Proposed Conventional Sextupole for Installation at A0 Introduction (Dean Still) Reasons for...

Proposed Conventional Sextupole for Installation at A0

Introduction (Dean Still)Reasons for installation- Reduce I in S6 feeddown sextupole circuit at injection and possibly up the ramp.

Magnetic Parameters – ( Vladimir Shiltsev, Dave Harding, Yuri Alexahin)Does the magnet need to ramp?Ramp tests.Possibly of building laminated version

Mechanical – (Mike Mcgee, Bill Robotham)Will it fit into the A0 space?Requires stand modification.Requires entire magnet rotated +/- 30 degrees.

Electrical/Power Supply – (Wolff)Need to know

Installation – (Jim Volk)MechanicalCable pullsControlsWater Manifold

Proposed Conventional Sextupole for Installation at A09/12/03 Meeting

Magnetic Parameters – (Dave Harding)Look at measurements preformed.

Mechanical – (Mike Mcgee, Bill Robotham)Look at proposed mech. changes from Bill.(Dean)

Electrical/Power Supply – (Wolff)Update to power supply needs.Need to know ripple requirements.

Installation – (Jim Volk)MechanicalCable pullsControlsWater Manifold

Proposed Location – A0

antiprotons

E0

target

IR

proton s

D0

A0

collimator

IR

B0

C0

F0

F49

Install Here

Location to Install

Install upstream of A0 abort block

Floor is ground up

F49

Other Sextupole Options

TESLA

MI ISA MR SEXTUPOLE

Accumulator Skew Sextuple

Length: 30 in.Bore: 4 in.Coil: 21 turnsHeight: 15 ¾ in.

If turned ,~10 3/4 in. from beam center to edge of steel.

Will need to cut feet off and rotate.

Accumulator Skew Sextupole IVladimir Kashikhin-Technical Review, March 19, 1999

Sextupole Corrector Parameters

Type of the magnet skew sextupole Integrated strength 80 T/mMagnet aperture 2.625 in ( 66.675 mm )Magnetic core length 30 in ( 0.762 m )Field quality (deviation fromthe ideal sextupole field) < 0.1 %Good field region diameter 4 in ( 101.6 mm )Beam pipe diameter ( OD ) 4 in (101.6 mm )Copper conductorConductor dimension ( MA-186587) 0.4096 in ( 10.404 mm)Cooling channel diameter 0.229 in ( 5.83 mm )Cu effective cross-section 81.67 mm²Cu resistivity at 20 °C 0.018 Ω mm²/mTotal length per magnet 240 mTotal weight per magnet 175 kg

Accumulator Skew Sextupole IIVladimir Kashikhin-Technical Review, March 19, 1999

Winding ParametersNumber of turns per coil 21Number of coils 6Length of the turn 1.92 m Coil resistance at 20 ºC 8.9 mΩWinding resistance at 20 ˚C 54 mΩVoltage drop per magnet 13.5 V( + 10% extra for current leads)Maximum current 200 APower dissipation per magnet 2440 WNumber of the water cooling circuits 1Water pressure drop 0.4 MPaWater flow 0.018 l/sWater temperature rise 32 ˚C Ferromagnetic Core ParametersCore material low carbon steel AISI 1006 Core length 30 in ( 762 mm ) Core weight 580 kgTotal magnet weight 800 kg

Spare SSS Magnet at TPL

Serial #: SSS001-1