pompa-sentrifugal

Slide No: ١Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

PROCESS ROTATING EQUIPMENT

(CENTRIFUGAL PUMPS )

CENTRIFUGAL PUMPS

Slide No: ٢Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Pumps can be divided into two main groups:

• Displacement pumps

• Dynamic pumps

CENTRIFUGAL PUMPS

Slide No: ٣Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

CENTRIFUGAL PUMPS

Slide No: ٤Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

CENTRIFUGAL PUMPS

Slide No: ٥Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

CENTRIFUGAL PUMPS

Slide No: ٦Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Axial horizontal split case pump

BASIC CENTRIFUGAL PUMP PARTS

Casing

CENTRIFUGAL PUMPS

Slide No: ٧Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Multistage axial horizontal split case Pump

CENTRIFUGAL PUMPS

Slide No: ٨Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Single stage axial vertical split case pump

CENTRIFUGAL PUMPS

Slide No: ٩Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Barrel casing

CENTRIFUGAL PUMPS

Slide No: ١٠Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Impellers

CENTRIFUGAL PUMPS

Slide No: ١١Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Shafts

CENTRIFUGAL PUMPS

Slide No: ١٢Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Bearings

Partially filled

CENTRIFUGAL PUMPS

Slide No: ١٣Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Bearings

Grease lubricated

CENTRIFUGAL PUMPS

Slide No: ١٤Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Bearings

CENTRIFUGAL PUMPS

Slide No: ١٥Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Spherical bearings

CENTRIFUGAL PUMPS

Slide No: ١٦Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Sleeve bearings

CENTRIFUGAL PUMPS

Slide No: ١٧Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Thrust bearings

CENTRIFUGAL PUMPS

Slide No: ١٨Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Stuffing Boxes

CENTRIFUGAL PUMPS

Slide No: ١٩Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

CENTRIFUGAL PUMPS

Slide No: ٢٠Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Packing and seals

CENTRIFUGAL PUMPS

Slide No: ٢١Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Packing and seals

CENTRIFUGAL PUMPS

Slide No: ٢٢Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Mechanical seal

CENTRIFUGAL PUMPS

Slide No: ٢٣Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Wearing Rings:

CENTRIFUGAL PUMPS

Slide No: ٢٤Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Couplings

Chain coupling

CENTRIFUGAL PUMPS

Slide No: ٢٥Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Diaphragm coupling

CENTRIFUGAL PUMPS

Slide No: ٢٦Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Elastomeric coupling:

CENTRIFUGAL PUMPS

Slide No: ٢٧Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Flexible Disc coupling:

CENTRIFUGAL PUMPS

Slide No: ٢٨Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Flexible link coupling:

CENTRIFUGAL PUMPS

Slide No: ٢٩Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Gear coupling

CENTRIFUGAL PUMPS

Slide No: ٣٠Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Leaf spring coupling:

CENTRIFUGAL PUMPS

Slide No: ٣١Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Metallic Grid coupling:

CENTRIFUGAL PUMPS

Slide No: ٣٢Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Metallic Grid coupling:

CENTRIFUGAL PUMPS

Slide No: ٣٣Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Pin Drive Coupling:

CENTRIFUGAL PUMPS

Slide No: ٣٤Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

TYPES OF CENTRIFUGAL PUMPS

Volute

Diffuser

Regenerative - Turbine

Mixed-flow

Axial-flow (propeller)

Single stage

Multi stage

Submersible

Can

Horizontal

CENTRIFUGAL PUMPS

Slide No: ٣٥Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Volute- type pumps:

CENTRIFUGAL PUMPS

Slide No: ٣٦Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Diffuser-type pump

CENTRIFUGAL PUMPS

Slide No: ٣٧Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Turbine-type pumps

CENTRIFUGAL PUMPS

Slide No: ٣٨Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Mixed flow type pumps

CENTRIFUGAL PUMPS

Slide No: ٣٩Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Axial flow type pumps

CENTRIFUGAL PUMPS

Slide No: ٤٠Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Single stage and multistage pumps

� There are three common types of multistage

pumps:

- Submersible

- Can

- Horizontal

CENTRIFUGAL PUMPS

Slide No: ٤١Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Vertical pumps (submersible)

CENTRIFUGAL PUMPS

Slide No: ٤٢Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Can type pumps

CENTRIFUGAL PUMPS

Slide No: ٤٣Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Horizontal

CENTRIFUGAL PUMPS

Slide No: ٤٤Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

HEAD ON A PUMP

� The amount of energy transferred to the fluid in a

centrifugal pump is called the head of the pump.

