View
241
Download
2
Category
Tags:
Preview:
DESCRIPTION
tehnice si arhitecturale
Citation preview
Valid from 01-04-2012
Gültig ab 01-04-2012
LED CATALOGUELED KATALOG2012
RECESSED Wall mount luminaiRESWanDEinbaulEuChtEn
RECESSED inGRounD FittinGSboDEnEinbaulEuChtEn
RESiDEntial lanDSCapE luminaiRES on poStpollERlEuChtEn FüR DEn pRivatbEREiCh
Wall/CEilinG mount luminaiRES FoR GEnERal uSEWanD- unD DECkEnlEuChtEn
aluminiumaluminium
plaStiCkunStStoFF
easy maintenancewartungsfreundlich
Wall mount luminaiRES With liGht EFFECtSakzEntWanDlEuChtEn
Chip tonDo/ovalE p. 16
nikko+p. 26
auRa 28p. 24
EliSSa maXip. 30
Eko+ 19/21/26p. 20
GRaDuSp. 42
inSERt 1/2p. 36
GRaDuS RounDp. 38
GRaDuS SQuaREp. 38
GRaDuS StEElp. 40
DuplEXp. 32
aXEntp. 34
GRaDuS poStp. 44
Stilo+p. 48
paCkp. 46
z Following on from our first LED products, produced in the mid-nineties, designed to mark and light pedestrian pathways, the Performance in Lighting Group has adopted a renewed, electronic oriented philosophy of working. With our own on site laboratory and highly qualified personnel, we have developed LED fittings that are highly efficient, reliable and of high quality.Our close collaboration with the best lED manufacturers (CREE, CITIZEN, SEOUL, LUMILEDS and OSRAM), has combined with our expertise in the world of lighting fittings, enabling innovative solutions in terms of optical and thermal performance to be developed.The use of LEDs in the Performance in Lighting fittings has required research and development into new areas alongside electronics, which has resulted in the creation of efficient and reliable lighting fittings, as is the tradition of the Group.
z Nach den ersten Angeboten von LED-Produkten Mitte der Neunziger Jahre, die für die Anzeige und Beleuchtung von Fußwegen genutzt wurden, hat die Gruppe Performance in Lighting dank der Anwendung einer neuen, elektronikorientierten Arbeitsphilosophie und dank eines unternehmensinternen Labors mit hoch qualifiziertem Personal entschieden, effizientere und zuverlässigere LED-Leuchten von gleichbleibender Qualität entwickelt.Die enge Zusammenarbeit mit den besten lED-Herstellerunternehmen (CREE, CITIZEN, SEOUL, LUMILEDS, OSRAM) sowie unsere Kompetenz im Bereich von Beleuchtungssystemen haben es uns ermöglicht, innovative Lösungen bezüglich der optischen und thermischen Leistungen zu entwickeln.Der Einsatz von LED in den Leuchten von Performance in Lighting basiert auf intensiver forschungs- und Entwicklungsarbeit in einem neuen Bereich, der an den der Elektronik grenzt, und hat zur Realisierung effizienter und zuverlässiger Leuchten geführt – ganz, wie es Tradition bei der Gruppe ist.
a REnEWED philoSophy oF WoRkinGEinE nEuE aRbEitSphiloSophiE
What iS a lED?WaS iSt EinE lED?z A lED (light Emitting Diode) is an electronic component with a “P-N” semiconductor junction which, if a current passes through it, can emit photons in the form of light radiation. This phenomenon is called electroluminescence.Depending on the type of construction of the LED board, it can operate with either constant current or constant voltage.
z Eine lED (light Emitting Diode, dt.: lichtemittierende Diode) ist ein elektronisches Halbleiter-Bauelement mit p-n-Übergang, dass, wenn es von Strom durchflossen wird, Photonen in Form von Lichtstrahlung abgeben kann. Dieses Phänomen heißt Elektrolumineszenz.Je nach Bauweise der LED kann diese mit gleichstrom oder gleichspannung funktionieren.
cathode (–)Kathode (–)
zone NN-gebiet
anode (+)Anode (+)
zone PP-gebiet
6
thE aDvantaGES oF pERFoRmanCE in liGhtinG lED FittinGSz The advantages of Performance in Lighting LED fittings Performance in Lighting fittings have been developed in close collaboration with major LED manufacturers. This brings many benefits:
1. Careful design of the whole lED+thermal interface+heat sink+ballast system.2. Painstaking thermal monitoring of all LED developments which, compared to traditional light sources, require control and testing times that are 30% longer. This ensures reliability, durability, safety and photometric performance in line with sector standards.3. The development of high reflection aluminium optics, or high efficiency thermoplastic materials.4. An accurate heat dissipation system, tested and optimised in our laboratory at the research stage, able to respect and guarantee the performance and durability declared by LED manufacturers.5. The ability to provide intelligent products, designed to integrate with existing communication or bus management systems (such as DALI or DMX). 6. A consultancy and analysis service for special customer requests.7. The ability to simulate and develop specific optics, meeting the various design requirements and using dedicated software.8. The ability of our Technical Department to define the layouts of the printed circuit boards for LEDs as regards the materials, the insulation and the distances in air in accordance with industry standards.
DiE voRtEilE DER lED-lEuChtEn von pERFoRmanCE in liGhtinGz Die Leuchten von Performance In Lighting wurden in enger Zusammenarbeit mit den größten Herstellern von LED´s entwickelt. Es gibt zahlreiche Vorteile:
1. Eine sorgfältige Planung der Gruppe lED+thermische Schnittstelle+ wärmeableiter+Konverter.2. Eine gewissenhafte thermische Überwachung aller LED-Lösungen, die – im Gegensatz zu traditionellen Lichtquellen – um 30 % längere Kontroll- und Testzeiten benötigen. Dies garantiert Zuverlässigkeit, eine lange Lebensdauer, Sicherheit und photometrische Leistungen in Übereinstimmung mit den Normen.3. Die Entwicklung von linsen aus Aluminium mit hohem Reflexionsgrad oder aus thermoplastischem Material mit hoher Leistungsfähigkeit.4. Ein akkurates wärmeableitungssystem, dass in unserem Labor während der Phase der Forschung getestet und optimiert wurde und die von den LED-Herstellern angegebenen Leistungen und die Lebensdauer einhält und garantiert.5. Die Möglichkeit, intelligente Produkte anzubieten, die die aktuellen Kommunikations- oder Bussysteme (wie DALI oder DMX) ergänzen können. 6. Ein Beratungs- und Analyseservice für spezielle Kundenanfragen.7. Die Möglichkeit, mit speziellen Softwareanwendungen spezifische linsen zu entwickeln und zu simulieren, die verschiedenste Planungsanforderungen erfüllen können.8. Die Fähigkeit unserer technischen Abteilung, Leiterplattenlayouts für LED bezüglich der Materialien, Isolationen und Luftabstände in Übereinstimmung mit den Normen des Sektors zu definieren.
thermal interfaceThermische Schnittstelle
heat sinkWärmeableiter
ballastKonverter
connectorStecker
7
LED
z Whilst for fittings with traditional light sources, we speak about performance, for fittings with LED light sources, we use the term luminous efficacy, which indicates the ratio between the power absorbed and the amount of light emitted by the lighting fitting. Luminous efficacy is expressed in lumens/W (lm/W).An incandescent lamp has a luminous efficacy of 13-15 lm/W, while for a fluorescent lamp it is 60-70 lm/W and a gas discharge lamp 100-110 lm/W.The current luminous efficacy of a LED chip is approximately 130 lm/W, but as it is a source that is constantly evolving, we can still expect ongoing, significant improvement.
z Während man bei Leuchten mit traditionellen Lichtquellen von Leistung spricht, wird für Leuchten mit LED der Begriff Lichtausbeute verwendet, der den Quotient aus dem von einer lampe abgegebenen lichtstrom und der von ihr aufgenommenen leistung angibt. Die Lichtausbeute wird in Lumen pro Watt (lm/W) ausgedrückt.Eine Glühlampe verfügt über eine Lichtausbeute von 13-15 lm/W, eine Leuchtstofflampe von 60-70 lm/W und eine Entladungslampe von 100-110 lm/W.Die aktuelle Lichtausbeute einer Chip-LED liegt ungefähr bei 130 lm/W, aber da es sich um eine Lichtquelle handelt, die beständig weiterentwickelt wird, sind kontinuierliche und bedeutende Verbesserungen zu erwarten.
luminouS EFFiCaCyliChtauSbEutE
z Comparing LEDs with conventional light sources, you may notice that they consume about 80/90% less than traditional incandescent lamps and about 30/40% less than fluorescent lamps. From an energy saving viewpoint, we can say that LEDs, compared to traditional light sources with the same power consumption,
z Vergleicht man LED mit normalen Lichtquellen, so stellt man fest, dass die etwa 80-90 % weniger Energie als traditionelle Glühbirnen und etwa 30-40 % weniger Energie als Leuchtstofflampen verbrauchen. Im Hinblick auf die Energieersparnis können wir bestätigen, dass LED gegenüber traditionellen Lichtquellen und bei gleicher aufgenommener leistung
EnERGy SavinGSEnERGiEERSpaRniS
emit more light, or, with the same level of light emission, consume less.In addition, if used in a properly designed fitting with good heat dissipation, the LED ensures significant maintenance costs, with regards to its longer life and reduced disposal costs.
mehr licht ausstrahlen bzw. bei gleicher lichtausgabe weniger verbrauchen.Wenn sie hingegen zusammen mit einer korrekt geplanten Lampe mit einer ordentlichen Wärmeableitung verwendet werden, garantieren LED dank ihrer längeren Lebensdauer und dem Ausbleiben von Entsorgungskosten eine erhebliche Reduzierung der Wartungskosten.
INCANDESCENTGLÜHLAMPE
FLUORESCENTLEUCHTSTOFFLAMPEN
DISCHARGEENTLADUNGSLAMPE
8
13 lumen/Watt
60 lumen/Watt
100 lumen/Watt
LED130 lumen/Watt
z The luminous efficacy used to describe the LED board is measured in optimum operating conditions, without the constraints that inserting a lighting fitting inevitably involves. In fact, even in the presence of correct heat dissipation, we nevertheless experience a loss of output of 6-10% (poor dissipation can result in a loss of output of 50% and a reduction in the duration of the LEDs).Excessive temperature also affects the correct operation and durability of the driver, and leads to a reduction in the output of about 15%.If the LED light source requires an optic, we should expect a further decrease in output of 10-15%.In addition, LED manufacturers tend to highlight the luminous efficacy obtained with LEDs with cool colour temperatures, but warm tones cause a further drop in output of 10%.
z Die für die LED angegebene Lichtausbeute wird bei optimalen Betriebsbedingungen gemessen, ohne Berücksichtigung der Einflüsse, die das Einsetzen in eine Lampe unumgänglich mit sich bringt. So kommt es auch bei Vorhandensein einer korrekten Wärmeableitung zu einem Stromverlust von 6-10 % (bei einer schlechten Wärmeableitung sogar von 50 % und zu einer Verminderung der Lebensdauer der LED).Die übermäßige Temperatur beeinträchtigt auch die korrekte Funktionsweise und Lebensdauer des Konverters und führt zu einer Verminderung des Stroms um etwa 15 %.Wenn die LED-Lichtquelle eine Linse benötigt, ist eine Verringerung des Stroms um weitere 10-15 % zu erwarten.Außerdem neigen LED-Hersteller dazu, die Lichtausbeute
anzugeben, die mit LED mit kalten Farbtemperaturen erreicht werden, wobei wärmere Farbtemperaturen jedoch einen zusätzlichen Stromabfall von 10 % bewirken.Daraus folgt, dass eine lED-lampe 50-60 % des tatsächlich von den lED ausgestrahlten lichts ausstrahlen kann (oder LED-Module).Da die von den LED-Herstellern angegebenen lm/W theoretische Werte sind, muss man sich auf die tatsächlichen Leistungen der Leuchte konzentrieren.Es steht fest, dass keinerlei verbindung zwischen der leistungsstärksten lED und der leuchte mit den höchsten leistungen besteht, sondern dass es schlicht mehr oder weniger zuverlässige leuchten gibt, die das Ergebnis eines konsolidierten Unternehmens-Know-hows sind, welches präzise Preis- und Marktziele immer fest im Blick hat.
