View
2
Download
0
Category
Preview:
Citation preview
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
POWERFUL COMPONENTS MAKE A DIFFERENCE
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.comMAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Valves
Powerful components make a differenceMAKEEN Power delivers components through our sister company, KC ProSupply, and that gives you a wide range of benefits:
• One place to go for any type of equipment for power plants
• Huge stock and collected shipments• Quick delivery• Experienced support team • Competitive pricing
This product catalogue will give you an overview of MAKEEN Power's various types of high precision valves. Our range of valves includes both needle and gauge types as well as a 2 valve manifold. Common to all our valves are the good materials and the many different sizes.
The valves are made of stainless steel (SS) or carbon steel (CS). We always hold a variety of standard sizes in stock, and we can upon request also assist you with other types, sizes and materials - all you need to do is let us know.
Are you looking for instrumentation fittings or pressure gauge accessories? Then turn to MAKEEN Power. In addition to our valves, we can also supply you with these components, and we are happy to answer any request.
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Testing: Every valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
Certification: Every valves are supplied with the certificates for the wetted parts and the pressure test.
General format is EN 10204 3.1.
Marking: Every needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Valves Quick reference chart
Assembly code for standard service
Pressure rating (PSI) Nominal pipe size (inch)
Stainless steel 316 (SS 316)
Carbon steel (CS) 1/4" 3/8" 1/2" 3/4" 1"
PSI Bar PSI Bar
6,000 413
6,000 413
6,000 413
6,000 413
10,000 689
10,000 689
6,000 413
6,000 413
6,000 413
6,000 413
6,000 413
6,000 413
6,000 413
6,000 413
6,000 413
6,000 413
• High quality and safety ensured by ISO 9001:2015 certificates
• Guaranteed free movement with PED/97/23/EC certificates
• Quality raw material meeting ASTM standards
• Easy identification with laser marking in accordance with MSS SP 25
• The sizes 1/4" and 1/2" are in stock , other sizes are available on request .
Female Male
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1
Dimensions• 1/4" (93 x 55 mm)• 0.36 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel SS 316• Carbon steel CS• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/4" NPT {FXF} 6000PSI
CS 1/4" NPT {FXF} 6000PSI
Part no. 137278
Part no. 137283
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1
Size• 1/2" (95 x 66 mm)• 0.46 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/2" NPT {FXF} 6000PSI
CS 1/2" NPT {FXF} 6000PSI
Part no. 137284
Part no. 1372835
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Size• 1/2" (111 x 67 mm)• 0.85 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
10,000 PSI / 689 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/2" NPT {FXF} 10000PSI
Part no. 137286
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Size• 1/2" (111 x 76 mm)• 0.88 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
10,000 PSI / 689 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
CS 1/2" NPT {MXF} 10000PSI
Part no. 137287
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Size• 1/4" (93 x 65 mm)• 0.45 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/4" NPT {MXF} 6000PSI
CS 1/4" NPT {MXF} 6000PSI
Part no. 137288
Part no. 137289
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Size• 1/2" (95 x 76 mm)• 0.56 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/2" NPT {MXF} 6000PSI
CS 1/2" NPT {MXF} 6000PSI
Part no. 137292
Part no. 137293
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Angle needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Size• 1/2" (115 x 50 mm)• 0.575 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/2" NPT {FXF} 6000PSI
Part no. 137294
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Angle needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Size• 1/2" (115 x 50 mm)• 0.575 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel • Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/2" NPT {MXF} 6000PSI
Part no. 137297
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Forged body gauge valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Size• 1/2" (104 x 117 mm)• 0.50 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
C.S G 1/2" {MXF} 6000PSI
Part no. 137298
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Needle valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Dimension• 1/2" (95 x 76 mm)• 0.40 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel • Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 1/2" OD 6000PSI
Part no. 137299
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
Forged body gauge valveIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure measurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Dimension• 1/2" (104 x 117 mm)• 0.50 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel 316• Carbon steel• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 G 1/2" {MXF} 6000PSI
Part no. 137300
MAKEEN PowerAlsvej 21 | DK-8940 Randers SV | Denmark | Tel +45 8740 3000 | power@makeenenergy.com | www.makeenenergy.com
2 valve manifoldIn-line or angle pattern
Application• Oil and gas petrochem • Chemicals
Different types of application• Isolation • Isolation and drain • Isolation and calibration• Differential pressure peasurement • Distribution
Standard• ISO 9001 : 2008 - PED 97/23/EC
Raw material standards• ASTM A 105, ASTM A 182 F 304, F 304 L,
F 316, F 316 L• ASTM A 351 • ASTM A 479-304, 304 L, 316, 316 L• ASTM A 312 • NACE M R 0175, Latest version
Manufacturing and testing standards• MSS-SP 99 for instrument valves • MSS-SP 110 for instrument ball valves • ASTM F1387 compression fittings
and threaded fittings• ASTM B 16.5 • ASTM B 16.34 • ANSI/ASME B 1.20.1TestingEvery needle valves are tested as per the relevant standards for hydraulic and pneumatic pressure.
CertificationEvery needle valves are supplied with the certificates for the wetted parts and the pressure test. General format is EN 10204 3.1.
MarkingEvery needle valves are supplied with laser marking done in accordance with MSS-SP-25.
Dimension• 1/2" (181 x 64 mm)• 1.00 kg• Other sizes on request
Seal• PTFE 2-piece cheron
stem packing • Other packings on request
Material• Stainless steel• Carbon steel• Other materials on request
Maximum operating pressure
6,000 PSI / 413 Bar
Operating temperature range
-54°C to 232°C
End type• NPT• Available in: BSP, BSPT,
OD Tube
SS 316 G 1/2" NPT {F} 6000PSI
Part no. 137301
Rev
. 0
2 /
MA
R 2
019
MAKEEN Power is part of MAKEEN Energy – Responsible energy solutions for people and planet
Leading power all the way
Alsvej 21DK-8940 Randers SVDenmark
Tel +45 8740 3000Fax +45 8740 3010power@makeenenergy.com
www.makeenpower.com
MAKEEN Power supplies 360 degree turnkey solutions for sustainable and flexible power plants. Our history and experience can be traced back to 1947, and we therefore know every corner, nut and engine in the power industry. As a result, we are able to create tailor-made power solutions with a greener profile that matches every customer's specific needs and expectations - both when it comes to complete solutions and single components.
Recommended