POS - Amazon S3 · use a wired connection for your Rezku POS registers setup is easy with the...

POSa project guide to rezku

IPAD LAN SETTINGS(Wired Networking Option)

POS

(844) 697-3958sales@guestinnovations.comCopyright © 2017 Guest Innovations, Inc. All Rights Reserved.

� Hardware� Turn Off iPad WiFi� Hardware Connections• Test Networking

In some environments, using wired networking is preferable to WiFi. If you’d prefer to use a wired connection for your Rezku POS registers setup is easy with the adapters supplied by Guest Innovations.

(844) 697-3958sales@guestinnovations.comCopyright © 2017 Guest Innovations, Inc. All Rights Reserved. 1

iPad LAN Settings (Wired Networking Option)

Hardware

1. A router

(A hub may be required if there aren’t enough open ports on your router)

2. iPad USB (Camera) adaptor

3. MobLock USB LAN adaptor

4. A networking cable that is long enough to reach from the router to the register

(844) 697-3958sales@guestinnovations.comCopyright © 2017 Guest Innovations, Inc. All Rights Reserved. 2

Turn Off iPad Wi-Fi

� Tap Settings on the iPad’s Home Screen

� Tap Wi-Fi Settings and turn off Wi-Fi by tapping the toggle switch so it’s white, not green.

Now set up the hardware.

(844) 697-3958sales@guestinnovations.comCopyright © 2017 Guest Innovations, Inc. All Rights Reserved. 3

Hardware Connections

Test Networking

1. Plug the USB (camera) adaptor into the lightning port on your iPad.

2. Plug the MobiLock LAN adaptor into the USB port of the USB adaptor.

3. Plug your network cable into the MobiLock LAN adaptor.

4. Plug the other end of the network cable into your router (which should already be configured)

To keep your iPad charged, use the lightning port on the USB camera adaptor to plug in an iPad charging cable.

To test your iPad’s network, tap Safari on your iPad’s Home screen.

(844) 697-3958sales@guestinnovations.comCopyright © 2017 Guest Innovations, Inc. All Rights Reserved. 4

� In the address bar, type RezkuPOS.com