It follows that a lED light fitting can emit 50-60% of the actual light emitted by the lEDs (or LED modules).As the rated lm/W declared by the LED manufacturers is theoretical data, it is important to focus on the actual performance of the fitting.It is recognised that there is no correlation between a better performing lED and a better performing fitting, but there are simply fittings with varying levels of efficiency and reliability, the result of consolidated company expertise, which never loses sight of clear price and market objectives
losses due to the opticsverlust durch Linsen
losses due to dissipationverlust durch Zerstreuung
losses due to the driververlust durch den Konverter
losses due to warm colour temperatures (< 3,000 K)verlust durch warme Farbtemperaturen (< 3.000 K)
LumEn DEcLarED by thE LED manufacturErsVom LED-hErstELLEr angEgEbEnE LumEn
EnErgy saVingsEnErgiEErsparnis
EnErgy saVingsEnErgiEErsparnis
INCANDESCENTGLÜHLAMPE
FLUORESCENTLEUCHTSTOFFLAMPEN
Luminous EfficiEncy of thE Lighting fitting
LichtausbEutE DEr LEuchtE
9
50-60%
100%
10%15%10% 15%
LED 90%
40%
Performance in Lighting has developed different types of heat sink to adapt to the technical requirements of each product.
Performance in Lighting hat verschiedene Arten von Wärmeableitern entwickelt, die sich an die technischen Anforderungen aller Produkte anpassen lassen.
z In order to work with electrical and thermal parameters that safeguard its durability, the LED must have proper heat dissipation. Active or passive dissipation mechanisms must therefore be in place to ensure it is possible to extract the heat and then disperse into the fitting or surrounding environment as uniformly as possible. The correct thermal operating regime is achieved by developing supports with suitable dissipating geometries according to the type of LED, the material used, the fitting, the assembly position and its level of seal.The long-established on-site Performance in Lighting laboratory has been testing, researching and evolving in the field of electro-thermal LED measurements for ten years, with internal test protocols that go beyond the normal standards prescribed in the regulations.
z Damit die LED mit elektrischen und thermischen Parametern funktionieren kann, um eine lange Lebensdauer zu erhalten, muss sie über eine korrekte wärmeableitung verfügen. Es müssen daher aktive oder passive Vorrichtung für die Wärmableitung vorgesehen werden, die die Wärme möglichst gleichmäßig in der Leuchte oder ihrer Umgebung zerstreuen. Den richtigen thermischen Bereich für den Betrieb erreicht man durch die Entwicklung von Halterungen mit streuenden formen, die für den LED-Typ, das verwendete Material, die Lampe, ihre Montageposition und ihre Dichtigkeit geeignet sind.Das geschichtsträchtige, unternehmensinterne Labor von Performance In Lighting testet, forscht und entwickelt nun seit mehr als zehn Jahren im Bereich der elektrisch-thermischen Messungen die LED weiter, mit internen Testprotokollen die über die normalen, von den geltenden Normen vorgeschriebenen Standards hinausgehen.
hEat DiSSipationthERmiSChE StREuunG
10
z In order to achieve good heat dissipation, it is necessary to provide optimal conditions for coupling and heat transfer between the LED board and the heat sink itself.For this reason, Performance in Lighting LED fittings are equipped with specific thermal interfaces, known as gap fillers, positioned between the LED board and the heat sink device, to ensure perfect, continuous thermal contact between the two components.These gap fillers may be made using different materials and technologies according to the different thermal regimes, the nature of the materials and the environment in which the fitting is installed.Excessive temperatures have a negative effect on the duration of the LEDs, but also on electrical parameters such as the emitted wavelength, the colour temperature (CCT) of the LED, the direct voltage drop (Vf = Forward voltage) and its efficiency.To overcome this problem, the thermal resistance between the junction and the outside of the container must be as low as possible. For this reason, Performance In Lighting uses high-tech thermal interfaces, such as graphite or phase change material (PCTIM- Phase Change Thermal Interface Material).This is a special film interposed between the LED board and the heat sink which, once the operating temperature, has been reached, changes state (from solid to viscous), enabling perfect filling of all imperfections on the surface on which it rests. This therefore eliminates harmful “air bubbles”, typical of thermally conductive pastes, and the difficulties of applying the thermally conductive double-sided adhesive (a fingerprint on the double-sided adhesive compromises the effectiveness by more than 20%).
z Um eine ausreichende Wärmeableitung zu erhalten, müssen die optimalen Bedingungen für eine Verbindung und den Wärmeübergang zwischen der LED-Platte und dem Kühlkörper geschaffen werden.Aus diesem Grund sind die LED-Lampen von Performance in Lighting mit speziellen thermischen Schnittstellen ausgestattet, die so genannten Gap Filler, die zwischen der LED-Platte und der wärmeableitenden Vorrichtung positioniert werden und so für einen perfekten und dauerhaften Kontakt zwischen den beiden Komponenten sorgen.Diese Gap Filler können je nach thermischem Bereich, der Beschaffenheit der Materialien und der Umgebung der Lampe aus verschiedenen Materialien bestehen und unterschiedliche Technologien nutzen.Zu hohe Temperaturen beeinflussen nicht nur die Lebensdauer der LED negativ, sondern auch elektrische Parameter, wie die Länge der ausgegebenen Welle, die Farbtemperatur (CCT) der LED, den Abfall der Spannung in Durchlassrichtung (Vf = Forward Voltage) und die Leistungsfähigkeit.Um diesem Problem entgegen zu wirken, muss der thermische Widerstand zwischen der Verbindung und der Umgebung des Kühlkörpers so gering wie möglich sein. Aus diesem Grund verwendet Performance In Lighting hoch technisierte thermische Schnittstellen, wie graphit oder Phasenwechselmaterial (PCTIM- Phase Change Thermal Interface Material).Es handelt sich um eine spezielle Folie, die zwischen LED-Platine und den Wärmeableiter gelegt wird, und nach Erreichen der Betriebstemperatur den Zustand ändert (von fest zu viskos), wodurch Unebenheiten auf den Oberflächen der beiden Elemente,
thERmal intERFaCES (thERmal manaGEmEnt)thERmiSChE SChnittStEllE (thERmal manaGEmEnt)
auf denen sie aufliegt, perfekt ausgefüllt werden. Es werden so schädliche „Luftbläschen“, die typisch für wärmeleitfähige Pasten sind, und Anwendungsschwierigkeiten von wärmeleitfähigem doppelseitigem Klebeband beseitigt ( z.b. ein Fingerabdruck auf doppelseitigem Klebeband beeinträchtigt seine Leistungsfähigkeit bereits um 20 %).
11
z Power-LEDs generally come in two types: as a point source or as a module. Both types, depending on their characteristics, can be integrated into a particular design or optic designed for a specific purpose.These narrow or wide beam optics consequently modify the beam of light emitted, unless action is taken by designing an optic to achieve asymmetric beams that perform many different tasks (street lighting, wall-washer...) Each photometric curve released is the result of photometric surveys and analysis carried out in the PIL Group photometric laboratories, equipped with two “T2” and one “moving head” goniophotometers.
z Power-LEDs (oder Hochleistungs-LEDs) sind in der Regel in zwei Ausführungen erhältlich: als Punktstrahler oder als Modul. Beide Typen können, je nach ihren Eigenschaften, in ein spezielles Design oder in speziell bearbeitete Linsen integriert werden.Diese konzentrischen oder streuenden linsen ändern folglich die Ausstrahlung des lichts, es sei denn, man verhindert dies mit einer entsprechenden Design der Linse, um asymmetrische Ausstrahlung zu erhalten, die die verschiedensten Aufgaben bewältigen können (Straßenbeleuchtung, Wandfluter,…) Jede photometrische Kurve ist das Ergebnis photometrischer Messungen und Analysen, die in den photometrischen labors der Gruppe PIL durchgeführt werden, welches über zwei Goniophotometer vom Typ „T2 “und eines mit beweglichem Kopf verfügt.
optiCSlinSEn
z Unlike conventional light sources, with LEDs, you can choose the shade of white light that best suits the various environments of use.
Cool white shade(cool white: > 5,000 K)This is particularly suitable for outdoor applications, for high flux and high brilliance.
warm white shade (warm white: < 3,300 K)This is a comfortable warm light which, by mimicking the emission of the incandescence, adapts to indoor environments.
Neutral white shade (neutral white: 3,300/5,000 K)This is the right balance between brightness, tone and colour rendering, often required when adding to or combining with existing light sources.
lED light is nevertheless always free of ultraviolet or infrared emissions: ensures high colour rendering and does not cause colour change on the illuminated element. The place, the object to be illuminated or enhanced, the way in which the light is diffused and the desired result naturally have a direct impact on the type of light to be used.
z Im Gegensatz zu traditionellen Lichtquellen gestatten LED die Auswahl des Weißtons, der für die jeweilige Anwendung am besten geeignet ist.
Der Ton Cool white(Kaltweiß: > 5.000 K)Dieser eignet sich besonders gut für Außenanwendungen, für einen hohen Strom und hohen Glanz.
Der Ton warm white (Warmweiß: < 3.300 K)Ein komfortables, warmes Licht, dass die Lichtleistung begrenzt und sich so gut für Innenräume eignet.
