20mm THK INFILL PANEL) = 969mm
PROPRIETARY AND CONFIDENTIAL. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ULTRALIFT AUSTRALIA PTY LTD. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ULTRALIFTAUSTRALIA IS PROHIBITED.
TTS&PHS-000-TTS - DOWN
TITAN MANUAL SWIVEL VER. IIIC:\UltraliftVault\00-STANDARD PRODUCTS\TV Vertical Lift\TTS-000 & PHS-000\CAD\TTS-SPEC
www.ultraliftaustralia.com.au
Phone: +613 9459 0873
Email: sales@ultraliftaustralia.com.au
TTS&PHS-000-TTS - DOWN-A
Finish: Material:
Powdercoated
STEEL
Page 1 of 3
SText BoxNOTE: DIMENSIONS SUBJECT TO CHANGE. PLEASE CONFIRM PRIOR TO INSTALLATION OR COMMENCING ANY CONSTRUCTION WORK.
VIEWVIEW
C
C W
H
10 10
B
D
D
TOP LID
10mmRECOMMENDED GAP
BETWEEN TV AND INFILL PANEL
20mmINFILL PANEL
REPRESENTATION 56 DETAIL B
SCALE 1 : 10
D
56
10
H
E
SECTION D-D
INFILL PANELREP.
TOP LIDREP.
C/D
C/W 5 5
5
5
F
5
5
DETAIL FSCALE 2 : 15
CABINET INNER HEIGHT (H) = TV HEIGHT + 56mm[MINIMUM CABINET INNER HEIGHT IS 729mm]
SECTION VIEW
CABINET INNER WIDTH (W) = TV WIDTH + 20mmCABINET INNER DEPTH (D) = TV DEPTH + 169mm + 10mm (FRONT CLEARENCE)
CUTOUT DEPTH (C/D) = CABINET INNER DEPTH - 10
CUTOUT WIDTH (C/W) = CABINET INNER WIDTH - 10
TTS&PHS-000-TTS - DOWN
TTS&PHS-000-TTS - DOWN-A
www.ultraliftaustralia.com.au
Phone: +613 9459 0873
Email: sales@ultraliftaustralia.com.au
Approval Stamp
Page 2 of 3
STEELPowdercoated
Material:Finish:
C:\UltraliftVault\00-STANDARD PRODUCTS\TV Vertical Lift\TTS-000 & PHS-000\CAD\TTS-SPEC
TITAN MANUAL SWIVEL VER. III
PROPRIETARY AND CONFIDENTIAL. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ULTRALIFT AUSTRALIA PTY LTD. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ULTRALIFTAUSTRALIA IS PROHIBITED.
G
G
10
56
10 5 5
H
SECTION G-GSCALE 1 : 8
INFILL PANEL
BASE PANEL HARD UP TO BACK OF THE CABINET
5 20
DETAIL HSCALE 1 : 3
TAPERED EDGE
INSTALLATION GUIDELINE
TTS&PHS-000-TTS - DOWN
TTS&PHS-000-TTS - DOWN-A
www.ultraliftaustralia.com.au
Phone: +613 9459 0873
Email: sales@ultraliftaustralia.com.au
Approval Stamp
Page 3 of 3
STEELPowdercoated
Material:Finish:
C:\UltraliftVault\00-STANDARD PRODUCTS\TV Vertical Lift\TTS-000 & PHS-000\CAD\TTS-SPEC
TITAN MANUAL SWIVEL VER. III
PROPRIETARY AND CONFIDENTIAL. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ULTRALIFT AUSTRALIA PTY LTD. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ULTRALIFTAUSTRALIA IS PROHIBITED.
sheet 1Drawing View1Drawing View26Drawing View27Alternate Position1Drawing View28Drawing View39
Sheet1Drawing View29Section View VIEW-VIEWDetail View B (1 : 10)Drawing View33Section View D-DDrawing View36Drawing View38Detail View F (2 : 15)
Sheet2(2)Drawing View48Section View G-GDetail View H (1 : 3)
Recommended