View
250
Download
7
Category
Preview:
Citation preview
SEIIDENTIFICATION
SOLUTIONS
Document last modified: 05-10-2017 11:50:39
HPD MILITARY SPECIFICATION SLEEVE 3:1DOUBLE-SIDED PRINTABLE HEATSHRINK SLEEVES 3:1 RATIO
APPLICATION METHOD - SHRINK ONPRODUCT DATA
Very flexible, high temperature rated, highly flame retardant, UL and CSA recognised heat shrinkable
tubing (3:1 shrink ratio). Flexible polyolefin sleeves used for wire identification and insulation
purposes. Markers are supplied roll form in a flattened format on a carrier designed for use with
double-sided transfer thermal printers. The markers are produced to order in following widths :
10mm - 12.5mm - 16mm - 25mm and 50mm. Please enquire if other special lengths are required.
Flame Retardant
Self Extinguishing
Meets NSA937201 Airbus Specification
Print onto Paper Liner for QA
Easy Pick Application
Double sided print enabled
Perforation after every sleeve for easy sorting
Print performance to Military Specifications
10mm, 12.5mm, 16mm, 25mm & 50mm Lengths
Colours - white and yellow as standard
APPROVAL STANDARDSSAE-AMS-DTL-23053/5
UL224 VW-1 Flammability
NSA 937201MR
NSA 937201MT
RoHS Compliant
REACH Compliant
PROPERTY VALUE
Continuous Operating Temperature
Elongation After Heat Ageing (175°C x 168h)
Heat Shock (250°C x 4h)
Min. Shrink Temp. for full Recovery
Longitudinal Change
Tensile Strength
Elongation at Break
Secant Modulus
Flammability
Voltage Rating
-55°C to +135°C
100% Min.
Pass no crack, flowing or dripping
+90°C
+5% to -15% Max.
10.3 MPa Min.
200% Min.
173 MPa Max.
60 sec Max. UL 224 vW1
600V
SEI Identification Solutions Ltd
Pysons Road Industrial Estate
Broadstairs Kent CT10 2LQ UK
+44 (0) 1843 865241
+44 (0) 1843 867180
info@sei-id.com
t
f
e
©2015 SEI Identification Solutions Ltd. All rights reserved. The SEI Identification Solutions logo is a registered trademark of SEI IdentificationSolutions Limited. Other products and brand names may be trademarks of their respective owners. The information on this datasheetis believed to be correct at the time of publishing. Specifications given in this publication are subject to change without notice.
:
:
:
WWW.SEI-ID.COM CABLE IDENTIFICATION RECOGNISED WORLDWIDE
SEIIDENTIFICATION
SOLUTIONS
Document last modified: 05-10-2017 11:50:39
HPD MILITARY SPECIFICATION SLEEVE 3:1DOUBLE-SIDED PRINTABLE HEATSHRINK SLEEVES 3:1 RATIO
Recommended Printer: -
Double Sided SumiTag Printer STP-XD4T-300-S-NC-S
Single Sided SumiTag Printer STP-SQX-300-S-NC-S
Recommended Ribbon: -
2020 Series Black
173 Series White
Print Performance: -
Adherence: SAE-AS5942
Fluid Resistance: MIL202 Method 215J
Store in original packaging
Recommended temp. at +10°C to 25°C 45-55% R.H.
Use within 3 years from date of manufacture
NOTE: HPD-180 series does not dimensionally
conform to SAE DTL 23053/5A
ADDITIONAL INFORMATION
SEI Identification Solutions Ltd
Pysons Road Industrial Estate
Broadstairs Kent CT10 2LQ UK
+44 (0) 1843 865241
+44 (0) 1843 867180
info@sei-id.com
t
f
e
©2015 SEI Identification Solutions Ltd. All rights reserved. The SEI Identification Solutions logo is a registered trademark of SEI IdentificationSolutions Limited. Other products and brand names may be trademarks of their respective owners. The information on this datasheetis believed to be correct at the time of publishing. Specifications given in this publication are subject to change without notice.
:
:
:
BUSINESS MANAGEMENT
ACCREDITATIONS
WWW.SEI-ID.COM CABLE IDENTIFICATION RECOGNISED WORLDWIDE
Registered in England No. 412829
Recommended