Der Ton Neutral white(Warmweiß: 3.300/5.000 K) Der richtige Kompromiss zwischen Helligkeit, Farbtemperatur und Farbwiedergabe; wird oft für Kombinationen oder Ergänzungen bereits vorhandener Lichtquellen verwendet. Die lED-lampe ist in jedem fall frei von ultraviolett- oder ultraschallstrahlungen: sie gestattet daher eine ausgezeichnete Farbwiedergabe ohne Veränderung der Farbe im Leuchtelement. Natürlich beeinflussen der Ort, das zu beleuchtende oder hervorzuhebende Objekt oder die Art der Lichtverbreitung direkt das zu verwendende Licht.
thE ColouRS oF WhitEWEißtönE
12
180 120
75
60
45
105
90
01530 3015
0° - 180° 90° - 270°
75
60
45
105
90
7000
14000
21000
35000
28000
cd/klm
angoli gamma
z Continuing with our tradition based on the reliability of the product, service, safety and security, we took on the challenge and opportunities offered by these new light sources.For Performance in Lighting, it has always been a priority to ensure a technically advanced, reliable and safe product, with performance that meets the expectations of our customers.Many of the group’s long-established products were therefore studied and suitably modified to combine tradition with technological innovation.
z Ohne von unserer Tradition, die auf der Zuverlässigkeit des Produktes und des Services, der Sicherheit und der Garantie basiert, abzuweichen, haben wir die Herausforderung und die Chancen angenommen, die diese neuen lichtquellen bieten.Für Performance In Lighting hat die Garantie eines technisch fortschrittlichen, zuverlässigen und sicheren Produktes mit Leistungen, die die Erwartungen unserer Kunden erfüllen, seit jeher Vorrang.viele geschichtsträchtige Produkte der gruppe wurden daher weiterentwickelt und entsprechend verändert,
tRaDition REnEWEDtRaDition im innovativEn GEWanD
We are now able to offer solutions with MulTICHIP-lED light sources (easy solution) and ensure effective energy savings, obtained by complying with the quality and performance-related targets that make Performance in Lighting stand out.Thanks to a long testing period in the laboratory, even for the classic products now available in a LED version, Performance in Lighting offers a 5-year warranty on performance and reliability.
um die Tradition mit der technologischen Innovation zu verbinden. Heute sind wir in der Lage, Lösungen mit MulTICHIP-lED-Lichtquellen (easy solution) anzubieten und eine effektive Energieersparnis ohne Beeinträchtigung der angestrebten Leistungsfähigkeit und Qualität zu garantieren, die Performance in Lighting auszeichnen.Dank einer langen Testarbeit im Labor bietet Performance In Lighting auch für die klassischen Produkte, die heute in der LED-Ausführung erhältlich sind, 5 Jahre garantie auf Leistungen und Zuverlässigkeit.
Some examples of LED boards used in Performance in Lighting fixtures. Einige Beispiele für LED-Karten, die im Inneren der Leuchten von Performance in Lighting zum Einsatz kommen.
Heat sink with LED boards and thermocouples inserted for laboratory tests.
Wärmeableiter mit LED-Karten und Thermoelementen, die für Labortests eingesetzt wurden.
13
ChEapER RunninG CoStSWiRtSChaFtliChE aSpEktE
FLUORESCENTLEUCHTSTOFFLAMPEN
none/keiner
4 times/mal
10 times/malHALOGENHALOGENLAMPEN
z Against a higher initial cost, LED fittings provide savings over time in terms of both system maintenance costs, dramatically reducing the need to replace the light sources, and energy consumption.
z LED-Leuchten haben zwar höhere Anfangskosten, gestatten dann aber im Laufe der Zeit eine Ersparnis, sowohl bei den Wartungskosten der Anlage, da der Bedarf an einem Austausch der Lichtquellen drastisch gesenkt wird, als auch beim Energieverbrauch.
lAMP REPlACEMENTlAMPENwECHSEl
RuNNINg CoSTSvERwAlTuNgSKoSTEN
(12 hours of operation per day x 10 years)(12 Betriebsstunden pro Tag für 10 Jahre)
initial investmentanfangsinvestition
energy costsenergiekosten
maintenance costswartungskosten
z Fittings modified to accommodate the LEDs are designed for direct connection to the mains, without the need for ballasts or external transformers.This means they are easy to replace, where necessary, in place of fittings with conventional light sources without any change to the existing electrical systems.
z Die für die Aufnahme von LED veränderten Leuchten sind für den direkten Anschluss an das Stromnetz vorbereitet, ohne dass externe Netzteile oder Transformatoren benötigt werden.Sie können so, wo erforderlich, einfach mit Leuchten mit traditionellen Lichtquellen ersetzt werden, ohne dass dazu Änderungen an den bestehenden elektrischen Anlagen erforderlich sind.
EaSy inStallationEinFaChE inStallation
direct power supply direkte Versorgung
220/240 v
yearsjahren
inin
14
dddddddddd
p pp p
LED
-23%
-43%
LED
All information presented in this catalogue may be subject to modification. The company reserves the right to make any changes if necessary without prior notice. Partial or complete reproduction of this catalogue is prohibited.
Technische Angaben sowie Beschreibungen und Abbildungen des Kataloges sind unverbindlich. Änderungen bleiben vorbehalten. Die Reproduktion des Katalogs, auch auszugswei-se, ist verboten.
;ENEC marked luminaires and components have been tested by a Third Party Certification Laboratory to European safety and performance norms. Companies which offer ENEC marked products also apply a Quality System which conforms to the requirements of UNI EN ISO 9002.
Beleuchtungskörper, die mit dem ENEC-Zeichen versehen sind, wurden von einer dritten zertifi-zierenden Prüfstelle für europäische Sicherheit und Leistung überprüft. Firmen, die ENEC-Pro-dukte anbieten, verfügen über ein Qualitätssy-stem, welches mindestens der Norm UNI EN ISO 9002 entspricht.
OAll products which are subject to European Directive 95/2001 bear the mark CE.
Alle Produkte, die unter die Europäischen Direktiven 95/2001 fallen, sind mit dem Zeichen CE versehen.
Performance in Lighting has been a member of Consorzio Ecolight (n. 0029) since 2004.
Performance in Lighting ist seit 2004 Mitglied des Verbands Consorzio Ecolight - Nr. 0029.
Concept, art work, image editing and lay-outGestaltung, Design und Lay-Out Boutique Creativa \\ Visual Design \\ Milano - Barcelona www.boutique-creativa.com
PhotographsFotos/ Bildmaterial Archivio Prisma Luca Steffenoni (VR) Matteo Cirenei (MI) Luca Ugolini - Massimo Scavazzini (Boutique Creativa - MI)
15
24 AURA 34 AXENT 16 CHIP TONDO 25/30 16 CHIP OVALE 25/30 32 DUPLEX 20 EKO+ 19/21/26 30 ELISSA MAXI 42 GRADUS 44 GRADUS POST 38 GRADUS ROUND 38 GRADUS SQUARE 40 GRADUS STEEL 36 INSERT 26 NIKKO+ 46 PACK 48 STILO+
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
Wand- und Deckenleuchten für den Innen- und Außenbereich, bestehend aus:¬ Gehäuse und Ring aus Technopo-
lymer¬ Wärmeableiter aus Aluminium¬ Diffusor aus Pressglas mit lackier-
ter Innenseite¬ LED-Modelle mit 1 LED Array
4000 K erhältlich, inklusive Konverter
¬ Thermische Schnittstelle mit Phasenwechsel
¬ Äußere Schrauben aus Edelstahl¬ Das 960°C-Modell wird für den
französischen Markt gefertigt und nur dort vertrieben
Range of indoor and outdoor wall- and ceiling-mounted fixtures, composed of:¬ Technopolymer body and ring¬ Aluminium heat sink¬ Pressed glass diffuser, painted
inside¬ LED versions available with 1
Array 4000 K LED, complete with driver
¬ Phase change thermal interface¬ Stainless steel fastening screws¬ The 960 °C version is produced
and distributed for the French market
Chip tonDo 25 lED ESPower LED/Power LED1 LED - 9,5 W WH1+WHL I 4000 301421 1 LED - 9,5 W GR3+WHL I 4000 301423 1 LED - 9,5 W BK1+WHL I 4000 301422 Chip tonDo 25 960° lED ESPower LED/Power LED1 LED - 9,5 W WH1+WHL I 4000 301418 1 LED - 9,5 W BK1+WHL I 4000 301419
Chip tonDo lEDdesign Roberto Fiorato
ø 248 121
IP 55
class I
IK06 1J xx3
C
F
F IK06 1J xx3p1x13 W
n. 1 LED9,5 W
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
bk1+WHLbLack+white Led
Schwarz+weiSS Led
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
DoubLE sWitch-onGEtrEnntE
schaLtbarkEit
z see GENERAL CATALOGUE for other fixtures and poles
z Weitere Leuchten und Pfosten finden Sie im HAUPTKATALOG
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Chip tonDo 30 lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301424 1 LED - 13,5 W GR3+WHL I 4000 301428 1 LED - 13,5 W BK1+WHL I 4000 301426 Chip tonDo 30 960° lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301425 1 LED - 13,5 W BK1+WHL I 4000 301427
Chip tonDo 30 lED ES DaPower LED/Power LED1+1 LED - 13,5 W+1,1 W WH1+WHL I 4000 301555 1+1 LED - 13,5 W+1,1 W GR3+WHL I 4000 301557 1+1 LED - 13,5 W+1,1 W BK1+WHL I 4000 301556 Chip tonDo 30 960° lED ES DaPower LED/Power LED1+1 LED - 13,5 W+1,1 W WH1 I 4000 301558 1+1 LED - 13,5 W+1,1 W BK1 I 4000 301559
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