� Head is not the same as pressure. This is a very

important concept, which will be explained in the

following paragraphs

CENTRIFUGAL PUMPS

Slide No: ٤٥Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Terms and Definitions

� Pressure:

• Three pressure terms commonly arise in

pumping problems-absolute, barometric,

and gauge pressure.

• A fourth term, vacuum, is used with

installations operating below atmospheric

pressure, but it is not a pressure term in the

same sense as the first three.

CENTRIFUGAL PUMPS

Slide No: ٤٦Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Absolute pressure

• is the pressure above absolute zero.

It may be above or below the atmospheric pressure

existing at the point under consideration.

• Barometric pressure is the atmospheric pressure at

the locality being studied and varies with altitude

and climatic conditions.

• Gauge pressure is the pressure above atmospheric

at the locality where it is measured.

• A vacuum is a negative gauge pressure

CENTRIFUGAL PUMPS

Slide No: ٤٧Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Head:

• a column of water or other liquid in a vertical pipe exerts a certain pressure (force per unit area) on the horizontal surface at the bottom of the pipe.

• This pressure can be expressed in pounds per square inch (psi) or as the number of feet of liquid, which exert an equal pressure on the same surface.

• The weight of the column of liquid producing the pressure in question is known as the head on the surface.

• Note that is the weight of the liquid acting on the surface that produces the pressure.

CENTRIFUGAL PUMPS

Slide No: ٤٨Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

CENTRIFUGAL PUMPS

Slide No: ٤٩Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Static Head:

• In pump application the height of a column of liquid acting on the pump suction or discharge is often termed the static head on the inlet or outlet and is expressed as a certain number of feet of the liquid.

• Static head is a difference in elevation and can be computed for a variety of conditions surrounding a pump installation.

CENTRIFUGAL PUMPS

Slide No: ٥٠Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

�Vapour Pressure:

• Every liquid at any temperature above its freezing point exerts a pressure due to formation of vapour at its free surface.

• This pressure, known as the vapour pressure of the liquid, is afunction of the temperature of the liquid the higher the temperature, the higher the vapour pressure.

• Vapour pressure is an important factor in the suction conditions of pumps handling liquids of all types.

• In any pumping system the pressure at any point should never be reduced below the vapour pressure corresponding to the temperature of the liquid because the liquid will form vapour, which will partially or completely stop liquid flow into the pump.

CENTRIFUGAL PUMPS

Slide No: ٥١Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Static Suction Lift:

• This is the vertical distance, in feet, from the liquid supply level to the pump centreline, the pump above the supply level.

• Horizontal runs are not considered as part of the static suction lift, so far as lift is concerned

CENTRIFUGAL PUMPS

Slide No: ٥٢Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Static Suction Head:

• Where the pump is below the liquid supply level a static suction head exists.

• Numerically, it is the vertical distance, in feet, between the liquid supply level and the pump centreline.

CENTRIFUGAL PUMPS

Slide No: ٥٣Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Static Discharge Head:

• This is the vertical distance, in feet, from the pump centre line to the point of free delivery of the liquid

• Care must be exercised to see that the point of free delivery is used when computing static discharge head.

• In some layouts the exact point may be difficult to determine. This is discussed in greater detail later in this chapter.

CENTRIFUGAL PUMPS

Slide No: ٥٤Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� Total Static Head

• Total static head on a pump is the vertical distance, in feet, between the supply level and the discharge level of the liquid being handled.

� Friction Head:

• Measured in feet of the liquid handled, this is the equivalent head needed to overcome the resistance of the pipe, valves, and fitting in the pumping system, friction head exists on both the suction and discharge sides of a pump, and varies with liquid flow rate, pipe size, interior condition of the pipe, type of pipe, and nature of the liquid being handled.

CENTRIFUGAL PUMPS

Slide No: ٥٥Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

� NPSH definition:

Total inlet pressure, in meters or feet of liquid pumped determined at the pump suction connection (i.e. suction flange), minus the vapour pressure of the liquid pumped in meters or feet of liquid pumped at pumping temperature.

� Two NPSH definitions are used in pumping systems :

Net Positive Suction Head available (NPSHa),

Net Positive Suction Head required (NPSHr).

CENTRIFUGAL PUMPS

Slide No: ٥٦Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

�Cavitaion

CENTRIFUGAL PUMPS

Slide No: ٥٧Yemen LNG Technical TrainingCENTRIFUGAL PUMPS

Pitting accompanying cavitation in a Centrifugal pump