Post & base system · 2018. 4. 3. · WA16 8XJ DATA SHEET Post & base system Product code:...

SKIPPER TM LIMITED 12 Wolfe Close, Parkgate Industrial Estate, Knutsford, Cheshire. WA16 8XJ

DATA SHEET

Post & base system Product code: Post01 (post), Post02 (base)

The Skipper post and base system is the perfect complement to the Skipper unit.

Its sleek, professional design looks sublime in any environment, both indoors and

outdoors. Sold as a two-part system for improved transport and storage, the base can

simply be filled with water or sand for improved strength and stability, then the post is

twist-locked into position. The Skipper unit or post & base cap attach to the top of the

post with a secure, snap fit.

Product Specifications (post)

Key

selli

ng

po

ints

• Made specifically for the

Skipper unit and Skipper waste

& safety management range

• An attractive alternative to

using standard traffic cones

• Perfect for use in indoor or

outdoor environments

Q. Can I use a combination of cones and posts?

A. The Skipper post is 1m tall. It’s designed to be used with other Skipper posts,

but can also be used with traffic cones of the same height.

Q. How heavy is the base once it’s filled with water or sand?

A. If using water, the base weighs approximately 12.3kg (27.1lbs) when filled to

the maximum level.

Ove

rvie

wPr

od

uct

FA

Qs

Key

feat

ure

s

• Each post comes with 2x

reflective, high visibility strips

• Pour water or sand into the

base for extra stability

• Holds the Skipper unit securely

in place

The post twists into the base.

The Skipper unit then simply clicks into

place on the top of the post with an

interference fit.

Green SilverRedOrange Blue Yellow

Available stock colours

Width: 125mm Height: 1m 4.9” 39.4”

Depth: 125mm Weight: 1.1kg 4.9” 39.3oz

Product Specifications (base)

Width: 500mm Height: 125mm 19.7” 4.9”

Depth: 500mm Weight: 1.2kg 19.7” 42.5oz