17
ø 288 140
ijpb
CHIP TONDO 2526,5 x 12,6 x 26,7 cm(master x 1)
78
84
30 84
ø 15
CHIP TONDO 3014,6 x 28,8 x 28,8 cm(master x 1)
84
8430
98
ø 15
F IK06 1J xx3p1x18 W
n. 1 LED13,5 W
F IK06 1J xx3
n. 1+1 LED13,5 W+1,1 W
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
bk1+WHLbLack+white Led
Schwarz+weiSS Led
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Wand- und Deckenleuchten für den Innen- und Außenbereich, bestehend aus:¬ Gehäuse, Ring und Grill-Blende
aus Technopolymer¬ Wärmeableiter aus Aluminium¬ Diffusor aus Pressglas mit lackier-
ter Innenseite¬ LED-Modelle mit 1 LED-Array
4000 K erhältlich, inklusive Konverter
¬ Thermische Schnittstelle mit Phasenwechsel
¬ Äußere Schrauben aus Edelstahl¬ Das 960°C-Modell wird für den
französischen Markt gefertigt und nur dort vertrieben
Range of indoor and outdoor wall- and ceiling-mounted fixtures, composed of:¬ Technopolymer body, ring and
screen¬ Aluminium heat sink¬ Pressed glass diffuser, painted
inside¬ LED versions available with 1
Array 4000 K LED, complete with driver
¬ Phase change thermal interface¬ Stainless steel fastening screws¬ The 960 °C version is produced
and distributed for the French market
Chip ovalE 25 lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301387 1 LED - 10 W GR3+WHL I 4000 301388 1 LED - 10 W BK1+WHL I 4000 301389 Chip ovalE 25 960° lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301390 1 LED - 10 W BK1+WHL I 4000 301391
Chip ovalE 30 lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301400 1 LED - 13,5 W GR3+WHL I 4000 301401 1 LED - 13,5 W BK1+WHL I 4000 301402
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
18
ijpb
Chip ovalE lEDdesign Roberto Fiorato
260 121
157
IP 55
class I
IK06 1J xx3
C
F
CHIP OVALE 2527,3 x 12,7 x 16,2 cm(master x 1)
30 84
84
69ø 15
F IK06 1J xx3
310 140
184
95
84
33 84
ø 15
CHIP OVALE 3033,6 x 14,6 x 18,6 cm(master x 1)
F IK06 1J xx3
p1x13 W
n. 1 LED10 W
p1x13 W
n. 1 LED13,5 W
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
z see GENERAL CATALOGUE for other fixtures and poles
z Weitere Leuchten und Pfosten finden Sie im HAUPTKATALOG
Chip ovalE 25 lED ES GRillPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301611 1 LED - 10 W GR3+WHL I 4000 301612 1 LED - 10 W BK1+WHL I 4000 301613 Chip ovalE 25 960° lED ES GRillPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301614 1 LED - 10 W BK1+WHL I 4000 301615
Chip ovalE 30 lED ES GRillPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301616 1 LED - 13,5 W GR3+WHL I 4000 301617 1 LED - 13,5 W BK1+WHL I 4000 301618
F IK06 1J xx3
F IK06 1J xx3
p1x13 W
n. 1 LED10 W
p1x13 W
n. 1 LED13,5 W
260 123
157
310 143
184
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Wand- und Deckenleuchten für den Innen- und Außenbereich, bestehend aus:¬ Gehäuse, Ring und Blende aus lackiertem
Aluminiumdruckguss¬ Wärmeableiter aus Aluminium¬ Diffusor aus Pressglas mit satinierter Innensei-
te¬ Die Modelle PC sind mit Diffusor aus vandalen-
sicherem, mattem Technopolymer versehen, Flammwidrigkeit: Glühdrahtprüfung 960°C
¬ Dichtung aus EPDM¬ LED-Modelle mit 1 LED Array 4000 K erhältlich,
inklusive Konverter ¬ Thermische Schnittstelle mit Phasenwechsel¬ Äußere Schrauben aus Edelstahl
Range of indoor and outdoor wall- and ceiling-mounted fixtures, composed of:¬ Painted die-cast aluminium body, ring and
screens¬ Aluminium heat sink¬ Pressed glass diffuser, frosted inside¬ The PC versions are equipped with vandal-
resistant opal technopolymer diffuser, 960 °C glow wire
¬ EPDM gasket¬ LED versions available with 1 Array 4000 K LED,
complete with driver ¬ Phase change thermal interface¬ Stainless steel fastening screws
Eko+19 lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301381 1 LED - 10 W GR2+WHL I 4000 301382 1 LED - 10 W AN3+WHL I 4000 301383
Eko+19 pC lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301384 1 LED - 10 W GR2+WHL I 4000 301385 1 LED - 10 W AN3+WHL I 4000 301386
20
Eko+ lEDdesign Roberto Fiorato
IP 66
class I
IK07 2J xx5 IK10 20J xx9
C
F
y
188 126
255
F IK07 2J xx5
F IK10 20J xx9
p1x18 W
n. 1 LED10 W
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE GR2+WHLgLoSS metaLLic grey+white Led
grau metaLLic, poLiert +weiSS Led
WH1+WHLwhite+white Led weiSS+weiSS Led
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
z see GENERAL CATALOGUE for other fixtures
z Weitere Leuchten finden Sie im HAUPTKATALOG
Eko+19/G lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301643 1 LED - 10 W GR2+WHL I 4000 301644 1 LED - 10 W AN3+WHL I 4000 301645
Eko+19/G pC lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301646 1 LED - 10 W GR2+WHL I 4000 301647 1 LED - 10 W AN3+WHL I 4000 301648
Eko+19 GRill lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301649 1 LED - 10 W GR2+WHL I 4000 301650 1 LED - 10 W AN3+WHL I 4000 301651
Eko+19 GRill pC lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301652 1 LED - 10 W GR2+WHL I 4000 301653 1 LED - 10 W AN3+WHL I 4000 301654
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
21
ijb
EKO+ 1919,2 x 13,9 x 25,6 cm(master x 1)
27
46
171
F IK07 2J xx5
F IK10 20J xx9
p1x18 W
n. 1 LED10 W
188 136
255
188
136
255
F IK07 2J xx5
F IK10 20J xx9
p1x18 W
n. 1 LED10 W
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTAND
PACKAGE SIZE / VERPACKUNGSMAßE
Eko+21 lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301394 1 LED - 10 W GR2+WHL I 4000 301396 1 LED - 10 W AN3+WHL I 4000 301398
Eko+21 pC lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301395 1 LED - 10 W GR2+WHL I 4000 301397 1 LED - 10 W AN3+WHL I 4000 301399
Eko+21/G lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301619 1 LED - 10 W GR2+WHL I 4000 301620 1 LED - 10 W AN3+WHL I 4000 301621
Eko+21/G pC lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301622 1 LED - 10 W GR2+WHL I 4000 301623 1 LED - 10 W AN3+WHL I 4000 301624
Eko+21 GRill lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301625 1 LED - 10 W GR2+WHL I 4000 301626 1 LED - 10 W AN3+WHL I 4000 301627
Eko+21 GRill pC lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301628 1 LED - 10 W GR2+WHL I 4000 301629 1 LED - 10 W AN3+WHL I 4000 301630
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
22
EKO+ 2123,8 x 13,7 x 23,9 cm(master x 1)
8
38
5
39
224
ø 241 125
F IK07 2J xx5
F IK10 20J xx9
p1x18 W
n. 1 LED10 W
EKO+ 2629,2 x 13,2 x 29,3 cm(master x 1)
29
5
75
271
F IK07 2J xx5
F IK10 20J xx9
ø 241 137
p1x18 W
n. 1 LED10 W
F IK07 2J xx5
F IK10 20J xx9
p1x18 W
n. 1 LED10 W
ø 24
113
7
IP 66
class I
IK07 2J xx5 IK10 20J xx9
C
F
y
ijb
GR2+WHLgLoSS metaLLic grey+white Led
grau metaLLic, poLiert +weiSS Led
WH1+WHLwhite+white Led weiSS+weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
DoubLE sWitch-onGEtrEnntE
schaLtbarkEit
DoubLE sWitch-onGEtrEnntE
schaLtbarkEit
Eko+26 lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301403 1 LED - 13,5 W GR2+WHL I 4000 301405 1 LED - 13,5 W AN3+WHL I 4000 301407
Eko+26 pC lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301404 1 LED - 13,5 W GR2+WHL I 4000 301406 1 LED - 13,5 W AN3+WHL I 4000 301408
Eko+26 lED ES DaPower LED/Power LED1+2 LED - 13,5 W+2,2 W WH1+WHL I 4000 301429 1+2 LED - 13,5 W+2,2 W GR2+WHL I 4000 301430 1+2 LED - 13,5 W+2,2 W AN3+WHL I 4000 301431
Eko+26 pC lED ES DaPower LED/Power LED1+2 LED - 13,5 W+2,2 W WH1+WHL I 4000 301432 1+2 LED - 13,5 W+2,2 W GR2+WHL I 4000 301433 1+2 LED - 13,5 W+2,2 W AN3+WHL I 4000 301434
Eko+26/G lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301631 1 LED - 13,5 W GR2+WHL I 4000 301632 1 LED - 13,5 W AN3+WHL I 4000 301633
Eko+26/G pC lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301634 1 LED - 13,5 W GR2+WHL I 4000 301635 1 LED - 13,5 W AN3+WHL I 4000 301636
Eko+26/G lED ES DaPower LED/Power LED1+2 LED - 13,5 W+2,2 W WH1+WHL I 4000 301637 1+2 LED - 13,5 W+2,2 W GR2+WHL I 4000 301638 1+2 LED - 13,5 W+2,2 W AN3+WHL I 4000 301639
Eko+26/G pC lED ES DaPower LED/Power LED1+2 LED - 13,5 W+2,2 W WH1+WHL I 4000 301640 1+2 LED - 13,5 W+2,2 W GR2+WHL I 4000 301641 1+2 LED - 13,5 W+2,2 W AN3+WHL I 4000 301642
23
ø 293 119
F IK07 2J xx5
F IK10 20J xx9
p1x26 W
n. 1 LED13,5 W
F IK07 2J xx5
F IK10 20J xx9
n. 1+2 LED13,5 W+2,2 W
ø 293 130
F IK07 2J xx5
F IK10 20J xx9
p1x26 W
n. 1 LED13,5 W
F IK07 2J xx5
F IK10 20J xx9
n. 1+2 LED13,5 W+2,2 W
Wand- und Deckenleuchten für den Innen- und Außenbereich, bestehend aus:¬ Gehäuse und Ring aus Technopo-
lymer¬ Wärmeableiter aus Aluminium¬ Diffusor aus Pressglas mit lackier-
ter Innenseite¬ Öffnung von ¼ Umdrehung für
eine leichtere Installation¬ LED-Modelle mit 1 LED Array
4000 K erhältlich, inklusive Konverter
¬ Thermische Schnittstelle mit Phasenwechsel
¬ Äußere Schrauben aus Edelstahl¬ Das 960°C-Modell wird für den
französischen Markt gefertigt und nur dort vertrieben
¬ Das 750°C-Modell wird für alle anderen Märkte gefertigt.
Range of indoor and outdoor wall- and ceiling-mounted fixtures, composed of:¬ Technopolymer body and ring¬ Aluminium heat sink¬ Pressed glass diffuser, painted
inside¬ ¼ turn opening for easier instal-
lation¬ LED versions available with 1
Array 4000 K LED, complete with driver
¬ Phase change thermal interface¬ Stainless steel fastening screws¬ The 960 °C version is produced
and distributed for the French market
¬ The 750 °C version is produced and distributed for all other markets
24
auRa lEDdesign Roberto Fiorato
IP 44
class I
IK09 10J xx7
CF
PACKAGE SIZE / VERPACKUNGSMAßE DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTAND
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
IV1+WHLivory white+white Led
eLfenbein+weiSS Led
bk1+WHLbLack+white Led
Schwarz+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
z see GENERAL CATALOGUE for other fixtures
z Weitere Leuchten finden Sie im HAUPTKATALOG
auRa 28 750° lED ESPower LED/Power LED1 LED - 9,5 W IV1 I 4000 301376 1 LED - 9,5 W GR3 I 4000 301380 1 LED - 9,5 W BK1 I 4000 301378 auRa 28 960° lED ESPower LED/Power LED1 LED - 9,5 W IV1 I 4000 301376 1 LED - 9,5 W GR3 I 4000 301380 1 LED - 9,5 W BK1 I 4000 301378
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
25
F IK09 10J xx7
p1x13 W
n. 1 LED9,5 W
107
ø 28
0
ijb
AURA 2828 x 10,5 x 28 cm(master x 1)
82
22 8467 90
84
67
90
ø 15
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
Rb1+WHLruSt brown+white Led roStfarbig+weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
Leuchten für die Wand-, Konsolen-, Decken- und Pollermontage für den Innen- und Außenbereich, bestehend aus:¬ Gehäuse, Ring und Blende aus
lackiertem Aluminiumdruckguss¬ Wärmeableiter aus Aluminium¬ Diffusor aus Pressglas mit lackier-
ter Innenseite, am Ring befestigt¬ Dichtung aus Polymerschaum-
stoff¬ LED-Modelle mit 1 LED-Array
4000 K erhältlich, inklusive Konverter
¬ Thermische Schnittstelle mit Phasenwechsel
¬ Äußere Schrauben aus Edelstahl
Range of indoor and outdoor wall-, shelf-, ceiling- and pole-mounted fixtures, consisting of:¬ Painted die-cast aluminium
body, ring and screens¬ Aluminium heat sink¬ Pressed glass diffuser, painted
inside integral with the ring¬ Polymer foam gasket¬ LED versions available with 1
Array 4000 K LED, complete with driver
¬ Phase change thermal interface¬ Stainless steel fastening screws
nikko+21 lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301409 1 LED - 10 W GR3+WHL I 4000 301410 1 LED - 10 W AN3+WHL I 4000 301411 1 LED - 10 W RB1+WHL I 4000 301412
nikko+21/G lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301655 1 LED - 10 W GR3+WHL I 4000 301656 1 LED - 10 W AN3+WHL I 4000 301657 1 LED - 10 W RB1+WHL I 4000 301658
nikko+21/vv lED ESPower LED/Power LED1 LED - 10 W WH1+WHL I 4000 301659 1 LED - 10 W GR3+WHL I 4000 301660 1 LED - 10 W AN3+WHL I 4000 301661 1 LED - 10 W RB1+WHL I 4000 301662
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
26
nikko+ lEDdesign Roberto Fiorato
ijpb
IP 65
class I
IK05 0,70J xx3 IK06 1J xx3
C
F
F IK05 0,7J xx3
p1x13 W
n. 1 LED10 W
213 130
148
213 130
148
213
130
148
F IK05 0,7J xx3
p1x13 W
n. 1 LED10 W
F IK05 0,7J xx3p1x13 W
n. 1 LED10 W
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTAND
PACKAGE SIZE / VERPACKUNGSMAßE
z see GENERAL CATALOGUE for other fixtures and poles
z Weitere Leuchten und Poller finden Sie im HAUPTKATALOG
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
27
NIKKO+ 2127,3 x 12,7 x 16,2 cm(master x 1)
90
80
67
77
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
nikko+27 lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301413 1 LED - 13,5 W GR3+WHL I 4000 301414 1 LED - 13,5 W AN3+WHL I 4000 301415 1 LED - 13,5 W RB1+WHL I 4000 301416
28
F IK06 1J xx3
p1x26 W
n. 1 LED13,5 W
275 142
182IP 65
class I
IK05 0,70J xx3 IK06 1J xx3
C
F
ijpb
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
Rb1+WHLruSt brown+white Led roStfarbig+weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
nikko+27/G lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301663 1 LED - 13,5 W GR3+WHL I 4000 301664 1 LED - 13,5 W AN3+WHL I 4000 301665 1 LED - 13,5 W RB1+WHL I 4000 301666
nikko+27/vv lED ESPower LED/Power LED1 LED - 13,5 W WH1+WHL I 4000 301667 1 LED - 13,5 W GR3+WHL I 4000 301668 1 LED - 13,5 W AN3+WHL I 4000 301669 1 LED - 13,5 W RB1+WHL I 4000 301670
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
29
18,5 x 14,4 x 27,8 cm(master x 1)
148
90
67
108
F IK06 1J xx3
p1x26 W
n. 1 LED13,5 W
275 14218
2
275
142
182
F IK06 1J xx3
p1x26 W
n. 1 LED13,5 W
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
DoubLE sWitch-onGEtrEnntE
schaLtbarkEit
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Wandleuchte für den Innen- und Außenbereich, bestehend aus:¬ Gehäuse aus lackiertem Aluminiumdruckguss¬ Diffusor aus Pressglas mit lackierter Innenseite ¬ Wärmeanleitsystem aus Aluminium¬ Silikondichtung¬ LED-Modelle mit 1 LED Array 4000 K erhältlich,
inklusive Konverter ¬ Thermische Schnittstelle mit Phasenwechsel¬ Äußere Schrauben aus Edelstahl¬ Die Modelle DA sind Modelle mit Doppelschal-
tung: 1 LED-Array für allgemeine Beleuchtung + einzelne LED für Zusatzbeleuchtung
Indoor and outdoor wall-mounted fixture, consisting of:¬ Painted die-cast aluminium body¬ Pressed glass diffuser, painted inside ¬ Aluminium heat dissipation system¬ Silicone gasket¬ LED versions available with 1 Array 4000 K LED,
complete with driver ¬ Phase change thermal interface¬ Stainless steel fastening screws¬ The DA versions are dual power switch ver-
sions with 1 Array LED for general light + single LED for service light
EliSSa maXi RinG lEDPower LED/Power LED1 LED - 9,9 W WH1+WHL I 4000 3015135 1 LED - 9,9 W GR3+WHL I 4000 3015145 1 LED - 9,9 W AN3+WHL I 4000 3015155
EliSSa maXi RinG lED DaPower LED/Power LED1+1 LED - 10 W+1,1 W WH1+WHL I 4000 3015165 1+1 LED - 10 W+1,1 W GR3+WHL I 4000 3015175 1+1 LED - 10 W+1,1 W AN3+WHL I 4000 3015185
For the LED version with 3000 K colour temperature, add “6” to the end of the corresponding code for the 4000 K version. An 8 Euro surcharge applies.Fügen Sie für die LED-Version mit einer Farbtemperatur von 3000 K die Ziffer 6 hinten an den Code für 4000 K an. Der Aufpreis beträgt 8 Euro.
30
EliSSa maXi lEDdesign R. Fiorato - F. Pagliarini
25 x 14 x 36,5 cm(master x 1)
127
358
233
164
677583
91
IP 65
class I
IK07 2J xx3
C
F
F IK07 2J xx3
F IK07 2J xx3
n. 1 LED9,9 W
n. 1+1 LED10 W+1,1 W
Cage screen/Gitter WH1 310347 Cage screen/Gitter GR3 310348 Cage screen/Gitter AN3 310349 Split /Split WH1 310341 Split /Split GR3 310342 Split /Split AN3 310343 Plate/Platte SS1 310350 Visa/Blende WH1 310344 Visa/Blende GR3 310345 Visa/Blende AN3 310346
CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
¬ die-cast aluminium visa, split and cage screen in white, grey and anthracite
¬ stainless steel plate
¬ Blende, Split und Gitter aus Aluminiumdruckguss, weiß, grau und anthrazit lackiert
¬ Platte aus Edelstahl
ACCESSoRIES ZuBEHöR
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
ss1SiLver SiLber
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
31
ijb
310347310348310349
310344310345310346
310341310342310343
358
310
457
127
310350
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Wandleuchte für den Innen- und Außenbereich, bestehend aus:¬ Gehäuse und Ring aus Alumini-
um¬ Wärmeableiter aus Aluminium¬ Diffusor aus Glas ¬ Dichtungen aus EPDM¬ Modelle mit weißen LED 3000
K und 6000 K erhältlich mit Linsen für die Schwenkung des Lichtstrahls um 12° und elliptisch 15°x45°
¬ Äußere Schrauben aus Edelstahl
Indoor and outdoor wall-mounted fixture, consisting of:¬ Aluminium body and rings¬ Aluminium heat sink¬ Glass diffuser ¬ EPDM gaskets¬ Versions with white 3000 K and
6000 K LEDs available with lenses for 12° and 15° x 45° elliptical beam orientation
¬ Stainless steel fastening screws
DuplEX mono hp lED 12°Power LED/Power LED1 LED - 8,8 W WH1+WHL I 6000 3013705 1 LED - 8,8 W GR3+WHL I 6000 3013715 1 LED - 8,8 W AN2+WHL I 6000 3013725 1 LED - 8,8 W WH1+WHL I 3000 3013735 1 LED - 8,8 W GR3+WHL I 3000 3013745 1 LED - 8,8 W AN2+WHL I 3000 3013755
DuplEX mono hp lED 15/45°Power LED/Power LED1 LED - 8,8 W WH1+WHL I 6000 3013675 1 LED - 8,8 W GR3+WHL I 6000 3013685 1 LED - 8,8 W AN2+WHL I 6000 3013695 1 LED - 8,8 W WH1+WHL I 3000 3013645 1 LED - 8,8 W GR3+WHL I 3000 3013655 1 LED - 8,8 W AN2+WHL I 3000 3013665
32
IP 65
class I
IK08 5J xx5
C
F
G
DuplEX lEDdesign R. Fiorato - F. Pagliarini
F IK08 5J xx5
F IK08 5J xx5
100
151 100
352
9596
12°
15°x45°
n. 1 LED8,8 W
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
AN2+WHLgLoSS met. anthracite
+white Led anthrazit met. poLiert
+weiSS Led
z see GENERAL CATALOGUE for poles
z Weitere Poller finden Sie im HAUPTKATALOG
DuplEX hp lED 12°Power LED/Power LED2 LED - 17,6 W WH1+WHL I 6000 3013465 2 LED - 17,6 W GR3+WHL I 6000 3013475 2 LED - 17,6 W AN2+WHL I 6000 3013485 2 LED - 17,6 W WH1+WHL I 3000 3013495 2 LED - 17,6 W GR3+WHL I 3000 3013505 2 LED - 17,6 W AN2+WHL I 3000 3013515
DuplEX hp lED 15/45°Power LED/Power LED2 LED - 17,6 W WH1+WHL I 6000 3013525 2 LED - 17,6 W GR3+WHL I 6000 3013535 2 LED - 17,6 W AN2+WHL I 6000 3013545 2 LED - 17,6 W WH1+WHL I 3000 3013555 2 LED - 17,6 W GR3+WHL I 3000 3013565 2 LED - 17,6 W AN2+WHL I 3000 3013575
DuplEX hp lED nb 12° - 15/45°Power LED/Power LED2 LED - 17,6 W WH1+WHL I 6000 3013585 2 LED - 17,6 W GR3+WHL I 6000 3013595 2 LED - 17,6 W AN2+WHL I 6000 3013605 2 LED - 17,6 W WH1+WHL I 3000 3013615 2 LED - 17,6 W GR3+WHL I 3000 3013625 2 LED - 17,6 W AN2+WHL I 3000 3013635
33
F IK08 5J xx5
F IK08 5J xx5
F IK08 5J xx5
18 x 36 x 11,5 cm(master x 1)
44
ipgh
12°
12°
15°x45°
15°x45°
12°
15°x45°
n. 2 LED17,6 W
PACKAGE SIZE / VERPACKUNGSMAßE
luMINAIRE THAT REQuIRES A fIxINg KIT foR INSTAllATIoN
DIESE lEuCHTE BENöTIgT EINEN EINBAuToPf ZuR INSTAllATIoN
CEMENT ZEMENT
DRAINING GRAVELDRÄNAGEKIES
DrainaGE rEquirEDDränaGE
notWEnDiG
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Begehbare Boden- oder Wandeinbauleuchte, bestehend aus:¬ Gehäuse aus Technopolymer¬ Ring aus Aluminium¬ Profil aus stranggepresstem, eloxiertem
Aluminium für eine korrekte Streuung der LED-Lichtquelle
¬ Diffusor aus Technopolymer¬ Dichtungen aus EPDM¬ Modelle mit weißen LED 3000 K und 6000 K¬ Äußere Schrauben aus Edelstahl
In-ground traffic proof or in-wall fixture, consist-ing of:¬ Technopolymer body¬ Aluminium ring¬ Anodised extruded aluminium profile for cor-
rect dissipation of the LED light source¬ Technopolymer diffuser¬ EPDM gaskets¬ Versions with white 3000 K and 6000 K LEDs¬ Stainless steel fastening screws
aXEnt lED hp 6 lEDPower LED/Power LED6 LED - 13,5 W GR4+WHL I 3000 300239 6 LED - 13,5 W GR4+WHL I 6000 300240
34
n. 6 LED13,5 W
600
97
90
37 x 65 x 36 cm(master x 6)
IP 67
class I
IK09 10J xx7
C
F
aXEnt lEDdesign R. Fiorato - F. Pagliarini
200
Anti-glare grill¬ Black technopolymer
Adjustable louvre¬ Anodised aluminium¬ Adjustable tilt
Blendschutzgitter¬ Aus schwarzem Technopolymer
verstellbares gitter¬ eloxiertes Aluminium¬ verstellbare Neigung
Recessed fixing kit Axent/Einbautopf Axent 710107 Filter/Filter RD1 700094 Filter/Filter YL1 700095 Filter/Filter GN1 700097 Filter/Filter BL1 700096 Anti-glare cage/Blendschutzgitter BK1 700092 Adjustable grid/orientierbares Raster SS1 700093
ACCESSoRIES
ZuBEHöR
CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
GR4+WHLgrey anodized+white Ledgrau mattier+weiSS Led
35
605
578
20
123
96
68
700092
700093
700097700096
700094700095
710107
luMINAIRE THAT REQuIRES A fIxINg KIT foR INSTAllATIoN
DIESE lEuCHTE BENöTIgT EINEN EINBAuToPf ZuR INSTAllATIoN
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
inSERt 1 hpPower LED/Power LED3 LED - 3,3 W IV1+WHL I 3000 3027315 3 LED - 3,3 W BK1+WHL I 3000 3027335 3 LED - 3,3 W GR2+WHL I 3000 3027325 3 LED - 3,3 W IV1+WHL I 6000 3027345 3 LED - 3,3 W BK1+WHL I 6000 3027365 3 LED - 3,3 W GR2+WHL I 6000 3027355
inSERt 2 hpPower LED/Power LED4 LED - 4,4 W IV1+WHL I 3000 3027375 4 LED - 4,4 W BK1+WHL I 3000 3027395 4 LED - 4,4 W GR2+WHL I 3000 3027385 4 LED - 4,4 W IV1+WHL I 6000 3027405 4 LED - 4,4 W BK1+WHL I 6000 3027425 4 LED - 4,4 W GR2+WHL I 6000 3027415
Series of post and wall recessed luminaire for indoor and outdoor lighting, comprising:¬ Die-cast corrosion resistant aluminium body
and ring with vibratory finish¬ Pressed transparent glass diffuser with internal
pattern¬ HP versions complete whith 3 LED 1,1 W
(INSERT 1) or 4 LED 1,1 W, 3000K or 6000K and 350 mA driver.
¬ EPDM gasket¬ Stainless steel locking screws¬ Recessed fixing box in techno-polymer for a
proper installation of the luminaire needed. To be ordered separately
Einbauleuchte zum Einbau in Massivwände für Innen- und Außenbereiche, zur allgemeinen Beleuchtung, bestehend aus:¬ Gehäuse und Ring aus besonders korrosions-
beständigem Aluminiumdruckguss¬ Diffusor aus gepresstem, transparentem,
innen behandeltem Glas¬ HP Ausführung mit 3 x 1,1W LEDs (Einsatz 1) ,
4 x 1,1W LEDs (Einsatz 2) , mit 3000K oder 6000K erhältlich. inkl. 350mA Konverter.
¬ EPDM-Dichtung¬ Äußere Schrauben aus Edelstahl¬ Zur korrekten Montage ist ein Einbaugehäuse
erforderlich. Einbaugehäuse nicht im Liefer-umfang enthalten
36
F IK08 5J xx5
F IK08 5J xx5
n. 3 LED3,3 W
350 ma
n. 4 LED4,4 W
350 ma
256
88 79
85 7
IP 55
class I
IK08 5J xx5
C
F
115
316
106
120 7
inSERt hpdesign Roberto Fiorato
PACKAGE SIZE / VERPACKUNGSMAßE
Aluminium post, comprising:¬ Painted extruded aluminium post¬ Painted die-cast aluminium
flange for anchoring to the ground
Recessed fixing kit¬ Recessed fixing kit made of
technopolymer to be cemented into wall prior to installation of the luminaire
Mast aus Aluminium, bestehend aus:
¬ Mast aus lackiertem, eloxiertem Aluminium
¬ Flansch für die Bodenbefesti-gung aus lackiertem Aluminium-druckguss
Einbautopf¬ Einbautopf aus selbstverlöschen-
dem Technopolymer für den Wandeinbau vor der Installation der Leuchte
ACCESSoRIES ZuBEHöR Recessed fixing kit INSERT 1/Einbautopf INSERT 1 008120 Recessed fixing kit INSERT 2/Einbautopf INSERT 2 008122 Post INSERT 2/Mast INSERT 2 WH1 008123 Post INSERT 2/Mast INSERT 2 BK1 008124 Fixing rod/Einbetonierschraube 008981
CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
WH1+WHLivory white+white Led
eLfenbein+weiSS Led
bk1+WHLbLack+white Led
Schwarz+weiSS Led
GR2+WHLgLoSS metaLLic grey+white Led
grau metaLLic, poLiert +weiSS Led
z see GENERAL CATALOGUE for other fixtures
z Weitere Leuchten finden Sie im HAUPTKATALOG
37
13 x 30 x 34 cm(master x 3)
204
154
115
827
008120
008122
10
194
008981
294
252
196
15
343
312254
125
83
88
21
15
141
110
122 23
122
88
pmb
WH1+WHLwhite+white Led weiSS+weiSS Led
Rb1+WHLruSt brown+white Led roStfarbig+weiSS Led
PACKAGE SIZE / VERPACKUNGSMAßE
luMINAIRE THAT REQuIRES A fIxINg KIT foR INSTAllATIoN
DIESE lEuCHTE BENöTIgT EINEN EINBAuToPf ZuR INSTAllATIoN
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
Series of round and square post and wall recessed luminaire, for indoor and outdoor lighting, comprising:¬ Die-cast painted aluminium
body, ring and trims ¬ Diffuser manufactured from tech-
nopolymer, internally matt¬ HP version complete whith 1 LED
1,1 W, 3000 K or 6000 K and 350 mA driver
¬ Stainless steel locking screws¬ Polymer gasket¬ Casing manufactured from
technopolymer for wall recessing prior to installation of the lumi-naire. Order separately
¬ Through wiring connection pos-sible max ø 9 mm
¬ Guard, Grill, Up&down Shield, Visa mini, and Cover to order separately
Runde und quadratische Einbau-leuchten für Innen- und Außenbe-reiche, zur allgemeinen Beleuch-tung, bestehend aus:¬ Gehäuse aus lackiertem Alumini-
umdruckguss¬ Diffusor aus Technopolymer,
innen mattiert¬ HP Ausführung mit 1 x 1,1 W LED
mit 3000 K oder 6000 K erhält-lich. Inkl. 350 mA Konverter.
¬ Polymerdichtung¬ Äußere Schrauben aus Edelstahl¬ Zur korrekten Montage ist ein
Einbaugehäuse erforderlich. Einbaugehäuse nicht im Liefer-umfang enthalten.
¬ Vorbereitung für Durchgangsver-drahtung, für Netzanschlußkabel max. ø 9 mm
¬ Als Zubehör sind separate Licht-blenden erhältlich
GRaDuS RounD hpPower LED/Power LED1 LED - 1,1 W WH1+WHL I 6000 3026435 1 LED - 1,1 W GR3+WHL I 6000 3026445 1 LED - 1,1 W AN3+WHL I 6000 3026455 1 LED - 1,1 W RB1+WHL I 6000 3026465 1 LED - 1,1 W WH1+WHL I 3000 3026395 1 LED - 1,1 W GR3+WHL I 3000 3026405 1 LED - 1,1 W AN3+WHL I 3000 3026415 1 LED - 1,1 W RB1+WHL I 3000 3026425
GRaDuS SQuaRE hpPower LED/Power LED1 LED - 1,1 W WH1+WHL I 6000 3026535 1 LED - 1,1 W GR3+WHL I 6000 3026545 1 LED - 1,1 W AN3+WHL I 6000 3026555 1 LED - 1,1 W RB1+WHL I 6000 3026565 1 LED - 1,1 W WH1+WHL I 3000 3026495 1 LED - 1,1 W GR3+WHL I 3000 3026505 1 LED - 1,1 W AN3+WHL I 3000 3026515 1 LED - 1,1 W RB1+WHL I 3000 3026525
38
GRaDuS SQuaRE/RounD hpdesign R. Fiorato - F. Pagliarini
F IK10 20J xx9
138
15
75
138
ik10 20J
IP 66
class I
IK10 20J xx9
C
F
y
mb
F IK10 20J xx9
ø 140
15
75
ik10 20J
25 x 30 x 60 cm(master x 6)
n. 1 LED1,1 W
350 ma
n. 1 LED1,1 W
350 ma
recessed fixing kit graduS Square/einbautopf graduS Square 310250 recessed fixing kit graduS round/einbautopf graduS round 310251
CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
z see GENERAL CATALOGUE for other accessories
z Weiteres Zubehör finden Sie im HAUPTKATALOG
39
310250
120
128
128 87
31025188
ø 13
2
ø 12
7
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
PACKAGE SIZE / VERPACKUNGSMAßE
luMINAIRE THAT REQuIRES A fIxINg KIT foR INSTAllATIoN
DIESE lEuCHTE BENöTIgT EINEN EINBAuToPf ZuR INSTAllATIoN
ss1+WHLSiLver+white Led SiLber+weiSS Led
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Wall recessed luminaire, for indoor and outdoor lighting, comprising:¬ Die-cast painted aluminium body¬ Stainless steel ring¬ Diffuser manufactured from technopolymer,
internally matt¬ Polymer gasket¬ HP version complete whith 3 LED 1,1 W,
3000 K or 6000 K and 350 mA driver¬ Casing manufactured from technopolymer
for wall recessing prior to installation of the luminaire. Order separately
¬ Through wiring connection possible max Ø 9 mm
Wand- Einbauleuchten für Innen- und Außenbe-reiche, zur allgemeinen Beleuchtung, bestehend aus:¬ Gehäuse aus lackiertem Aluminiumdruckguss¬ Ring aus Edelstahl¬ Diffusor aus Technopolymer, innen mattiert¬ Polymerdichtung¬ HP Ausführung mit 1 x 1,1 W LED mit 3000 K
und 6000 K erhältlich. Inkl. 350 mA Konverter.¬ Zur korrekten Montage ist ein Einbaugehäuse
erforderlich. Einbaugehäuse nicht im Liefer-umfang enthalten.
¬ Vorbereitung für Durchgangsverdrahtung, für Netzanschlußkabel max. Ø 9 mm
GRaDuS StEEl SQuaRE hpPower LED/Power LED1 LED - 1,1 W SS1+WHL I 3000 3026575 1 LED - 1,1 W SS1+WHL I 6000 3026585
GRaDuS StEEl RounD hpPower LED/Power LED1 LED - 1,1 W SS1+WHL I 3000 3026475 1 LED - 1,1 W SS1+WHL I 6000 3026485
40
GRaDuS StEEl hpdesign R. Fiorato - F. Pagliarini
IP 66
class I
IK10 20J xx9
C
F
y
mb
138
15
75
138
ø 140
15
75
GRADUS STEEL SQUARE25 x 30 x 60 cm(master x 6)
GRADUS STEEL ROUND25 x 30 x 60 cm(master x 6)
F IK10 20J xx9
F IK10 20J xx9
n. 1 LED1,1 W
350 ma
n. 1 LED1,1 W
350 ma
Recessed fixing kit Gradus Square/Einbautopf Gradus Square 310250 Recessed fixing kit Gradus Round/Einbautopf Gradus Round 310251
CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
41
310250
120
128
128 87
31025188
ø 13
2
ø 12
7
PACKAGE SIZE / VERPACKUNGSMAßE
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
luMINAIRE THAT REQuIRES A fIxINg KIT foR INSTAllATIoN
DIESE lEuCHTE BENöTIgT EINEN EINBAuToPf ZuR INSTAllATIoN
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Wall recessed luminaire, for indoor and outdoor lighting, comprising:¬ Die-cast painted aluminium body, ring and
trims¬ Diffuser manufactured from technopolymer,
internally matt¬ HP version complete whith 3 LED 1,1 W,
3000 K or 6000 K and 350 mA driver¬ EPDM gasket¬ Stainless steel locking screws¬ Casing manufactured from technopolymer
for wall recessing prior to installation of the luminaire. Order separately
¬ Through wiring connection possible max ø 9 mm
¬ Guard, Louvre, Shield and Mini ring to order separately
Einbauleuchte zum Einbau in Massivwände für Innen- und Außenbereiche, zur allgemeinen Beleuchtung, bestehend aus:¬ Gehäuse aus lackiertem Aluminiumdruckguss¬ Diffusor aus Technopolymer, innen mattiert¬ HP Ausführung mit 3 x 1,1 W LEDs mit 3000 K
und 6000 K erhältlich. Inkl. 350 mA Konverter.¬ EPDM-Dichtung¬ Äußere Schrauben aus Edelstahl¬ Zur korrekten Montage ist ein Einbaugehäuse
erforderlich. Einbaugehäuse nicht im Liefer-umfang enthalten.
¬ Vorbereitung für Durchgangsverdrahtung, für Netzanschlußkabel max. ø 9 mm
¬ Als Zubehör sind separate Lichtblenden erhältlich
GRaDuS 7 lEDLED - voltage 220/240 V 50/60 hz / stromversorgungs-LED 220/240 V 50/60 hz7 LED - 3 W WH1+WHL I 3000 3026365 7 LED - 3 W GR3+WHL I 3000 3026375 7 LED - 3 W AN3+WHL I 3000 3026385 7 LED - 3 W WH1+WHL I 6000 700328 7 LED - 3 W GR3+WHL I 6000 700329 7 LED - 3 W AN3+WHL I 6000 700330
GRaDuS hpPower LED/Power LED3 LED - 3,3 W WH1+WHL I 3000 3025075 3 LED - 3,3 W GR3+WHL I 3000 3025085 3 LED - 3,3 W AN3+WHL I 3000 3025095 3 LED - 3,3 W WH1+WHL I 6000 3025105 3 LED - 3,3 W GR3+WHL I 6000 3025115 3 LED - 3,3 W AN3+WHL I 6000 3025125
42
GRaDuS lED/hpdesign R. Fiorato - F. Pagliarini
IP 66
class I
IK10 20J xx9
C
F
y
mb
28 x 32 x 28 cm(master x 6)
F IK10 20J xx9
F IK10 20J xx9
16
67
82
86
273
16
67
82
86
273
n. 7 LED3 W
n. 3 LED3,3 W
Louvre/Blendschutzgitter WH1 700161 Louvre/Blendschutzgitter GR2 700162 Louvre/Blendschutzgitter AN2 700163 Guard/Gitter WH1 700164 Guard/Gitter GR2 700165 Guard/Gitter AN2 700166 Shield/Schirm WH1 700167 Shield/Schirm GR2 700168 Shield/Schirm AN2 700169 Mini ring/Miniring WH1 700233 Mini ring/Miniring GR2 700234 Mini ring/Miniring AN2 700235 Recessed fixing kit Gradus/Einbautopf Gradus 310249
ACCESSoRIES / ZuBEHöR CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
43
76
257
100
20 20
700161700162700163
700164700165700166
700167700168700169
700233700234700235
310249
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Post mounted landscape luminaires, comprising:¬ Extruded aluminium post¬ Die-cast painted aluminium body and ring¬ Diffuser manufactured from technopolymer,
internally matt¬ Stainless steel locking screws¬ Polymer gasket¬ Through wiring connection possible max Ø
9 mm¬ Guard, Grill, Up&down Shield, Visa mini, and
Cover to order separately
Leuchte zur Pollermontage für Außenbereiche, zur allgemeinen Beleuchtung, bestehend aus:¬ Pollermast aus eloxiertem, lackiertem Alumi-
nium¬ Gehäuse aus lackiertem Aluminiumdruckguss¬ Diffusor aus Technopolymer, innen mattiert¬ Polymerdichtung¬ Äußere Schrauben aus Edelstahl¬ Vorbereitung für Durchgangsverdrahtung, für
Netzanschlußkabel max. Ø 9 mm¬ Als Zubehör sind separate Lichtblenden
erhältlich
GRaDuS poSt hpPower LED/Power LED1 LED - 1,1 W WH1+WHL I 3000 3013385 1 LED - 1,1 W GR3+WHL I 3000 3013395 1 LED - 1,1 W AN3+WHL I 3000 3013405 1 LED - 1,1 W RB1+WHL I 3000 3013415 1 LED - 1,1 W WH1+WHL I 6000 3013425 1 LED - 1,1 W GR3+WHL I 6000 3013435 1 LED - 1,1 W AN3+WHL I 6000 3013445 1 LED - 1,1 W RB1+WHL I 6000 3013455
44
GRaDuS poStdesign R. Fiorato - F. Pagliarini
IP 66
class I
IK10 20J xx9
C
y
13896
297
ik10 20J
F IK10 20J xx9
n. 1 LED1,1 W
WH1+WHLwhite+white Led weiSS+weiSS Led
Rb1+WHLruSt brown+white Led roStfarbig+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE
Cover/Cover WH1 710082 Cover/Cover GR3 710083 Cover/Cover AN3 710084 Cover/Cover RB1 710085 Guard/Gitter WH1 710074 Guard/Gitter GR3 710075 Guard/Gitter AN3 710076 Guard/Gitter RB1 710077 Grill/Grill WH1 710078 Grill/Grill GR3 710079 Grill/Grill AN3 710080 Grill/Grill RB1 710081 Up/down shield/Up/down Schirm WH1 710098 Up/down shield/Up/down Schirm GR3 710099 Up/down shield/Up/down Schirm AN3 710100 Up/down shield/Up/down Schirm RB1 710101 Visa mini/Visa mini WH1 710086 Visa mini/Visa mini GR3 710087 Visa mini/Visa mini AN3 710088 Visa mini/Visa mini RB1 710089 Visa/Visa WH1 710090 Visa/Visa GR3 710091 Visa/Visa AN3 710092 Visa/Visa RB1 710093
ACCESSoRIES / ZuBEHöR CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
45
pb
11,8 x 16,8 x 34,1 cm(master x 1)
116
6
24
710090710091710092710093
710086710087710088710089
710074710075710076710077
710078710079710080710081
710082710083710084710085
710098710099710100710101
DISTANCE BETWEEN FIXING HOLES / BOHRLOCHABSTANDPACKAGE SIZE / VERPACKUNGSMAßE
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Series of wall and post mounted luminaires for indoor and outdoor lighting, in two sizes comprising:¬ Die-cast painted aluminium base and screens ¬ The Split model sheds light from a front open
screen ¬ Pressed glass diffuser, internally matt, secured
with the trim ¬ Foam polymer gasket ¬ Aluminium reflector¬ Stainless steel locking screws¬ Models with 6000 K and 3000 K white LED and
350mA power supply unit ¬ PIR models have a motion sensor fitted into
the ring, suitable for resistive and inductive load
¬ Controlling the switching off time from 6 seconds to 20 minutes
¬ Tripping threshold from 5 lux to daylight level ¬ Vertical detection angle equal to 360°, hori-
zontal angle 100°
Leuchtenserie für Wand - und Pollermontage für Innen- und Außenbereiche, in zwei Größen, bestehend aus:¬ Sockelelement und Blenden aus lackiertem
Aluminiumdruckguss¬ Ausführung Split mit vorderseitig geöffneter
Blende für den Lichtaustritt¬ Diffusor aus Pressglas, innen mattiert¬ Dichtung aus Polymerschaumstoff¬ Parabolreflektor aus Aluminium¬ Äußere Schrauben aus Edelstahl¬ Ausführungen mit weißer LED 6000 K und
3000 K mit 350 mA Konverter ¬ Die PIR-Ausführungen sind mit einem in der
Dekorabdeckung eingebauten Bewegungs-sensor ausgestattet. Für ohmsche- und induktive Lasten geeignet.
¬ Ausschaltzeit einstellbar zwischen 6 Sekunden und 20 Minuten
¬ einstellbare Auslöseschwelle von 5 Lux bis Tageslicht
¬ Erfassungswinkel in der Vertikale 360° und in der Horizontale 100°
paCk QPower LED/Power LED3 LED - 3 W WH1+WHL I 6000 300800 3 LED - 3 W GR3+WHL I 6000 300801 3 LED - 3 W AN3+WHL I 6000 300802 3 LED - 3 W WH1+WHL I 3000 301911 3 LED - 3 W GR3+WHL I 3000 301912 3 LED - 3 W AN3+WHL I 3000 301913
paCk Q SplitPower LED/Power LED3 LED - 3 W WH1+WHL I 6000 301920 3 LED - 3 W GR3+WHL I 6000 301921 3 LED - 3 W AN3+WHL I 6000 301922 3 LED - 3 W WH1+WHL I 3000 301923 3 LED - 3 W GR3+WHL I 3000 301924 3 LED - 3 W AN3+WHL I 3000 301925
46
IP 54
class I
IK06 1J xx3
C
F
B
paCk Q lEDdesign R. Fiorato - F. Pagliarini
PACK Q20 x 30 x 55 cm(master x 6)
PACK Q PIR25 x 30 x 55 cm(master x 6)
134
33
3311
ø 5
134
33
3311
ø 5
F IK06 1J xx3
151 120
151
151 120
151
F IK06 1J xx3
n. 3 LED3 W
n. 3 LED3 W
infrared motion SenSorpaSSiv infrarot
bewegungSmeLder
infrared motion SenSorpaSSiv infrarot
bewegungSmeLder
WH1+WHLwhite+white Led weiSS+weiSS Led
GR3+WHLmat metaLLic grey+white Led
grau metaLLic, mat +weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
z see GENERAL CATALOGUE for poles
z Weitere Poller finden Sie im HAUPTKATALOG
paCk Q piRPower LED/Power LED3 LED - 3 W WH1+WHL I 6000 300806 3 LED - 3 W GR3+WHL I 6000 300807 3 LED - 3 W AN3+WHL I 6000 300808 3 LED - 3 W WH1+WHL I 3000 301914 3 LED - 3 W GR3+WHL I 3000 301915 3 LED - 3 W AN3+WHL I 3000 301916
paCk Q Split piRPower LED/Power LED3 LED - 3 W WH1+WHL I 6000 301929 3 LED - 3 W GR3+WHL I 6000 301930 3 LED - 3 W AN3+WHL I 6000 301931 3 LED - 3 W WH1+WHL I 3000 301932 3 LED - 3 W GR3+WHL I 3000 301933 3 LED - 3 W AN3+WHL I 3000 301934
47
ipb
151 120
210
151 120
210
F IK06 1J xx3
F IK06 1J xx3
n. 3 LED3 W
n. 3 LED3 W
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
A heat sink has been positioned inside the fixture to improve the efficiency of the LEDs.
Im Inneren der Leuchte wurde ein Wärmeableiter für die Verbesserung der Leistungsfähigkeit der LED eingesetzt.
Stilo+ mini h600Power LED/Power LED4 LED - 9,6 W WH1+WHL I 3000 302262 4 LED - 9,6 W GR2+WHL I 3000 302264 4 LED - 9,6 W AN3+WHL I 3000 302263 4 LED - 9,6 W WH1+WHL I 6000 302265 4 LED - 9,6 W GR2+WHL I 6000 302267 4 LED - 9,6 W AN3+WHL I 6000 302266
Series of bracket and post mounted landscape luminaires comprising:¬ Die-cast painted aluminium glass holder¬ Glass diffuser¬ Techno-polymer unheaded screw for quick
locking of the diffuser to the body¬ Cable compartment in die-cast aluminium¬ Foam plymer gasket¬ Extruded painted aluminium post (H.500) with
base plate¬ To compose custom versions, STILO+ ENGINES
(comprising a cabled structure and a diffuser) can be combined with special posts (H. 500 and H.1000)
¬ Options: screens and rasters in different hights and configurations
Gartenleuchten für Konsolen- und Pollermonta-ge bestehend aus:¬ Glashalterung aus lackiertem Aluminiumdruck-
guss¬ Diffusor aus Glas¬ Technopolymerring für die schnelle Befesti-
gung des Diffusors bei der Montage und beim Lampenwechsel
¬ Kabelanschlußgehäuse aus Aluminiumdruck-guss
¬ Dichtung aus Polymerschaumstoff¬ Mast mit Flansch aus lackiertem, eloxiertem
Aluminium, h 500¬ Die Ausführungen STILO+ ENGINE bestehen
aus einer elektrischen Anschlußeinheit mit Diffusor aus Glas, der auf einen speziellen Mast von h 500 oder h 1000 montiert werden muss.
¬ Erhältliches Zubehör: Schutzschirme (T), Lichtschutzgitter (R) und Blende
48
IP 44
class I
IK04 0,5J xx3
C
F
Stilo+design Roberto Fiorato
F IK04 0,5J xx3
7153
0 601
ø 95
ø 104
STILO+ MINI H60011 x 11 x 80 cm(master x 1)
n. 4 LED9,6 W
STILO+ MINI ENGINE 11,5 x 11,5 x 80 cm(master x 1)
LAmPhoLDEr CoLour CLASS CoS ϕ CoDE NoTES
FASSuNG W ILCoS FArbE KLASSE KELVIN ≥ 0,9 EEI bESTELLNr. bEmErKNG. Euro
¬ Extruded aluminium posts and die-cast aluminium base finished painted.
¬ Masten aus eloxiertem Alumi-nium, Sockel aus lackiertem Aluminiumdruckguss
ACCESSoRIES
ZuBEHöR
STILO+ Post H500/STILO+ Mast H500 WH1 315017 STILO+ Post H500/STILO+ Mast H500 GR2 315019 STILO+ Post H500/STILO+ Mast H500 AN3 315018 STILO+ Post H1000/STILO+ Mast H1000 WH1 315020 STILO+ Post H1000/STILO+ Mast H1000 GR2 315022 STILO+ Post H1000/STILO+ Mast H1000 AN3 315021
CoLour CoDE DESCrIPTIoN / bESChrEIbuNG FArbE bESTELLNr. Euro
WH1+WHLwhite+white Led weiSS+weiSS Led
AN3+WHLmat met. anthracite
+white Led anthrazit met. matt
+weiSS Led
GR2+WHLgLoSS metaLLic grey+white Led
grau metaLLic, poLiert +weiSS Led
z see GENERAL CATALOGUE for other fixtures and accessories
z Weitere Leuchten und Zubehör finden Sie im HAUPTKATALOG
Stilo+ mini EnGinEPower LED/Power LED4 LED - 9,6 W WH1+WHL I 3000 302268 4 LED - 9,6 W GR2+WHL I 3000 302270 4 LED - 9,6 W AN3+WHL I 3000 302269 4 LED - 9,6 W WH1+WHL I 6000 302271 4 LED - 9,6 W GR2+WHL I 6000 302273 4 LED - 9,6 W AN3+WHL I 6000 302272
49
ipb
F IK04 0,5J xx3
ø 95
ø 104
71
n. 4 LED9,6 W
ø 95
530
ø 95
1030
315017315018 315019
315020315021 315022
CoDE PAGEbESTELLNr. SEITE
CoDE PAGEbESTELLNr. SEITE
CoDE PAGEbESTELLNr. SEITE
CoDE PAGEbESTELLNr. SEITE
CoDE PAGEbESTELLNr. SEITE
CoDE PAGEbESTELLNr. SEITE
CoDE inDEX / inDEX
50
008120 37
008122 37
008123 37
008124 37
008981 37
300239 34
300240 34
300800 46
300801 46
300802 46
300806 47
300807 47
300808 47
301376 25
301376 25
301378 25
301378 25
301380 25
301380 25
301381 20
301382 20
301383 20
301384 20
301385 20
301386 20
301387 18
301388 18
301389 18
301390 18
301391 18
301394 22
301395 22
301396 22
301397 22
301398 22
301399 22
301400 18
301401 18
301402 18
301403 23
301404 23
301405 23
301406 23
301407 23
310348 31
310349 31
310350 31
315017 49
315018 49
315019 49
315020 49
315021 49
315022 49
700092 35
700093 35
700094 35
700095 35
700096 35
700097 35
700161 43
700162 43
700163 43
700164 43
700165 43
700166 43
700167 43
700168 43
700169 43
700233 43
700234 43
700235 43
700328 42
700329 42
700330 42
710074 45
710075 45
710076 45
710077 45
710078 45
710079 45
710080 45
710081 45
710082 45
710083 45
710084 45
710085 45
710086 45
710087 45
301408 23
301409 26
301410 26
301411 26
301412 26
301413 28
301414 28
301415 28
301416 28
301418 16
301419 16
301421 16
301422 16
301423 16
301424 17
301425 17
301426 17
301427 17
301428 17
301429 23
301430 23
301431 23
301432 23
301433 23
301434 23
301555 17
301556 17
301557 17
301558 17
301559 17
301611 19
301612 19
301613 19
301614 19
301615 19
301616 19
301617 19
301618 19
301619 22
301620 22
301621 22
301622 22
301623 22
301624 22
710088 45
710089 45
710090 45
710091 45
710092 45
710093 45
710098 45
710099 45
710100 45
710101 45
710107 35
3013385 44
3013395 44
3013405 44
3013415 44
3013425 44
3013435 44
3013445 44
3013455 44
3013465 33
3013475 33
3013485 33
3013495 33
3013505 33
3013515 33
3013525 33
3013535 33
3013545 33
3013555 33
3013565 33
3013575 33
3013585 33
3013595 33
3013605 33
3013615 33
3013625 33
3013635 33
3013645 32
3013655 32
3013665 32
3013675 32
3013685 32
3013695 32
3013705 32
301625 22
301626 22
301627 22
301628 22
301629 22
301630 22
301631 23
301632 23
301633 23
301634 23
301635 23
301636 23
301637 23
301638 23
301639 23
301640 23
301641 23
301642 23
301643 21
301644 21
301645 21
301646 21
301647 21
301648 21
301649 21
301650 21
301651 21
301652 21
301653 21
301654 21
301655 26
301656 26
301657 26
301658 26
301659 26
301660 26
301661 26
301662 26
301663 29
301664 29
301665 29
301666 29
301667 29
301668 29
301669 29
301670 29
301911 46
301912 46
301913 46
301914 47
301915 47
301916 47
301920 46
301921 46
301922 46
301923 46
301924 46
301925 46
301929 47
301930 47
301931 47
301932 47
301933 47
301934 47
302262 48
302263 48
302264 48
302265 48
302266 48
302267 48
302268 49
302269 49
302270 49
302271 49
302272 49
302273 49
310249 43
310250 39
310250 41
310251 39
310251 41
310341 31
310342 31
310343 31
310344 31
310345 31
310346 31
310347 31
CoDE PAGEbESTELLNr. SEITE
CoDE PAGEbESTELLNr. SEITE
51
3013715 32
3013725 32
3013735 32
3013745 32
3013755 32
3015135 30
3015145 30
3015155 30
3015165 30
3015175 30
3015185 30
3025075 42
3025085 42
3025095 42
3025105 42
3025115 42
3025125 42
3026365 42
3026375 42
3026385 42
3026395 38
3026405 38
3026415 38
3026425 38
3026435 38
3026445 38
3026455 38
3026465 38
3026475 40
3026485 40
3026495 38
3026505 38
3026515 38
3026525 38
3026535 38
3026545 38
3026555 38
3026565 38
3026575 40
3026585 40
3027315 36
3027325 36
3027335 36
3027345 36
3027355 36
3027365 36
3027375 36
3027385 36
3027395 36
3027405 36
3027415 36
3027425 36
SpaRE paRtS / ERSatztEilE
CoDE DESCrIPTIoN CoLourbESTELLNr. bESChrEIbuNG FArbE Euro
013276 Aura 28 plat Glass/Aura 28 Plat Glas 013278 Aura 28 Glass/Aura 28 Glas 013280 Aura 38 plat Glass/Aura 38 Plat Glas 013282 Aura 38 Glass/Aura 38 Glas 013251 Chip ovale 25 Glass/Chip Ovale 25 Glas 013253 Chip ovale 30-chip safe-kai-griffe Glass/ Chip Ovale 30 - Chip Safe - Kai - Griffe Glas 013255 Chip tondo 25 Glass/Chip Tondo 25 Glas 013257 Chip tondo 30 Glass/Chip Tondo 30 Glas 360036 Eko 21 Glass/Eko 21 Glas 360045 Eko 26 Glass/Eko 26 Glas 013026 Insert 1 Glass/Insert 1 Glas 013027 Insert 2 Glass/Insert 2 Glas 013157 Magiclick 18/S Eko 19 /Magiclick 18/S Eko 19 013038 Nikko-Klassica-Klassica detek Glass/ Nikko - Klassica - Klassica Detek Glas 310294 Stilo+ maxi Glass/Stilo+ maxi Glas 310293 Stilo+ midi Glass/Stilo+ midi Glas 310292 Stilo+ mini Glass/Stilo+ mini Glas
52
53
NOTES / NOTIZEN
54
55
PRISMA® is a brand of / ist ein Markenname der Firma PERfoRMANCE IN lIgHTINg S.p.A.
PERfoRMANCE IN lIgHTINg S.p.A.9/11, viale del Lavoro 37030 Colognola ai Colli (VR) - Italytel +39.045.61.59.211 fax export +39.045.61.59.393www.performanceinlighting.com
SPITTlER lichttechnik gmbHStapelner Str. 1+3 38644 Goslar / Germany tel. +49(0)5321.3777-0 fax +49(0)5321.3777-99eMail: info@spittler.dewww.spittler.de
Recommended